Simplicity 1692149の取扱説明書

22ページ 3.84 mb
ダウンロード

ページに移動 of 22

Summary
  • Simplicity 1692149 - page 1

    Print V endor Instructions Ho w to use this file Operator’ s Manuals P aper Size: • 11x17 • Body - 50 lbs brilliant white offset or equivalent • Cov er - on pre-printed two tone “Sw ash” stock. Press: • Body - 1 color , 2-sided • Cov er - 1 color , 1 sided Bindery: • Saddle stitch, face trim *if too thic k f or saddle stitch, tape ...

  • Simplicity 1692149 - page 2

    THIS P A GE INTENTIONALL Y BLANK (FOR PLA CEMENT ONL Y - DO NO T PRINT) ...

  • Simplicity 1692149 - page 3

    OPERA T OR’S MANU AL Clean Sweep T win Catcher s Mfg. No. Description 1692149 Clean Sweep Twin Catcher (for 30” Mower Decks) 1692150 Clean Sweep Twin Catcher (for 34” Mower Decks) 1709142-08 Rev 04/2004 TP 100-2181-08-AT-UV Clean Sweep T win Catcher ...

  • Simplicity 1692149 - page 4

    MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2004 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA. ...

  • Simplicity 1692149 - page 5

    1 T able of Contents Normal Installation & Remov al Installation & Remov al .....................................5 T roubleshooting Char t ................................................................7 Initial Setup & Assembl y 30” Models - Blade and Adapter Assembly .....8 34” Models - Baffle, Blade , & Adapter Assy . ..10 F ...

  • Simplicity 1692149 - page 6

    2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian- gle in text signifies important cautions or warnings which must be followed. SAFETY DECALS This u ...

  • Simplicity 1692149 - page 7

    3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged. For efficient bagging, air circulation under the mower deck, through the chute and into the bag ...

  • Simplicity 1692149 - page 8

    4 Operation & Storage BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris, which may be caught or thrown by the mower blades. Clean the tube with mild detergent (other products may damage tube). Inspection windows can be removed to be cleaned. Make sure windows are securely in place before operating. Check grass condit ...

  • Simplicity 1692149 - page 9

    5 Normal Installation & Removal INST ALLA TION & REMO V AL NOTE: For first-time installation, refer to Initial Setup & Installation. NOTE: If mower deck is equipped with Mulching Kit, the mulching baffles must be removed for grass collection. Make sure the high-lift blades (34') or high-lift tabs (30') are installed per the As ...

  • Simplicity 1692149 - page 10

    6 Normal Installation & Removal 3. Open grass bag cover and install grass bag frames (A, figure 3) to support brackets (B). 4. On 30" mower, lift the deflector (C) up and install the adapter (A, figure 4) to mower deck by hooking bracket over the rear carriage bolt and securing with jam nut (D) and positioning front slot on the adapter und ...

  • Simplicity 1692149 - page 11

    7 T roubleshooting The following table provides troubleshooting instructions for the more common and easily corrected problems. For problems not covered in the table, see your dealer. W ARNING To avoid serious Injury, perform maintenance on the grass catcher only after stopping the engine and waiting for all moving parts to come to a complete stop. ...

  • Simplicity 1692149 - page 12

    8 Initial Setup & Assembly 30” MODELS - BLADE AND AD APTER ASSEMBL Y Blade Assembl y - 30” Mower 1. Remove the mower deck to access the blade or using an overhead hoist, elevate the front of the unit to access the mower blade. 2. Mount the lifts (B, Figure 6) to the discharge side of the blade as shown. Torque nuts to 14 ft. lbs. Adapter &a ...

  • Simplicity 1692149 - page 13

    9 Initial Setup - 30” Models 3. Install 5/16-18 x 2-1/4 carriage bolt (A, figure 8) through front hole in mower deck along with cup (B), whiz flange nut (C), wing nut (D) and center lock nut (E). Nut (C) must be seated inside cup and center lock nut (E) should be flush with end of carriage bolt. Figure 8. A. Carriage Bolt, 5/16-18 x 2-1/4 B. Cup ...

