English dropdown-ico

Manual EMC DS-32B2

574 pages 2.88 mb
Download

Go to site of 574

Summary
  • EMC DS-32B2 - page 1

    EMC Corporation 171 South Stree t Hopkinto n, MA 01748- 9103 Cor porate Headquarter s : (508) 435-1000 , (800) 424-EMC2 Fa x : (508) 435- 5374 Ser vice : (800) SVC -4EMC EMC Connectrix Departmental Switch DS-32B2 and Enterprise Dire ctor ED-12 000B Fabric OS Version 4.0.2 REFERENCE MANUAL P/N 300-00 0-637 REV A02 ...

  • EMC DS-32B2 - page 2

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual ii Copyright © 2000 - 2002 EMC Corporation. All rights re served. Printe d Novemb er, 2002 EMC bel ieves the information in this pu blication is accu rate as of its public ation dat e. The infor mation is subje ct to chan ge witho ut not ice. THE INFORMATION IN THIS PUBLICATION IS ...

  • EMC DS-32B2 - page 3

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual iii This equipmen t generates, us es, and may emit ra dio frequency energy. The equipm ent has be en type tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules, which are designed to pro vide reasonable pro tection against such rad ...

  • EMC DS-32B2 - page 4

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual iv ...

  • EMC DS-32B2 - page 5

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual v Preface ........................ ........... ................. ........... ................. ........... ............ ................ ... xiii Chapter 1 T elnet Co mmands agtcfgDefault . ................. ............ ................. ........... ................. ......... 1-8 ...

  • EMC DS-32B2 - page 6

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual vi Contents cfgEnable ........... ................. ........... ................. ........... ................. ..... 1-60 cfgRemove .. ................. ........... ................. ............ ................. .......... 1-61 cfgSave......... ................. ........... ..... ...

  • EMC DS-32B2 - page 7

    vii EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual Conte nts fabricShow ............ ........... ................. ............ ................. ........... .... 1 -144 fabStatsShow ................... ................. ............ ................. ........... .... 1 -146 fanDisable ....... ................. ............ .... ...

  • EMC DS-32B2 - page 8

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual viii Contents iodShow . ................ ............ ................. ........... ................. ........... ... 1-220 ipAddrSet ............... ............ ................. ........... ................. ........... ... 1-221 ipAddrShow ........................... ........... ...

  • EMC DS-32B2 - page 9

    ix EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual Conte nts perfCfgSave ..................... ................. ............ ........... ................. .... 1 -292 perfClrAlpaCr c .......... ................. ........... ................. ........... .......... 1-293 perfDelEEMonitor ...................... ........... ....... ...

  • EMC DS-32B2 - page 10

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual x Contents qloopRemove.... ........... ................. ........... ................. ............ ........ 1-381 qloopShow ................... ................. ........... ................. ............ ........ 1-383 ramT est ................... ................. ............ .. ...

  • EMC DS-32B2 - page 11

    xi EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual Conte nts syslogdIpShow ........................... ........... ........... ................. .......... 1-455 systemtest ....... ................. ............ ................. ........... ................. .... 1-456 tempShow............. ................. ........... ........ ...

  • EMC DS-32B2 - page 12

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual xii Contents Chapter 5 Cont ro l Pr oces sor Co mmands Active CP Commands ....................... ........... ................. ........... ....... 5-2 Standby CP Commands .................... ................. ........... ................. . 5-3 Appendix A Customer S upport Overvie ...

  • EMC DS-32B2 - page 13

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual xiii Preface As part o f its effo rt to continu ousl y improve and e nhan ce the pe rforman ce and capabilities of the EMC product line, EMC period ically releases new versio ns of the E MC Con nectri x Depart mental Switch DS-32B 2 and Enterprise Director ED-12000B Fabr ic OS. Ther ...

  • EMC DS-32B2 - page 14

    xiv EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Ma nual Preface Chapter 3, Fabric OS V ersion Co mparison , summarizes the commands avail abl e in v3.0 and v4.0 . Chapter 4, Fabric and Switch Man agement , explains the differ ent method s used to ma nage a SA N for DS-32B2 an d ED-1200 0B switches . Chapter 5, Control Pr ocessor Com ...

  • EMC DS-32B2 - page 15

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual xv Preface Conv entions Used in this Guide EMC uses the following conventions for notes, cautions, warnings, and danger n otices. A no te pr esent s inf ormat ion th at is im portan t, b ut not haza rd -re lated. CAUTION ! A caution contains informati on essential to avoid data loss ...

