English dropdown-ico

Manual Powerware 5000

66 pages 1.12 mb
Download

Go to site of 66

Summary
  • Powerware 5000 - page 1

    Powerware 9125 Two-in-One UPS 5000/6000 VA User’s Guide ® ...

  • Powerware 5000 - page 2

    Class A EMC Statements FCC Part 15 NOTE This equipment has been tested and found to comply with th e limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environm ent. This equipment generates, ...

  • Powerware 5000 - page 3

    Requesting a Declaration of Conformity Units that are labeled with a CE mark comply with the following harmonized standa rds and EU directives: S Harmonized Standards: EN 50091 - 1 - 1 and EN 50091-2; IEC 60950 Third Edition S EU Directives: 73/23/EEC, Council Di rective on equipment designed for use within certain voltage limits 93/68/EEC, Amendin ...

  • Powerware 5000 - page 4

    Special Symbols The following are examples of symbols used on the UPS or accessories to alert you to important information: RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the associated warning should be observed. CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for additional information, s ...

  • Powerware 5000 - page 5

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com i Table of Contents 1 Introduction 1 ......................................................... 2 Safety Warnings 3 ..................................................... 3 Installation 15 .......................................................... ...

  • Powerware 5000 - page 6

    TABLE OF CONTENTS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com ii Replacing Batteries 42 .................................................................... How to Replace Extended Battery Modules 42 ................................................ How to Replace Internal Batteries 44 ... ...

  • Powerware 5000 - page 7

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 1 Chapter 1 Introduction The Powerware ® 9125 uninterruptible power system (UPS) protects your sensitive electronic equipment from the most common power problems including power failures, power sags, power surges, brownouts, line noise, high vo ...

  • Powerware 5000 - page 8

    INTRODUCTION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 2 Providing outstanding performance and reliability, the Powerware 9125’s unique benefits include the following: S Online UPS design with pure sine wave output. The UPS filters and regulates incoming AC power and provides consiste ...

  • Powerware 5000 - page 9

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 3 Chapter 2 Safety Warnings IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions t hat you should follow during installation and maintenance of the UPS and batteries. Pleas e read all instructions bef ...

  • Powerware 5000 - page 10

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 4 CAUTION S Batteries can present a risk of electrical s hock or burn from high short-circuit current. Observe proper precautions. Servicing should be performed by qualified service personnel knowledgeable of batteries and requir ...

  • Powerware 5000 - page 11

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 5 ADVARSEL S Batterier kan udgøre en fare for elektrisk stød eller forbrændinger forårsaget af høj kortslutningsspænding. De korrekt e forholdsregler bør overholdes. S Korrekt bortskaffelse af batterier er påkrævet. Over ...

  • Powerware 5000 - page 12

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 6 OPGELET S Batterijen kunnen gevaar voor elektrische sc hok of brandwonden veroorzaken als gevolg van un hoge kortsluitstroom. Vol g de desbetreffende aanwijzingen op. S De batterijen moeten op de juiste wijz e worden opgeruimd. ...

  • Powerware 5000 - page 13

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 7 Consignes de sécurité CONSIGNES DE SÉCURITÉ IMPORTANTES CONSERVER CES INSTRUCTIONS CE MANUEL CONTIENT DES CONSIGNES DE SÉCURITÉ IMPORTANTES DANGER! Cet onduleur contient des TENSIONS MORTE LLES. Toute opération d’entre ...

  • Powerware 5000 - page 14

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 8 Sicherheitswarnungen WICHTIGE SICHERHEITSANWEISUNGEN AUFBEWAHREN. DIESES HANDBUCH ENTHÄLT WICHTIGE SICHERHEITSANWEISUNGEN. WARNUNG Die USV führt lebensgefährliche Spannungen. A lle Reparatur- und Wartungsarbeiten sollten nur ...

