-
Philips DSR 1000 - page 1
...
-
Philips DSR 1000 - page 2
Dear customer , Congratulations on your choice of Philips DSR 1000 satellite receiver . This Philips satellite receiver will allow you to obtain digital satellite programmes and services. We wish you much viewing pleasure with your new Philips DSR 1000. Note: This product is intended for Germany , Austria and Italy . CONTENTS 1. SAFETY INSTRUCTION ...
-
Philips DSR 1000 - page 3
SAFETY INSTR UCTION Important remarks on operation The following section contains important remarks concerning the operation, location and connection of the receiver . Please read these instructions carefully before using the unit for the first time. Extended absence/use during adver se weather conditions Always switch off the unit during periods o ...
-
Philips DSR 1000 - page 4
GB 3 Impor tant remarks on location and assembl y Location All electronic equipment generates heat, which is however not dangerous. Delicate furniture surfaces and finishes may become slightly discoloured over time due to the permanent heat source. Likewise, the feet of the equipment may cause discolouring on treated surfaces. If need be, place the ...
-
Philips DSR 1000 - page 5
4 CONNECTIONS The following connections are located on the back of the unit: 1 - 230 V/50 Hz: Connect the power cable to the power socket. 2 - A UDIO TV L & R: Audio output, left and right-hand channel for connecting to a stereo unit. 3 - TV : Connect the TV connection socket to your television unit using the SCART cable supplied. 4 - VCR: VCR ...
-
Philips DSR 1000 - page 6
Y OUR REMO TE 5 GB F : Choose favourite channel list Menu: Change transparency of On-Screen-Display (OSD). I : Display Short and extended information (if broadcasted) about current and next pro- grammes. V : Change channels up by one unit. Menu: Choose previous parameter . c c : Mute: turn the sound off/on. RC : Detailed Remote Control func- tions ...
-
Philips DSR 1000 - page 7
OPERA TING Y OUR UNIT 3.1 LOCAL OPERA TION Open (and close) the flap on the front of the unit by pressing the marked area (on the right-hand side). Local operation is by means of the keys ST ANDBY , V and W for switching between channels upwards/downwards (CH -/+), as well as C and B for adjusting the volume (VOL -/+). T o switch between radio and ...
-
Philips DSR 1000 - page 8
3.2 REMO TE CONTR OL FUNCTIONS Switching on fr om standby mode is done using the red ke y or using the number keys 0 ... 9 . The unit software contains a functional description for the remote control. T o consult this, simply press the RC key on the remote control and then the keys for which you require assistance - the appropriate help instruction ...
-
Philips DSR 1000 - page 9
A favourite list is a list in which channels selected from a channel pool can be organised. By default the names of the favourite lists are pre-defined similar to the following example. However , the name of the favourite list can be changed according to individual preferences. Each favourite list has the available channel numbers P000....P999. Fav ...
-
Philips DSR 1000 - page 10
9 GB 3.6 SELECTING THE CHANNEL LANGU A GE Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the W and V keys. The language originally set remains selected when you quit the menu using the E key . The selected language is stored w ...
-
Philips DSR 1000 - page 11
Deleting timer programming: 1...8 Select the timer row to be deleted using the number keys 1 ... 8 or the W or V key OK and delete the programmed data using the OK key . N.B.: If you accidentally delete a ro w and wish to reconstitute the or iginal information, e xit the timer menu b y pressing the E ke y twice. N.B.: The time and date are programm ...
-
Philips DSR 1000 - page 12
MENU STR UCTURE 4.1 CHANNELS 4.1.1 Fa vourite list Call up the main menu using the M key and then press the OK key twice. Sorting, swapping, copying and deleting channels - in one single men u! i Select one of the favourite lists 0...9. M Select the relevant satellite (e.g. Astra, Eutelsat or other). TV Select the channel source (e.g. NEW or ALL ch ...
-
Philips DSR 1000 - page 13
Switching to the left menu window is done using the W and V keys; switching to the right menu window is done using the C and B keys. The highlighting of the windows heading and channel will show which window is active. For each action (copying, swapping or deleting) you thus see the appropriate TV channel in the current window . The search function ...
