Perle Systems C-100-XXXXXの取扱説明書

19ページ 0.11 mb
ダウンロード

ページに移動 of 19

Summary
  • Perle Systems C-100-XXXXX - page 1

    P/N 5500306-15 Perle Fast Ethernet Media Con verter Modul e Installation Guide C-100-XX XXX Unm anaged Module CM-100-XX XXX Managed Mo dule ...

  • Perle Systems C-100-XXXXX - page 2

    Fast Ethernet Media Converter – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operation of the Perle Fast Ethernet Media Convert er Module(s) (C-100 and CM-10 0) that are us ed in conju nction with a P erle MCR Ch assis. The C-100 are unmanage d m edia converter m odules, and t he CM-10 ...

  • Perle Systems C-100-XXXXX - page 3

    Fast Ethernet Media Converter – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jumpers for setting conf iguration. The default DI P switch sett ings (al l switches in the UP posit ion) and jum per settings will work f or most installatio ns.. The f ollowing steps are used to co nfigure the Perle F ...

  • Perle Systems C-100-XXXXX - page 4

    Fast Ethernet Media Converter – Installation Guide 4 Auto-Config Jumper (CM-100 only ) The Auto-Co nfig jum per (J6) is located j ust belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. This jum per only applies to CM-100 m odules. Strapping p ins 1 and 2 of the jum per will set the m odule in SW mode and str app ...

  • Perle Systems C-100-XXXXX - page 5

    Fast Ethernet Media Converter – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switc h Position Mode Up (defau lt) Auto Down Off Auto : In this mode of operation the Me dia Conv erter Module will negotiate Ethernet param eters on th e copper conn ection. T his will ensure the m ost optim al connection param et ...

  • Perle Systems C-100-XXXXX - page 6

    Fast Ethernet Media Converter – Installation Guide 6 Link M ode (Switch 2) Switch Position Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the link state on one connec tion is directly reflecte d throug h the Media Co nverter Mo dule to the ot her connection. If link is lost on one of the connectio ...

  • Perle Systems C-100-XXXXX - page 7

    Fast Ethernet Media Converter – Installation Guide 7 If the Media C onverter has been set to Link Pas s-Thr ough mode, the effec t will be the sam e as FEF, since the link loss on the fiber r eceiver will bring do wn the copp er link, which will in turn c ause the tra nsm it fiber link to be brought d own. Note: If it is required to either gen er ...

  • Perle Systems C-100-XXXXX - page 8

    Fast Ethernet Media Converter – Installation Guide 8 Unused (Sw itch 4) Pause (Sw itch 5) Switch Position Mode Up (defau lt) Enabled Down Disabled Enabled: W hen Auto Neg otiation has been set to Auto (SW 1), the Media Con verter Modul e will use this s etting for its Ethernet param eter negotiation o n the copper connection. Disable: The Media C ...

  • Perle Systems C-100-XXXXX - page 9

    Fast Ethernet Media Converter – Installation Guide 9 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions w hen installing the Media Con verter Module(s) into t he Chassis. Failure to obs erve this caution co uld result in d amage to the Module(s ) and/or chassis. The Perle Me dia Conv erter Mod ...

  • Perle Systems C-100-XXXXX - page 10

    Fast Ethernet Media Converter – Installation Guide 10 7. Rem ove the dust cap f rom the fiber c onnector and connec t the fiber and c opper cabl es. Removing Media Convert Modules 1. Loosen the c aptive reta iner screw on th e front of the Media Converter M odule and ge ntly pull the m odule ou t. 2. If not insert ing a replacem ent Media Co nver ...

  • Perle Systems C-100-XXXXX - page 11

    Fast Ethernet Media Converter – Installation Guide 11 Installing the Simplex Fiber Cable • Locate a 1 00Base-X compliant sim plex (1 stran d) fiber cable with appropr iate connector s. • Connect the fiber cab le from one Media Converter Module to another Medi a Converter/s witch/f iber device. Installing the Copper Cable • Locate 100 Base-T ...