  • Powerware 5000 - page 15

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 9 Avvisi di sicurezza IMPORTANTI ISTRUZIONI DI SICUREZZA CONSERVARE QUESTE ISTRUZIONI QUESTO MANUALE CONTIENE IMPORTANTI ISTRUZIONI DI SICUREZZA PERICOLO la TENSIONE contenuta in questo gruppo statico d i continuità è LETALE. T ...

  • Powerware 5000 - page 16

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 10 Viktig Sikkerhetsinformasion FARLIG Denne UPS’en inneholder LIVSFARLIGE SPENNI NG ER. All reparasjon og service må kun utføres av AUTORISERT SERVICEPERSONA LE. BRUKERE KAN IKKE UTFØRE SERVICE PÅ NOEN AV DELENE i UPS’en ...

  • Powerware 5000 - page 17

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 11 Regulamentos de Segurança INSTRUÇÕES DE SEGURANÇA IMPORTANTES GUARDE ESTAS INSTRUÇÕES ESTE MANUAL CONTÉM INSTRUÇÕES DE SEGURANÇA IMPORTANTES CUIDADO A UPS contém VOLTAGEM MORTAL. Todos os reparos e assistência téc ...

  • Powerware 5000 - page 18

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 12 Предупреждения по мерам безопасности ВАЖНЫЕ УКАЗАНИЯ ПО МЕРАМ БЕЗОПАСНОСТИ СОХРАНИТЕ ЭТИ УКАЗАНИЯ ДАННОЕ РУКОВОДСТВО СОД ...

  • Powerware 5000 - page 19

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 13 Advertencias de Seguridad INSTRUCCIONES DE SEGURIDAD IMPORTANTES GUARDE ESTAS INSTRUCCIONES ESTE MANUAL CONTIENE INSTRUCCIONES DE SEGURIDAD IMPORTANTES PELIGRO Este SIE contiene VOLTAJES MORTALES. Todas las reparaciones y el s ...

  • Powerware 5000 - page 20

    SAFETY WARNINGS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 14 Säkerhetsföreskrifter VIKTIGA SÄKERHETSFÖRESKRIFTER SPARA DESSA FÖRESKRIFTER DENNA BRUKSANVISNING INNEHÅLLER VIKTIGA SÄKERHETSFÖRESKRIFTER FARA Denna UPS-enhet innehåller LIVSFARLIG SPÄNNING . ENDAST AUKTORISERAD SER ...

  • Powerware 5000 - page 21

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 15 Chapter 3 Installation This section explains: S Equipment inspection S UPS setup and installation S Extended Battery Module (EBM) installation S Remote emergency power - off (REPO) installation Inspecting the Equipment If any equipment has be ...

  • Powerware 5000 - page 22

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 16 Installing the UPS Internal Batteries CAUTION The UPS battery trays are heavy (28.1 kg/62 lb). A minimum of two people are required to lift the battery trays into the UPS chassis. NOTE For rack - mounted installations, follow t h ...

  • Powerware 5000 - page 23

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 17 5. If you are installing the UPS in a tower configuration, continue to the following section, “Tower Setup.” If the UPS is in a rack and you are installing an optional EBM, continue to “EBM Installation” on page 19; other ...

  • Powerware 5000 - page 24

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 18 Figure 6. UPS Cabinet with Pedestals 5. Carefully position the cabinets upright (see Figure 7). NOTE The EBM(s) must be installed to the right of the UPS as shown in Figure 7. Joining brackets are required for installations with ...

  • Powerware 5000 - page 25

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 19 6. Align each joining bracket with the adjacent cabinet screw holes and secure with the supplied screws (see Figure 8). 7. If installing additional cabinets, repeat Step 6 for each cabinet. Joining Bracket EBM UPS Joining Bracket ...

  • Powerware 5000 - page 26

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 20 3. Continue to the following section, “Plug - Receptacle UPS Installation,” or “Hardwired UPS Installation” on page 24. UPS Battery Connector EBM Cable EBM Battery Connectors Battery Circuit Breakers Battery Circuit Break ...

