-
EMC DS-16B - page 1
EMC Enterpr ise Storage EMC Corporation 171 South S treet, Hopkinton, M A 017 48-9103 Cor por ate Headquar ters : (508) 435-1000, (800 ) 4 24-EMC2 Fax : (508) 435-5374 Ser vice : (800 ) SVC-4EMC Depar tmental Switch Model DS-16B HARDW ARE REFERENC E MANUAL P/N 0140029 99-00 ...
-
EMC DS-16B - page 2
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Contents Copy right © 2000 EM C Corpo rati on. All rig hts reserve d. Print ed May 2000 No part of this pub lication may be re produced or distrib uted in any fo rm or by a ny mean s, or stor ed in a databas e or retrie val system , without the prior written consent of EMC Corpor ation ...
-
EMC DS-16B - page 3
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Conte nts Japan: United States: This eq uipment ge nerates, u ses, and may e mit radio fre quency energy. T he eq uipment ha s been ty pe tes ted and found to comply w ith the limit s for a Class A digital d evice pursuant to Part 15 of FCC rules, which are designed to pro vide reasonabl ...
-
EMC DS-16B - page 4
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Contents Trade mark Info rmatio n EMC 2 (the EMC logo), EMC, ICDA (Integrated Cached Disk Array), MOSAIC:2000, and Symmetrix are registered trademarks and EMC Enterpr ise Storage, EMC Sto rage Logic, Celerra, Co pyPoint, Da taReach, EDM, EOS, E xtended-O nline, FarP oint, Info Mover, Po ...
-
EMC DS-16B - page 5
Depar tmental Sw itch Model DS -16B Hardware Reference Manual FCC W arning (USA only) This equipm ent has been tested and complies w ith the limits for a Class A computing d e vice pursuant to Part 15 of the FCC Rules. These limits are desi gned to provide r easonable pr otection against harmful interference when equipment is oper ated in a commerc ...
-
EMC DS-16B - page 6
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l W arning s and Cautions - EN610 00-4-3 Rad i a ted RF - EN61000- 4-4 Electrical Fast T ransients - EN61000- 4-5 Surge - EN610 00-4-6 Con ducted RF - EN61000- 4-1 1 Line Interr uption Low V oltage Dir ective (L VD) 73/23 /EEC and the Comple mentary Dir ective 93 /68/EEC: - EN 60950:92 A1 ...
-
EMC DS-16B - page 7
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Notic es ............ ............................ ............................. ............................ ...................... ........ v Preface ........................ ............................ ............................ ............................ ............... xiii Cha ...
-
EMC DS-16B - page 8
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Contents Chap t er 3 Switch Management Comparing Switch Management A ccess Methods .............. ........ 3-2 Managing Through Fr o nt Pane l Buttons ......... ................. ............. 3-3 Contr ol Buttons ........................... ........... ................. ........... ... ...
-
EMC DS-16B - page 9
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Conte nts Appendix C Error Mess ages Erro r Message Formats .................. ....................... ................. ........ C-2 Front Panel Message Formats ....................... ................. ........ C - 2 Diagnostic Error Message Formats .... ................. ........... . ...
-
EMC DS-16B - page 10
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Contents ...
-
EMC DS-16B - page 11
Depar tmental Sw itch Model DS -16B Hardware Reference Manual 1-1 Departmental Switch Model 16B Front Panel ........... ................. .............. 1-2 2-1 Model DS-16B with Two Power Supplies ....... ........... ................. ........... ... 2-3 2-2 Dual SC Fiber Optic Plug connector ...................... ........... ................. .. ...
-
EMC DS-16B - page 12
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Figures ...
-
EMC DS-16B - page 13
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Preface As part o f its effort to cont inuously imp r ove and e nhance the pe rformance and capabilities of it s product line, EMC periodi c ally releases new revisions of hardwar e and microcode . Theref ore, s ome functions described in this manual may not be supported by all r evision ...
-
EMC DS-16B - page 14
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Preface How this Manual is Organized The following table describes how the manual is organiz ed. Related Publications Oth er publications that may provide related informa tion include: • Departm ental Switc h Model DS-8B or DS- 16B F abric OS Refer ence Manual (06900 1028) • Fibre C ...
