Manual Perle Systems S-100MM-XXXXX

13 pages 0.11 mb
Download

Go to site of 13

Summary
  • Perle Systems S-100MM-XXXXX - page 1

    P/N 5500312-10 Perle Fast Fiber to Fiber Media Converters Installation Guide S-100MM-XXXXX ...

  • Perle Systems S-100MM-XXXXX - page 2

    Fast Fiber to Fiber Media Converter – Installation Guide 2 Overview This docum ent contains instr uctions necessar y for the installation and operation of the Perle Fast Fiber t o Fiber Standa lone Media Converters (S-10 0MM). These prod ucts allow dissim ilar 100Base- X fiber interfaces to connect to o ne another. These are the fib er to fiber c ...

  • Perle Systems S-100MM-XXXXX - page 3

    Fast Fiber to Fiber Media Converter – Installation Guide 3 Inst allation The default s witch settings (all s witches in the UP p osition) will work for m ost installations. These are the st eps required to co nfigure the Perle Fa st Fiber to Fiber media convert er: 1. Set the DIP switch s ettings (optiona l). 2. Install and connect t he fiber cab ...

  • Perle Systems S-100MM-XXXXX - page 4

    Fast Fiber to Fiber Media Converter – Installation Guide 4 DIP S w itch Setti ngs Link Mode (Sw itch 1) Switch Position Mode Up (default) Link Pass-T hrough Mode Down Standard Mode Link Pass-T hrough : In this m ode, the link state on one f iber connection is direct ly reflected throug h the media con verter to the other fiber connect ion. For ex ...

  • Perle Systems S-100MM-XXXXX - page 5

    Fast Fiber to Fiber Media Converter – Installation Guide 5 Note: T his switch needs to be set t o either generate or detect the FEF signal. Illustration of the FEF feature Media Converter A Configuration Link Mode–Standard Mode Far-End Fault–Enabled Media Converter B Configuration Link Mode–Link Pass Through Mode Far-End Fault–Enabled Seq ...

  • Perle Systems S-100MM-XXXXX - page 6

    Fast Fiber to Fiber Media Converter – Installation Guide 6 Remote Loop back Fiber 1 (Switch 3) Switch Position Mode Up (default) Disabled Down Enabled Disabled: The loopback f eature is disabled. This is t he norm al position for regular operation. T he switch must be set t o this position in order f or data to pass throug h the media co nverter. ...

  • Perle Systems S-100MM-XXXXX - page 7

    Fast Fiber to Fiber Media Converter – Installation Guide 7 Installing the Du plex Fibe r Cable Locate a 100Bas e-X com pliant duplex (2 strands) fiber cable with appropriate conn ectors. Connect the f iber cables from one media converter to the other media converter/s witch/fiber device ensuring th at the RX and T X are reversed at the opposite e ...

  • Perle Systems S-100MM-XXXXX - page 8

    Fast Fiber to Fiber Media Converter – Installation Guide 8 Operation Status LED The Perle Fast Fib er to Fiber Media co nverters have three single colored status L EDs located on the f ront panel of the unit. PWR - Po w er/Test • On : Power is on an d in norm al operation. • Blinking slowly : t he unit is in loopback mode. • Blinking quickl ...

  • Perle Systems S-100MM-XXXXX - page 9

    Fast Fiber to Fiber Media Converter – Installation Guide 9 T roubleshootin g General • Ensure po wer is supplied t o the media converter – use of the supplied power ad apters is highl y recommended. • Ensure both devices on e ither end of the fib er are com patible. If using a sim plex fiber connec tion, ensure that you have both an Upstrea ...

  • Perle Systems S-100MM-XXXXX - page 10

    Fast Fiber to Fiber Media Converter – Installation Guide 10 T echnical Specifications The following app lies to all S-100MM m edia converters : Power Input/Co nsumption 12V DC /3.5 W Operating T emperature: 0° C to 50° C (32° F to 1 22° F) Storage Temper ature: -25° C to 70° C (-13° F to 158° F) Operating Humidit y: 5% to 90% non-cond ens ...

  • Perle Systems S-100MM-XXXXX - page 11

    Fast Fiber to Fiber Media Converter – Installation Guide 11 Model Mode Wavelength (nm) TX Power (dB) RX Power (dB) Budget (dB) S-100MM-S2L C4 0 SM TX: 1310 RX :1310 Min: -5 Max: 0 Min: -34 Max: -3 29 S-100MM-S2SC 80 SM TX: 1550 RX: 1550 Min: -5 Max: 0 Min: -34 Max: -3 29 S-100MM-S2ST 8 0 SM TX: 1550 RX: 1550 Min: -5 Max: 5 Min: -34 Max: -3 29 S-1 ...

  • Perle Systems S-100MM-XXXXX - page 12

    Fast Fiber to Fiber Media Converter – Installation Guide 12 Compliance Info rmation FCC This product has been found to comply w ith the limits for a Cla s s A digital devi ce, pursuant to Part 15 o f the FCC rules. These li mits are designed to provid e reasonable protec tion against har mful interference whe n the equipment is oper ated in a com ...

  • Perle Systems S-100MM-XXXXX - page 13

    Fast Fiber to Fiber Media Converter – Installation Guide 13 Warranty / Registration Perle’s standard Lifetime Warr anty provides custom ers with return to factor y repairs for Perle products that fail under th e conditions of the warrant y coverage. Details can be found at: http://www .perle.com/support_serv ices/warrant y.shtml Contacting Tec ...

Manufacturer Perle Systems Category TV Converter Box

Documents that we receive from a manufacturer of a Perle Systems S-100MM-XXXXX can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- S-100MM-XXXXX manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems S-100MM-XXXXX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems S-100MM-XXXXX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems S-100MM-XXXXX, service manual, brief instructions and user manuals Perle Systems S-100MM-XXXXX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems S-100MM-XXXXX.

A complete manual for the device Perle Systems S-100MM-XXXXX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems S-100MM-XXXXX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems S-100MM-XXXXX.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems S-100MM-XXXXX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems S-100MM-XXXXX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems S-100MM-XXXXX, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems S-100MM-XXXXX - which should help us in our first steps of using Perle Systems S-100MM-XXXXX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems S-100MM-XXXXX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems S-100MM-XXXXX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems S-100MM-XXXXX?

Use the form below

If you did not solve your problem by using a manual Perle Systems S-100MM-XXXXX, ask a question using the form below. If a user had a similar problem with Perle Systems S-100MM-XXXXX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)