Bedienungsanleitung Invacare 65400

12 Seiten 0.25 mb
Download

Zur Seite of 12

Summary
  • Invacare 65400 - page 1

    SAFETY SUMMARY (CONTINUED) INSTALLATION WARNINGS SPRINT (65400) and SPARTAN (65420) MODELS - The rollator height can ONLY be adjusted where the push handle is textured (FIGURE 4). After installation and BEFORE use, ensure that ALL attaching hardware is securely tightened. REPLACING SPRINT CANES AND BRAKES (FIGURE 1) 1 . Remove the EXISTING brake wi ...

  • Invacare 65400 - page 2

    2 B. Remove the phillips screw securing the EXIST- ING hand brake to the push handle. C. Pull the EXISTING hand brake off of the push handle. NOTE: Remove clamps/hardware located at the end of the NEW brake wire before performing the following steps. 4 . Perform one (1) of the following: INST ALLING CANE KIT - Install NEW push handle. A . T urn the ...

  • Invacare 65400 - page 3

    3 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Wire Clamp Spring ASSEMBLED DISASSEMBLED Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Wire Clamp Spring Brake Wire Hole REMOVING/INSTALLING BRAKE WIRE - STEPS 1 AND 6 Push Handle Tie Wrap Side Frame Brake Cable REMOVING ...

  • Invacare 65400 - page 4

    4 REPLACING SPARTAN CANES AND BRAKES Preparing Spartan for Brake Replacement (FIGURE 2) 1 . Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Re- move EXISTING hand brake. A . Remove the hex bolt, washer and locknut secur- ing the hand brake to the push handle. B. Remove the hand brake. INST ALLING BRAKE KIT (AFTER 3/8/00) - ...

  • Invacare 65400 - page 5

    5 Replacing Spartan Brakes (FIGURE 4) 1 . Remove the brake pad. Refer to REMOVING/IN- ST ALLING THE SP AR T AN BRAKE P AD S in this pro- cedure of the instruction sheet. 2 . Remove the plunger assembly . Perform the following: A . Pry the plunger assembly out of the rollator leg with a flat screwdriver . 3 . Remove the EXISTING brake wire stop. Per ...

  • Invacare 65400 - page 6

    6 DISASSEMBLING/ASSEMBLING THE PLUNGER ASSEMBLY - STEPS 4 AND 7 FIGURE 4 - REPLACING SPARTAN CANES AND BRAKES - REPLACING SPARTAN BRAKES Insert Plunger Spring Brake Wire Brake Wire Stop Slot Opening Brake Wire Stop Flat Screwdriver Plunger Insert Lip Slot Opening REMOVING/SECURING THE BRAKE WIRE STOP - STEPS 3 AND 8 Plunger Assembly Rear Frame Flat ...

  • Invacare 65400 - page 7

    7 B. Remove the hand brake. C. T urn the adjustment lever COUNTERCLOCK- WISE. D. Insert push handles into side frames with the hand grip facing the back of the rollator . 3. Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Install NEW hand brake. A . Position the handbrake assembly under the push handle so the lock button i ...

  • Invacare 65400 - page 8

    8 FIGURE 6 - ADJUSTING CABLE BRAKE HANDLE Cable Brake Handle Locknut Screw Mechanism Cable ADJUSTING SPRINT AND SPARTAN PUSH HANDLES (FIGURE 6) NOTE: For the most comfortable position, make sure the adjustment is performed while wearing the most frequently worn shoes. NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind t ...

  • Invacare 65400 - page 9

    9 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Clamp FIGURE 8 - ADJUSTING CABLE ADJUSTER UNIT - WHEEL ASSEMBLY - SPRINT ONLY Adjusting Cable Adjuster Unit - Wheel Assembly - MODEL 65400 ONLY (FIGURE 8 ) NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels. N ...

  • Invacare 65400 - page 10

    10 REPLACING STINGRAY AND STARGAZER BRAKES (FIGURE 10) NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing beside the rollator . 1 . Remove the EXISTING brake wire. Perform the fol- lowing: A . Loosen the hex screw securing the EXISTING brake wire to the brake. B. Loosen the caster housing nut. C. Pull EXISTING brake cable up t ...

  • Invacare 65400 - page 11

    ADJUSTING STINGRAY AND STARGAZER HAND BRAKES (FIGURE 10) Adjusting Hand Brake NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing behind the rollator (us- ers position). 1 . Loosen the hand brake adjustment nut by turning CLOCKWISE. 2 . Perform one (1) of the following: A. Loosen hand brake tension - turn hand brake nut COUNTER ...

  • Invacare 65400 - page 12

    Invacare Corporation ww w .in vacare.com U S A Canada One In vacare W ay 5970 Chedworth W a y In vacare ® and "Y es, y ou can" are trademarks of In vacare Elyria, Ohio USA Mississauga, Ontario Corporation. 44036-2125 L5R 3T9, Canada © 2001 Invacare Corporation 800-333-6900 905-890-8838 Form No. 98-146 Part No. 1076198 Rev C (1) 1/01 Rem ...

Produzent Invacare Kategorie Mobility Aid

Dokumente, die wir vom Produzenten des Geräts Invacare 65400 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Invacare
- Bedienungsanleitungen 65400
- Produktkarten Invacare
- Informationsbroschüren
- oder Energieetiketten Invacare 65400
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Invacare 65400.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Invacare 65400, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Invacare 65400. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Invacare 65400 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Invacare 65400, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Invacare 65400 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Invacare 65400 verständlich ist.

Eine gänzliche Bedienungsanleitung von Invacare sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Invacare 65400 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Invacare 65400 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Invacare 65400, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Invacare 65400 - die uns die ersten Schritte während der Nutzung von Invacare 65400 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Invacare 65400 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Invacare 65400 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Invacare 65400?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Invacare 65400 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Invacare 65400 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)