-
EMC DS-16B - page 15
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Preface DANGER A danger notice con t ains information essent i al to avoid a hazar d that will cause severe pe rsonal injury , death, or subs tantial pr o per ty damage if you i gnore the warning. EMC uses the follow ing type style conventions in th is guide: Where to Get Help Obtain tec ...
-
EMC DS-16B - page 16
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Preface ...
-
EMC DS-16B - page 17
Introduction 1 Invisible Body T ag • Intro duction ................. ........... ................. ........... ................. ........... .... 1-2 • System Components .................... ................. ........... ................. ......... 1-4 Intr oduction ...
-
EMC DS-16B - page 18
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Introdu ction Intr oduction Figure 1-1 Departmental Switch Model 16B Front P anel The Departmen t Switch Model 16B is a 16-po rt Fibr e Chann el Gigabit switch t h at provides connectivity for up to 16 Fibr e Channel compliant device ports, an d a fabric operating system f or building a ...
-
EMC DS-16B - page 19
Introduction Introdu ction • Reli able – Highly integra ted, reliable, mult ifunction (ASIC) devices ar e used throughout the switch. • High perf ormanc e – Low-latency , high-perform ance design resulting in a worst-ca se d ata-tran sfer latency of less than tw o microsec onds from an y port at pe ak Fibre Channel perf ormance of 100 MB/se ...
-
EMC DS-16B - page 20
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Introdu ction System Com ponents The motherboar d is enclosed in an air-cooled chassis which may be either mounted in a standar d rack or used as a standalone unit. The chassis includes an RJ -45 Ethernet connection for switch set up and managem ent. Fabric Oper ating Syste m Included w ...
-
EMC DS-16B - page 21
Installatio n 2 Invisible Body T ag • Unpacking the Switch ...................... ................. ................. ............... 2-2 • Site Considerations ........................... ............................. .................... 2-3 • Installation Considerations ... ................. ............................ ........... .... 2-4 ...
-
EMC DS-16B - page 22
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Installation Unpac king the Switch While unpacking the switch, check to make sure the following items are included: • Switch un it • Reque sted GBI C modules • Accessory kit co ntaining the following: • Power cord, if o rder ed • Manual s • Softwar e Feature Guides • Rubbe ...
-
EMC DS-16B - page 23
Site Conside r a tions Installa tion Site Co nsideration s Cooling Requiremen ts Cooling air is drawn into th e chassis by four fans mounted near the rear of the chassis, venting exhausted air through the front of the switch. Do not bl ock the front or rear air vents. The swit ch must have free acces s to ambie nt air for cooling. Powe r R eq ui re ...
-
EMC DS-16B - page 24
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Installation Installation Considera tions The switch h as optional mou nting hardwar e to m ount the switch in a standar d 19-inch rack. If the switch has had its rubber mounting feet installed, they may need to be r emoved for a rack installation. Stand alone The switch is shipped in i ...
-
EMC DS-16B - page 25
Installa tion Considerations Installa tion Fiber cable connections ar e made to the switch ’ s fr ont pane l using standar d dual SC plug connectors as shown in Figure 2-2. Figure 2-2 Dual SC Fiber Optic Plug connector The connectors are keyed and must be ins erted into the GBIC module ’ s connector in proper alignment. In most cases, one o f t ...
-
EMC DS-16B - page 26
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Installation ...
-
EMC DS-16B - page 27
Switch M anagement 3 Invisible Body T ag • Comparing Switch Managem ent Access Methods ................... .... 3-2 • Managing Thr ough Front Panel Buttons .................... ................ .... 3-3 • DS-16B Switch Menus ................. ................. ............................ ......... 3-5 Switch Management ...
-
EMC DS-16B - page 28
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Comparing Switch Management A c cess Methods There ar e severa l access methods for managing a s witch. T a ble 3 -1 summ arizes the dif fer ent mana gement acc ess method s. An adv anced se t of contr ols and dis plays ar e available usin g a T eln et connecti on for ...
-
EMC DS-16B - page 29
Managing Through Front Panel Buttons Swit ch Mana gement Managing Through Fr ont Panel Buttons Figure 3-1 shows the front panel button s. Figure 3-1 Front P anel Functionality Control Buttons T able 3-2 lists the prim ary control button function s. The function of the button changes depending on the menu level. Buttons either control navigating th ...
-
EMC DS-16B - page 30
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Activ ating Menu Display The switch ’ s front panel display is n ormally not il luminated. Pressing the front panel buttons activa tes the display: If no comman d is issued, the d isplay turns off after 30 secon ds. Select Menu: Configuration Menu ...