  • EMC DS-32B2 - page 16

    xvi EMC Connectrix D S-32B2 and ED-12000B Fabric O S Ref erence Ma nual Preface Where to Get Help Obtain technica l support by callin g your local sales o ffice. For service, call: and as k for Custo mer S uppo rt. If you ar e located outside the USA, call the near est EMC off ice for technical assistance. Sales and Customer Ser v ice Contacts For ...

  • EMC DS-32B2 - page 17

    Te l n e t C o m ma n d s 1-1 1 Invisible Body T ag This chapter desc ribes the followin g commands : ◆ agtcfgDefault ......... ........... ................. ............ ................. ........... ......... 1-8 ◆ agtcfgSet ...... ................. ........... ................. ........... ................. ........... .. 1- 1 1 ◆ agtcfgSh ...

  • EMC DS-32B2 - page 18

    1 1-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual T elnet Commands ◆ cfgRemove ........ ........... ................. ............ ................. ........... ............ 1-61 ◆ cfgSave ............... ................. ........... ................. ............ ................ ....... 1-63 ◆ cfgShow ....... ....... ...

  • EMC DS-32B2 - page 19

    1 1-3 T elnet Com mands ◆ fabStatsShow ... ................. ............ ................. ........... ........... ........... 1- 146 ◆ fanDisable ........ ................. ............ ........... ................. ........... ........... 1- 147 ◆ fanEnable ..................... ........... ................. ........... ................. . ...

  • EMC DS-32B2 - page 20

    1 1-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual T elnet Commands ◆ ipAddrSet ..................... ............ ................. ........... ................. .......... 1-221 ◆ ipAddrShow ........... ........... ................. ........... ................. ........... ..... 1-224 ◆ islShow ........ ............ . ...

  • EMC DS-32B2 - page 21

    1 1-5 T elnet Com mands ◆ perfClrAlpaCr c ............................ ........... ................. ........... ........... 1-29 3 ◆ perfDelEEMonitor ....................... ........... ................. ........... ........... 1-29 5 ◆ perfDelFilterMonitor ................... ................. ........... ................. ..... 1-297 ◆ p ...

  • EMC DS-32B2 - page 22

    1 1-6 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual T elnet Commands ◆ qloopShow .. ................. ............ ................. ........... ................. .......... 1-383 ◆ ramT est .................... ................. ........... ................. ........... ................ 1-385 ◆ reboo t ................. ...

  • EMC DS-32B2 - page 23

    1 1-7 T elnet Com mands ◆ timeOut .................. ........... ................. ............ ................. ........... ..... 1-459 ◆ topologyShow ............. ................. ........... ................. ........... ........... 1-460 ◆ trackChangesSet.......... ........... ................. ........... ................. ........... ...

  • EMC DS-32B2 - page 24

    1 1-8 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual T elnet Commands agtcfgDef ault Reset the SNMP ag ent configuration to default value. Syntax agtcfgDefault A v ailability Admin Descr iption Use this com mand to reset the configuration of the SNM P agent to default values. Ther e is one agent per logical swit ch. This c omman ...

  • EMC DS-32B2 - page 25

    1 agtc fgDef a ult 1- 9 T elnet Com mands There are s ix communities and respective trap r ecipients supported by the agent. The first three communities are for r ead-write access (rw) and the last three are for r ead-only access (ro). Note that the factory default value for the trap re cipient of each community is "0.0.0.0". The factory ...

  • EMC DS-32B2 - page 26

    1 1-10 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o set the SNMP agent conf iguration parameters to the default v alues , and verify the def ault va lues are set: sw5:admin> agtcfgDefault ***** This command will reset the agent’s co nfiguration back to factory default ***** Current SNMP Agent ...

  • EMC DS-32B2 - page 27

    1 agtcfgSet 1-11 T elnet Com mands agtcfgSet Modify t he SNMP ag ent confi guratio n. Syntax agtcfgSet A v ailability Admin Descr iption Use this co mmand to mo dify the configura tion of the SNM P agent in the switch. Set the valu es for the following items. Ther e is one agent per logical swit ch. This c ommand is specific to t he logical switch ...

  • EMC DS-32B2 - page 28

    1 1-12 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands There are s ix communities and respective trap r ecipients supported by the agent. The first thr ee communities are fo r read-w rite access (rw) and the last three are for r ead-only access (ro). Note that the factory default value for the trap re cipient of ...

