Manual Pelco EU3512-3X

12 pages 0.33 mb
Download

Go to site of 12

Summary
  • Pelco EU3512-3X - page 1

    INST ALLA TION EU3512-3X Environmental Enclosure and Light Duty W all Mount C2428M-B (1/06) ...

  • Pelco EU3512-3X - page 2

    ...

  • Pelco EU3512-3X - page 3

    C2428M-B (1/06) 3 Important Safety Instructions Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Only use attachments/accessories specifi ed by the manufacturer. 6. Use only with the cart, stand, tr ...

  • Pelco EU3512-3X - page 4

    4 C2428M-B (1/06) Description The EU3512-3X is an indoor/outdoor light-duty camera enclosure and light-duty wall mount. The enclosure includes a sun shroud and 230 VAC heater and defroster. The wall mount has an adjustable tilt table allowing for mechanical positioning of the enclosure. Install the EU3512-3X to any wall or vertical surface capable ...

  • Pelco EU3512-3X - page 5

    C2428M-B (1/06) 5 I nstallation INST ALL WALL MOUNT 1. Drill holes in mounting surface using the mount as a template and attach the mount securely with the recommended fasteners. • If you are attaching the mount to a solid surface, use the two top outside holes and the bottom center hole. Secure with three 0.25-inch diameter fasteners (not suppli ...

  • Pelco EU3512-3X - page 6

    6 C2428M-B (1/06) CAMERA AND LENS INST ALLA TION 1. T o install the camera and lens onto the enclosure sled: a. Extend the lens to the maximum length. b. Position the camera and lens so that they do not extend beyond the track. c. Fasten the camera and lens to the sled with the two, 1/4-20 x 0.375 Phillips screws (supplied). The edges of the sled a ...

  • Pelco EU3512-3X - page 7

    C2428M-B (1/06) 7 Figure 1. Wiring Diagram T able A. Heater and Defroster Wiring Distances The following cable sizes are the minimum recommended for use with the heater and defroster . WARNING: When using a single power source for both camera and accessories, consider the camera power consumption when determining the wire gauge. Input Voltage Power ...

  • Pelco EU3512-3X - page 8

    8 C2428M-B (1/06) Example: An enclosure that requires 30 V A and is installed 94 feet (28 m) from the transformer would require a minimum wire gauge of 20 AWG. NOTE: Distances are calculated in feet; values in parentheses are meters. *Minimum cable requirements: 75 ohms impedance All-copper center conductor All-copper braided shield with 95% braid ...

  • Pelco EU3512-3X - page 9

    C2428M-B (1/06) 9 Specifications ENCLOSURE Camera Mounting Multiple holes on adjustable camera sled; camera sled mounts in threaded strip for easier removal and can be inverted for additional camera elevation Camera and Lens Size Accommodates camera and lens combinations (including BNC connector) 2.87” W x 3.00” H x 9.00” L (7.28 x 7.62 x 22 ...

  • Pelco EU3512-3X - page 10

    10 C2428M-B (1/06) Figure 2. Enclosure Dimension Drawing Figure 3. Mount Dimension Drawing NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE IN INCHES. 12.75 (32.38) 11.25 (28.57) 2.0 (5.08) 14.75 (37.47) 3.8 (9.86) 5.1 (13.0) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE IN INCHES. 10.53 (26.75) 3.48 (8.84) 11.08 (28.14) 2. ...

  • Pelco EU3512-3X - page 11

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series p ...

  • Pelco EU3512-3X - page 12

    Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Home Security System

Documents that we receive from a manufacturer of a Pelco EU3512-3X can be divided into several groups. They are, among others:
- Pelco technical drawings
- EU3512-3X manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco EU3512-3X
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco EU3512-3X.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco EU3512-3X, service manual, brief instructions and user manuals Pelco EU3512-3X. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco EU3512-3X.

Similar manuals

A complete manual for the device Pelco EU3512-3X, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco EU3512-3X by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco EU3512-3X.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco EU3512-3X - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco EU3512-3X, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco EU3512-3X, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco EU3512-3X - which should help us in our first steps of using Pelco EU3512-3X
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco EU3512-3X
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco EU3512-3X in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco EU3512-3X?

Use the form below

If you did not solve your problem by using a manual Pelco EU3512-3X, ask a question using the form below. If a user had a similar problem with Pelco EU3512-3X it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)