Bedienungsanleitung Pelco C2461M-A

16 Seiten 0.43 mb
Download

Zur Seite of 16

Summary
  • Pelco C2461M-A - page 1

    150 Series Camclosure ® Integrated Camera System with LowLight ™ DSS T echnology C2461M-A (7/03) ® INST ALLA TION/OPERA TION In-Ceiling Mount ...

  • Pelco C2461M-A - page 2

    2 C2461M-A (7/03) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ..................................................................................... 3 WELCOME .......................................................................................................................................... 4 INST ALL THE BACK BOX ................ ...

  • Pelco C2461M-A - page 3

    C2461M-A (7/03) 3 Heater elements could be hot! When camera power is on, use caution when adjusting the camera. CAUTION IMPORT ANT SAFEGUARDS AND WARNINGS 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes. 2. Unless the unit is specifically marked as a NEMA T ype 3, 3R, 3S, 4, 4X, 6, or ...

  • Pelco C2461M-A - page 4

    4 C2461M-A (7/03) WELCOME Thank you for purchasing Pelco’ s Camclosure ® integrated camera system with LowLight ™ , DSS (digital slow shutter) technology . Y our new ICS150 Series in-ceiling dome system includes a high- resolution, low light, color camera with auto iris and varifocal lens. The LowLight color camera has extended DSS settings to ...

  • Pelco C2461M-A - page 5

    C2461M-A (7/03) 5 INST ALL THE BACK BOX REMOVE THE LOWER DOME Loosen the tamper -resistant screws with the supplied 1/8-inch hollow screwdriver bit. Remove the lower dome and place it to the side. INST ALL THE BACK BOX The installation methods for the ICS150 back box include the following: • Attach Directly to a Wall/Ceiling • Attach to a 4S De ...

  • Pelco C2461M-A - page 6

    6 C2461M-A (7/03) Attach to a 4S Deep Electrical Box Refer to Figure 2 for the following steps. The installation instructions assume that the 4S box was previously installed. 1. Attach adapter plate to the 4S box with the two 8-32 x .750-inch screws supplied. 2. Connect the video cable. 3. Connect the power wires. V oltage Red Wire Black Wire 12 VD ...

  • Pelco C2461M-A - page 7

    C2461M-A (7/03) 7 Install in a Ceiling T ile Refer to Figure 3 for the following steps. 1. Cut a hole 3.5 inches (9 cm) in diameter in the ceiling tile for the back box. Use the adapter plate as a template. 2. Punch four screw holes in the ceiling tile. Use the four threaded screw holes in the adapter plate as a template. 3. Attach the back box to ...

  • Pelco C2461M-A - page 8

    8 C2461M-A (7/03) Figure 4. Heater Jumper and Camera Connector Locations INST ALL THE CAMERA MODULE CHECK HEA TER JUMPER The Camclosure is equipped with a heater to defrost the dome. Some installations may not require this heater . If the unit will never be subjected to a frost temperature, you can disable the heater , saving power requirements. T ...

  • Pelco C2461M-A - page 9

    C2461M-A (7/03) 9 Wall Mounting - The camera bracket tab points out of the enclosure and the top of the camera points up towards the tab. Ceiling Mounting - The camera bracket tab points out of the enclosure and the top of the camera is pointed in the opposite direction. CAMERA BRACKET T AB AL WA YS POINTS OUT OF THE ENCLOSURE TOP OF CAMERA CAMERA ...

  • Pelco C2461M-A - page 10

    10 C2461M-A (7/03) Figure 5. Default Switch Settings and Location of Camera Adjustments ZOOM/FOCUS 1. Select a field of view by turning the zoom adjustment ring clockwise/counterclockwise. Refer to Figure 5. 2. T ighten the zoom locking screw . 3. Adjust the focus by moving the focus locking screw clockwise/counterclockwise. 4. T ighten the focus l ...

  • Pelco C2461M-A - page 11

    C2461M-A (7/03) 11 ON OFF DIGIT AL SLOW SHUTTER (DSS) Digital slow shutter slows the picture frame rate and increases the camera sensitivity under low light conditions. Depending on the number of fields of integration the picture will develop a granular appearance and motion may show some lag, resulting in a stereoscopic effect or streaking on fast ...

  • Pelco C2461M-A - page 12

    12 C2461M-A (7/03) VERTICAL PHASE ADJUSTMENT (24 V AC OPERA TION ONL Y) When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate ver tical roll reverse the 24 VAC connections on one camera. If both cameras are connected to the same transformer , this should solve the ...

  • Pelco C2461M-A - page 13

    C2461M-A (7/03) 13 Figure 6. Dome and Trim Ring Installation REINST ALL THE DOME AND TRIM RING Place the trim ring and dome over the back box. If the dome has a liner , position the viewing window over the lens of the camera. T ighten the tamper -resistant screws with the supplied 1/8-inch hollow screwdriver bit. Note that the screws are installed ...

  • Pelco C2461M-A - page 14

    14 C2461M-A (7/03) SPECIFICA TIONS BACKBOX Electrical Input V oltage: 12 VDC or 24 V AC, ± 10%, auto-sensing Power Consumption: 13 watts or less Video Connector: BNC General Operating T emperature: -50 ° to 122 ° F (-46 ° to 50 ° C) De-ices to 25 ° F (-4 ° C) Pan/T ilt Adjustment: Manual; 360 ° pan; 180 ° tilt Construction: Aluminum with s ...

  • Pelco C2461M-A - page 15

    C2461M-A (7/03) 15 REVISION HISTORY Manual # Date Comments C2461M 4/03 Preliminary manual for beta testing. C2461M-A 7/03 Final version. ® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco. © Copyright 2003, Pelco. All rights reserved. WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repa ...

  • Pelco C2461M-A - page 16

    World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada ® ...

Produzent Pelco Kategorie Home Security System

Dokumente, die wir vom Produzenten des Geräts Pelco C2461M-A erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Pelco
- Bedienungsanleitungen C2461M-A
- Produktkarten Pelco
- Informationsbroschüren
- oder Energieetiketten Pelco C2461M-A
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Pelco C2461M-A.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Pelco C2461M-A, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Pelco C2461M-A. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Pelco C2461M-A ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Pelco C2461M-A, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Pelco C2461M-A hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Pelco C2461M-A verständlich ist.

Eine gänzliche Bedienungsanleitung von Pelco sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Pelco C2461M-A bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Pelco C2461M-A befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Pelco C2461M-A, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Pelco C2461M-A - die uns die ersten Schritte während der Nutzung von Pelco C2461M-A erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Pelco C2461M-A hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Pelco C2461M-A im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Pelco C2461M-A?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Pelco C2461M-A nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Pelco C2461M-A hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)