Manual Invacare 65400

12 pages 0.25 mb
Download

Go to site of 12

Summary
  • Invacare 65400 - page 1

    SAFETY SUMMARY (CONTINUED) INSTALLATION WARNINGS SPRINT (65400) and SPARTAN (65420) MODELS - The rollator height can ONLY be adjusted where the push handle is textured (FIGURE 4). After installation and BEFORE use, ensure that ALL attaching hardware is securely tightened. REPLACING SPRINT CANES AND BRAKES (FIGURE 1) 1 . Remove the EXISTING brake wi ...

  • Invacare 65400 - page 2

    2 B. Remove the phillips screw securing the EXIST- ING hand brake to the push handle. C. Pull the EXISTING hand brake off of the push handle. NOTE: Remove clamps/hardware located at the end of the NEW brake wire before performing the following steps. 4 . Perform one (1) of the following: INST ALLING CANE KIT - Install NEW push handle. A . T urn the ...

  • Invacare 65400 - page 3

    3 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Wire Clamp Spring ASSEMBLED DISASSEMBLED Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Wire Clamp Spring Brake Wire Hole REMOVING/INSTALLING BRAKE WIRE - STEPS 1 AND 6 Push Handle Tie Wrap Side Frame Brake Cable REMOVING ...

  • Invacare 65400 - page 4

    4 REPLACING SPARTAN CANES AND BRAKES Preparing Spartan for Brake Replacement (FIGURE 2) 1 . Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Re- move EXISTING hand brake. A . Remove the hex bolt, washer and locknut secur- ing the hand brake to the push handle. B. Remove the hand brake. INST ALLING BRAKE KIT (AFTER 3/8/00) - ...

  • Invacare 65400 - page 5

    5 Replacing Spartan Brakes (FIGURE 4) 1 . Remove the brake pad. Refer to REMOVING/IN- ST ALLING THE SP AR T AN BRAKE P AD S in this pro- cedure of the instruction sheet. 2 . Remove the plunger assembly . Perform the following: A . Pry the plunger assembly out of the rollator leg with a flat screwdriver . 3 . Remove the EXISTING brake wire stop. Per ...

  • Invacare 65400 - page 6

    6 DISASSEMBLING/ASSEMBLING THE PLUNGER ASSEMBLY - STEPS 4 AND 7 FIGURE 4 - REPLACING SPARTAN CANES AND BRAKES - REPLACING SPARTAN BRAKES Insert Plunger Spring Brake Wire Brake Wire Stop Slot Opening Brake Wire Stop Flat Screwdriver Plunger Insert Lip Slot Opening REMOVING/SECURING THE BRAKE WIRE STOP - STEPS 3 AND 8 Plunger Assembly Rear Frame Flat ...

  • Invacare 65400 - page 7

    7 B. Remove the hand brake. C. T urn the adjustment lever COUNTERCLOCK- WISE. D. Insert push handles into side frames with the hand grip facing the back of the rollator . 3. Perform one (1) of the following: INST ALLING BRAKE KIT (BEFORE 3/7/00) - Install NEW hand brake. A . Position the handbrake assembly under the push handle so the lock button i ...

  • Invacare 65400 - page 8

    8 FIGURE 6 - ADJUSTING CABLE BRAKE HANDLE Cable Brake Handle Locknut Screw Mechanism Cable ADJUSTING SPRINT AND SPARTAN PUSH HANDLES (FIGURE 6) NOTE: For the most comfortable position, make sure the adjustment is performed while wearing the most frequently worn shoes. NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind t ...

  • Invacare 65400 - page 9

    9 Cable Adjuster Unit Locknut Cable Adjuster Unit Brake Cable Brake Phillips Screw Brake Clamp FIGURE 8 - ADJUSTING CABLE ADJUSTER UNIT - WHEEL ASSEMBLY - SPRINT ONLY Adjusting Cable Adjuster Unit - Wheel Assembly - MODEL 65400 ONLY (FIGURE 8 ) NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels. N ...

  • Invacare 65400 - page 10

    10 REPLACING STINGRAY AND STARGAZER BRAKES (FIGURE 10) NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing beside the rollator . 1 . Remove the EXISTING brake wire. Perform the fol- lowing: A . Loosen the hex screw securing the EXISTING brake wire to the brake. B. Loosen the caster housing nut. C. Pull EXISTING brake cable up t ...

  • Invacare 65400 - page 11

    ADJUSTING STINGRAY AND STARGAZER HAND BRAKES (FIGURE 10) Adjusting Hand Brake NOTE: COUNTERCLOCKWISE/CLOCKWISE direc- tions are determined by standing behind the rollator (us- ers position). 1 . Loosen the hand brake adjustment nut by turning CLOCKWISE. 2 . Perform one (1) of the following: A. Loosen hand brake tension - turn hand brake nut COUNTER ...

  • Invacare 65400 - page 12

    Invacare Corporation ww w .in vacare.com U S A Canada One In vacare W ay 5970 Chedworth W a y In vacare ® and "Y es, y ou can" are trademarks of In vacare Elyria, Ohio USA Mississauga, Ontario Corporation. 44036-2125 L5R 3T9, Canada © 2001 Invacare Corporation 800-333-6900 905-890-8838 Form No. 98-146 Part No. 1076198 Rev C (1) 1/01 Rem ...

Manufacturer Invacare Category Mobility Aid

Documents that we receive from a manufacturer of a Invacare 65400 can be divided into several groups. They are, among others:
- Invacare technical drawings
- 65400 manuals
- Invacare product data sheets
- information booklets
- or energy labels Invacare 65400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Invacare 65400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Invacare 65400, service manual, brief instructions and user manuals Invacare 65400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Invacare 65400.

Similar manuals

A complete manual for the device Invacare 65400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Invacare 65400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Invacare 65400.

A complete Invacare manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Invacare 65400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Invacare 65400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Invacare 65400, that we can find in the current document
3. Tips how to use the basic functions of the device Invacare 65400 - which should help us in our first steps of using Invacare 65400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Invacare 65400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Invacare 65400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Invacare 65400?

Use the form below

If you did not solve your problem by using a manual Invacare 65400, ask a question using the form below. If a user had a similar problem with Invacare 65400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)