  • EMC DS-32B2 - page 29

    1 agtcfgSet 1-13 T elnet Com mands sysDescr: [FC Switch] sysLocation: [End User Premise] sysContact: [Field Support] swEventTrapLevel: (0..5) [0] 3 authTrapsEnabled (true, t, false, f ): [false] t SNMP community and trap recipient conf iguration: Community (rw): [Secret C0de] Trap Recipient’s IP address in dot notation: [192.168.1.51] Community ( ...

  • EMC DS-32B2 - page 30

    1 1-14 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands No trap recipient configured yet Community 3: private (rw) No trap recipient configured yet Community 4: public (ro) No trap recipient configured yet Community 5: common (ro) No trap recipient configured yet Community 6: FibreChannel (ro) No trap recipient co ...

  • EMC DS-32B2 - page 31

    1 agtcfgShow 1-15 T elnet Com mands agtcfgSho w Display th e SNMP agent configurat ion. Syntax agtcfgShow A v ailability All users Descr iption Use this com mand to display the conf iguration of the SNMP agen t in the switch. The followi ng inform ation is displayed: Ther e is one agent per logical swit ch. This c ommand is specific to t he logical ...

  • EMC DS-32B2 - page 32

    1 1-16 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands The factory default value for the trap r ecipient of each community is "0.0.0.0". The factory default values for the community strings ar e: Community 1: Secret Code Community 2: OrigEquipMfr Community 3: private Community 4: public Community 5: com ...

  • EMC DS-32B2 - page 33

    1 agtcfgShow 1-17 T elnet Com mands Community 5: common (ro) No trap recipient configured yet Community 6: FibreChannel (ro) No trap recipient configured yet SNMP access list configuration: Entry 0: Access host subnet area 192. 168.64.0 (rw)] Entry 1: Access host subnet area 192.1 68.1.26 (rw) Entry 2: No access host configured ye t Entry 3: No acc ...

  • EMC DS-32B2 - page 34

    1 1-18 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands aliasDelete Delete a port from all local groups. Syntax aliasDelete portID A v ailability Admin Descr iption Use th is co mman d to delete a local p ort f ro m al l loc al gr ou ps. The group is deleted if it becomes empty a fter deleting the local port. Use ...

  • EMC DS-32B2 - page 35

    1 alia sJoin 1-19 T elnet Com mands aliasJoin Create o r add a member to a gr oup of N_Ports. Syntax aliasJoin A v ailability Admin Descr iption Use this command to cr eate an alias group of N_Ports or to add N_Ports to a n existing group. Any on line N_Port def ined in the fabric can be p art of a group . A n N_ Por t can be add ed from an y sw it ...

  • EMC DS-32B2 - page 36

    1 1-20 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands See Als o aliasShow aliasDelete aliasPurge ...

  • EMC DS-32B2 - page 37

    1 aliasP urge 1-21 T elnet Com mands aliasPurge Remove an alias group. Syntax aliasPurge groupID A v ailability Admin Descr iption Use this command t o remove an alias group. The alias group must be identified by its hexadecim al value. Operands This command has the f ollowing operand: Example T o remov e an alias gr oup: sw5:admin> aliasPurge 0 ...

  • EMC DS-32B2 - page 38

    1 1-22 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands aliasSho w Display alia s server informa tion. Syntax aliasShow A v ailability All users Descr iption Use this co mmand to display l ocal alias server inf ormation. I f there is no local alia s group, the following mes sage is displaye d: There is no entry in ...

  • EMC DS-32B2 - page 39

    1 aliasShow 1-23 T elnet Com mands Example T o display the entries in the local alias ser ver: switch:admin> aliasShow Alias ID Creator Token [rb, type, grptype, qlfr] Member List fffb01 fffffd [00, 05, 10, 10000060 69 800228] { 019c00 } The Local Alias Server has 1 entry switch:admin> Exit Sta tus 0 Indicates successful operation. Non Zero I ...

  • EMC DS-32B2 - page 40

    1 1-24 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands aliAdd Add a me mber to a zone alia s. Syntax aliAdd aliName, member; member A v ailability Admin Descr iption Use this command to add o ne or more m embers to an existing zone alias. The alias me mber list cannot co ntain an other zon e alias . This comm and ...

  • EMC DS-32B2 - page 41

    1 aliCrea te 1-25 T elnet Com mands aliCreate Cr eate a zo ne alia s. Syntax aliCreate aliName, member; member A v ailability Admin Descr iption Use this command to cr eate a new zone alias. The zone alias member list must have a t least one member (empty lists are not a llowed). The alias member list cannot contain another zone alia s. Zone Alias ...

