Graco 312781Eの取扱説明書

22ページ 1.21 mb
ダウンロード

ページに移動 of 22

Summary
  • Graco 312781E - page 1

    312781E EN Instr uctions-P ar ts Fluid Mix Manif old For proportional mixing of plural component coatings. For prof essional use only . See page 2 f or model inf ormation, including maximu m working pressure. Important Safety Instructions Read all warnings and inst r uctions in this manual. F or complete w arnings and instr uctions see y our propor ...

  • Graco 312781E - page 2

    Related Manua ls 2 312781E Contents Related M anuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Maint ...

  • Graco 312781E - page 3

    Installation 312781E 3 Installation Air Connections See F IG . 1, F IG . 2, or F IG . 3. 1. Connect 5/32 in. (4 mm) OD air tube s from the valv e solenoids to the air inlets of each valv e . 2. ProMix 2KS and ProMix 3KS systems only: Conn ect an air supply line to air pu rge v alve (APV) inlet (1/4 in. ID tube is supplied, with tag). 3. Pressurize ...

  • Graco 312781E - page 4

    Installation 4 312781E F IG . 1. ProM ix 2KS and Pr oMix 3KS W all Mount Fluid Stations MA MB DV B MS SPV DV A APV TI12556a SM FI SV A SVB RV B RV A Ke y: Pr oMix 2KS Fluid Station MA Component A Meter (not included in mix manifold) D V A Component A Dose V alv e R V A Component A Sampling Va l v e SV A Component A Shutoff Va l v e MB Component B M ...

  • Graco 312781E - page 5

    Installation 312781E 5 F IG . 2. ProM ix 2KE Fluid Controls, Seque ntial Dosing F IG . 3. ProM ix 2KE Fluid Contr ols, Dynamic Dosing ti15699a Key: MA Component A Meter D V A1 Component A Dose V alv e D V A2 Second Color/Catalyst V alve D V A3 Third Color/Catalyst V alv e SV A Solvent V alve A CV A Meter A Check V alve MB Component B Meter D VB Com ...

  • Graco 312781E - page 6

    Installation 6 312781E Setup the Fluid Manif old f or Dynamic Dosing If you will be operating using dynamic dosing, the fluid manifold must be setup properly f or your application. Order the 15U955 Injection Kit (accessor y) . NO TE: F or ProMix 3KS, order two 15U955 Injection Kits. See y our propor tioner manu als f or setup instructions , and to ...

  • Graco 312781E - page 7

    Operation 312781E 7 Operation Purging F ollow t he purging procedure in t he propor tioner system manua l. NO TES: • Pu rge before using equipmen t, which was tested with lightweight oil that could contamin ate you r mater ial. • Purge bef ore changing colors , bef ore f luid can dry in the equipm ent, at the end of the day , before stor ing, a ...

  • Graco 312781E - page 8

    Maintenance 8 312781E Mix Manif old V alve Settings T o open dispense or purge v alve s, turn hex n ut (E) counterclockwise . T o close, turn clockwise . F IG . 4. Maintenance Daily • Purge the mixing system at the end of pr oduction. • Check and refill fluid su pplies for all components and solv ent. • Inspect the manif old and fl uid line c ...

  • Graco 312781E - page 9

    Troubleshooting 312781E 9 T r oub leshooting Isolate a Mixing Pr oblem A mixing prob lem can be caused b y a prob lem with the controller , meters , and solenoid valv es , as well as the mix manif old. 1. T o isolate the problem, check fo r any visible f aults or errors: a. Are all air and fluid tub es, ho ses, a nd electrical cables pr operly conn ...

  • Graco 312781E - page 10

    Repair 10 312781E Repair NO TE: Purge the mix manif old wit h solven t after repair to remov e any e xcess g rease that is u sed f or lubricating par ts. Remo ve the Integrator Mixer See the Pa r t s drawings on page s 14-19. Clean and inspect all par ts. Apply pipe sealant to all pipe threa ds when reassembling. Items 31, 39, and 40 are included i ...

  • Graco 312781E - page 11

    Repair 312781E 11 Repair the V alves and Seats (Pr oMix 2KS and ProMix 3KS only) V alve Seat Kit 24A86 1 is av ailab le. See page 15. P ar ts included in the ki t are marked with a symbol, f or e xam- ple (16‡). F or best result s, use a ll par ts included in th e kit. See the Pa r t s drawings on pages 14 and 16. Clea n and inspect all par ts. A ...

