English dropdown-ico

Manual Perle Systems C-100-XXXXX

19 pages 0.11 mb
Download

Go to site of 19

Summary
  • Perle Systems C-100-XXXXX - page 1

    P/N 5500306-15 Perle Fast Ethernet Media Con verter Modul e Installation Guide C-100-XX XXX Unm anaged Module CM-100-XX XXX Managed Mo dule ...

  • Perle Systems C-100-XXXXX - page 2

    Fast Ethernet Media Converter – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operation of the Perle Fast Ethernet Media Convert er Module(s) (C-100 and CM-10 0) that are us ed in conju nction with a P erle MCR Ch assis. The C-100 are unmanage d m edia converter m odules, and t he CM-10 ...

  • Perle Systems C-100-XXXXX - page 3

    Fast Ethernet Media Converter – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jumpers for setting conf iguration. The default DI P switch sett ings (al l switches in the UP posit ion) and jum per settings will work f or most installatio ns.. The f ollowing steps are used to co nfigure the Perle F ...

  • Perle Systems C-100-XXXXX - page 4

    Fast Ethernet Media Converter – Installation Guide 4 Auto-Config Jumper (CM-100 only ) The Auto-Co nfig jum per (J6) is located j ust belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. This jum per only applies to CM-100 m odules. Strapping p ins 1 and 2 of the jum per will set the m odule in SW mode and str app ...

  • Perle Systems C-100-XXXXX - page 5

    Fast Ethernet Media Converter – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switc h Position Mode Up (defau lt) Auto Down Off Auto : In this mode of operation the Me dia Conv erter Module will negotiate Ethernet param eters on th e copper conn ection. T his will ensure the m ost optim al connection param et ...

  • Perle Systems C-100-XXXXX - page 6

    Fast Ethernet Media Converter – Installation Guide 6 Link M ode (Switch 2) Switch Position Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the link state on one connec tion is directly reflecte d throug h the Media Co nverter Mo dule to the ot her connection. If link is lost on one of the connectio ...

  • Perle Systems C-100-XXXXX - page 7

    Fast Ethernet Media Converter – Installation Guide 7 If the Media C onverter has been set to Link Pas s-Thr ough mode, the effec t will be the sam e as FEF, since the link loss on the fiber r eceiver will bring do wn the copp er link, which will in turn c ause the tra nsm it fiber link to be brought d own. Note: If it is required to either gen er ...

  • Perle Systems C-100-XXXXX - page 8

    Fast Ethernet Media Converter – Installation Guide 8 Unused (Sw itch 4) Pause (Sw itch 5) Switch Position Mode Up (defau lt) Enabled Down Disabled Enabled: W hen Auto Neg otiation has been set to Auto (SW 1), the Media Con verter Modul e will use this s etting for its Ethernet param eter negotiation o n the copper connection. Disable: The Media C ...

  • Perle Systems C-100-XXXXX - page 9

    Fast Ethernet Media Converter – Installation Guide 9 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions w hen installing the Media Con verter Module(s) into t he Chassis. Failure to obs erve this caution co uld result in d amage to the Module(s ) and/or chassis. The Perle Me dia Conv erter Mod ...

  • Perle Systems C-100-XXXXX - page 10

    Fast Ethernet Media Converter – Installation Guide 10 7. Rem ove the dust cap f rom the fiber c onnector and connec t the fiber and c opper cabl es. Removing Media Convert Modules 1. Loosen the c aptive reta iner screw on th e front of the Media Converter M odule and ge ntly pull the m odule ou t. 2. If not insert ing a replacem ent Media Co nver ...

  • Perle Systems C-100-XXXXX - page 11

    Fast Ethernet Media Converter – Installation Guide 11 Installing the Simplex Fiber Cable • Locate a 1 00Base-X compliant sim plex (1 stran d) fiber cable with appropr iate connector s. • Connect the fiber cab le from one Media Converter Module to another Medi a Converter/s witch/f iber device. Installing the Copper Cable • Locate 100 Base-T ...