  • Simplicity 1692149 - page 14

    10 Initial Setup - 34” Models 34" MODELS - B AFFLE, BLADE, & AD APTER ASSEMBL Y Install Baffle 1. Remove mower deck from rider. Position mower deck upright and support in this position. 2. Position baffle with notched end towards discharge side opening, Install all hardware as shown in figure 10. The notch must be positioned to clear the ...

  • Simplicity 1692149 - page 15

    11 Initial Setup - 34” Models Install Blades - Early Models with Splined Arbor 1. Remove existing discharge-side blade but retain hardware. Remove the retaining band (E, figure 11 b) from the arbor shaft and remove the existing splined adapter (3-3/8" O.D. F, figure 11b). This adapter can be discarded. The new 2" O.D. splined adapter su ...

  • Simplicity 1692149 - page 16

    12 Initial Setup - All Models FRAME & B A GGER SUPPORT ASSEMBL Y - ALL MODELS Note: Units with 0510 transmissions use anchors (A, fig- ure 13) with a notch, all other units use anchor with no notch. See Inset Figure 13. 1. Assemble the two anchors (A, figure 13) to the trans- mission housing using the 5/16-18 x 3 capscrews (B), washers (C) and ...

  • Simplicity 1692149 - page 17

    13 Initial Setup - All Models GRASS CA TCHER ASSEMBL Y - ALL MODELS NOTE: Cover and bag support are packaged as an assembly with long clevis pins and clips. It may be easier to separate components for the following step. 1. Install horizontal bag support (A, figure 14) to upright catcher support (B) holes as shown. Note that the open set of holes ( ...

  • Simplicity 1692149 - page 18

    14 Initial Setup - All Models 5. Open cover and fasten cable (A, figure 17) to tube support (B) to prevent cover from going over center when opened. Loop end of cable fits over washer (C). Figure 17. A. Cable B. Support C. Washer Figure 18. A. Grass Bag Frame B. Support Frame 6. Open grass bag cover and install grass bag frames (A, figure 18) to su ...

  • Simplicity 1692149 - page 19

    15 Initial Setup - All Models 7. Apply dry talc powder to rubber seal at cover open- ing. Install tube (A, figure 19) as far as possible into opening to clear adapter and install over adapter. Figure 19. A. Tube B. Wire Form Location Figure 20. A. Wire Form B. Round Cup 8. Secure tube by moving wire form (A, figure 20) down over round cup (B) on ad ...

  • Simplicity 1692149 - page 20

    Installation Instructions Baffle Kit Part No. 1686783 INST ALLA TION 1. Remove the hardware (D) securing the plastic elbow (C) to the metal support plate (B). 2. Insert the baffle (A) in between the support plate (B) and elbow (C). 3. Reinstall the hardware (D). For Coronet / 400 / 2400 Series Riders Figure 1. Installation Kit Contents: Part No. Qt ...

  • Simplicity 1692149 - page 21

    INSTALLATION INSTRUCTIONS EXHAUST SHIELD KIT MFG. NO. 1666610 1. Raise the seat deck to expose the right-hand top duct. 2. See figure 1. Cut out the template below and place it on the duct with the edges aligned. Tape the template in place and drill out the holes as indicat- ed using a 13/W drill bit. Figure 1. Placing Template for drilling holes 3 ...

  • Simplicity 1692149 - page 22

    18 T orque Specification Chart FOR ST ANDARD MACHINE HARDWARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8 ...

メーカー Simplicity カテゴリー Lawn Mower

Simplicity 1692149のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 1692149の取扱説明書
- Simplicityの製品カード
- パンフレット
- またはSimplicity 1692149の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Simplicity 1692149の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Simplicity 1692149の取り付け説明書、サービスマニュアル、簡易説明書、またはSimplicity 1692149のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Simplicity 1692149の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Simplicity 1692149デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSimplicity 1692149を使用するのを助ける技術的文書のことです。説明書は通常、全てのSimplicity 1692149ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Simplicityの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Simplicity 1692149の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSimplicity 1692149の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Simplicity 1692149に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Simplicity 1692149デバイスの基本機能を使うにあたってのヒント。 Simplicity 1692149のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Simplicity 1692149に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSimplicity 1692149のメーカー/サービスへの連絡先に関する情報。

Simplicity 1692149についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSimplicity 1692149の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSimplicity 1692149で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)