English dropdown-ico

Manual Delta 31-552

12 pages 0.39 mb
Download

Go to site of 12

Summary
  • Delta 31-552 - page 1

    INSTRUCTION MANUAL 6" Abrasive Belt Finishing Machine (Model 31-552) P ART NO. 406-03-651-0017 (0110) Copyright © 2001 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). 6" A ...

  • Delta 31-552 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...

  • Delta 31-552 - page 3

    ADDITIONAL SAFETY RULES FOR ABRASIVE BEL T FINISHING MACHINES 3 WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y SA VE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. 1. DO NOT OPERA TE THIS MACHINE UNTIL it is assembled and installed accor ding to the instructions. 2. OBT AIN ADVICE from you ...

  • Delta 31-552 - page 4

    4 POWER CONNECTIONS IMPORT ANT : Make sure the electrical characteristics ar e the same between the motor nameplate and the power source and make sur e the power cir cuit the machine will be used on is properly fused and that wir e size is corr ect. IN ALL CASES, MAKE SURE THE RECEPT ACLE IN QUESTION IS PROPERL Y GROUNDED. WARNING: DO NOT EXPOSE TH ...

  • Delta 31-552 - page 5

    5 Use proper extension cor ds. Make sur e your extension cord is in good condition and is a 3-wir e extension cor d which has a 3-prong gr ounding type plug and matching r eceptacle which will accept the machine’ s plug. When using an extension cord, be sur e to use one heavy enough to carry the curr ent of the machine. An undersized cord will ca ...

  • Delta 31-552 - page 6

    6 ASSEMBL Y ST AND AND ELECTRICALS If you purchased your machine with the optional steel stand and electricals, the stand is shipped as shown in Fig. 2. The switch (A) Fig. 2 and motor (B) Fig. 3 are completely assembled to the stand and the necessary wiring from the motor to the switch has been completed. ASSEMBLING MACHINE TO ST AND Place the mac ...

  • Delta 31-552 - page 7

    7 ALIGNING PULLEYS, ASSEMBLING BEL T AND ADJUSTING BEL T TENSION DISCONNECT MACHINE FROM POWER SOURCE Using a straight edge (A) Fig. 6, make certain the motor pulley (B) is aligned with the arbor pulley . If necessary , the motor pulley (B) can be adjusted on the motor shaft by loosening set screw (C) and moving the motor pulley (B) in or out as ne ...

  • Delta 31-552 - page 8

    8 OPERA TING CONTROLS AND ADJUSTMENTS ST AR TING AND STOPPING THE ABRASIVE FINISHING MACHINE T o start the machine, push “ON” button (A) Fig. 10. T o stop the machine, push “OFF” button (B). Fig. 10 A B LOCKING SWITCH IN THE “OFF” POSITION IMPORT ANT : When the machine is not in use, the switch should be locked in the OFF position using ...

  • Delta 31-552 - page 9

    9 ADJUSTING T ABLE DISCONNECT MACHINE FROM POWER SOURCE. T o tilt the table, loosen the table tilting handle (A) Fig. 15, move the table to the desired angle, and tighten the table tilting handle. The table tilting handle can be reposition- ed by pulling out the handle and repositioning it on the hex nut located underneath the handle. Positive tabl ...

  • Delta 31-552 - page 10

    10 INST ALLING OR REMOVING ABRASIVE BEL T Y our machine uses a 6"x48" belt. T o install or remove the belt, proceed as follows: DISCONNECT MACHINE FROM POWER SOURCE. 1. Remove the idler drum guard (A) and side guar d (B) Fig. 20. 2. T ur n the belt tension handle counter clockwise to reduce belt tension to a minimum. NOTE: It may be neces ...

  • Delta 31-552 - page 11

    11 ABRASIVE BEL TS - THEIR SELECTION AND USE Delta supplies a wide range of belts for use on your Finishing Machine. These belts are r ecommended for a wide range of work on wood, metals, plastics and other materials. However , when a large amount of pr oduction work of one kind is to be done, it is best to call in a coated abrasive specialist for ...

  • Delta 31-552 - page 12

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): BAMMER ® , INNOV A TION THA T WORKS ® , JETSTREAM ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , POR T A-BAND ® , PORT A-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , SA W BOSS ® , SPEED-BLOC ® , SPEEDMA TIC ...

Manufacturer Delta Category Sander

Documents that we receive from a manufacturer of a Delta 31-552 can be divided into several groups. They are, among others:
- Delta technical drawings
- 31-552 manuals
- Delta product data sheets
- information booklets
- or energy labels Delta 31-552
All of them are important, but the most important information from the point of view of use of the device are in the user manual Delta 31-552.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Delta 31-552, service manual, brief instructions and user manuals Delta 31-552. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Delta 31-552.

Similar manuals

A complete manual for the device Delta 31-552, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Delta 31-552 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Delta 31-552.

A complete Delta manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Delta 31-552 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Delta 31-552, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Delta 31-552, that we can find in the current document
3. Tips how to use the basic functions of the device Delta 31-552 - which should help us in our first steps of using Delta 31-552
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Delta 31-552
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Delta 31-552 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Delta 31-552?

Use the form below

If you did not solve your problem by using a manual Delta 31-552, ask a question using the form below. If a user had a similar problem with Delta 31-552 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)