English dropdown-ico

Manual Garmin 906-1090-05

12 pages 1.49 mb
Download

Go to site of 12

Summary
  • Garmin 906-1090-05 - page 1

    Suzuki 9.9 2005 and Newer Suzuki 15 HP 2005 and Newer 1 906-1090-05 Throttle Actuator Installation Instructions TR-1 Gold ...

  • Garmin 906-1090-05 - page 2

    Tools Needed : Vise Grips or Similar Pliers Ratchet 12mm socket 10mm socket Extension 6mm internal Hex Bit (Allen) Torque Wrench Hacksaw #1 Phillips screw driver #3 Phillips screw driver Locktite or Similar thread locker Warning! Please Read. This application can be a difcult throttle installation, and requires the use of a Torque Wrench in the ...

  • Garmin 906-1090-05 - page 3

    Suzuki Throttle Parts Item # Part Number Description Qty. 1 120-1090-05 Throttle Actuator Assembly. Suzuki 1 3 ...

  • Garmin 906-1090-05 - page 4

    4 Step One: Disconnect motor from battery and or disconnect safety lanyard, to prevent motor from starting during throttle actuator installation Step Two: Remove Cover (cowling) from motor. Step Three: Remove the right side cover as described in the Service Manual. Figure 1 Figure 2 Figure 3 ...

  • Garmin 906-1090-05 - page 5

    5 Step Four: Pop the ring off the ball on the drive arm of the throttle actuator that’s located just below the carburetor, as seen in Figure 4. Figure 6 Step Five: Remove the Hex Cap Screw from the actuator as seen in Figures 5 & 6. Remove the Drive arm. Figure 4 Figure 5 ...

  • Garmin 906-1090-05 - page 6

    Figure 9 6 Figure 7 Modied Part Figure 8 Step Six: Modify drive arm Use a hack saw or similar to remove the left "ear" of the throttle drive arm. See Figure 7. (You can smooth the edges with a le or a piece of sand paper if needed. NOTE: The throttle lever must be free to advance with out touching the lug of the Manual throttle adva ...

  • Garmin 906-1090-05 - page 7

    Step Nine: Remove the head bolt, as indicated in Figure 11 & 11-A. 7 Figure 10 Figure 11-A Figure 11 Step Eight: Push the ring back over the ball on the drive arm, per Figure 10. ...

  • Garmin 906-1090-05 - page 8

    Figure 13 Step Ten: Use the removed cylinder head bolt to mount the throttle actuator bracket as shown. Note: Bend the loom holder out of the way temporarily to gain access to the bolt, and then bend it back into place to hold the wire loom & hose in place away from the throttle actuator as shown in Figure 13. Torque bolt 30Nm/21.5 ft.lbs 8 Fig ...

  • Garmin 906-1090-05 - page 9

    9 Figure 16 Step Twelve: Put the Nautamatic Throttle Advance bell crank (at the end of the string on the TR-1 throttle actuator) on to the throttle shaft and reinstall the lock washer and nut as in Figure 16. Step Thirteen: Push the actuator shaft (threaded rod) to the fully extended position. Adjust the throttle pull string so there is a 1/16 of a ...

  • Garmin 906-1090-05 - page 10

    Figure 18 Figure 19 Step Fourteen: Connect to Electrohydraulic unit at number 2. Be sure to seat this connection rmly. (Other connections per autopilot installation manual.) Step Fifteen: Turn the system on by pressing and releasing the Deckmount button (On/Off switch). The Deckmount will continue to ash for 30 seconds, but the throttle funct ...

  • Garmin 906-1090-05 - page 11

    Step Sixteen: Now test the Idle/Resume function by pressing and releasing the Idle/Res on the handheld. See gure 20. Be sure the Carburetor returns to the full Idle Position. Press the Idle/Res button again, the throttle should advance until the actuator is fully retracted. Step Seventeen: Press the down arrow till the actuator rod is out about ...

  • Garmin 906-1090-05 - page 12

    Step Nineteen: Re-install the lower covers of the motor. Secure Throttle cable in a position where it will not get damaged, cause problems with other parts, or get pinched between the motor frame and the covers. Reconrm that the throttle returns freely to full Idle. Step Twenty: Route the throttle control wire out of the motor covers and to the ...

Manufacturer Garmin Category Boating Equipment

Documents that we receive from a manufacturer of a Garmin 906-1090-05 can be divided into several groups. They are, among others:
- Garmin technical drawings
- 906-1090-05 manuals
- Garmin product data sheets
- information booklets
- or energy labels Garmin 906-1090-05
All of them are important, but the most important information from the point of view of use of the device are in the user manual Garmin 906-1090-05.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Garmin 906-1090-05, service manual, brief instructions and user manuals Garmin 906-1090-05. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Garmin 906-1090-05.

Similar manuals

A complete manual for the device Garmin 906-1090-05, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Garmin 906-1090-05 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Garmin 906-1090-05.

A complete Garmin manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Garmin 906-1090-05 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Garmin 906-1090-05, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Garmin 906-1090-05, that we can find in the current document
3. Tips how to use the basic functions of the device Garmin 906-1090-05 - which should help us in our first steps of using Garmin 906-1090-05
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Garmin 906-1090-05
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Garmin 906-1090-05 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Garmin 906-1090-05?

Use the form below

If you did not solve your problem by using a manual Garmin 906-1090-05, ask a question using the form below. If a user had a similar problem with Garmin 906-1090-05 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)