  • EMC DS-32B2 - page 42

    1 1-26 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o add zone aliases usin g member names: switch:admin> aliCreate "array1", "32; 33; 34" switch:admin> aliCreate "array2", "21: 00:00:20:37:0c:66:23" switch:admin> aliCreate "loop1", "0x0 ...

  • EMC DS-32B2 - page 43

    1 aliDelete 1-27 T elnet Com mands aliDelete Delete a zone alia s. Syntax aliDelete aliName A v ailability Admin Descr iption Use this command to delete a zone alias. This command changes the defined configuration. For the change to become effective, an appr opriate zone configuration m ust be enabled using the cfgEnable command. For the change to ...

  • EMC DS-32B2 - page 44

    1 1-28 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands aliRemov e Remove a member fr om a zone alias. Syntax aliRemove aliName, member; member A v ailability Admin Descr iption Use this command to r emove one or mor e members fr om an existing zone alias. If all members ar e removed, the zone alias is deleted. Th ...

  • EMC DS-32B2 - page 45

    1 aliRem ov e 1-29 T elnet Com mands Example T o remov e a member fr om array1: switch:admin> aliRemove "array1", "3,5 " switch:admin> aliRemove "array1", "21: 00:00:20:37:0c:76:8c" switch:admin> aliRemove "array1", "0xE F" See Al so aliAdd aliCreate aliDelete aliShow ...

  • EMC DS-32B2 - page 46

    1 1-30 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands aliShow Display z one alias in formation. Syntax aliShow " pattern" A v ailability All users Descr iption Use this com mand to displa y zone config uration inform ation. If no parameters are specified, all zo ne configura tion informatio n (both d e ...

  • EMC DS-32B2 - page 47

    1 aliShow 1-31 T elnet Com mands Example T o show all zone aliases beginning with arr: switch:admin> aliShow "arr*" alias: array1 21:00:00:20:37:0c:76:8c alias: array2 21:00:00:20:37:0c:66:23 See Al so aliAdd aliCreate aliDelete aliRemove ...

  • EMC DS-32B2 - page 48

    1 1-32 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands back planetest Run Backplane connection test f or multiple blade configur ed system. Syntax backplanetest [-passcnt count ][-payload bytes ][-pat type ] [-ports list ][-verbose boolean ] A v ailability Admin Descr iption Use this command to verify the functio ...

  • EMC DS-32B2 - page 49

    1 bac kpl an ete st 1-33 T elnet Com mands -pat type Specify the test pattern type used in the test frame payload. The default test is 17(jCRP A T). The followin g test patterns can be s pecif ied: • 1 byte fill • 2 word fill • 3 quad fill • 4 byte not • 5 wor d not • 6 quad no t • 7 byte ramp • 8 wor d ramp • 9 quad ramp • 10 b ...

  • EMC DS-32B2 - page 50

    1 1-34 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o run a backplane connection t est: switch:admin> backplanetest -ports 2/1 6 2/18 2/20 -payload 2048 -verbo se 1 Running Backplane Conn Test ..... Test frame info for Backplane Connecti on Test: # of frames: 1 sid data: 0xfffffd did data: 0xfffff ...

  • EMC DS-32B2 - page 51

    1 backP or t 1-35 T elnet Com mands back P ort Run test f or back-e nd mini switch-t o-min iswitch li nks. Syntax backport [-nframes num ][-ports list ][- lb_mode mode ][-fr_type type ] [-extonly enable ] A v ailability Admin Descr iption Use this comma nd to test the backplan e routing and VC allocation. This test applies to single blade as we ll ...

  • EMC DS-32B2 - page 52

    1 1-36 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands -lb_mode mode Specify the loopback mode fo r source and destina tion st andard meanin gs. The defau lt mode is 5. The valid modes ar e: • 0 cable loopback • 1 plug loopback • 2 external loo pback (SERDES) • 5 inte rnal loopback (ASIC) -fr_type type Sp ...

  • EMC DS-32B2 - page 53

    1 backP or t 1-37 T elnet Com mands Example T o test for bac k-end miniswitch to miniswitch links: switch:admin> backport Running Backport Test ..... switch:admin> Diagnostics When the command detects failure(s), the test may report one or more o f the following error messages: 0x3a INIT 0x28 ERR_STAT 0x29 XMIT 0x2c PORT_DIED 0x2e PORT_STOPPE ...

  • EMC DS-32B2 - page 54

    1 1-38 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands bcastsho w Display broadcast routing informat ion. Syntax bcastShow A v ailability All users Descr iption Use this com mand to displa y the broadcast routing informa tion for all ports in the s witch. The broadcast routing information indicates a ll ports tha ...