  • Perle Systems C-100-XXXXX - page 12

    Fast Ethernet Media Converter – Installation Guide 12 Operation Status LED The Perle F ast Ethernet M edia Conv erter m odules have three single color s tatus LEDs located on th e face plate of the m odule. PWR - Pow er/Test • On : Power is on, m odule operating norm ally. • Blinking slo wly : the m odule is in loop back m ode. • Blinking q ...

  • Perle Systems C-100-XXXXX - page 13

    Fast Ethernet Media Converter – Installation Guide 13 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium -dependant inter face) detects the signalling on the 100B ASE-T interface to deter mine the t ype of cable connect ed (straight- through or c rossover) a nd automatical ly configures t he conn ection. Error Recov ery: In certain conf igu ...

  • Perle Systems C-100-XXXXX - page 14

    Fast Ethernet Media Converter – Installation Guide 14 Troubleshooting General • Ensure the m odule is corr ectly seated to the bac kplane in the MCR Chass is. The PW R LED should be on solid. • Ensure both devices on either end of the fiber are compatible. If using a sim plex fiber c onnection, e nsure that you have bot h an Upstrea m (U) and ...

  • Perle Systems C-100-XXXXX - page 15

    Fast Ethernet Media Converter – Installation Guide 15 Method 2: The f iber connection ca n also be verified b y configuring the rem ote Media Converter for loopback mode. T he LKF LEDs o n both Media C onverters should be lit. Data sho uld pass through the local con verter, over the fiber conn ection to th e rem ote Media Con verter. At the re m ...

  • Perle Systems C-100-XXXXX - page 16

    Fast Ethernet Media Converter – Installation Guide 16 Technical Specifications Power Inpu t/Consump tion 12V DC / 2.0 W Operating T emperatur e: 0 ° C to 50 ° C (32 ° F to 122 ° F) Storage Tem perature : - 25 ° C to 70 ° C (-13 ° F to 158° F) Operating Hu midity : 5% to 90% (non-condensing) Storage Hum idity : 5% to 95% (non-condensing) O ...

  • Perle Systems C-100-XXXXX - page 17

    Fast Ethernet Media Converter – Installation Guide 17 C-100-S2SC120 CM-100-S2SC120 SM T X: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 C-100-S2ST120 CM-100-S2ST120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: 0 35 C-100-S2LC120 CM-100-S2LC120 S M T X: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 C-100-S1SC20U CM-100-S1SC20U SM TX: 1310 ...

  • Perle Systems C-100-XXXXX - page 18

    Fast Ethernet Media Converter – Installation Guide 18 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital devi ce, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equip ment is operated in a commercial enviro ...

  • Perle Systems C-100-XXXXX - page 19

    Fast Ethernet Media Converter – Installation Guide 19 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with return to f actory repairs f or Perle pro ducts that f ail under the conditions of the warrant y coverage. Det ails can b e found at : http://www.pe rle.com/support_services/warrant y .shtml Contacting Te ...

Manufacturer Perle Systems Category Network Card

Documents that we receive from a manufacturer of a Perle Systems C-100-XXXXX can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- C-100-XXXXX manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems C-100-XXXXX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems C-100-XXXXX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems C-100-XXXXX, service manual, brief instructions and user manuals Perle Systems C-100-XXXXX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems C-100-XXXXX.

Similar manuals

A complete manual for the device Perle Systems C-100-XXXXX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems C-100-XXXXX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems C-100-XXXXX.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems C-100-XXXXX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems C-100-XXXXX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems C-100-XXXXX, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems C-100-XXXXX - which should help us in our first steps of using Perle Systems C-100-XXXXX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems C-100-XXXXX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems C-100-XXXXX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems C-100-XXXXX?

Use the form below

If you did not solve your problem by using a manual Perle Systems C-100-XXXXX, ask a question using the form below. If a user had a similar problem with Perle Systems C-100-XXXXX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)