English dropdown-ico

Manual Cambex PC2000

17 pages 0.14 mb
Download

Go to site of 17

Summary
  • Cambex PC2000 - page 1

    FibreQuik Fibre Channel Host Bus Adapter For AIX User Guide Cambex Corporation 115 Flanders Road. Westborough, MA 01581 Customer support support@cambex.com Document: 081-468-042 Date: 01/06/04 Rev.: C ...

  • Cambex PC2000 - page 2

    ...

  • Cambex PC2000 - page 3

    FibreQuik - Fibre Channel Adapter User Gui de Table of Contents Table of Contents ......................................................................................... 1 Description ................................................................................................... 2 Specifications ............................................... ...

  • Cambex PC2000 - page 4

    FibreQuik - Fibre Channel Adapter User Gui de Description The Cambex FibreQuik ™ Fibre Channel host bus adapters provide attachment of Fibre Channel devices to PCI or Micro Channel based servers. They support the SCSI-FCP protocol. When used with the Cambex Alternate Channel Failover software, two adapters in a system provide greater throughput a ...

  • Cambex PC2000 - page 5

    FibreQuik - Fibre Channel Adapter User Gui de AIX Driver Installation Command line driver installation The name and revision level of a driver may be exam ined by issuing the command (as root): installp -ld <device> where <device> is replaced by /dev/fd0 for the floppy drive, /mnt/AIX/PC1000.image for a CD-ROM mounted at /mnt or the nam ...

  • Cambex PC2000 - page 6

    FibreQuik - Fibre Channel Adapter User Gui de where <device> is as described above. example: installp -acd /dev/cd0 all After installing the driver, see the README file for additional information more /usr/lpp/cbxfc/READ_ME SMIT Driver Installation The smit path is Software Installation and Maintenance Install and Update Software Install and ...

  • Cambex PC2000 - page 7

    FibreQuik - Fibre Channel Adapter User Gui de AIX Configuration During power-up initialization, AIX will find and configure the new adapter(s) and any supported devices using the driver's configuration method. Devices are assigned a SCSI ID as they are discovered starting with 0. SCSI ID is not related to loop ID or to SCSI ID assignment on ot ...

  • Cambex PC2000 - page 8

    FibreQuik - Fibre Channel Adapter User Gui de Persistent Bindings Persistent Bindings is the term used to indicate the mapping of SCSI ID to FC Worldwide Name (W WN). By keeping a persistent binding, the loop ID or port ID of a device may change and the device will still be properly addressed. In the Cambex AIX driver, persistent binding is automat ...

  • Cambex PC2000 - page 9

    FibreQuik - Fibre Channel Adapter User Gui de Login after LIP (yes) Full duplex in loop mode (no) Attributes used to limit data rate or resources used Execution throttle (256 simultaneous I/O) IOCB allocation (256) DMA window size (PCI only, 64MB) Max frame size (1024) or 512, 2048. Fibre channel rate in GHz for PC2000 (auto) SCSI device types to e ...

  • Cambex PC2000 - page 10

    FibreQuik - Fibre Channel Adapter User Gui de example, if errpt identifies a loose cable on device cda1, lsdev will give an address similar to: cda1 Available 00-02-01-3,0 Cambex SCSI ... Which indicates that the adapter is in location 00-02, and the drive is at SCSI ID 3, LUN 0. Checklist for driver and HBA installation The following commands m ay ...

  • Cambex PC2000 - page 11

    FibreQuik - Fibre Channel Adapter User Gui de lscfg -vl scsi4 should print more information for a card: DEVICE LOCATION DESCRIPTION scsi4 20-58 Cambex ... Manufacturer................CAMBEX Machine Type and Model......PC1000F ROS Level and ID............V2.01.19 Serial Number............... 579 Displayable Message.........Cambex ... Network Address ...

  • Cambex PC2000 - page 12

    FibreQuik - Fibre Channel Adapter User Gui de • Full_duplex enables higher performance in loop mode where all connected devices support it. P2P is inherently full duplex. • Fibre Channel topology is normally found automatically but may be forced to loop_only or P2P_only with this attribute. • Frame_size defaults to 1K • Infinity is the leng ...

  • Cambex PC2000 - page 13

    FibreQuik - Fibre Channel Adapter User Gui de Topology: NL AL_PA: 0xef Adapter_ID: 0 or for fabric: Topology: F Port_name: 0x00011000 Adapter_ID: 255 Make sure that the id value doesn't conflict with any other host or device on the same fibre channel loop. The other attributes will be different on each card. During boot, the number displayed w ...

  • Cambex PC2000 - page 14

    FibreQuik - Fibre Channel Adapter User Gui de Appendix A Map of SCSI ID to arbitrated loop physical address (ALPA). ID ALPA ID ALPA ID ALPA ID ALPA 0 EF 1 E8 2 E4 3 E2 4 E1 5 E0 6 DC 7 DA 8 D9 9 D6 10 D5 11 D4 12 D3 13 D2 14 D1 15 CE 16 CD 17 CC 18 CB 19 CA 20 C9 21 C7 22 C6 23 C5 24 C3 25 BC 26 BA 27 B9 28 B6 29 B5 30 B4 31 B3 32 B2 33 B1 34 AE 35 ...

  • Cambex PC2000 - page 15

    FibreQuik - Fibre Channel Adapter User Gui de PC2000 LED Meanings Top LED – Transceiver hardware is detecting a signal. Middle LED – Firmware is being synchronized. Bottom LED – Flashing amber when not synchronized. LED NORM BAD CABLE NO CONN TOP GREEN GREEN OFF MIDDLE GREEN OFF OFF BOTTOM OFF FLASHING FLASHING - 13 - ...

  • Cambex PC2000 - page 16

    FibreQuik - Fibre Channel Adapter User Gui de Declaration of conformity We Cambex Corporation of Waltham , Massachusetts, USA, declare under our sole responsibility, that the pr oducts PC-1000, PC-1000F, MC-1000 and MC-1000F are in conformi ty with the followi ng standards: EN 55022:1994/A1:1995/A2:1997 C lass A ITE emissions requi rements EN 50082 ...

  • Cambex PC2000 - page 17

    FibreQuik - Fibre Channel Adapter User Gui de Safety Notices Safety Notice Class 1 Laser Product Versions of this product supplied wi th an optical transceiver m eet the safety requirements of a cl ass 1 laser as specified by the US Food and Drug Administ ration Center of Drug and Radi ological Health (CDR H) 21 CFR 1040.10 & 1040.11 and by IEC ...

Manufacturer Cambex Category Network Card

Documents that we receive from a manufacturer of a Cambex PC2000 can be divided into several groups. They are, among others:
- Cambex technical drawings
- PC2000 manuals
- Cambex product data sheets
- information booklets
- or energy labels Cambex PC2000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cambex PC2000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cambex PC2000, service manual, brief instructions and user manuals Cambex PC2000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cambex PC2000.

Similar manuals

A complete manual for the device Cambex PC2000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cambex PC2000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cambex PC2000.

A complete Cambex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cambex PC2000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cambex PC2000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cambex PC2000, that we can find in the current document
3. Tips how to use the basic functions of the device Cambex PC2000 - which should help us in our first steps of using Cambex PC2000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cambex PC2000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cambex PC2000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cambex PC2000?

Use the form below

If you did not solve your problem by using a manual Cambex PC2000, ask a question using the form below. If a user had a similar problem with Cambex PC2000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)