-
EMC DS-16B - page 31
DS-16B Sw itch Menus Swit ch Mana gement DS-16B Sw itch Menus The following m enus are controlled using the front panel buttons: Figure 3-2 Menu Hierarch y C o nf i gur at i on M enu O per at i on M enu Te s t M e n u Ch oo se Men u - E t her net I P Addres s - D o m a i n - BB_ cr e di t - R _ A _T O V - E _D _ T O V - O per at i ng M od e - V C L ...
-
EMC DS-16B - page 32
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Commands T able 3-3 shows the f r ont pa nel commands and their equivalent Te l n e t c o m m a n d . Ta b l e 3 - 3 Front P anel and T elnet Commands Menu Front Panel T elne t Command Default Configuration Etherne t IP Address ipAddrSet 10.1.2.3 Etherne t Submask ipAd ...
-
EMC DS-16B - page 33
DS-16B Sw itch Menus Swit ch Mana gement Unset QuickLoop Port configure 0 QuickLoop P ar tner WWN a/Partner 00:00:00:00:00:00 :00:00 Reset to Default configDefault N /A Operation Switc h Offl ine SwitchDisa b le N/A Switch Onl ine Sw itchEnab le N/A P or t Disable por tDisable <por tno> N/A P or t Enable por tEnab le <por tno> N/A Quick ...
-
EMC DS-16B - page 34
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management P or t Throughput portPerfShow N/A T emperature tempShow N/A Error L og errShow N/A Licenses licenseShow N/A T est Switch Offline SwitchDisable N/A Switch Onl ine Sw itchEnab le N/A Memor y T est ramT est N/A P or t Register T est por tRegT est N/A Central Memor y T es ...
-
EMC DS-16B - page 35
DS-16B Sw itch Menus Swit ch Mana gement Configuration Menu Y ou configure the switch usin g the Configuration Menu. Pr essing <Enter> while in the Configu ration Menu selects the option to choose commands. Ta b l e 3 - 4 Configuration Menu Confi gurati on men u Se e Pa ge Ether net IP Address 3-11 Ether net Subnetmask 3-11 Fibre Channel IP A ...
-
EMC DS-16B - page 36
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management After c hanging any of t he following menus fr om the fron t panel or T elnet connection, you mus t r e boot the switch for the ch anges to ta ke effect. Ether net IP Address Pre ssing <Ent er> whil e Ethernet IP address is selected, dis plays the switch ’ s Et ...
-
EMC DS-16B - page 37
DS-16B Sw itch Menus Swit ch Mana gement The default subnet mask value is none. Refer to the network administrator for the appro priate subnet mask. Enter the switch ’ s subnet address by using <Up> and <Down> to increment or decr ement the displayed valu e. The numbers with the underline cursor is the group to modify . Fibre Channel ...
-
EMC DS-16B - page 38
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Gatew ay Address Pre ssing <Ente r> w hile Gateway add ress is selected, displa ys: The default gatewa y addr ess is shown abo ve. Y ou must enter a va lid gateway address, if required. T o enter the g atew ay address 1. Use <Up> and <Down> to incr em ...
-
EMC DS-16B - page 39
DS-16B Sw itch Menus Swit ch Mana gement R_A_T O V Press ing < Enter> whi le R_A_TOV is selected, displays: Resource Allocation T ime Ou t V alue ( R_A_TOV) is adjustable in 1-second in cr em e nts usin g fr ont panel con tr o ls, but its value is displayed in mil liseconds. This variable works wi th the variable E_D_TOV to determine the s wi ...
-
EMC DS-16B - page 40
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Operating Mode The operating modes are deter m ined by the h ost adapter . The six operating mod es for the switch are: The administrator determines the a d apter in use, then sets the swi tch for the corresponding operating mo de. Virtual Channels The switch pr ov ide ...
-
EMC DS-16B - page 41
DS-16B Sw itch Menus Swit ch Mana gement VC Link Ctl Pre ssing<E nter> whi le VC Link Ctl is selected, displays: The V irtual Cha n nel Lin k Contr ol changes the lin k control channel. There ar e two optio ns: 0 and 1. Option 0 f or ces data receipt acknow ledgments on Class 2 channels to be sent back on the data channel. This traffic co nsu ...