  • EMC DS-32B2 - page 55

    1 bcas tsh o w 1-39 T elnet Com mands See Al so mcastShow portRouteShow ...

  • EMC DS-32B2 - page 56

    1 1-40 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands bladeBeacon Set blad e beac oning mod e on or off. Syntax bladeBeacon [ blade] mode A v ailability Admin Descr iption Use this co mmand to set t he blade beaconing mode on or o ff. Specify mode 1 to en able beacon ing mode, o r specify mode 0 to d isable beac ...

  • EMC DS-32B2 - page 57

    1 bladeBeacon 1-41 T elnet Com mands Example T o turn t he blade in slot 2 beaconing mode O n and then Off: switch:admin> bladeBeacon 2 1 See Al so switchShow ...

  • EMC DS-32B2 - page 58

    1 1-42 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands bladeDiag Run dia gnosti cs on a sw itch blade. Syntax bladediag [[-slot] slot ] A v ailability Admin Descr iption Use this comma nd to run a suite of diagnostics tests on the specified switch blad e. T o run this co mmand you must inst all loop back plugs on ...

  • EMC DS-32B2 - page 59

    1 bladeDiag 1-43 T elnet Com mands Example T o r un a suite of diagnostics on blade 7: switch:admin> bladediag -slot 7 Testing slot: 7, user ports: 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 PortRegTest Running Port Register Test .... passed. Test Complete: "portregtest" Pass 1 of 1 Duration 0 hr, 2 min & 23 sec (0:2:23: 443). passed. T ...

  • EMC DS-32B2 - page 60

    1 1-44 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands bladeDiagShort Run dia gnosti cs on a sw itch blade. Syntax bladediagshort [[-slot] slot ] A v ailability Admin Descr iption Use this comma nd to run a suite of diagnostics tests on the specified switch blad e. T o run this co mmand you must inst all loop bac ...

  • EMC DS-32B2 - page 61

    1 bladeDia gShor t 1-45 T elnet Com mands Example T o r un a suite of diagnostics on blade 7: switch:admin> bladediagshort -slot 7 Testing slot: 7, user ports: 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 PortRegTest Running Port Register Test .... passed. Test Complete: "portregtest" Pass 1 of 1 Duration 0 hr, 2 min & 23 sec (0:2:23: 443 ...

  • EMC DS-32B2 - page 62

    1 1-46 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands bladePr opSho w Display blad e property . Syntax bladePropShow [[-slot] slot ] A v ailability All users Descr iption Use this command to display the pr operties of a blade. Operands This command has the f ollowing operand: Example T o display the blade pr ope ...

  • EMC DS-32B2 - page 63

    1 camT est 1-47 T elnet Com mands camT e st T o test the function ality of Cont ent Addressable Memory (CAM) . Syntax camtest [-passcnt count ][-txport list ] A v ailability Admin Descr iption Use this command to verify that Con tent Addressable Memory (CAM) is func tionally correct. The CAM is used by Qu ickLoop to translate the SID. When a CAM is ...

  • EMC DS-32B2 - page 64

    1 1-48 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o v erify that Content Addressable Memor y (C AM) is functioning correctly: switch:admin> camTest Running CAM Test .............. Test Completed: "camtest" Pass 1 of 1. Duration 0 hr, 0 min & 58 sec (0:0:58: 796) passed. Error s Bel ...

  • EMC DS-32B2 - page 65

    1 centralMemoryT est 1-49 T elnet Com mands central Memor yT est Perform a bit write/read test of the ASIC central me mory . Syntax centralMemoryTest [ passCount, dataType , dataSeed ] A v ailability Admin Descr iption Use this command to verify the addr ess and da ta bus of the AS IC SRAMs that serve as the central memory . This command may not b ...

  • EMC DS-32B2 - page 66

    1 1-50 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Subtest 3 is not available on 2 G based swi tches. The test method is as follows: 1. Fill the Cent ral Memo ry of all ASI Cs with un ique frames. 2. Set up the har dware such that each ASIC is read by all of the MAX number of po rts in the switch. Data r ecei ...

  • EMC DS-32B2 - page 67

    1 centralMemoryT est 1-51 T elnet Com mands Subtest 5 The forced bad buf fer number erro r subtest verifies that the bad buffer n umber in the data packet can be detected, its err or flag and interrupt bits are set. The test method is as follows: 1. Clear the err or and interrupt bits of all ASICs. 2. Set up the hardware so th at tran smissi on of ...

