Manual Advent CAM325

11 pages 0.38 mb
Download

Go to site of 11

Summary
  • Advent CAM325 - page 1

    Model: CAM325 Wired Bumper or Butte rfly Mounted Camera Inst allation Manual Features • Very Small Compact Camera • High Resolution, ¼ inch CMOS Color Camera • Waterproof Housing • 160 Degree Wide View Angle • Selectable Image: Normal/Reverse • Multiple Camera Mounts including Flush bumper mount and adjustable butterfly mount. • DC12 ...

  • Advent CAM325 - page 2

    2 T able of Content s Warnings ...................................................................................... 3 Product Description ..................................................................... 4 Packing List ................................................................................. 4 Camera Installation ..................... ...

  • Advent CAM325 - page 3

    3 W arnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. Do not use any features of this system to the e ...

  • Advent CAM325 - page 4

    4 Product Description This new camera system gives you two mounting options for installing a backup camera onto the rear of your vehi cle (surface butterfly mount and in bumper flush m ount). This Wired Camera is compatible with m o st monitors/TFT screens and can be connected using a standard RCA connector. Packing List Parts Barcode # Quantity Ca ...

  • Advent CAM325 - page 5

    5 Camera Inst allation Butterfly Mounting Instructions 1. Assemble the camera – ensure that the top of the camera marked with an alignment arrow and the word “U P” is aligned with the notch in the metal bracket. 2. Decide on a suitable mounting position. 3. Examine the vehicle to determine the best way to run the power wires to the reverse li ...

  • Advent CAM325 - page 6

    6 d) Drill a 5/8 inch hole at the se lected location. e) Coat the edge of the hole with rust preventative. f) Route the camera cable through the grommet and then through the hole. g) Insert the grommet in the hole to keep water from entering the vehicle. Flush Mounted M ounting Instructions 1. Assembly the camera. Ensure that the spacer ring is ins ...

  • Advent CAM325 - page 7

    7 Wiring the Camera to the Vehicle’s Reverse Lamp 1. Locate the reverse lamp in the tail light assembly. 2. Using the tap connector supplied, perform the following steps: a) Place the un-stripped positive lead from the tail lamp in the run channel, which runs completely through the connector. b) Insert the un-stripped red power wire from the came ...

  • Advent CAM325 - page 8

    8 Reverse/Normal Image Adjustment The camera comes standard with a reversed i mage, designed for mounting at the rear of the vehicle. If you need to change to a forward or normal image view, clip the blue jumper wire loop on the wiring cable to change the camera image to normal. Secure the clipped wires with electrical tape. To change back to rever ...

  • Advent CAM325 - page 9

    9 S pecifications 1. Voltage: DC9v – DC24v 2. Current: 50 mA 3. Signal System: NTSC 4. Image Sensor: ¼” CMOS Sensor 5. Horizontal Resolution: 480 lines 6. Viewing Angle: 160 degrees 7. Minimum Illum ination: 0.7 Lux 8. Image Display: Selectable Nor mal/Reverse Image 9. Adjustable Viewing Angle 10. Dime nsions: • Camera: 26mm W x 30mm L • L ...

  • Advent CAM325 - page 10

    7 ...

  • Advent CAM325 - page 11

    8 © 2008 Audiovox Electr onics Corp., 150 Marcus Blvd. , Hauppauge, N.Y. 11788 ...

Manufacturer Advent Category Automobile Electronics

Documents that we receive from a manufacturer of a Advent CAM325 can be divided into several groups. They are, among others:
- Advent technical drawings
- CAM325 manuals
- Advent product data sheets
- information booklets
- or energy labels Advent CAM325
All of them are important, but the most important information from the point of view of use of the device are in the user manual Advent CAM325.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Advent CAM325, service manual, brief instructions and user manuals Advent CAM325. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Advent CAM325.

Similar manuals

A complete manual for the device Advent CAM325, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Advent CAM325 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Advent CAM325.

A complete Advent manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Advent CAM325 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Advent CAM325, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Advent CAM325, that we can find in the current document
3. Tips how to use the basic functions of the device Advent CAM325 - which should help us in our first steps of using Advent CAM325
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Advent CAM325
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Advent CAM325 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Advent CAM325?

Use the form below

If you did not solve your problem by using a manual Advent CAM325, ask a question using the form below. If a user had a similar problem with Advent CAM325 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)