-
EMC DS-16B - page 42
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management channel 6 or 7. V erify that the multi ca st channel has the f rame class priority set to the frame class of the expected tra ffic. VC Prio rities Pre ssing <Ente r> w hile VC Priorities is selected, displays: The numbers displayed show the priorities assigned to ...
-
EMC DS-16B - page 43
DS-16B Sw itch Menus Swit ch Mana gement Selecting the Y es option th en pressing <Enter> causes all values in the Configuratio n Menu to r eset to default conditions. O nce the Ethernet IP address and the Switchname are changed, they are not reset to default values. Resetting the swit ch to d efault ca uses all configurat ion setti ngs, name ...
-
EMC DS-16B - page 44
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Switch Offline The shutdown process is initia ted fr om the front panel by pressing <Enter> while the Switch Offline message is displayed. Y ou can o bserve and veri fy this process by watc hing the front panel LEDs chang e color fr om green t o slow flash ing am ...
-
EMC DS-16B - page 45
DS-16B Sw itch Menus Swit ch Mana gement Por t Ena b le P ressin g <Ent er> w hile the Port Enable message i s displaye d opens a submenu where you select the port. Pressing <Enter> while th e selected port is disp layed, enables the selected port. The LED associated w ith selected port changes fro m amber to green indicating the port h ...
-
EMC DS-16B - page 46
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Status Menu Y ou can retrieve informat ion on the switch using the Status Menu. The menu is inform ational only; you cannot make cha nges to the switch ’ s sta tus from this m enu. Press <Enter> while the Status Menu is selected to select commands. Switch Name ...
-
EMC DS-16B - page 47
DS-16B Sw itch Menus Swit ch Mana gement Wo r l d w i d e N a m e Pre ssing <Ent er> w hile Worldwide Name is selected , displays: The switch ’ s WWN is a uniqu e numeric identifier for each sw itch and it is assigned by the man ufactur er . A numberin g scheme administra ted globally assures that th is WWN is unique. Fi rmw are V ersio n P ...
-
EMC DS-16B - page 48
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Flash Date Pre ssing <E nter> whil e Flash Date is selected, displays: This display gives the date and time for the last f lash firmwar e update. If you upgrade the firmwar e in flash memory with a differ ent firmware version, the date the new firmware w as enter ...
-
EMC DS-16B - page 49
DS-16B Sw itch Menus Swit ch Mana gement position when the ports ar e viewed fr om the switch ’ s f ro nt pa nel. The definitions assig ned to the example are : • E – E_Port is an interswitch expa nsion port, used to connect to a n E_Port of another sw itch to build a lar ger switch Fabric. • F – F_Port, the Fabric access port is used to ...
-
EMC DS-16B - page 50
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Te m p e r a t u r e Pre ssing <Ent er> w hile Temperature is selected, displays: Using th e <Up> or <Dow n> buttons, the user can t oggle betw een Centigrad e (default ) and Fa hrenh eit te mperatur e values. The numbered temperature sensor locations ...
-
EMC DS-16B - page 51
DS-16B Sw itch Menus Swit ch Mana gement Error Log Selecting Error Log , then pr essing <Enter>, displays: The err or log stores the las t 64 erro r types sensed by the switch. The front panel display shows: • Err or number (01 -64) • Date and time of the last occurr ence each err or type was sensed • T otal number of occurr en ces of e ...
-
EMC DS-16B - page 52
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switch Management Licenses Se lecting Licenses , then pr essing <Enter>, displays: The license display sho ws a bit map in hex of the installed license options. The current list of license options is: web=1, zoning=2, SES=4, QuickL oop=8, Fabric=16 Te s t M e n u The tests availab ...
-
EMC DS-16B - page 53
Fr ont P anel D iag nost ics 4 Invisible Body T ag • Front Panel Di agnostics .............. ........... ................. ................. ......... 4-2 • Status and Activity Indicators ............... ................. ........... ............... 4-4 • Front Panel LE D Port Indicators ...................... ............ ................ .. ...
-
EMC DS-16B - page 54
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics Fr ont P anel D iagnostics This sectio n gives a diagnos tic overview and di scusses: • Diagnos tic Overview • Status and Activity Indicators • Dia gnost ic T ests See Appendix C, Err or M essa ges , for the actual error messa ge descri ptions. Diagnostic ...
