Manuale per l’uso Cambex PC2000

17 pagine 0.14 mb
Scarica

Vai alla pagina of 17

Summary
  • Cambex PC2000 - page 1

    FibreQuik Fibre Channel Host Bus Adapter For AIX User Guide Cambex Corporation 115 Flanders Road. Westborough, MA 01581 Customer support support@cambex.com Document: 081-468-042 Date: 01/06/04 Rev.: C ...

  • Cambex PC2000 - page 2

    ...

  • Cambex PC2000 - page 3

    FibreQuik - Fibre Channel Adapter User Gui de Table of Contents Table of Contents ......................................................................................... 1 Description ................................................................................................... 2 Specifications ............................................... ...

  • Cambex PC2000 - page 4

    FibreQuik - Fibre Channel Adapter User Gui de Description The Cambex FibreQuik ™ Fibre Channel host bus adapters provide attachment of Fibre Channel devices to PCI or Micro Channel based servers. They support the SCSI-FCP protocol. When used with the Cambex Alternate Channel Failover software, two adapters in a system provide greater throughput a ...

  • Cambex PC2000 - page 5

    FibreQuik - Fibre Channel Adapter User Gui de AIX Driver Installation Command line driver installation The name and revision level of a driver may be exam ined by issuing the command (as root): installp -ld <device> where <device> is replaced by /dev/fd0 for the floppy drive, /mnt/AIX/PC1000.image for a CD-ROM mounted at /mnt or the nam ...

  • Cambex PC2000 - page 6

    FibreQuik - Fibre Channel Adapter User Gui de where <device> is as described above. example: installp -acd /dev/cd0 all After installing the driver, see the README file for additional information more /usr/lpp/cbxfc/READ_ME SMIT Driver Installation The smit path is Software Installation and Maintenance Install and Update Software Install and ...

  • Cambex PC2000 - page 7

    FibreQuik - Fibre Channel Adapter User Gui de AIX Configuration During power-up initialization, AIX will find and configure the new adapter(s) and any supported devices using the driver's configuration method. Devices are assigned a SCSI ID as they are discovered starting with 0. SCSI ID is not related to loop ID or to SCSI ID assignment on ot ...

  • Cambex PC2000 - page 8

    FibreQuik - Fibre Channel Adapter User Gui de Persistent Bindings Persistent Bindings is the term used to indicate the mapping of SCSI ID to FC Worldwide Name (W WN). By keeping a persistent binding, the loop ID or port ID of a device may change and the device will still be properly addressed. In the Cambex AIX driver, persistent binding is automat ...

  • Cambex PC2000 - page 9

    FibreQuik - Fibre Channel Adapter User Gui de Login after LIP (yes) Full duplex in loop mode (no) Attributes used to limit data rate or resources used Execution throttle (256 simultaneous I/O) IOCB allocation (256) DMA window size (PCI only, 64MB) Max frame size (1024) or 512, 2048. Fibre channel rate in GHz for PC2000 (auto) SCSI device types to e ...

  • Cambex PC2000 - page 10

    FibreQuik - Fibre Channel Adapter User Gui de example, if errpt identifies a loose cable on device cda1, lsdev will give an address similar to: cda1 Available 00-02-01-3,0 Cambex SCSI ... Which indicates that the adapter is in location 00-02, and the drive is at SCSI ID 3, LUN 0. Checklist for driver and HBA installation The following commands m ay ...

  • Cambex PC2000 - page 11

    FibreQuik - Fibre Channel Adapter User Gui de lscfg -vl scsi4 should print more information for a card: DEVICE LOCATION DESCRIPTION scsi4 20-58 Cambex ... Manufacturer................CAMBEX Machine Type and Model......PC1000F ROS Level and ID............V2.01.19 Serial Number............... 579 Displayable Message.........Cambex ... Network Address ...

  • Cambex PC2000 - page 12

    FibreQuik - Fibre Channel Adapter User Gui de • Full_duplex enables higher performance in loop mode where all connected devices support it. P2P is inherently full duplex. • Fibre Channel topology is normally found automatically but may be forced to loop_only or P2P_only with this attribute. • Frame_size defaults to 1K • Infinity is the leng ...

  • Cambex PC2000 - page 13

    FibreQuik - Fibre Channel Adapter User Gui de Topology: NL AL_PA: 0xef Adapter_ID: 0 or for fabric: Topology: F Port_name: 0x00011000 Adapter_ID: 255 Make sure that the id value doesn't conflict with any other host or device on the same fibre channel loop. The other attributes will be different on each card. During boot, the number displayed w ...

  • Cambex PC2000 - page 14

    FibreQuik - Fibre Channel Adapter User Gui de Appendix A Map of SCSI ID to arbitrated loop physical address (ALPA). ID ALPA ID ALPA ID ALPA ID ALPA 0 EF 1 E8 2 E4 3 E2 4 E1 5 E0 6 DC 7 DA 8 D9 9 D6 10 D5 11 D4 12 D3 13 D2 14 D1 15 CE 16 CD 17 CC 18 CB 19 CA 20 C9 21 C7 22 C6 23 C5 24 C3 25 BC 26 BA 27 B9 28 B6 29 B5 30 B4 31 B3 32 B2 33 B1 34 AE 35 ...

  • Cambex PC2000 - page 15

    FibreQuik - Fibre Channel Adapter User Gui de PC2000 LED Meanings Top LED – Transceiver hardware is detecting a signal. Middle LED – Firmware is being synchronized. Bottom LED – Flashing amber when not synchronized. LED NORM BAD CABLE NO CONN TOP GREEN GREEN OFF MIDDLE GREEN OFF OFF BOTTOM OFF FLASHING FLASHING - 13 - ...

  • Cambex PC2000 - page 16

    FibreQuik - Fibre Channel Adapter User Gui de Declaration of conformity We Cambex Corporation of Waltham , Massachusetts, USA, declare under our sole responsibility, that the pr oducts PC-1000, PC-1000F, MC-1000 and MC-1000F are in conformi ty with the followi ng standards: EN 55022:1994/A1:1995/A2:1997 C lass A ITE emissions requi rements EN 50082 ...

  • Cambex PC2000 - page 17

    FibreQuik - Fibre Channel Adapter User Gui de Safety Notices Safety Notice Class 1 Laser Product Versions of this product supplied wi th an optical transceiver m eet the safety requirements of a cl ass 1 laser as specified by the US Food and Drug Administ ration Center of Drug and Radi ological Health (CDR H) 21 CFR 1040.10 & 1040.11 and by IEC ...

Fabbricante Cambex Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoCambex PC2000 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Cambex
- manuali per l’uso PC2000
- schede prodotto Cambex
- opuscoli
- o etichette energetiche Cambex PC2000
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Cambex PC2000.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Cambex PC2000, manuali di manutenzione, brevi manuali o manuali utente Cambex PC2000. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Cambex PC2000.

Manuale completo del dispositivo Cambex PC2000, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Cambex PC2000 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Cambex PC2000.

Il manuale per l’uso completo Cambex, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Cambex PC2000 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Cambex PC2000, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Cambex PC2000 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Cambex PC2000 - che ci dovrebbe aiutare nei primi passi durante l'uso Cambex PC2000
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Cambex PC2000
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Cambex PC2000 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Cambex PC2000?

Utilizza il modulo sottostante

Se non hai risolto il problema con Cambex PC2000 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Cambex PC2000 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)