  • EMC DS-32B2 - page 68

    1 1-52 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands c. Check that all A SIC Y has its: – interrupt bits are set. – err or type is ch ip numb er err or . – the port number in err or is the re ceiver port (which is the base port of asic Y) . d. Reading the error register clears the CMEM interrupt bit; read ...

  • EMC DS-32B2 - page 69

    1 centralMemoryT est 1-53 T elnet Com mands Diagnostics When this command detects failure( s), each subtest may re port one or more of the following error messages: Subtest 2 0x20 LCM EM_ERR 0x22 LCM RS_ERR 0x23 LCM TO_ERR Subtest 3 0x2c CM_ NO_BUF 0x24 LCM TO_ERR 0x22 LCM RS_ERR 0x21 LCM EMTX_ERR Subtest 4 0x2e TIMEO UT 0x26 BA D_INT 0x28 CM_ ERR_ ...

  • EMC DS-32B2 - page 70

    1 1-54 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgAdd Add a member to a zo ne confi guration. Syntax cfgAdd " cfgName", "member; member" A v ailability Admin Descr iption Use this command to add o ne or more m embers to an existing zone configuration. This comm and changes the De fined ...

  • EMC DS-32B2 - page 71

    1 cfgClear 1-55 T elnet Com mands cfgClear Clear all zone co nfig urati ons. Syntax cfgClear A v ailability Admin Descr iption This command clears all zone information in the transaction buffer . All defined zone objects in the tran saction buffer ar e deleted. If you attempt to commit the empty transactio n buffer while a zone configuratio n is en ...

  • EMC DS-32B2 - page 72

    1 1-56 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgC reate Create a z one co nfig uration . Syntax cfgCreate " cfgName", "member; member" A v ailability Admin Descr iption Use this command to cr eate a new zone conf iguration. A zone con figurat ion nam e must begin w ith a lette r and ...

  • EMC DS-32B2 - page 73

    1 cfgCr eate 1-57 T elnet Com mands Example T o create a configuration containing three zones: switch:admin> cfgCreate "Test_cfg", "r edzone; bluezone; greenzone" See Al so cfgAdd cfgClear cfgDelete cfgDisable cfgEnable cfgRemove cfgSave cfgShow ...

  • EMC DS-32B2 - page 74

    1 1-58 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgD elete Delete a zone conf iguration. Syntax cfgDelete cfgName A v ailability Admin Descr iption Use this command to delete a z one configuration. This command changes the defined configuration. For the change to become effective, an appr opriate zone conf ...

  • EMC DS-32B2 - page 75

    1 cfgD isab le 1-59 T elnet Com mands cfgDisable Disables an ef fective zone configuration. Syntax cfgDisable A v ailability Admin Descr iption Use this command to disable the curr ent zone configuration. The fabric returns to nonzonin g mode where all devices se e each other . It also commits the zone configuration in the transaction buffer to vol ...

  • EMC DS-32B2 - page 76

    1 1-60 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgEnable Enables a zo ne configuratio n. Syntax cfgEnable cfgName A v ailability Admin Descr iption This comma nd commits th e zone configura tion in the transa ction buffer to the volatile and nonvolatil e memory and enables th e specified zone co nfigurat ...

  • EMC DS-32B2 - page 77

    1 cfgRe move 1-61 T elnet Com mands cfgR emov e Remove a member fr o m a zone configuration. Syntax cfgRemove " cfgName", "member; member" A v ailability Admin Descr iption Use this command to r emove a member fr om an existing zone configuration. The member list is located by an exact string match, ther efore, it is important t ...

  • EMC DS-32B2 - page 78

    1 1-62 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o remo ve a zone from a conf iguration: switch:admin> cfgRemove "Test_cfg", "r edzone" See Als o cfgAdd cfgClear cfgCreate cfgDelete cfgDisable cfgEnable cfgSave cfgShow cfgTransAbort ...

  • EMC DS-32B2 - page 79

    1 cfgSa v e 1-63 T elnet Com mands cfgS a ve Save zon e configu ration to f lash me mory . Syntax cfgSave A v ailability Admin Descr iption Use this command to save the curr ent zone configuration. The defined conf iguration and the name of the enabled co nfiguration ar e written to flash memory in all swi tches in the fab ric. The saved configura ...

  • EMC DS-32B2 - page 80

    1 1-64 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgS how Display z one configu ration inf ormation . Syntax cfgShow [" pattern"[, transflag ] A v ailability All users Descr iption Use this com mand to displa y zone config uration inform ation. If no operand is specified, all zo ne configuratio n ...

