-
Viking F21287A EN - page 1
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit the Viking Web site at vikingrange.com F21287A EN (071514) Professional Indoor and Outdoor Hoods Installation Guide ...
-
Viking F21287A EN - page 2
3 NOTE: If installing hood with warming shelf panel, install warming shelf panel first. IMPORTANT – PLEASE READ AND FOLLOW • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. • Please observe all local and n ...
-
Viking F21287A EN - page 3
5 4 21” (53.3 cm) A 10” (25.4 cm) 12 ” (30.5 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 5” (12.7 cm) 21” (53.3 cm) A 12 ” (30.5 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 5” (12.7 cm) 12 ” (30.5 cm) (VWH 10” H./12”H. Wall Hoods w/Standard Ventilator 30”, & ...
-
Viking F21287A EN - page 4
6 7 * NOTE: When installing with a 24” high-shelf, the 27” (68.6 cm) max. dimensions must be used. 24”min. (61.0 cm) to 27”max.* (68.6 cm) 60”min. (152.4 cm) to 63”max. (160.0 cm) 36” (91.4 cm) A B C D 18” (4.6 cm) 3-7/8” (9.8 cm) 3-4” (1.9 cm) 7” (17.8 cm) dia. duct location Electrical hookup 1/2” (1.3 cm) 4” (10.2 cm) 3- ...
-
Viking F21287A EN - page 5
9 8 24” (61.0 cm) A 18” (45.7 cm) 12” (30.5 cm) 6” (15.2 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 42”W . 41-7/8” (106.4 cm) 48“W . 47-7/8” (121.6 cm) 60”W . 59-7/8” (152.1 cm) (VWH 18”H. 24” Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”) * A 1,200 CFM interior- or exterior-power ...
-
Viking F21287A EN - page 6
11 10 10” (25.4 cm) dia. duct location B A 30”W . 14-15/16” (37.9 cm) 36”W . 17-15/16” (45.6 cm) 42”W . 20-15/16” (53.2 cm) 48”W . 23-15/16” (60.8 cm) 60”W . 29-15/16” (76.0 cm) A 5-1/2” (14.0 cm) B 30”W . 29-7/8” (75.9 cm) 36”W . 35-7/8” (91.1 cm) 42”W . 41-7/8” (106.4 cm) 48”W . 47-7/8” (121.6 cm) 60”W . ...
-
Viking F21287A EN - page 7
13 12 27” (68.6 cm) A 18” (45.7 cm) 12” (30.5 cm) 6” (15.2 cm) A (Hood width) 36”W . 35-7/8” (91.1 cm) 48“W . 47-7/8” (121.6 cm) 60”W . 59-7/8” (152.1 cm) Seal joints with silicone. Provided on “T” Series only . (VWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”) * A 1,200 CFM interior- or exterior-power ventilator s ...
-
Viking F21287A EN - page 8
15 14 24” (61.0 cm) B A 18” (45.7 cm) 12” (30.5 cm) to 24” (61.0 cm) 6” (15.2 cm) A (Duct width) 30”W . 12“ (30.5 cm) 36”W . 12“ (30.5 cm) 42”W . 12“ (30.5 cm) 48“W . 18“ (45.7 cm) 60”W . 24“ (61.0 cm) 66”W . 24“ (61.0 cm) B (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 42”W . 41-7/8” ( ...
-
Viking F21287A EN - page 9
16 17 A 48”W . 23-15/16” (60.8 cm) 60”W . 29-15/16” (76.0 cm) 66”W . 32-15/16” (83.7 cm) C 48”W . 18” (45.7 cm) 60”W . 24” (61.0 cm) 66”W . 24” (61.0 cm) 10” (25.4 cm) dia. duct location 6” (15.2 cm) 1-1/2” (3.8 cm) 1-1/2” (3.8 cm) A B C 120 V power supply B 48”W . 47-7/8” (121.6 cm) 60”W . 59-7/8” (152.1 cm) ...
-
Viking F21287A EN - page 10
19 18 * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft (15.2 m). ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft (22.9 m). NOTE: Maximum amp rating for hoods includes recommended ventilator kit rat ...
