Manual Trane 4TWB3

8 pages 1.3 mb
Download

Go to site of 8

Summary
  • Trane 4TWB3 - page 1

    ALL phases of this installation must comply with NA TIONAL, ST A TE AND LOCAL CODES IMPORT ANT — This Document is customer property and is to remain with this unit. Please return to service information pack upon completion of work. Installer’s Guide The Weathertron ® Heat Pump has been designed and manufactured t o withstand and operate in sev ...

  • Trane 4TWB3 - page 2

    © 2006 American Standard Inc. All Rights Reserved 18-BC61D1-1 Installer’ s Guide the sides of the unit and should be of sufficient distance from the unit to prevent restriction of airflow to and from the unit. Also allow for proper maintenance space. The barrier should be constructed of materials which will blend in with the building design. 3. ...

  • Trane 4TWB3 - page 3

    18-BC61D1-1 3 Installer’ s Guide pressure tap service port (when depressed) opens only to the field brazing side of the valve when the valve is in the seated position. The liquid line valve is not a back seating valve (see W ARNING below). WARNING ! Extreme caution should be exercised when opening the Liquid and Gas Line Service Valves. Turn valv ...

  • Trane 4TWB3 - page 4

    4 18-BC61D1-1 Installer’ s Guide 10. The gas valve can now be opened. For a ball type gas valve, open the gas valve by removing the shut-off valve cap and turning the valve stem 1/4 turn counterclock- wise, using 1/4" Open End or Adjustable wrench. See Figure 4. For brass gas line service valve opening, follow 8 and 9 on page 3. See Figure 5 ...

  • Trane 4TWB3 - page 5

    18-BC61D1-1 5 Installer’ s Guide I. ELECTRIC HEA TERS Electric heaters, if used, are to be installed in the air han- dling device according to the instructions accompanying the air handler and the heaters. J. ST ART CONTROL Some models have quick start components which are factory installed. For models that do not have factory installed start com ...

  • Trane 4TWB3 - page 6

    6 18-BC61D1-1 Installer’ s Guide SUBCOOLING CHARGING IN COOLING ABOVE 55°F OD AMBIENT SUBCOOLING CHARGING BELOW 55°F OD AMBIENT – IN HEA TING ONLY The Trane company has always recommended installing Trane approved matched indoor and outdoor systems. All Trane split systems are ARI rated with only TXV indoor systems. The benefits of installing ...

  • Trane 4TWB3 - page 7

    18-BC61D1-1 7 Installer’ s Guide 4TWB3 OUT LINE DRA WING NOTE: ALL DIMENSIONS ARE IN MM (INCHES). From Dwg. 21D153074 Rev. 12 MODELS BASE FIG. A B C D E F G H J K 4TWB3018A 3 2 730 (28-3/4) 829 (32-5/8) 756 (29-3/4) 1/2 1/4 127 (5) 76 (3) 197 (7-3/4) 57 (2-1/4) 508 (20) 4TWB3024A 3 2 730 (28-3/4) 829 (32-5/8) 756 (29-3/4) 5/8 5/16 127 (5) 76 (3) ...

  • Trane 4TWB3 - page 8

    18-BC61D1-1 Trane A business of American Standard Companies www.trane.com Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice. Installer’ s Guide CHECKOUT PROCEDURE After installation has been completed, it is recommended that the entire system be check ...

Manufacturer Trane Category Heat Pump

Documents that we receive from a manufacturer of a Trane 4TWB3 can be divided into several groups. They are, among others:
- Trane technical drawings
- 4TWB3 manuals
- Trane product data sheets
- information booklets
- or energy labels Trane 4TWB3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Trane 4TWB3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Trane 4TWB3, service manual, brief instructions and user manuals Trane 4TWB3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Trane 4TWB3.

Similar manuals

A complete manual for the device Trane 4TWB3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Trane 4TWB3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Trane 4TWB3.

A complete Trane manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Trane 4TWB3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Trane 4TWB3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Trane 4TWB3, that we can find in the current document
3. Tips how to use the basic functions of the device Trane 4TWB3 - which should help us in our first steps of using Trane 4TWB3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Trane 4TWB3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Trane 4TWB3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Trane 4TWB3?

Use the form below

If you did not solve your problem by using a manual Trane 4TWB3, ask a question using the form below. If a user had a similar problem with Trane 4TWB3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)