  • Graco 312781E - page 12

    Repair 12 312781E Reb uild the Mix Manifold Manif old Rebuild Kit 15U931 is a vailab le. See page 15. P arts included in the kit are marked with a symbol, for e xample (3 *). F or best results, use all par ts included in the kit. See the Pa r t s drawings on page s 14-19. Clean and inspect all par ts. Apply pipe sealant to all pipe threa ds when re ...

  • Graco 312781E - page 13

    Repair 312781E 13 ...

  • Graco 312781E - page 14

    Parts 14 312781E Pa r t s P art No. 289695, for Pr oMix 2KS Pr oportioner TI11578a 31 41 1 23 15‡* 14* 13* 16‡ 21 11 48 42 43 22 3 49 19 17 18* 5* 12 20 24 25 28 29 30 32 33 35 36 37 38 39* 40* 44 45* 15‡* 15‡* 15‡* 16‡ 17 20 19 31* 39* 18* 31* 46 47 Apply pipe sealant to all pi pe threads when reassembling. 1 52 53 Detail of Calibrati ...

  • Graco 312781E - page 15

    Parts 312781E 15 P art No. 289695, for Pr oMix 2KS Pr oportioner * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). ‡ P ar ts included in V alve Seat Kit 24A861 ( purchase separate ly). (Optional Carbide Se at Kit 15U932 is av ailab le separately .) --- These par ts are not av ailab le separately . Integrator Kits (include ...

  • Graco 312781E - page 16

    Parts 16 312781E P art No. 256875, for Pr oMix 3KS Pr oportioner TI14363a Apply pipe sealant to all pi pe threads when reassembling. 1 31 41 1 23 15‡* 14* 13* 16‡ 21 8 48 22 3 49 19 17 18* 5* 12 20 24 25 28 29 30 32 53 35 36 37 38 39* *40 9 45* 15‡* 15‡* 16‡ 17 20 19 31* 39* 18* 31* 46 47 5* 45* 10 52 Detail of Calibration Ki t (53), show ...

  • Graco 312781E - page 17

    Parts 312781E 17 P art No. 256875, for Pr oMix 3KS Pr oportioner * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). ‡ P ar ts included in V alve Seat Kit 24A861 ( purchase separate ly). (Optional Carbide Se at Kit 15U932 is av ailab le separately .) --- These par ts are not av ailab le separately . Integrator Kits (include ...

  • Graco 312781E - page 18

    Parts 18 312781E P art No. 262398, for Pr oMix 2KE Pr oportioner , Sequential Dosing * P ar ts included in Manif old Reb uild Kit 15U931 (pur- chase separately). Integrator Kits 1 3 5* 21 23 24 25 28 29 30 31* 35 36 37 39* 40* 31* 45 46 47 48 49 ti16301a *31 39* 38 Ref. P art Description Qty . 1 --- -- BOD Y , inte grator manif old 1 3 15T59 2 PLUG ...

  • Graco 312781E - page 19

    Parts 312781E 19 P art No. 262399, for Pr oMix 2KE Pr oportioner , Dynamic Dosing * P arts included in Manifold Rebuild Kit 15 U931 (pur- chase separately). Restrict or Kit ti16327a 1 3 31* 35 40* 55 45 *5 31* 54 36 23 37 39* 38 *39 24 28 29 30 59 57 58 56 25 Ref. P art Description Qty . 1 --- -- BOD Y , inte grat or manif old 1 3 15T59 2 PLUG, int ...

  • Graco 312781E - page 20

    Parts 20 312781E ...

  • Graco 312781E - page 21

    Technical Data 312781E 21 Te c h n i c a l D a t a Maximum Fluid Working Pres sure . . . . . . . . . . . . . . . . . . 289 695, 256875, and 262398: 4000 psi (28 MP a, 280 bar) 262399: 4500 psi (31 MP a, 310 bar) Dispense V alv e Fluid Inlet Size . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) Dispense V alv e Air Inlet Fitting Size . . . . . . . ...

  • Graco 312781E - page 22

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. Original instructions. Thi s manual contains Eng lish. MM 312781 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Kor ...

メーカー Graco カテゴリー Work Light

Graco 312781Eのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 312781Eの取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 312781Eの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 312781Eの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 312781Eの取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 312781Eのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 312781Eの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 312781Eデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 312781Eを使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 312781Eユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 312781Eの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 312781Eの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 312781Eに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 312781Eデバイスの基本機能を使うにあたってのヒント。 Graco 312781Eのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 312781Eに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 312781Eのメーカー/サービスへの連絡先に関する情報。

Graco 312781Eについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 312781Eの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 312781Eで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)