English dropdown-ico

Manual ParaBody 848

18 pages 0.4 mb
Download

Go to site of 18

Summary
  • ParaBody 848 - page 1

    1 848 LA T OPTION CLASS H PAR T # 7080301 REV . B Revision: 07/10/01 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product. V ersion: 848107 ...

  • ParaBody 848 - page 2

    THERE IS A RISK ASSU MED BY IND IVIDUALS W HO USE T HI S TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULE S ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine. 2. Obtain a medica l exam bef ore begi nning any exercise pro gram. 3. Keep body a ...

  • ParaBody 848 - page 3

    IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 848 LA T OPTION. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * Rubber mallet or hammer * 3/4” wrench * 9/16” wrench * Ratchet ...

  • ParaBody 848 - page 4

    4 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 P AR TS LIST PA R T # 6826608 6826908 6825408 6827208 6825502 6275302 6274402 6542402 6824801 3103102 31 16201 6177001 6405201 6467001 6692601 6825101 KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 QTY 1 1 1 1 1 1 1 2 2 4 6 2 4 2 3 1 PA R T # 31 16001 6140701 3102501 3102802 3102502 3102801 3102933 3102903 3102922 ...

  • ParaBody 848 - page 5

    FIGURE 1 STEP 1: • SECUREL Y assemble the one 3/8 X 2-3/4” BOL T (25), two 3/8” W ASHERS (19), and one 3/8” LOCK NUT (20) to the ST AND (3) as shown in FIGURE 1. • Assemble two 2” SQ. COVER CAPS (14) onto the ends of the ST AND (3) as shown in FIGURE 1. • Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGUR ...

  • ParaBody 848 - page 6

    6 FIGURE 4 STEP 3: • Assemble one 17-1/2” FOAM STRIP (16) to the underside of the CROSS BRACE (4) as shown in FIGURE 3. • Assemble two 2-1/2 X 5-1/2” NON-SKID STRIPS (12) to the CROSS BRACE (4) as shown in FIGURE 3. FIGURE 3 STEP 4: • SECUREL Y attach one 1-1/4” SQ. RUBBER BUMPER (17) to the CARRIAGE (5) as shown in FIGURE 4. • Insert ...

  • ParaBody 848 - page 7

    7 STEP 5: FIGURE 5 • Slide the CARRIAGE (5) over the UPRIGHT (2) as shown in FIGURE 5. • Assemble the ST AND (3) to the UPRIGHT (2) as shown in FIGURE 5. 1 3 5 2 • Assemble the BASE (1) to the UPRIGHT (2) as shown in FIGURE 5. ...

  • ParaBody 848 - page 8

    STEP 6: FIGURE 6 • SECUREL Y assemble the BASE (1) to the UPRIGHT (2) using one 1/2 X 3” BOL T (27), two 1/2” W ASHERS (21) (slide front washer INSIDE of tube) , and one 1/2” LOCK NUT (22). See FIGURE 6. • Insert one 3 X 2” END CAP (15) and one 2” SQ. END CAP (13) into the ends of the UPRIGHT (2) as shown in FIGURE 6. • SECUREL Y as ...

  • ParaBody 848 - page 9

    9 STEP 7: FIGURE 7 • Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7. • SECUREL Y assemble three 3-1/2” PULLEYS (1 1) into the slots of the UPRIGHT (2) using three 3/8 X 2-3/4” BOL TS (25), six 3/8” FLANGE SP ACERS (31), and three 3/8” LOCK NUTS (20) as shown in FIGURE 7. (NOTE: Make sure the cable is r outed over all t ...

  • ParaBody 848 - page 10

    10 STEP 8: FIGURE 8 23 3/8 X 2” 19 19 20 9 8 29 2 5 • Place one 3-1/2” PULLEY (11) into the loop of the CABLE (9) below the second and third PULLEY of the UPRIGHT (2) as shown in FIGURE 8. • LOOSEL Y assemble two 3/16 X 1-3/4 X 5-1/4” PLA TES (8) to each side of the 3-1/2” PULLEY (11) using one 3/8 X 2” BOL T (23), two 3/8” W ASHERS ...

  • ParaBody 848 - page 11

    11 STEP 9: FIGURE 9 23 3/8 X 2” 19 19 20 9 11 2 • Route the end of the second CABLE (9) through the slot on the UPRIGHT (2) then SECUREL Y assemble one 3-1/2” PULLEY (1 1) to the UPRIGHT (2) using two 3/8 X 2-1/2” BOL TS (24), two 3/8 X 3/8” SP ACERS (30), four 3/8” W ASHERS (19), and two 3/8” LOCK NUTS (20). (NOTE: The CABLE (9) shou ...

  • ParaBody 848 - page 12

    12 STEP 10: FIGURE 10 • SECUREL Y assemble the CABLE (9) to the BASE (1) using one 3/8 X 4-1/2” BOL T (26), one 3/8 X 1” SP ACER (32), and one 3/8” LOCK NUT (20) as shown in FIGURE 10. 9 26 3/8 X 4-1/2” 1 32 20 0 1 2 34 1/2 1/2 1/2 1/2 ...

  • ParaBody 848 - page 13

    13 STEP 1 1: FIGURE 1 1 • Attach the LA T BAR (6) to the ball end of the upper CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11. • Attach the LOW ROW BAR (7) to the ball end of the lower CABLE (9) using one 5/16” SNAP HOOK (28) as shown in FIGURE 11. • Slide two 1 X 8” GRIPS (10) on the LOW ROW BAR (7) and two 1 X 8” GRI ...

  • ParaBody 848 - page 14

    STEP 12: FIGURE 12 • Tilt the 848101 back and remove the ST AND (3) as shown in FIGURE 12. • T o use the 848101 LA T OPTION: (NOTE: LA T OPTION MUST BE USED WITH A BENCH. LA T OPTION CANNOT BE USED WHILE ST AND IS A TT ACHED. ST AND MUST BE A TT ACHED WITH THE FEET OUT AS SHOWN.) 14 3 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...

  • ParaBody 848 - page 15

    Thank you for pur chasing the Parabody 848 LA T OPTION. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. BENCH 2 STEP 13: FIGURE 13 • Insert the UPRIGHT (2) of the 848 into the bench as shown in FIGURE 13. 15 ...

  • ParaBody 848 - page 16

    MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 16 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your ParaBody customer service repr ...

  • ParaBody 848 - page 17

    17 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED W ARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody . T erms: Lifetime ? ...

  • ParaBody 848 - page 18

    INTERNA TIONAL OFFICES LifeFitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 LifeFitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 LifeFitness (UK) Ltd. Queen Adelaide Ely ...

Manufacturer ParaBody Category Home Gym

Documents that we receive from a manufacturer of a ParaBody 848 can be divided into several groups. They are, among others:
- ParaBody technical drawings
- 848 manuals
- ParaBody product data sheets
- information booklets
- or energy labels ParaBody 848
All of them are important, but the most important information from the point of view of use of the device are in the user manual ParaBody 848.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ParaBody 848, service manual, brief instructions and user manuals ParaBody 848. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ParaBody 848.

Similar manuals

A complete manual for the device ParaBody 848, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ParaBody 848 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ParaBody 848.

A complete ParaBody manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ParaBody 848 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ParaBody 848, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ParaBody 848, that we can find in the current document
3. Tips how to use the basic functions of the device ParaBody 848 - which should help us in our first steps of using ParaBody 848
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ParaBody 848
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ParaBody 848 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ParaBody 848?

Use the form below

If you did not solve your problem by using a manual ParaBody 848, ask a question using the form below. If a user had a similar problem with ParaBody 848 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)