Bedienungsanleitung ParaBody 848

18 Seiten 0.4 mb
Download

Zur Seite of 18

Summary
  • ParaBody 848 - page 1

    1 848 LA T OPTION CLASS H PAR T # 7080301 REV . B Revision: 07/10/01 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product. V ersion: 848107 ...

  • ParaBody 848 - page 2

    THERE IS A RISK ASSU MED BY IND IVIDUALS W HO USE T HI S TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULE S ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine. 2. Obtain a medica l exam bef ore begi nning any exercise pro gram. 3. Keep body a ...

  • ParaBody 848 - page 3

    IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 848 LA T OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * Rubber mallet or hammer * 3/4” wrench * 9/16” wrench * Ratchet ...

  • ParaBody 848 - page 4

    4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 P AR TS LIST PA R T # 6826608 6826908 6825408 6827208 6825502 6275302 6274402 6542402 6824801 3103102 31 16201 6177001 6405201 6467001 6692601 6825101 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 QTY 1 1 1 1 1 1 1 2 2 4 6 2 4 2 3 1 PA R T # 31 16001 6140701 3102501 3102802 3102502 3102801 3102933 3102903 3102922 ...

  • ParaBody 848 - page 5

    FIGURE 1 STEP 1: • SECUREL Y assemble the one 3/8 X 2-3/4” BOL T (25), two 3/8” W ASHERS (19), and one 3/8” LOCK NUT (20) to the ST AND (3) as shown in FIGURE 1. • Assemble two 2” SQ. COVER CAPS (14) onto the ends of the ST AND (3) as shown in FIGURE 1. • Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGUR ...

  • ParaBody 848 - page 6

    6 FIGURE 4 STEP 3: • Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3. • Assemble two 2-1/2 X 5-1/2” NON-SKID STRIPS (12) to the CROSS BRACE (4) as shown in FIGURE 3. FIGURE 3 STEP 4: • SECUREL Y attach one 1-1/4” SQ. RUBBER BUMPER (17) to the CARRIAGE (5) as shown in FIGURE 4. • Insert ...

  • ParaBody 848 - page 7

    7 STEP 5: FIGURE 5 • Slide the CARRIAGE (5) over the UPRIGHT (2) as shown in FIGURE 5. • Assemble the ST AND (3) to the UPRIGHT (2) as shown in FIGURE 5. 1 3 5 2 • Assemble the BASE (1) to the UPRIGHT (2) as shown in FIGURE 5. ...

  • ParaBody 848 - page 8

    STEP 6: FIGURE 6 • SECUREL Y assemble the BASE (1) to the UPRIGHT (2) using one 1/2 X 3” BOL T (27), two 1/2” W ASHERS (21) (slide front washer INSIDE of tube) , and one 1/2” LOCK NUT (22). See FIGURE 6. • Insert one 3 X 2” END CAP (15) and one 2” SQ. END CAP (13) into the ends of the UPRIGHT (2) as shown in FIGURE 6. • SECUREL Y as ...

  • ParaBody 848 - page 9

    9 STEP 7: FIGURE 7 • Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7. • SECUREL Y assemble three 3-1/2” PULLEYS (1 1) into the slots of the UPRIGHT (2) using three 3/8 X 2-3/4” BOL TS (25), six 3/8” FLANGE SP ACERS (31), and three 3/8” LOCK NUTS (20) as shown in FIGURE 7. (NOTE: Make sure the cable is r outed over all t ...

  • ParaBody 848 - page 10

    10 STEP 8: FIGURE 8 23 3/8 X 2” 19 19 20 9 8 29 2 5 • Place one 3-1/2” PULLEY (11) into the loop of the CABLE (9) below the second and third PULLEY of the UPRIGHT (2) as shown in FIGURE 8. • LOOSEL Y assemble two 3/16 X 1-3/4 X 5-1/4” PLA TES (8) to each side of the 3-1/2” PULLEY (11) using one 3/8 X 2” BOL T (23), two 3/8” W ASHERS ...

  • ParaBody 848 - page 11

    11 STEP 9: FIGURE 9 23 3/8 X 2” 19 19 20 9 11 2 • Route the end of the second CABLE (9) through the slot on the UPRIGHT (2) then SECUREL Y assemble one 3-1/2” PULLEY (1 1) to the UPRIGHT (2) using two 3/8 X 2-1/2” BOL TS (24), two 3/8 X 3/8” SP ACERS (30), four 3/8” W ASHERS (19), and two 3/8” LOCK NUTS (20). (NOTE: The CABLE (9) shou ...

  • ParaBody 848 - page 12

    12 STEP 10: FIGURE 10 • SECUREL Y assemble the CABLE (9) to the BASE (1) using one 3/8 X 4-1/2” BOL T (26), one 3/8 X 1” SP ACER (32), and one 3/8” LOCK NUT (20) as shown in FIGURE 10. 9 26 3/8 X 4-1/2” 1 32 20 0 1 2 34 1/2 1/2 1/2 1/2 ...

  • ParaBody 848 - page 13

    13 STEP 1 1: FIGURE 1 1 • Attach the LA T BAR (6) to the ball end of the upper CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11. • Attach the LOW ROW BAR (7) to the ball end of the lower CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11. • Slide two 1 X 8” GRIPS (10) on the LOW ROW BAR (7) and two 1 X 8” GRI ...

  • ParaBody 848 - page 14

    STEP 12: FIGURE 12 • Tilt the 848101 back and remove the ST AND (3) as shown in FIGURE 12. • T o use the 848101 LA T OPTION: (NOTE: LA T OPTION MUST BE USED WITH A BENCH. LA T OPTION CANNOT BE USED WHILE ST AND IS A TT ACHED. ST AND MUST BE A TT ACHED WITH THE FEET OUT AS SHOWN.) 14 3 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...

  • ParaBody 848 - page 15

    Thank you for pur chasing the Parabody 848 LA T OPTION. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. BENCH 2 STEP 13: FIGURE 13 • Insert the UPRIGHT (2) of the 848 into the bench as shown in FIGURE 13. 15 ...

  • ParaBody 848 - page 16

    MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 16 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your ParaBody customer service repr ...

  • ParaBody 848 - page 17

    17 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED W ARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody . T erms: Lifetime ? ...

  • ParaBody 848 - page 18

    INTERNA TIONAL OFFICES LifeFitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 LifeFitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 LifeFitness (UK) Ltd. Queen Adelaide Ely ...

Produzent ParaBody Kategorie Home Gym

Dokumente, die wir vom Produzenten des Geräts ParaBody 848 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen ParaBody
- Bedienungsanleitungen 848
- Produktkarten ParaBody
- Informationsbroschüren
- oder Energieetiketten ParaBody 848
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung ParaBody 848.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen ParaBody 848, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen ParaBody 848. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts ParaBody 848 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts ParaBody 848, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von ParaBody 848 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von ParaBody 848 verständlich ist.

Eine gänzliche Bedienungsanleitung von ParaBody sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von ParaBody 848 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von ParaBody 848 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich ParaBody 848, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts ParaBody 848 - die uns die ersten Schritte während der Nutzung von ParaBody 848 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit ParaBody 848 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von ParaBody 848 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich ParaBody 848?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ParaBody 848 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ParaBody 848 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)