  • EMC DS-32B2 - page 81

    1 cfgSho w 1-65 T elnet Com mands Operands This command has the f ollowing operands: Example T o show all zone conf iguration information: switch:admin> cfgShow Defined configuration: cfg: USA1 Blue_zone cfg: USA_cfg Red_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 alias: array1 21:00:00:20:37:0c:76: 8c; 21: ...

  • EMC DS-32B2 - page 82

    1 1-66 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands T o show only configuration na mes: switch:admin> cfgShow "*" cfg: Test1bluezone cfg: Test_cfgredzone; blue_zone See Als o cfgAdd cfgClear cfgCreate cfgDelete cfgDisable cfgEnable cfgRemove cfgSave ...

  • EMC DS-32B2 - page 83

    1 cfgT r ansAbo rt 1-67 T elnet Com mands cfgT ransAb or t Abort the current zoning transa ction. Syntax cfgTransAbort A v ailability Admin Descr iption Use this comma nd to abort the current zoning transaction without committing it. A ll changes ma de since the transa ction was started are removed a nd the zone configuration database r estor ed to ...

  • EMC DS-32B2 - page 84

    1 1-68 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cfgTransSh o w Print informa tion about th e current transaction . Syntax cfgTransShow A v ailability Admin Descr iption Use this com mand to show the ID of the current transaction. It w ill indicate whether or not the transaction is abo rtable. The transacti ...

  • EMC DS-32B2 - page 85

    1 chassis Name 1-69 T elnet Com mands chassisN ame Display or set th e chassi s name for a n ED-120 00B. Syntax chassisName [ name ] A v ailability Admin ( set) All users (displa y) Descr iption Use this comma nd to change the name associat ed with the chassis ED-12000B. In the ED-12000B, ther e are two logical switches associat ed with a single ch ...

  • EMC DS-32B2 - page 86

    1 1-70 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands chassisShow Display a ll field replaceable unit s (FRUs). Syntax chassisShow A v ailabiity All users Descr iption Use this co mmand to i nventory and di splay the field replaceable unit (FRU) header cont ent for each object in the chassis. On some platforms f ...

  • EMC DS-32B2 - page 87

    1 chas sisSho w 1-71 T elnet Com mands Operands None 6 Displays the date the FRU was manufactured. Manufacture: Day: < dd > Month: < mm > Ye a r : < yyyy > 7 Displays the date the FRU header was last updated. Update: Day: < dd > Month: < mm > Ye a r : < yyyy > 8 Displays cumulative time , in days, that the FRU ha ...

  • EMC DS-32B2 - page 88

    1 1-72 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Example T o display all Field Replaceable Unit s for a switch: switch12k:admin> chassisShow SW BLADE Slot: 3 Header Version: 1 Power Consume Factor: -180 Brocade Part Num: 60-0001532-03 Brocade Serial Num: 1013456800 Manufacture: Day: 12 Month : 6 Year: 20 ...

  • EMC DS-32B2 - page 89

    1 chippr opsh ow 1-73 T elnet Com mands chippro psho w Display ASIC chip property contents. Syntax chippropshow [ slot/ ] chip | [ slot ] -all A v ailability All users Descr iption Use this command to display the ASIC chip property contents for the specified chip on the specified blade slo t. If the slot operand is not specified, then the slot defi ...

  • EMC DS-32B2 - page 90

    1 1-74 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands See Als o ptpropshow minispropshow ...

  • EMC DS-32B2 - page 91

    1 chip regshow 1-75 T elnet Com mands chipreg show Display port regist ers of a given chi p number . Syntax chipregshow [ slot/ ] chip [ filter ] A v ailability All users Descr iption Use this command to display the ASIC register contents for the specified chip on the specified blade slo t. Operands This command has the f ollowing operands: Example ...

  • EMC DS-32B2 - page 92

    1 1-76 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands cmemRetentionT est Run da ta retention te st of the central me mory SRAMs . Syntax cmemRetentionTest [ passCount ] A v ailability Admin Descr iption Use this command to verify for data retention in the central memory SRAMs in the ASIC. This command may not b ...

  • EMC DS-32B2 - page 93

    1 cmiTest 1-77 T elnet Com mands cmiT est T est the quad connections between two ASIC co nnections. Syntax cmitest [-passcnt passcnt][-txport lis t][-rxport list][-skip mask] A v ailability Admin Descr iption Use this comma nd to verify that the multipl exed four-bit Control Message Interface (CMI) point-to-point connection between two ASICs is fun ...

