Bedienungsanleitung Garmin 906-1090-05

12 Seiten 1.49 mb
Download

Zur Seite of 12

Summary
  • Garmin 906-1090-05 - page 1

    Suzuki 9.9 2005 and Newer Suzuki 15 HP 2005 and Newer 1 906-1090-05 Throttle Actuator Installation Instructions TR-1 Gold ...

  • Garmin 906-1090-05 - page 2

    Tools Needed : Vise Grips or Similar Pliers Ratchet 12mm socket 10mm socket Extension 6mm internal Hex Bit (Allen) Torque Wrench Hacksaw #1 Phillips screw driver #3 Phillips screw driver Locktite or Similar thread locker Warning! Please Read. This application can be a difcult throttle installation, and requires the use of a Torque Wrench in the ...

  • Garmin 906-1090-05 - page 3

    Suzuki Throttle Parts Item # Part Number Description Qty. 1 120-1090-05 Throttle Actuator Assembly. Suzuki 1 3 ...

  • Garmin 906-1090-05 - page 4

    4 Step One: Disconnect motor from battery and or disconnect safety lanyard, to prevent motor from starting during throttle actuator installation Step Two: Remove Cover (cowling) from motor. Step Three: Remove the right side cover as described in the Service Manual. Figure 1 Figure 2 Figure 3 ...

  • Garmin 906-1090-05 - page 5

    5 Step Four: Pop the ring off the ball on the drive arm of the throttle actuator that’s located just below the carburetor, as seen in Figure 4. Figure 6 Step Five: Remove the Hex Cap Screw from the actuator as seen in Figures 5 & 6. Remove the Drive arm. Figure 4 Figure 5 ...

  • Garmin 906-1090-05 - page 6

    Figure 9 6 Figure 7 Modied Part Figure 8 Step Six: Modify drive arm Use a hack saw or similar to remove the left "ear" of the throttle drive arm. See Figure 7. (You can smooth the edges with a le or a piece of sand paper if needed. NOTE: The throttle lever must be free to advance with out touching the lug of the Manual throttle adva ...

  • Garmin 906-1090-05 - page 7

    Step Nine: Remove the head bolt, as indicated in Figure 11 & 11-A. 7 Figure 10 Figure 11-A Figure 11 Step Eight: Push the ring back over the ball on the drive arm, per Figure 10. ...

  • Garmin 906-1090-05 - page 8

    Figure 13 Step Ten: Use the removed cylinder head bolt to mount the throttle actuator bracket as shown. Note: Bend the loom holder out of the way temporarily to gain access to the bolt, and then bend it back into place to hold the wire loom & hose in place away from the throttle actuator as shown in Figure 13. Torque bolt 30Nm/21.5 ft.lbs 8 Fig ...

  • Garmin 906-1090-05 - page 9

    9 Figure 16 Step Twelve: Put the Nautamatic Throttle Advance bell crank (at the end of the string on the TR-1 throttle actuator) on to the throttle shaft and reinstall the lock washer and nut as in Figure 16. Step Thirteen: Push the actuator shaft (threaded rod) to the fully extended position. Adjust the throttle pull string so there is a 1/16 of a ...

  • Garmin 906-1090-05 - page 10

    Figure 18 Figure 19 Step Fourteen: Connect to Electrohydraulic unit at number 2. Be sure to seat this connection rmly. (Other connections per autopilot installation manual.) Step Fifteen: Turn the system on by pressing and releasing the Deckmount button (On/Off switch). The Deckmount will continue to ash for 30 seconds, but the throttle funct ...

  • Garmin 906-1090-05 - page 11

    Step Sixteen: Now test the Idle/Resume function by pressing and releasing the Idle/Res on the handheld. See gure 20. Be sure the Carburetor returns to the full Idle Position. Press the Idle/Res button again, the throttle should advance until the actuator is fully retracted. Step Seventeen: Press the down arrow till the actuator rod is out about ...

  • Garmin 906-1090-05 - page 12

    Step Nineteen: Re-install the lower covers of the motor. Secure Throttle cable in a position where it will not get damaged, cause problems with other parts, or get pinched between the motor frame and the covers. Reconrm that the throttle returns freely to full Idle. Step Twenty: Route the throttle control wire out of the motor covers and to the ...

Produzent Garmin Kategorie Boating Equipment

Dokumente, die wir vom Produzenten des Geräts Garmin 906-1090-05 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Garmin
- Bedienungsanleitungen 906-1090-05
- Produktkarten Garmin
- Informationsbroschüren
- oder Energieetiketten Garmin 906-1090-05
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Garmin 906-1090-05.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Garmin 906-1090-05, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Garmin 906-1090-05. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Garmin 906-1090-05 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Garmin 906-1090-05, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Garmin 906-1090-05 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Garmin 906-1090-05 verständlich ist.

Eine gänzliche Bedienungsanleitung von Garmin sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Garmin 906-1090-05 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Garmin 906-1090-05 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Garmin 906-1090-05, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Garmin 906-1090-05 - die uns die ersten Schritte während der Nutzung von Garmin 906-1090-05 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Garmin 906-1090-05 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Garmin 906-1090-05 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Garmin 906-1090-05?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Garmin 906-1090-05 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Garmin 906-1090-05 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)