-
EMC DS-16B - page 55
Fr ont P anel D iag nost ics Front P anel Diagnostics Diagnostic Front Panel Displays If you susp ect a switch or a Fibr e Channe l port failure, a visual check of the color LED In dicators, shown in Figu r e 4- 1, determines the status of each port. See Status and Activity Ind icat ors on p age 4-4 for addit ional informa tion Figure 4-1 LED Indic ...
-
EMC DS-16B - page 56
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics Status and Activity Indicators Fro nt Panel LED P o rt Indi cator s The color and fla sh speed of each port ’ s LED, as described i n T able 4-1, in dicates the individual port ’ s st atu s. Initialization Step s At power-on or reset, the fo llowing steps ar ...
-
EMC DS-16B - page 57
Status and Activi ty Indicato rs Front P anel Diagnostics 7. Address assi gnment; afte r the maste r switch is identifi ed, port address es may be assigned. Each switch tries to keep the same address es that were pr evi ously used. These ar e stored in the switch ’ s conf igurati on flas h PROM . 8. Routing table con struction; after addr esses a ...
-
EMC DS-16B - page 58
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics Diagnostic T ests The following tests ar e available from the switch ’ s fr ont pane l and via T elnet. For details o n how to use the switch ’ s front panel butto ns and how to access the Test Menu from the front panel, r efer to the section Managi ng Throu ...
-
EMC DS-16B - page 59
Diagn ostic T ests Front P anel Diagnostics Switch Offline Pr essing < Enter> whi le Switch Offl ine is selected displays : T ests that would j e opardize data transm ission r equire taking the switch offline. If the switch is not offline, a prompt appears before the test is allowed to proceed. Switch Online Pre ssing <Ent er> w hile Sw ...
-
EMC DS-16B - page 60
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics If the memory tests OK, the fr ont panel displays: Related er ror messages : D IAG-MEMOR Y , DIAG-MEMSZ, DIAG-MEMNULL Port Register T est Pr essing <Ente r> w hile Port Regist er Test is selected displays a reminder to take the switch of fline if it is not ...
-
EMC DS-16B - page 61
Diagn ostic T ests Front P anel Diagnostics Pr essi ng <Enter> while Central Memory Test is selected displays a reminder to take the switch o f f line, if it is not offline. If the messag e i s displayed, take the sw itch of fline. If the switch pass es the test, Passed is displayed: Related er ror messages: DIAG-CMBISTR O, DIAG-CMBIS RF , DI ...
-
EMC DS-16B - page 62
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics Port Loopback T est The portLoopbackT est verifies the intended functional operation of the switch by sending frames from each port ’ s transmitter back to the same port ’ s r eceiver via an int ernal har dware loopback. Pr essi ng <Enter> while Port L ...
-
EMC DS-16B - page 63
Diagn ostic T ests Front P anel Diagnostics All port s on the switch must be connected or else th e switch shows a n erro r condit ion. When runni ng the cross port te st, you must se t the operati ng mode value to 0 or 1. Modes 2 and 3 do n ot send out the E LP used to discover switches. If the ELP is not sent, the sw itch does n ot know the port ...
-
EMC DS-16B - page 64
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Front P anel Diagnostics Related er ror messages: DIAG-INIT , DIAG-POR TDIED, DIAG- XMIT , DIAG-POR TSTOPPED, DIAG- ERRST A T , DIAG- ERRST A TS, DIAG-POR T ABSENT Dis play T est Pre ssing <Ent er> w hile Display Test is selected causes a series of test characters to be displayed. ...
-
EMC DS-16B - page 65
Specifications A Invisible Body T ag • General Specifications ................. ................. ........... ................. ........ A-2 • Fabric Management Specifications .................. ............................ ... A-3 • Safety Specifications ......................... ............ ................. ........... ........ A-4 Specif ...
-
EMC DS-16B - page 66
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Specifications General Speci fi cations T able A-1 shows the sw itch specifications. T able A-1 Switch Specifications Specifications Descriptio n Fibre Channel protocol ANSI Fibre Channel Standard ( F C-PH) F abric Initializ ation Com plies with FC-SW 3.2 IP Over Fibre Channel (FC-IP) C ...
-
EMC DS-16B - page 67
Fabr ic Manage ment Specif ications Specifications F a bric Managem ent Specif ica tions T able A-2 shows Fa bric management specific ations: Ta b l e A - 2 F abric Management Specifications Standard Features Description F abric manage ment Simple Name Ser ver , Alias Ser ver , SNMP , T elnet , W or ld Wide W eb User interface RJ45 front panel c on ...