  • Perle Systems C-100-XXXXX - page 12

    Fast Ethernet Media Converter – Installation Guide 12 Operation Status LED The Perle F ast Ethernet M edia Conv erter m odules have three single color s tatus LEDs located on th e face plate of the m odule. PWR - Pow er/Test • On : Power is on, m odule operating norm ally. • Blinking slo wly : the m odule is in loop back m ode. • Blinking q ...

  • Perle Systems C-100-XXXXX - page 13

    Fast Ethernet Media Converter – Installation Guide 13 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium -dependant inter face) detects the signalling on the 100B ASE-T interface to deter mine the t ype of cable connect ed (straight- through or c rossover) a nd automatical ly configures t he conn ection. Error Recov ery: In certain conf igu ...

  • Perle Systems C-100-XXXXX - page 14

    Fast Ethernet Media Converter – Installation Guide 14 Troubleshooting General • Ensure the m odule is corr ectly seated to the bac kplane in the MCR Chass is. The PW R LED should be on solid. • Ensure both devices on either end of the fiber are compatible. If using a sim plex fiber c onnection, e nsure that you have bot h an Upstrea m (U) and ...

  • Perle Systems C-100-XXXXX - page 15

    Fast Ethernet Media Converter – Installation Guide 15 Method 2: The f iber connection ca n also be verified b y configuring the rem ote Media Converter for loopback mode. T he LKF LEDs o n both Media C onverters should be lit. Data sho uld pass through the local con verter, over the fiber conn ection to th e rem ote Media Con verter. At the re m ...

  • Perle Systems C-100-XXXXX - page 16

    Fast Ethernet Media Converter – Installation Guide 16 Technical Specifications Power Inpu t/Consump tion 12V DC / 2.0 W Operating T emperatur e: 0 ° C to 50 ° C (32 ° F to 122 ° F) Storage Tem perature : - 25 ° C to 70 ° C (-13 ° F to 158° F) Operating Hu midity : 5% to 90% (non-condensing) Storage Hum idity : 5% to 95% (non-condensing) O ...

  • Perle Systems C-100-XXXXX - page 17

    Fast Ethernet Media Converter – Installation Guide 17 C-100-S2SC120 CM-100-S2SC120 SM T X: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 C-100-S2ST120 CM-100-S2ST120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: 0 35 C-100-S2LC120 CM-100-S2LC120 S M T X: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 C-100-S1SC20U CM-100-S1SC20U SM TX: 1310 ...

  • Perle Systems C-100-XXXXX - page 18

    Fast Ethernet Media Converter – Installation Guide 18 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital devi ce, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equip ment is operated in a commercial enviro ...

  • Perle Systems C-100-XXXXX - page 19

    Fast Ethernet Media Converter – Installation Guide 19 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with return to f actory repairs f or Perle pro ducts that f ail under the conditions of the warrant y coverage. Det ails can b e found at : http://www.pe rle.com/support_services/warrant y .shtml Contacting Te ...

メーカー Perle Systems カテゴリー Network Card

Perle Systems C-100-XXXXXのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- C-100-XXXXXの取扱説明書
- Perle Systemsの製品カード
- パンフレット
- またはPerle Systems C-100-XXXXXの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Perle Systems C-100-XXXXXの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Perle Systems C-100-XXXXXの取り付け説明書、サービスマニュアル、簡易説明書、またはPerle Systems C-100-XXXXXのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Perle Systems C-100-XXXXXの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Perle Systems C-100-XXXXXデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPerle Systems C-100-XXXXXを使用するのを助ける技術的文書のことです。説明書は通常、全てのPerle Systems C-100-XXXXXユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Perle Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Perle Systems C-100-XXXXXの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPerle Systems C-100-XXXXXの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Perle Systems C-100-XXXXXに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Perle Systems C-100-XXXXXデバイスの基本機能を使うにあたってのヒント。 Perle Systems C-100-XXXXXのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Perle Systems C-100-XXXXXに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPerle Systems C-100-XXXXXのメーカー/サービスへの連絡先に関する情報。

Perle Systems C-100-XXXXXについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPerle Systems C-100-XXXXXの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPerle Systems C-100-XXXXXで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)