-
Philips DSR 1000 - page 14
4.1.3 Channel pool (f or adv anced users) The channel pool contains all channels in alphabetical order . Selection depending on satellite is done using the M key; free or encrypted channels are chosen by pressing the TV key . All free (or all encrypted) channels on the selected satellite are contained in the «All Free» section, also the new free ...
-
Philips DSR 1000 - page 15
4.1.4 P arental control The five-digit security code (PIN) is set to 0 0 0 0 0 in the factory by default. a) Changing the security code (PIN) Select the «Parental control» menu using key 4 from the Main menu «Channels». Then select the {PIN} input field using key 2 or the W key and activate it by pressing the OK key . Enter the ‘ old ’ and ...
-
Philips DSR 1000 - page 16
4.2 SEARCH MODE 4.2.1 Satellite searc h mode Satellite search mode is performed for all frequencies on the selected satellite. Select the desired settings in the menu sequence. Selecting the individual parameters is performed after activating using the OK key and then using the B or C key . We recommend launching the search mode occasionally in ord ...
-
Philips DSR 1000 - page 17
16 4.3 SA TELLITES The ASTRA 19.2° and Eutelsat 13° (Hotbird) satellites are activated as per the default factory settings. Six other satellites are pre-programmed, but not activated. If you expand your reception equipment, you can make the required settings and activations for the pre-programmed satellites in the ‘Satellite’ menu. Activate t ...
-
Philips DSR 1000 - page 18
4.4.2 Menu language (1) Select language . The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {T urkish}. (2) Select character set . Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that chara ...
-
Philips DSR 1000 - page 19
4.4.4 LNB settings (1) LNB {ON} standard setting {OFF} operation without LNB signal (e.g. only with special cabling systems) (2) In standby mode {OFF} standard setting N.B.: For certain units only use the {OFF} setting, as otherwise the receiver continues to supply po wer to the LNB also in standby mode. The power consumption of the receiver can th ...
-
Philips DSR 1000 - page 20
4.4.6 Download Over Air (software update via satellite) Y ou can update the operating software and the channel lists (each individually) for your receiver via the ASTRA satellite (update via Download Over Air) using the Download sub-menu. The data for various units are transferred consecutively on a special receiving channel (thus the term data car ...
-
Philips DSR 1000 - page 21
GLOSSAR Y Band Frequency band of a satellite. Low band and high band. CA Conditional Access: denotes encrypted channels. CVBS Composite Video Burst Sync: video standard for TV or VCR equipment. DiSEqC Digital Satellite Equipment Control DV B Digital Video Broadcast EPG Electronic Programme Guide Fa vourite list List of selected channels from the ch ...
-
Philips DSR 1000 - page 22
TECHNICAL D A T A Channels • 2000 storage positions for TV channels and for 2000 radio channels. • 10 individually definable favourite lists each containing 1000 channel positions (e.g. for channel types SPORT , NEWS, MUSIC etc.). • 8 satellites (individually activatable). • 24 characters for channel and/or station names. • Channel select ...
-
Philips DSR 1000 - page 23
RF range • Sat-IF frequency range 950 - 2150 MHz • Input level ranges 43 - 83 dBµV • Reception threshold (EB/NO) < 4.5 dB TV system digital • Modulation, FEC, demultiplexer DVB-S standard • Video resolution CCIR 601 (720 x 576) • Input data rate 2 - 45 Msymbol/s • Bit rate 1.5 - 15 MBit/s • Video voltage/impedance 1 V/75 Ohm • ...
-
Philips DSR 1000 - page 24
TR OUBLESHOO TING When you have problems with your Philips DSR 1000, first check following points. 23 GB PROBLEM No picture, no sound and no front panel display . No picture, no sound ; but the front panel shows the time or “--”. No picture, no sound ; but the indication on the front of the receiver is correct. Only the main menu and the corres ...
-
Philips DSR 1000 - page 25
...
-
Philips DSR 1000 - page 26
DFU DSR 1000 - 31 1 1 176 51003 03 / 03 ...
¿Tienes una pregunta acerca de Philips DSR 1000?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips DSR 1000, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips DSR 1000 probablemente compartirá una forma de solucionarlo.