-
EMC DS-16B - page 68
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Specifications Safety S pecif ications T able A- 3 Sho ws Sa fety spec ificat ions: T able A-3 Safety Specifications Countr y Safety EMC Canada CSA 22.2 No. 950 Third Edition CSA C108.8 Class A United States UL 1950 T hird Edition FCC Part 15 Clas s A Japan EN60950+A1+A2+A3+A4+A11 VCCI ...
-
EMC DS-16B - page 69
Safety Specifications Specifications Optical Po rt Specifications Fibre Channe l interfaces of a DS - 16B swi tch equipped with an optical port interface uses a short wavelen gth (780 to 850 µ m.) or long wavele ngth (127 0 to 1350 µ m) la ser t ransm itte r . The la ser c ompli es with 21 CFR(J) Clas s 1 laser safety r equirements. It uses Non-O ...
-
EMC DS-16B - page 70
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Specifications Dimensions The switch may be configured for either rack m ount or tabletop use. Rack Mount Dimensions 2U, 19-in. rack mount (EIA co mpliant) H: mm (1.71 in. ), W : 428.6 mm (16.88 in.), D: 450.0 mm (17.72 in .) T able T op Dimensions H: mm (1.86 in. ), W : 428.6 mm (16.88 ...
-
EMC DS-16B - page 71
Switch Supp ort B Invisible Body T ag • Switch Support ....................... ........... ................. ............ ................ ... B-2 • Support T ool ..................... ............................. ............................ ........ B-2 Switch Support ...
-
EMC DS-16B - page 72
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Switc h Suppor t Switch Sup por t Support for your switch can be o btained from EMC. Please co ntact EMC to r eport hardwar e or software problems.EMC is also the corr ect source for switch r epairs or for supplying spare components. Support T ool Included in the switch software is a co ...
-
EMC DS-16B - page 73
Err or Messages C Invisible Body T ag • Erro r Message Formats ............... ........... ................. ........... .............. C-2 • Diagnostic Err or Message Formats. ................. ............ ................ ... C-4 • Erro r Message T ables ................... ................. ........... ................. ...... C-10 Err or ...
-
EMC DS-16B - page 74
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages Err or Message Formats Ther e are two err or message formats depending on whether you ar e gathering info rmation from the fr o nt panel or via T elnet. The front panel shows an abbreviated message and via T elnet di splays the entire err or message. In all cases, the las ...
-
EMC DS-16B - page 75
Erro r Message For mats Error Messages T o display error message from the front panel 1. From the front panel, select the Sta tus menu. 2. S elect Er ror Log. 3. Scro ll through the err or log (if no err ors encountered , the panel displays “ No Error ” ). ...
-
EMC DS-16B - page 76
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages Diagnosti c Err or Message Formats If any port f ails during a diagnos tic test, it is marked BAD in the status display . T o r etest a port which has been marked BAD , clear the por t and set to OK usin g the diagClearError (port#) command. Th is command clears the port ...
-
EMC DS-16B - page 77
Diagno stic Err or Message Fo rmats Error Messages Error Mess age Numbers An err or number ERR#xxxx a ppears at the end of an err or message. T able C-2 matches each error number with the test that caused the erro r and the name of the err o r . Look up the complete definition of the error name and the actions that will correct it in T able C-3. Ta ...
-
EMC DS-16B - page 78
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages 1020 centralMemor yT est DIAG-CMBISRT O 1021 DIAG-CMBISRF 1025 DIAG-LCMRS 1026 DIAG-LCMTO 1027 DIAG-LCMEM 1028 DIAG-LCMEMTX 1029 DIAG-CMNOBUF 102A DIAG-CMERR TYPE 102B DIAG-CMERRPTN 102C DIAG-INTNOTCLR 103O DIAG-BADINT 106F DIAG-TIMEOUT 2030 cmiT est DIAG-BADINT 2031 DIAG ...