  • Powerware 5000 - page 27

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 21 Plug-Receptacle UPS Installation NOTE Do not make unauthorized changes to the UPS; otherwise, damage may occur to your equipment and void your warranty. To install the UPS: 1. If you are installing power management software, conn ...

  • Powerware 5000 - page 28

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 22 7. Plug the UPS power cord into an L6 - 30R power outlet. The μ indicator flashes, indicating the UPS is in Standby mode with the equipment offline. 8. Press the On b u t t o n( s e eF i g u r e1 4o np a g e3 1 ) . The μ indica ...

  • Powerware 5000 - page 29

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 23 WARNING The REPO circuit is an IEC 60950 safety extra low v oltage (SELV) circuit. This circuit must be separated from any hazardous voltage ci rcuits by reinforced insulation. CAUTION To ensure the UPS stops supplying power to t ...

  • Powerware 5000 - page 30

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 24 Hardwired UPS Installation WARNING Only qualified service personnel (such as a licensed electrician) shall pe rform the electrical installation. Risk of electrical shock. CAUTION S For UPS models with hardwired outputs, overcurre ...

  • Powerware 5000 - page 31

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 25 To hardwire the UPS: 1. If you are installing power management software, connect your computer to the USB port or UPS communication port (see page 37). For the communication port, use only the serial cable supplied in the accesso ...

  • Powerware 5000 - page 32

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 26 6. Connect the input and ground wires to the UPS terminal block according to Figure 13 and Table 1. 7. Connect the output and ground wires to the UPS terminal block according to Figure 13 and Table 1. L1 Out Output Ground L1 In L ...

  • Powerware 5000 - page 33

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 27 8. Replace the wiring access cover and the conduit landing plate. 9. Remove the breaker tie from all battery circuit breakers. 10. Switch all battery circuit breakers to the ON ( | ) position. 11. If an emergency power - off (dis ...

  • Powerware 5000 - page 34

    INSTALLATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 28 ...

  • Powerware 5000 - page 35

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 29 Chapter 4 Operation This section describes: S Turning the UPS on and off S Starting the UPS on battery S Initiating the battery test S Transferring the UPS to Bypass mode S Operating modes Turning the UPS On After the UPS is connected to util ...

  • Powerware 5000 - page 36

    OPERATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 30 Turning the UPS Off NOTE Pressing the Off button while the UPS is in Battery mode causes the UPS to shut down immediately. To turn off the UPS: 1. Prepare your equipment for shutdown. 2. Press and hold the Off button for approximate ...

  • Powerware 5000 - page 37

    OPERATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 31 Transferring the UPS to Bypass Mode NOTE When the UPS is in Bypass mode, Battery mode is not available and the UPS does not protect against power out ages; however, the utility power continues to be passively filtered by the UPS. Pr ...

  • Powerware 5000 - page 38

    OPERATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 32 Normal Mode During Normal mode, the μ indicator illuminates and the front panel displays the percentage of UPS load capacity being used by the protected equipment (see Figure 15). The UPS monitors and charges the batteries as neede ...

  • Powerware 5000 - page 39

    OPERATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 33 Battery Mode When the UPS is operating during a power outage, the alarm beeps once per second and the + --- indicator illuminates. The front panel displays the approximate percentage of battery capacity remaining (see Figure 16). Wh ...

  • Powerware 5000 - page 40

    OPERATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 34 Bypass Mode In the event of a UPS overload or internal failure, the UPS transfers your equipment to utility power. Battery mode is not available; however, the utility power continues to be passively filtered by the UPS. The indicato ...

  • Powerware 5000 - page 41

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 35 Chapter 5 Configuration When the UPS is in Configuration mode, the bar graph indicators represent the configuration options. Use the control buttons (On button and button) to modify the UPS configuration. Figure 17 shows the LEDs and Table 2 ...

