English dropdown-ico

Manual Alvarez SA1232z

19 pages 1.25 mb
Download

Go to site of 19

Summary
  • Alvarez SA1232z - page 1

    1 SA1232z REPAIR MANUAL ...

  • Alvarez SA1232z - page 2

    2 These instructions are intended to help restore any ailing SA1232z Active Loudspeaker back to factory working conditions. They show how to remove and replace the drivers and the ampli fi er assembly. Please contact Mackie Tech Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. The ...

  • Alvarez SA1232z - page 3

    3 Led PCB replacement: 3 Carefully begin to remove the grill. Do not fully remove the grill as the cable is still fi rmly attached to the led PCB assembly. A fl at head screwdriver may aid in loosening the grill from the cabinet. 2 Keep the ten screws in a safe place. 4 Carefully remove the cable attached to the led PCB assembly. 1 Five screws ne ...

  • Alvarez SA1232z - page 4

    4 6 Carefully remove the led PCB assembly from the back side of the grill. Led PCB replacement continued: 7 The hard part is done, the rest is easy! Place the new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1232z and the led should light up. Congratulations, you just r ...

  • Alvarez SA1232z - page 5

    5 Bottom woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the bottom woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 3 Keep the eight screws and fl at washers in a safe place. Note: There are two differe ...

  • Alvarez SA1232z - page 6

    6 Bottom woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and bottom woofer removed . Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1, making sure to keep the led PCB assembly cable in front of the woofer. Power up the SA1232z a ...

  • Alvarez SA1232z - page 7

    7 Top woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the top woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 1 2 3 4 5 6 7 8 3 Keep the eight screws and fl at washers in a safe place. Note: There are t ...

  • Alvarez SA1232z - page 8

    8 Top woofer replacement continued: 6 The picture on the right shows what the SA1232z looks like with the grill and top woofer removed. Place the new woofer (part #0013920) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the SA1232z and the new woofer should now be pumping out glorious lows. Awesome, you just r ...

  • Alvarez SA1232z - page 9

    9 High Frequency Driver replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the high frequency driver. 2 Fourteen screws and washers need to be removed from the horn assembly using the phillips head screwdriver. 3 Keep the fourteen screws and fl at washers in a safe place ...

  • Alvarez SA1232z - page 10

    10 High Frequency Driver replacement continued: 5 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequency driver terminals. Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 4 Carefully begin to remove the entire horn assembly (with the high and m ...

  • Alvarez SA1232z - page 11

    11 High Frequency Driver replacement continued: 7 This is what it looks like with the grill and horn removed. See right side for further instructions and additional pictures on how to remove and replace the high frequency driver. 8 Four screws and locking washers may be removed from the high frequency driver using the phillips head screwdriver. Not ...

  • Alvarez SA1232z - page 12

    12 9 Keep the four screws and locking washers in a safe place. High Frequency Driver replacement continued: 11 Turning the high frequency driver over reveals the cover plate which needs to be removed using the phillips head screwdriver. Keep the four screws in a safe place. Replace with the new driver (part #0013925) and follow the same steps as ab ...

  • Alvarez SA1232z - page 13

    13 3 A closeup of the high frequency driver is shown above. Four screws need to be removed from the driver using the 3mm allen wrench. 4 Keep the four screws in a safe place. 5 The diaphragm and plate adapter are easily removed from the horn assembly. They may not be broken down any further. Place the new diaphragm (part # coming soon) and plate as ...

  • Alvarez SA1232z - page 14

    14 Mid Frequency Driver replacement: 1 Follow steps 1-6 of the high frequency driver replacement instructions, as the grill and horn assembly will need to be removed in order to access the mid frequency driver. 2 Eight screws and locking washers may be removed from the mid frequency driver cover plate using the phillips head screwdriver. 3 Keep the ...

  • Alvarez SA1232z - page 15

    15 Mid Frequency Driver replacement continued: 5 Four screws and locking washers may be removed from the mid frequency driver using the phillips head screwdriver. Contrary to what the picture shows, the screws are actually about 2 3/4 ” down from the top of the horn assembly. Also note that the screws may be tighter than usual. Please DO NOT add ...

  • Alvarez SA1232z - page 16

    16 Ampli fi er Assembly replacement: 1 Eighteen screws need to be removed from the ampli fi er assembly using the phillips head screwdriver. The ampli fi er assembly is capped by two cover plates outlined above. 3 The covers may be worked loose by wedging a fl at head screwdriver in between the cabinet and the cover, as well as the ampli fi er ...

  • Alvarez SA1232z - page 17

    17 Ampli fi er assembly replacement continued: 4 Once the two cover plates are removed, two more screws need to be taken out in order to separate the ampli fi er assembly from the cabinet. Keep the two screws in a safe place. 5 The ampli fi er assembly is now ready to be separated from the cabinet. Do not completely take the ampli fi er assembl ...

  • Alvarez SA1232z - page 18

    18 Ampli fi er assembly replacement continued: 6 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to the ribbon cable. The cable only fi ts in one way. 7 Now for the closeups of the woofer and driver terminals. Make sure the cables are reconnected to the same terminals they were removed from (but ...

  • Alvarez SA1232z - page 19

    19 7 Place the new ampli fi er assembly (part #0013840-00) where the old one was. Follow the same steps as above, but backwards 6 to 1. Remove the serial number from the faulty ampli fi er assembly (as shown in picture above) and place on the new ampli fi er assembly. Power up the SA1232z and relish in the fact that you just replaced an ampli ? ...

Manufacturer Alvarez Category Car Speaker

Documents that we receive from a manufacturer of a Alvarez SA1232z can be divided into several groups. They are, among others:
- Alvarez technical drawings
- SA1232z manuals
- Alvarez product data sheets
- information booklets
- or energy labels Alvarez SA1232z
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alvarez SA1232z.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alvarez SA1232z, service manual, brief instructions and user manuals Alvarez SA1232z. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alvarez SA1232z.

Similar manuals

A complete manual for the device Alvarez SA1232z, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alvarez SA1232z by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alvarez SA1232z.

A complete Alvarez manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alvarez SA1232z - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alvarez SA1232z, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alvarez SA1232z, that we can find in the current document
3. Tips how to use the basic functions of the device Alvarez SA1232z - which should help us in our first steps of using Alvarez SA1232z
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alvarez SA1232z
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alvarez SA1232z in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alvarez SA1232z?

Use the form below

If you did not solve your problem by using a manual Alvarez SA1232z, ask a question using the form below. If a user had a similar problem with Alvarez SA1232z it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)