-
Central Pneumatic 94275 - page 1
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 1 INST ALLA TION AND OPERA TING INSTRUCTIONS Due to continuing improv ements, actual product ma y diff er slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Copyright © 2007 b y Harbor F ...
-
Central Pneumatic 94275 - page 2
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 2 PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembly , ope ra tin g, i ns pec ti on, ma in ten an ce and c leani ng pr oc ed ure s, parts lis t and asse mb ly diag ram. K eep y our in v oice with this manual. ...
-
Central Pneumatic 94275 - page 3
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 3 ELECTRICAL SAFETY 4. Grounded tools m ust be plugged into an outlet properl y installed and grounded in accor dance with all codes and ordinances. Never remo ve the grounding pr ong or modify the plug in any wa y . Do not use any adapter plugs. Check with a qualified electrici ...
-
Central Pneumatic 94275 - page 4
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 4 12. A void accidental starting. Be sure the P ower Switch is off bef ore plugging in. Plugging in power tools with the P o wer Switch on, invites accidents . 13. Remove adjusting ke ys or wrenches before turning the po wer tool on. A wrench or a ke y that is left attached to a ...
-
Central Pneumatic 94275 - page 5
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 5 SPECIFIC SAFETY R ULES This Dust Reclaimer Kit is designed f or use only with Model 94274. 1. Use the right product f or the job. 2. Do not attempt to f orce small tools and equipment to do the work of larger tools and equipment. There are cer tain applications f or which this ...
-
Central Pneumatic 94275 - page 6
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 6 11. Alwa ys unplug the Dust Reclaimer fr om its electrical outlet bef ore performing an y maintenance or changing accessories. 12. Do not use the Dust Reclaimer with an y openings blocked. K eep free of anything that ma y reduce air flow or hinder motor operation. 13. Do not u ...
-
Central Pneumatic 94275 - page 7
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 7 GR OUNDING W ARNING! GROUNDED T OOLS: T OOLS WITH THREE PRONG PLUGS T ools marked with “Grounding Required” ha v e a three wire cord and three prong 1. grounding plug. The plug must be connected to a proper ly grounded outlet. If the tool should electrically malfunction or ...
-
Central Pneumatic 94275 - page 8
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 8 EXTENSION CORDS DOUBLE INSULA TED TOOLS: T OOLS WITH TWO PR ONG PLUGS T ools marked “Double Insulated” do not require grounding. The y hav e a special 1. double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters L ...
-
Central Pneumatic 94275 - page 9
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 9 RECOMMENDED MINIMUM WIRE GA UGE FOR EXTENSION CORDS* (120 OR 240 V OL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 – 2.0 18 18 18 18 16 2.1 – 3.4 18 18 18 16 14 3.5 – 5.0 18 18 16 14 12 5.1 – 7.0 18 16 14 12 12 7 ...
-
Central Pneumatic 94275 - page 10
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 10 How T o Install The Dust Reclaimer T o A W all Open the right side doorof the blast cabinet. Remo ve the f our screws on the e x- 1. haust board. T ake out the e xhaust board (see Figure 1). Install the Hose Connector (48) using f our M5x12 bolts (47) as shown in Figure 2 2 ...
-
Central Pneumatic 94275 - page 11
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 11 Use the patter n in Figure 3 as a ref erence, or hold the assemb led Dust Reclaimer 4. against the wall where y ou intend to mount it, and mar k the drill hole positions through the mounting holes. Drill holes in the wall to e xcept the W all Anchors (33). Use a concrete dr il ...
-
Central Pneumatic 94275 - page 12
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 12 Attach the dust reclaimer to the wall using Flat W ashers (35), Spring W ashers 7. (36) and He x Nuts (46). See Figure 5 below . Figure 5 Figure 4 T ap the W all Anchors (33) into the wall using a hammer . The y will e xpand inside 6. the wall when y ou thread a nut onto them. ...
-
Central Pneumatic 94275 - page 13
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 13 Attach the blast cabinet to the Dust Reclaimer as sho wn in Figure 7, then fir mly 9. tighten up the Hose Clamps (15). Figure 7 48 After attaching the Dust Reclaimer to the wall, it should look lik e it does in Figure 8. 6 below . Figure 6 ...
-
Central Pneumatic 94275 - page 14
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 14 How T o Install The Dust Reclaimer T o A Blast Cabinet (SKU # 94274) Open the right side doorof the blast cabinet. Remo ve the f our screws on the e x- 1. haust board. T ake out the Exhaust Board (see to Figure 8). Install the Hose Connector (48) using f our Bolts (47) as s ...
-
Central Pneumatic 94275 - page 15
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 15 Assemble the tw o Suppor t Brac k ets (32) to the Dust Reclaimer Housing (22A) 4. using par ts 28, 29, 30, and 31. Do not tighten up the Nuts (31) completely at this point. See Figure 10 belo w . Place the Suppor t Brac k ets (32) on a flat surf ace. Adjust the position of th ...
-
Central Pneumatic 94275 - page 16
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 16 Some v ersions of SKU 94274 Blast Cabinet do not ha v e the eight pre-drilled 6. mounting holes drilled into the back of the Blast Cabinet (holes are needed to mount the Dust Reclaimer Kit). If y ou hav e one of those b last cabinets y ou will need to hav e the eight mounting ...
-
Central Pneumatic 94275 - page 17
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 17 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ower Cord Plug (12) of the Dust Reclaimer is unplugged from its electrical outlet before perf or ming any inspection, maintenance, or cleaning procedures . 2. Before eac h use: Inspect the gener al condition of ...
-
Central Pneumatic 94275 - page 18
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 18 TR OUBLESHOO TING Problem P ossible Solution Dust Reclaimer does not tur n on. Make sure the P ower Switch (25) on is in 1. its “ON” position. Make sure the P ower Cord Plug of the 2. Dust Reclaimer is properly connected to a working, 115 volt, g rounded, electr ical outle ...
-
Central Pneumatic 94275 - page 19
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 19 NO TE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailable individually as replacement par ts . ASSEMBL Y DIA GRAM ８ ２５ ２５ ２３ ２４ ８ １７ ２２ １５ ４８ ４７ １ ２ ３ ４ ５ ６ ７ ９ １０ １１ １２ ...
-
Central Pneumatic 94275 - page 20
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 20 P ARTS LIST T HE MANUF ACTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIB UT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND T O THE BUYER THA T HE OR SHE IS Q ...
-
Central Pneumatic 94275 - page 21
SKU 94275 For technical questions, please call 1-800-444-3353. P A GE 21 90 Day W arranty Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the ...
¿Tienes una pregunta acerca de Central Pneumatic 94275?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Central Pneumatic 94275, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Central Pneumatic 94275 probablemente compartirá una forma de solucionarlo.