  • Powerware 5000 - page 42

    CONFIGURATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 36 1 Press and hold the On and Test/Alarm Reset buttons simultaneously for three seconds to toggle between Configuration and Operation modes. & 4 Press the Test/Alarm Reset button ONCE to select the option. 3 Press the On butto ...

  • Powerware 5000 - page 43

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 37 Chapter 6 Communication The Powerware 9125 UPS is equipped with a USB port, a DB-9 communication port, and an X - Slot communication bay (see Figure 18). Either the USB port or the DB - 9 communication port may be used to monitor the UPS; how ...

  • Powerware 5000 - page 44

    COMMUNICATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 38 DB-9 Communication Port To establish communication between the UPS and a computer, connect your computer to the UPS communication port using the supplied communication cable (see Figure 18). When the communication cable is insta ...

  • Powerware 5000 - page 45

    COMMUNICATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 39 X-Slot Cards X - Slot cards allow the UPS to communicate in a variety of networking environments and with different types of devices. The Powerware 9125 has an available communication bay for one of the following X - Slot cards: ...

  • Powerware 5000 - page 46

    COMMUNICATION EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 40 ...

  • Powerware 5000 - page 47

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 41 Chapter 7 UPS Maintenance This section explains how to: S Care for the UPS and batteries S Replace the batteries S Test new batteries S Recycle used batteries or UPS UPS and Battery Care For the best preventive maintenance, keep the area arou ...

  • Powerware 5000 - page 48

    UPS MAINTENANCE EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 42 Replacing Batteries NOTE DO NOT DISCONNECT the batteries while the U PS is in Battery mode. With the hot - swappable battery feature, UPS batteries can be replaced easily without turning the UPS off or disconnecting the load. ...

  • Powerware 5000 - page 49

    UPS MAINTENANCE EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 43 5. Replace the EBM. See “Recycling the Used Battery or UPS” on page 46 for proper disposal. 6. Reinstall the joining brackets if removed in Step 3. 7. Plug the new EBM into the UPS as shown in Figure 21. For additional EBM ...

  • Powerware 5000 - page 50

    UPS MAINTENANCE EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 44 How to Replace Internal Batteries CAUTION S The UPS battery trays are heavy (28.1 k g/62 lb). A minimum of two people are required to lift the battery trays into the UPS chassis. S Pull the battery trays out onto a flat, stabl ...

  • Powerware 5000 - page 51

    UPS MAINTENANCE EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 45 5. Slide the new battery trays into the chassis. 6. Reinstall the battery retaining bracket. 7. Replace the lower UPS front cover. Testing New Batteries NOTE The batteries must be fully charged and the UPS must not be in Batte ...

  • Powerware 5000 - page 52

    UPS MAINTENANCE EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 46 Recycling the Used Battery or UPS Contact your local recycling or hazardous waste center for information on proper disposal of the used battery or UPS. WARNING S Do not dispose of the battery or batteries in a fire. Batteries ...

  • Powerware 5000 - page 53

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 47 Chapter 8 Specifications This section provides the following specifications: S Model list S Electrical input and output S Environmental and safety S Weights and dimensions S Battery Table 4. Model List Model Number Power Levels (Rated at Nomi ...

  • Powerware 5000 - page 54

    SPECIFICATIONS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 48 Table 6. Electrical Output Regulation (Normal Mode) Nominal output voltage ±3% Regulation (Battery Mode) Nominal output voltage ±3% Voltage Waveform Normal mode: Sine wave; <3% THD with linear or PFC load; <6% with nonl ...

  • Powerware 5000 - page 55

    SPECIFICATIONS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 49 Table 8. Weights and Dimensions UPS Extended Battery Module (EBM) Dimensions (WxDxH) 44.2 x 68.3 x 21.8 cm 17.4” x 26.9” x 8.6” (5U) 4 4 . 2x6 8 . 3x1 3c m 17.4” x 26.9” x 5.1” (3U) Weights UPS Chassis: 35 kg (77 lb ...

  • Powerware 5000 - page 56

    SPECIFICATIONS EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 50 ...

