English dropdown-ico

Manual Advent CAM330

12 pages 0.98 mb
Download

Go to site of 12

Summary
  • Advent CAM330 - page 1

    Model: CAM330 Wired License Plate / Rear Mounted Camera Inst allation Manual Features • Very Small Compact Camera • High Resolution, ¼ inch CMOS Color Camera • Waterproof Housing • 160 Degree Wide View Angle • Selectable Image: Normal/Reverse • Multiple Camera Mounts including Behind License Plate – Does Not Obstruct Plate • Adjust ...

  • Advent CAM330 - page 2

    2 T able of Content s Warnings ...................................................................................... 3 Product Description ..................................................................... 4 Packing List ................................................................................. 4 Camera Installation ..................... ...

  • Advent CAM330 - page 3

    3 W arnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. Do not use any features of this system to the e ...

  • Advent CAM330 - page 4

    4 Product Description This revolutionary camera design integr ates a backup camera with your vehicle’s rear license plate without c overing the license plate. The camera is easy to mount on your car, truck, or van with the br acket being hidden by your license plate. We have also included a surface mount bracket to help with other installation me ...

  • Advent CAM330 - page 5

    5 Camera Inst allation License Plate Mounting Instructions 1. Remove the rear license plate. 2. Examine the vehicle to determine the best way to run the power wires to the reverse lights and the extension cable through the car. 3. The Camera can be mounted above or below the plate. (For surface mounting with the included bracket, see the next secti ...

  • Advent CAM330 - page 6

    6 that is not covered by the warranty. If drilling a hole, perform th e following steps: a) Acquire a 5/8 inch drill bit, rust preventive, all of whic h can be purchased at a hardware store. b) Check behind the intended drilli ng location before dril ling to verify that no wires or mechanisms can interfere with or be damaged during drilli ng. c) Ch ...

  • Advent CAM330 - page 7

    7 sure that the mounting screws will not hit any wires or equipment inside the vehicle. 2. Attach the surface mounting bracket to the vehicle with the hardware included. 3. Route the camera wiring into the vehicle. The wire can be run through an existing grommet, behind a tail lamp, under the tru nk molding, or if necessary, through a 5/8 inch hol ...

  • Advent CAM330 - page 8

    8 Obtaining Reverse Power 1. Locate the reverse lamp in the tail light assembly. 2. Using the tap connector supplied, perform the following steps: a) Place the un-stripped positive lead from the tail lamp in the run channel, which runs completely through the connector. b) Insert the un-stripped red power wire from the camera completely into the oth ...

  • Advent CAM330 - page 9

    9 Reverse/Normal Image Adjustment The camera comes standard with a reversed i mage, designed for mounting at the rear of the vehicle. If you need to change to a forward or normal image view, clip the blue jumper wi re loop on the wiring cable (labeled “Mirror Selection” below) to change the camera image to normal. Secure the clipped wires with ...

  • Advent CAM330 - page 10

    10 S pecifications 1. Voltage: DC12V 2. Current: 50 mA 3. Signal System: NTSC 4. Image Sensor: ¼” CMOS Sensor 5. Horizontal Resolution: 480 lines 6. Viewing Angle: 160 degrees 7. Minimum Illum ination: 0.7 Lux 8. Image Display: Selectable Nor mal/Reverse Image 9. Adjustable Viewing Angle 10. Dime nsions: • Camera: 18mm W • License Plate Brac ...

  • Advent CAM330 - page 11

    7 ...

  • Advent CAM330 - page 12

    8 © 2008 Audiovox Electr onics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 ...

Manufacturer Advent Category Automobile Electronics

Documents that we receive from a manufacturer of a Advent CAM330 can be divided into several groups. They are, among others:
- Advent technical drawings
- CAM330 manuals
- Advent product data sheets
- information booklets
- or energy labels Advent CAM330
All of them are important, but the most important information from the point of view of use of the device are in the user manual Advent CAM330.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Advent CAM330, service manual, brief instructions and user manuals Advent CAM330. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Advent CAM330.

Similar manuals

A complete manual for the device Advent CAM330, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Advent CAM330 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Advent CAM330.

A complete Advent manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Advent CAM330 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Advent CAM330, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Advent CAM330, that we can find in the current document
3. Tips how to use the basic functions of the device Advent CAM330 - which should help us in our first steps of using Advent CAM330
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Advent CAM330
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Advent CAM330 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Advent CAM330?

Use the form below

If you did not solve your problem by using a manual Advent CAM330, ask a question using the form below. If a user had a similar problem with Advent CAM330 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)