-
Viking F21287A EN - page 11
21 20 A 54”W . 26-15/16” (68.4 cm) 66”W . 32-15/16” (83.7 cm) C 54”W . 18” (45.7 cm) 66”W . 24” (61.0 cm) 1-1/8” (2.9 cm) 1-1/8” (2.9 cm) 10” (25.4 cm) dia. duct location B A C 6” (15.2 cm) 120 V power supply B 54”W . 53-7/8” (136.8 cm) 66”W . 65-7/8” (167.3 cm) 7” (17.8 cm) dia. duct location 12” (30.5 cm) 120 V ...
-
Viking F21287A EN - page 12
23 22 (VBCV Wall Custom Ventilator System 36”, 42”, 48”, & 60”) 21-7/16” (54.5 cm) A* *For best results, center the unit over the burners of the cooking product (front to back; right to left). Wall Hoods Description A (Hood Width) 36” W. 33-7/16” (84.9 cm) 42” W. 39-7/16” (100.2 cm) 48” W. 45-7/16” (115.4 cm) 60” W. 57-7 ...
-
Viking F21287A EN - page 13
25 1-1/2” (3.81 cm) 1” (2.54 cm) 21-5/16” (54.1 cm) 21-7/8” (55.8 cm) 6” (15.2 cm) 4 1 o 17-1/4” (43.8 cm) 7/8” (2.2 cm) 1-1/2” (3.8 cm) 17-1/4” (43.8 cm) 11-1/2” (29.2 cm) 21-5/16” (54.1 cm) 6” (15.2 cm) 21-7/8” (55.8 cm) 4 1 o 9/16” (1.4 cm) D 10” (25.4 cm) dia. duct location 5-1/2” (14.0 cm) D 9/16” (1.4 cm) 7? ...
-
Viking F21287A EN - page 14
27 26 9/16” (1.4 cm) D C 10” (25.4 cm) dia. duct location 5-1/2” (14.0 cm) 1200 or 1500 CFM Exterior or In-Line Ventilator Installation 48”, 60” W. Models 9/16” (1.4 cm) C 10” (25.4 cm) dia. duct location 5-1/2” (14.0 cm) D 1200 CFM Interior Ventilator Installation 36”, 42”, 48”, 60” W. Models C 36” W. 34-1/4” (87.0 cm) ...
-
Viking F21287A EN - page 15
29 CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing. Use additional mounting screws, if necessary. Connect black to black, white to white, and the green/bare wire under the green screw. NOTE: Housing wiring must be properly installed for wiring to be correct when wir ...
-
Viking F21287A EN - page 16
31 CAUTION: Secure vent hood. Make sure mounting screws are secured into framing. Use additional mounting screws and wall anchors, if necessary. 7 5/16” n ut drive r 5 Remove electrical box cover. 1 6 2 Flip hood over. Insert 6” of electrical wiring through the top of vent hood and secure. Refer to local codes. 3 4 Attach with screws and lock w ...
-
Viking F21287A EN - page 17
33 1-13/1 6 ” (4.6 cm ) 1-1/2”x 3/4” (3.8 cm) x (1.9 cm) wood strip 1 5/16” nut driver Slot for wood strip 2 5/16” nut driver Measure down 1-13/16 (4.6 cm) from desired height of hood and secure 1-1/2” x 3/4” wood strip (provided locally) to wall using screws provided. Use additional mounting screws to secure hood to wood strip. 3 5/1 ...
-
Viking F21287A EN - page 18
35 3 4 2 Place duct cover top inside duct cover base and lower until desired height is found. Mark height. Use the retaining nuts and bolts to fasten in place and remove tape. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. 1 2 Measure distance from ceiling to canopy. Tape to avoid scratching. 34 1 ...
-
Viking F21287A EN - page 19
37 4 5/16” nut driver Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape. 3 T o install ventillation kit refer to ventillation kit installation instructions. Run duct work down to bottom edge of duct cover/soffit and secure in place. Make sure the duct does not stick down past the cover. Slide filter front over front ...
-
Viking F21287A EN - page 20
38 39 If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area. Have the following information readily available. • Model number • Serial number • Date purchased • Name of dealer from whom purchased Clearly describe the proble ...
Haben Sie eine Frage bezüglich Viking F21287A EN?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Viking F21287A EN nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Viking F21287A EN hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.