-
EMC DS-16B - page 79
Diagno stic Err or Message Fo rmats Error Messages 2640 por tLoopbackT est DIAG-ERRST A T (ENCIN) 2641 DIAG-ERRST A T (CRC) 2642 DIAG-ERRST A T (TRUNC) 2643 DIAG-ERRST A T (2LONG) 2644 DIAG- ERRST A T (BADEOF) 2645 DIA G-ERRST A T (EN COUT) 2646 DIAG- ERRST A T (BADORD) 2647 DIAG-ERRST A T (DISCC3) 264F DIAG-INIT 265F DIAG-POR T_DIED 266E DIAG-D A ...
-
EMC DS-16B - page 80
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages 3040 crossPortT est DIAG-ERRST A T(ENCIN) 3041 DIAG-ERRST A T(CRL) 3042 DIAG-ERRST A T(TRUNC) 3043 DIAG-ERRST A T(2LONG) 3044 DIAG-ERRST A T(BADEOF) 3045 DIAG-ERRST A TENCOUT) 3046 DIAG-ERRST A T(BADORD) 3047 DIAG-ERRST A T(DISC3) 304F DIAG-INIT 305F DIAG-POR T DIED 3060 ...
-
EMC DS-16B - page 81
Diagno stic Err or Message Fo rmats Error Messages 384F spinSilk DIAG-INIT 385F DIAG-POR T D IED 3840 DIA G-ERRST A T (EN CIN) 3841 DIAG-ERRST A T (CRC) 3842 DIAG-ERRST A T (TRUNC) 3843 DIAG-ERRST A T (2LONG) 3844 DIAG- ERRST A T (BADEOF) 3845 DIA G-ERRST A T (EN COUT) 3846 DIAG- ERRST A T (BADORD) 3847 DIAG-ERRST A T (DISCC3) 3870 DIAG-POR T ABSEN ...
-
EMC DS-16B - page 82
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages Err or Message T ables T able C-3 Diagno stic Error Messa ges Message Description Probable Cause Action DIA G-BADINT Err#1030, 2030 [centralMemor yT est, cmiT est] P or t received an interrupt when not expecting one ASI C f ail ure Replac e mainboard assemb ly DIAG-BUS_TI ...
-
EMC DS-16B - page 83
Error Mes sage T a bles Error Messages DIAG-CMICKSUM Err#2036 [cmiT est] CMI message r eceiv ed failed bad checks um test. ASIC or mainboar d fai lure Replace mainboard assemb ly DIAG-CMIDA T A Err#2035 [cmiT est] CMI data rec eiv ed di d not match data transmitted ASIC or mainboar d fai lure Replace mainboard assemb ly DIAG-CMIINVCAP Err#2034 [cmi ...
-
EMC DS-16B - page 84
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages DIAG-ERRST A T Err#2640-2647 , 3040-3047, 3840-3847 [por tLoopbackT est, crossP or tT est, spinS ilk] P or t Error Statistics counter i s non-zero, meaning an er ror was detected when receiving frames. One of the following status err ors occurred. Enc_in – Encoding err ...
-
EMC DS-16B - page 85
Error Mes sage T a bles Error Messages DIAG-LCMTO Err#1F26, 10 26 [centralMemor yT est, cmemRetentionT e s t] Central Memo ry Timeout: Data tra nsf er initiated di d not complete within the timeout per iod. ASIC failure Repl ac e mainboard assemb ly DIAG-MEMNULL Err#0112 [ramT est] T est failed to malloc. mainboard f ailu re Replace mainboard assem ...
-
EMC DS-16B - page 86
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages DIAG-REGERR_ UNRST Err#0B16, 0416 [por tRegT est, sramRetentionT est] P or t failed to unreset. ASIC f ai l ure Replace mainboard assemb ly DIAG-ST A TS Err#2660-2662 , 3060 - 3062 [por tLoopback T est, crossPortT est] P or t counter value did not match t he number of fra ...
-
EMC DS-16B - page 87
Error Mes sage T a bles Error Messages F ABR IC , NO _ALIASID , LOG_WARNING No free multicast alia s T oo many multicast groups in use Remove some of the groups. F ABR IC , BADILS, LOG_W ARNING Bad ISL-ELS size The ISL-ELS payload is wrong. Contact custom er suppor t FLASH, BAD_MIRROR, LOG_WARNING The system ’ s flash memor y has encountered an e ...
-
EMC DS-16B - page 88
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages FCIU , IUCOUNT , L, S T otal number of IUs Count < 0 OS error Contact custome r support FCPH, EXCHBAD , L, S Bad exchange OS e r ror Contact customer suppor t FCPH, EXCHFREE, L, S Unable to free an e x c hange OS error Contact custome r support MQ, QWRITE, L, M Message ...