  • Powerware 5000 - page 57

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 51 Chapter 9 Troubleshooting This section explains: S UPS alarms and conditions S H o wt os i l e n c ea na l a r m S Service and support Audible Alarms and UPS Conditions The UPS has an audible alarm feature to alert you of potential power prob ...

  • Powerware 5000 - page 58

    TROUBLESHOOTING EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 52 Table 11. Troubleshooting Guide Alarm or Condition Possible Cause Action The indicator is not on; the UPS does not start. μ The power cord is not connected correctly. Check the power cord connections. The wall outlet is fault ...

  • Powerware 5000 - page 59

    TROUBLESHOOTING EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 53 Action Possible Cause Alarm or Condition Bypass UPS is in Bypass mode. The equipment is transferred to utility power; however, the utility power continues to be passively filtered by the UPS. Check for one of the following ala ...

  • Powerware 5000 - page 60

    TROUBLESHOOTING EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 54 Service and Support If you have any questions or problems with the UPS, call your Local Distributor or the Help Desk at one of the following telephone numbers and ask for a UPS technical representative. United States: 1-800-35 ...

  • Powerware 5000 - page 61

    EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 55 Chapter 10 Warranty Two-Year Limited Warranty (US and Canada) Powerware UPS Models: 3105, 3110, 3115, 9104, 9120, 9125, and FERRUPS ® up to 3.1 kVA WARRANTOR: The warrantor for the limited warranties set forth herein is Eaton Power Quality C ...

  • Powerware 5000 - page 62

    WARRANTY EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 56 WHAT THIS LIMITED WARRANTY DOES NOT COVER: This Warranty does not cover any defects or damages caused by: (a) failure to properly store the Product before installation, including the charge of batteries no later than the date indicat ...

  • Powerware 5000 - page 63

    WARRANTY EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 57 COSTS NOT RELATED TO WARRANTY: The End-User shall be invoiced for, and shall pay for, all services not expressly provided for by the terms of this Warranty, incl uding without limitation, site calls involving an inspection that deter ...

  • Powerware 5000 - page 64

    WARRANTY EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 58 WHAT THIS LIMITED WARRANTY DOES NOT COVER: This Warranty does not cover any defects or damages caused by: (a) failure to properly store the Product before installation, including the charge of batteries no later than the date indicat ...

  • Powerware 5000 - page 65

    WARRANTY EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 59 OTHER LIMITATIONS: Company’s obligations under this Warranty are expressly conditioned upon receipt by Company of all payments due to it (including interest charges, if any). During such time as Company has not received payment of ...

  • Powerware 5000 - page 66

    WARRANTY EATON Powerware ® 9125 Two-in-One UPS (5000/6000 VA) User’s Guide S 164201513 Rev B www.powerware.com 60 WHAT THIS GUARANTY DOES NOT COVER: Any reimbursement or repair to End - User’s equipment does not include reimbursement for or restoration of any data l oss. This Guaranty does not cover any defects or damages caused by: (a) failur ...

Manufacturer Powerware Category Power Supply

Documents that we receive from a manufacturer of a Powerware 5000 can be divided into several groups. They are, among others:
- Powerware technical drawings
- 5000 manuals
- Powerware product data sheets
- information booklets
- or energy labels Powerware 5000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Powerware 5000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Powerware 5000, service manual, brief instructions and user manuals Powerware 5000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Powerware 5000.

Similar manuals

A complete manual for the device Powerware 5000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Powerware 5000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Powerware 5000.

A complete Powerware manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Powerware 5000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Powerware 5000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Powerware 5000, that we can find in the current document
3. Tips how to use the basic functions of the device Powerware 5000 - which should help us in our first steps of using Powerware 5000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Powerware 5000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Powerware 5000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Powerware 5000?

Use the form below

If you did not solve your problem by using a manual Powerware 5000, ask a question using the form below. If a user had a similar problem with Powerware 5000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)