Bedienungsanleitung Delta 31-552

12 Seiten 0.39 mb
Download

Zur Seite of 12

Summary
  • Delta 31-552 - page 1

    INSTRUCTION MANUAL 6" Abrasive Belt Finishing Machine (Model 31-552) P ART NO. 406-03-651-0017 (0110) Copyright © 2001 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). 6" A ...

  • Delta 31-552 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...

  • Delta 31-552 - page 3

    ADDITIONAL SAFETY RULES FOR ABRASIVE BEL T FINISHING MACHINES 3 WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y SA VE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. 1. DO NOT OPERA TE THIS MACHINE UNTIL it is assembled and installed accor ding to the instructions. 2. OBT AIN ADVICE from you ...

  • Delta 31-552 - page 4

    4 POWER CONNECTIONS IMPORT ANT : Make sure the electrical characteristics ar e the same between the motor nameplate and the power source and make sur e the power cir cuit the machine will be used on is properly fused and that wir e size is corr ect. IN ALL CASES, MAKE SURE THE RECEPT ACLE IN QUESTION IS PROPERL Y GROUNDED. WARNING: DO NOT EXPOSE TH ...

  • Delta 31-552 - page 5

    5 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and matching r eceptacle which will accept the machine’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the curr ent of the machine. An undersized cord will ca ...

  • Delta 31-552 - page 6

    6 ASSEMBL Y ST AND AND ELECTRICALS If you purchased your machine with the optional steel stand and electricals, the stand is shipped as shown in Fig. 2. The switch (A) Fig. 2 and motor (B) Fig. 3 are completely assembled to the stand and the necessary wiring from the motor to the switch has been completed. ASSEMBLING MACHINE TO ST AND Place the mac ...

  • Delta 31-552 - page 7

    7 ALIGNING PULLEYS, ASSEMBLING BEL T AND ADJUSTING BEL T TENSION DISCONNECT MACHINE FROM POWER SOURCE Using a straight edge (A) Fig. 6, make certain the motor pulley (B) is aligned with the arbor pulley . If necessary , the motor pulley (B) can be adjusted on the motor shaft by loosening set screw (C) and moving the motor pulley (B) in or out as ne ...

  • Delta 31-552 - page 8

    8 OPERA TING CONTROLS AND ADJUSTMENTS ST AR TING AND STOPPING THE ABRASIVE FINISHING MACHINE T o start the machine, push “ON” button (A) Fig. 10. T o stop the machine, push “OFF” button (B). Fig. 10 A B LOCKING SWITCH IN THE “OFF” POSITION IMPORT ANT : When the machine is not in use, the switch should be locked in the OFF position using ...

  • Delta 31-552 - page 9

    9 ADJUSTING T ABLE DISCONNECT MACHINE FROM POWER SOURCE. T o tilt the table, loosen the table tilting handle (A) Fig. 15, move the table to the desired angle, and tighten the table tilting handle. The table tilting handle can be reposition- ed by pulling out the handle and repositioning it on the hex nut located underneath the handle. Positive tabl ...

  • Delta 31-552 - page 10

    10 INST ALLING OR REMOVING ABRASIVE BEL T Y our machine uses a 6"x48" belt. T o install or remove the belt, proceed as follows: DISCONNECT MACHINE FROM POWER SOURCE. 1. Remove the idler drum guard (A) and side guar d (B) Fig. 20. 2. T ur n the belt tension handle counter clockwise to reduce belt tension to a minimum. NOTE: It may be neces ...

  • Delta 31-552 - page 11

    11 ABRASIVE BEL TS - THEIR SELECTION AND USE Delta supplies a wide range of belts for use on your Finishing Machine. These belts are r ecommended for a wide range of work on wood, metals, plastics and other materials. However , when a large amount of pr oduction work of one kind is to be done, it is best to call in a coated abrasive specialist for ...

  • Delta 31-552 - page 12

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): BAMMER ® , INNOV A TION THA T WORKS ® , JETSTREAM ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , POR T A-BAND ® , PORT A-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , SA W BOSS ® , SPEED-BLOC ® , SPEEDMA TIC ...

Produzent Delta Kategorie Sander

Dokumente, die wir vom Produzenten des Geräts Delta 31-552 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Delta
- Bedienungsanleitungen 31-552
- Produktkarten Delta
- Informationsbroschüren
- oder Energieetiketten Delta 31-552
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Delta 31-552.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Delta 31-552, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Delta 31-552. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Delta 31-552 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Delta 31-552, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Delta 31-552 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Delta 31-552 verständlich ist.

Eine gänzliche Bedienungsanleitung von Delta sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Delta 31-552 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Delta 31-552 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Delta 31-552, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Delta 31-552 - die uns die ersten Schritte während der Nutzung von Delta 31-552 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Delta 31-552 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Delta 31-552 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Delta 31-552?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Delta 31-552 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Delta 31-552 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)