-
EMC DS-16B - page 89
Error Mes sage T a bles Error Messages SYS, BADPTR, LOG_ERROR Bad system poi nter OS error Contact custom er support SYS, INTRPT , LOG_CRITICAL Bad system interrupt OS error Con tac t customer s upport SYS, FLASHRD , LOG_ERROR FLASH memor y read error OS error Contact customer s upport SYS, FLASHWR, LOG_ERROR FLASH memory wri te error OS error Cont ...
-
EMC DS-16B - page 90
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Error Messages FSPF , REMDOMAIN , LOG_ERR O R R emote Domain ID out of range OS error Conta ct customer suppor t. NBFSM, NGBRST A TE, LOG_ERROR Wrong inpu t to neighbor FSM OS err or Conta c t customer s upport. MCAST , ADDPORT , LOG_ W ARNING Add por t failed OS error Conta c t custome ...
-
EMC DS-16B - page 91
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Sales and Ser vice Loca tions Corporate Headquarters EMC Corporation Hopkinto n, Massachuse tts 01748-91 03 U.S.A. 508-435- 1000 1-800- 424-EMC2 Asia Pac ific Headquarters EMC Japan K.K. P. O . B o x 3 2 3 Shinju ku-Mitsui Bldg., 55 1-1, Nis hi-Shinjuku 2-chome S hinjuku -ku T o k yo 163 ...
-
EMC DS-16B - page 92
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Sales and Serv ice L ocations Houston, TX 713-621- 9800 Indiana polis, IN 31 7-577-976 6 Inglewood, CA 310-364-1 222 Irvine , CA 714-833 -1442 Lenexa, KS 913-4 69-929 2 Long Is land, NY 516-393-5045 Minneapol is, MN 61 2-835- 1994 Montr eal, Quebec 514-856-61 66 Nashville, TN 61 5-781-4 ...
-
EMC DS-16B - page 93
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Sales and Ser vice Locations L yon, France (33) 7 860 1 330 Marse ille, Fran ce (33) 429 2 2549 Melbou rne, Austra lia (61) 3 653 9519 Milan, Italy ( 3 9) 02 409 081 Munich, Ge rmany (49) 89 14 31 320 Nagoya , Japan (81) 52 22 3 1900 Newton Le W illows, Me rseyside, UK (44) 1942 275 51 1 ...
-
EMC DS-16B - page 94
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Sales and Serv ice L ocations ...
-
EMC DS-16B - page 95
Depar tmental Sw itch Model DS -16B Hardware Reference Manual B Bad EOF C-12 BadO r dSet C- 12 BB_cr edit 3-1 2 boot failur e 4-5 boot pr om date 3-22 booted at 3-21 buttons down 3- 3 enter 3-3 tab/esc 3- 3 up 3-3 C Central Memory T est command 4-9 commands Central Memory Tes t 4-9 Display Tes t 4-12 Memory Test 4-7 Port Loopback Test 4-10 Port Reg ...
-
EMC DS-16B - page 96
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Index E E_D_TO V 3-13 Enc_in C-12 Enc_out C-12 enter butt on 3-3 error log 3-25 ethernet co nnections 2-5 ethe rnet IP address 3-10 ethernet subnetmask 3-10 F features 1-2 fiber optic cab le conne ctions 2-4 fibr e channel IP addre ss 3-11 fibre channel pr otocol A-2 fibr e chan nel sub ...
-
EMC DS-16B - page 97
Depar tmental Sw itch Model DS -16B Hardware Reference Manual Inde x status menu 3-20 boot prom dat e 3-22 boot e d at 3-21 curre nt date 3-2 1 error log 3-25 firmware d ate 3-2 1 firmw are versi on 3-21 flash d ate 3- 22 module type 3-23 port status 3-22 port throughpu t 3-23 switch na me 3-2 0 temperature 3-24 worl dwide name 3- 21 switch na me 3 ...
-
EMC DS-16B - page 98
Depar tmental Switc h Model DS-16 B Hardware Reference Manua l Index ...
Do you have a question concerning EMC DS-16B?
Use the form below
If you did not solve your problem by using a manual EMC DS-16B, ask a question using the form below. If a user had a similar problem with EMC DS-16B it is likely that he will want to share the way to solve it.