Español dropdown-ico

Manual de instrucciones Meyer Sound HM-1S

18 de páginas 1.05 mb
Descargar

Pasar a la página of 18

Summary
  • Meyer Sound HM-1S - page 1

    Patents Pending Operating Instructions HM-1S Self-Powered S tudio Monitor Copyright © 1998 Meyer Sound Laboratories, Inc. All rights reserved Part # 05.059.004.01 Rev A2 ...

  • Meyer Sound HM-1S - page 2

    2 Introduction .......................................................... 3 Power Requirements ............................................ 3 Power Cable Requirements .................................. 5 Audio Input ........................................................... 5 The HM-1S Subwoofer ......................................... 5 Cooling ...

  • Meyer Sound HM-1S - page 3

    3 Introduction The Meyer HM-1S S tudio Monitor is a compact, full- range, self-powered reference monitor that employs a concentric tweeter mounting structure to achieve true point-source performance. Sophisticated phase-correc- tion circuitry provides superb imaging without the off-axis cancellation effect s, back-wave interference, and IM dis- tor ...

  • Meyer Sound HM-1S - page 4

    4 Power Supplies for Larger Systems If an installation includes more than 10 speakers, or requires several speakers to operate from a single 48 V line, a single, high-output power supply should be considered. The following sections provide current and voltage specifications for the HM-1S s power requirements. Current Ratings The wide dynamic ran ...

  • Meyer Sound HM-1S - page 5

    5 audio interruption. In the third, and preferable case, supplies that feature voltage foldback allow brief periods of current-limit without audio interruption; for this reason, we recommend using such supplies. The HM-1S does not require tight voltage regulation and operates down to 35 V although peak SPL values are reduced. This operating voltage ...

  • Meyer Sound HM-1S - page 6

    6 HM-1S Speaker Cable The following drawings and procedures are provided as an aid in the event that the speaker cable used to connect the HM-1S to the HM-1S Subwoofer needs to be repaired or extended. In cases where the original speaker cable has been modified, be sure to complete the Subwoofer Performance V erification section on page 10 of this ...

  • Meyer Sound HM-1S - page 7

    7 HM-1S to HM-1S Subwoofer Cable Connector Assembly Procedure Cable Boot Cord Connector Cable Clamp Housing Contact Pins Coupling Ring Step 1: Feed the end of the cable through the boot, cable clamp housing, and coupling ring in the order and position shown. Cable 3/8" Max. 7/32" Step 2: FOR STEREO CABLES: Strip cable as shown and begin s ...

  • Meyer Sound HM-1S - page 8

    8 Subwoofer Performance V erification There are two methods of verifying that the phase relationship between the HM-1S and its subwoofer. One method is free field, the other is a ground plane measurement in half space. Free Field: Place the HM-1S directly above and coplanar to the subwoofer as pictured below: Place a calibrated measurement micropho ...

  • Meyer Sound HM-1S - page 9

    9 This represents a typical response of the HM-1S in free-field environment, on axis at 1 meter. This measurement was performed in the large anechoic chamber at MSLI. Connect the subwoofer and measure the combined response of the system. HM-1S on axis at 1 meter , free field. ...

  • Meyer Sound HM-1S - page 10

    10 This represents a typical response of the HM-1S and subwoofer, in phase, in a free field environment on axis at 1 meter. This measurement was performed in the large anechoic chamber at MSLI. This response indicates a complementary phase relationship between the HM-1S and subwoofer. HM-1S with in-phase subwoofer on axis at 1 meter , free field. ...

  • Meyer Sound HM-1S - page 11

    11 If the subwoofer is out of phase, the combined response will have a significant loss of energy compared to the overall response at around 82 Hz as illustrated below: HM-1S with out-of-phase subwoofer on axis at 1 meter , free field. ...

  • Meyer Sound HM-1S - page 12

    12 This represents a typical response of the HM-1S and subwoofer out-of-phase phase, in a free field environment on- axis at 1 meter. This measurement was performed in the large anechoic chamber at MSLI. If your system response indicates a phase reversal please contact Meyer Sound Technical Support for assistance. Half Sp ace: To verify the system ...

  • Meyer Sound HM-1S - page 13

    13 This represents a typical ground-plane response of the HM-1S, on-axis at 1 meter. Keep in mind that any surface close to the test space can create reflections which will change the response of the speaker. Connect the subwoofer to the HM-1S and measure the combined response of the system. HM-1S on axis at 1 meter , ground plane. ...

  • Meyer Sound HM-1S - page 14

    14 HM-1S with in-phase Subwoofer on axis at 1 meter , ground plane. This represents a typical ground-plane response of the HM-1S and subwoofer, in phase, at 1 meter. This response indicates a complementary phase relationship between the HM-1S and subwoofer. ...

  • Meyer Sound HM-1S - page 15

    15 HM-1S with out-of-phase Subwoofer on axis at 1 meter , ground plane. If the subwoofer is out of phase the combined response will have a significant loss of energy compared to the overall response at around 82 Hz as illustrated below: This represents a typical ground plane response of the HM-1S and subwoofer out-of-phase, in a ground plane enviro ...

  • Meyer Sound HM-1S - page 16

    16 Cooling and Fan Installation The HM-1S depends on natural convection to cool the heatsinks that absorb heat from the amplifiers and radiate the heat into the surrounding air space. Natural convection requires free air in back of, and underneath the HM-1S to allow air to flow up over the heatsinks. The HM-1S reaches an equilibrium temperature in ...

  • Meyer Sound HM-1S - page 17

    17  T o reduce the risk of electric shock, disconnect the loud- speaker from the AC adapter before installing audio cable. Reconnect the adapter only after making all signal con- nections.  Connect the AC adapter to a two-pole, three wire grounding mains receptacle. The recept acle must be connected to a fuse or circuit breaker . Connection t ...

  • Meyer Sound HM-1S - page 18

    18 Meyer Sound Laboratories, Inc. 2832 San Pablo Avenue Berkeley, California 94702 Telephone: 510 - 486 - 1166 FAX: 510 - 486 - 8356 E-mail: techsupport@meyersound.com http://www.meyersound.com Dimensions All units in inches HM-1S weighs 11.0 lb (5.0 kg); HM-1S Subwoofer weighs 33 lb (15 kg) Rear Panel Connectors Meyer Sound Germany GmbH Carl Zeiss ...

Fabricante Meyer Sound Categoría Speaker System

Los documentos del dispositivo Meyer Sound HM-1S que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Meyer Sound
- manuales de instrucciones HM-1S
- hojas de producto Meyer Sound
- folletos informativos
- o etiquetas energéticas Meyer Sound HM-1S
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Meyer Sound HM-1S.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Meyer Sound HM-1S, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Meyer Sound HM-1S. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Meyer Sound HM-1S.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Meyer Sound HM-1S, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Meyer Sound HM-1S. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Meyer Sound HM-1S.

El manual de instrucciones completo de Meyer Sound debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Meyer Sound HM-1S - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Meyer Sound HM-1S, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Meyer Sound HM-1S que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Meyer Sound HM-1S - que deben facilitarnos los primeros pasos durante el uso de Meyer Sound HM-1S
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Meyer Sound HM-1S
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Meyer Sound HM-1S en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Meyer Sound HM-1S?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Meyer Sound HM-1S, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Meyer Sound HM-1S probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)