  • EMC DS-32B2 - page 94

    1 1-78 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Error s When it detects failure(s), the subtest may r eport one or more of the followi ng err or messag es: DIAG-CMISA1 DIAG-CMINOCAP DIAG-CMICKSUM DIAG-CMIINVCAP DIAG-CMIDATA DIAG-INTNIL DIAG-BADINT See Als o camTest centralMemoryTest cmemRetentionTest cross ...

  • EMC DS-32B2 - page 95

    1 configDef ault 1-79 T elnet Com mands configD efault Restore system confi guration to default setti ngs. Syntax configDefault A v ailability Admin Descr iption Use this comma nd to reset system configuration to default valu es. All configu ration para meters, with the followi ng exception s, are re set to default values: ◆ Ethernet MAC ad dress ...

  • EMC DS-32B2 - page 96

    1 1-80 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands configDo wnload Downloa d the switch con figuration from a host file . Syntax configDownload [ host , user , file [, passwd ]] A v ailability Admin Descr iption Use this com mand to down load the s witch configurat ion file from a host system . The configurat ...

  • EMC DS-32B2 - page 97

    1 configDownl oad 1-81 T elnet Com mands Operands This command has the f ollowing operands: Example T o download a bac kup configuration fr om a host system: switch:admin> configDownload "citadel" , "jdoe", "config.txt" Committing configuration...done. download complete Error s Listed below are possible reasons for ...

  • EMC DS-32B2 - page 98

    1 1-82 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands configShow Display sy stem configu ration settings. Syntax configShow [" filter" ] A v ailability All users Descr iption Use this com mand to view system config uration settings set by the configure command. Operand This command has the f ollowing o ...

  • EMC DS-32B2 - page 99

    1 configShow 1-83 T elnet Com mands See Al so agtcfgShow configure diagDisablePost diagEnablePost ipAddrShow licenseShow syslogdIpShow ...

  • EMC DS-32B2 - page 100

    1 1-84 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands configUpload Create a backup file of switch confi guration informa tion on a h ost workstat ion. Syntax configUpload [" host" , " user" ," file" [," passwd" ]] A v ailability Admin Descr iption Use this command to uploa ...

  • EMC DS-32B2 - page 101

    1 configUpl oad 1-85 T elnet Com mands Example T o create a backup file of swit ch configuration inf or mation: swd5:admin> configDownload "citadel", "jdoe", "config.txt", "passwd" upload complete swd5:admin> If you enter the co mmand with no operands, the sy stem prompts you for the appr opriate values ...

  • EMC DS-32B2 - page 102

    1 1-86 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands configure Modify sy stem config uration settings. Syntax configure A v ailability Admin Descr iption Use this command to change the following system configuration settings: ◆ Fabric parameters ◆ V irtua l channel settings ◆ Switch Operatin g Mode ◆ Zo ...

  • EMC DS-32B2 - page 103

    1 configure 1-87 T elnet Com mands Fabric Parameters There ar e a number of settings that contr ol the overall behavior and operation of the fabric. So me of these values, s uch as the domain, ar e assigned automatically by the fabric and may dif fer from one switch to another in the fabric. Other para meters, such as the BB-cr edit, can be changed ...

  • EMC DS-32B2 - page 104

    1 1-88 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Descriptions of the switch fabric setting fields ar e as follows: Domain The domain number un iquely identifies th e switch in a fabric. This value is automatica lly assigned by the Fabric. The ran ge of valid values varies dependin g on the switch model and ...

  • EMC DS-32B2 - page 105

    1 configure 1-89 T elnet Com mands Sequence Lev el Switching When sequence level switching is set to 1, frames of the same sequence fr om a particular sour ce ar e transmitted together as a group. When this featur e is set to 0, frames ar e transmitted interleaved amo ng multiple sequ ences. Under normal con ditions, sequen ce level switching sh ou ...

  • EMC DS-32B2 - page 106

    1 1-90 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands Core Switch PID For mat This is used to set the 256 port PID forma t that is used for core switches . Per -fr ame Route Pr iori ty In addition to the eight virtual channels used in frame ro uting priority , support i s also available for per-frame based prior ...

  • EMC DS-32B2 - page 107

    1 configure 1-91 T elnet Com mands The V irtual Channel Setting fields as show in T a ble 1-4: Switch Operating Mode The functional ity of this parameter is currently not supported. Zoning Operation Par a m e te r s The Zoning Operation Parameter fields ar e as follows: Standard Mode Specify 1 to force the switch to issue intersw itch traffic confo ...

  • EMC DS-32B2 - page 108

    1 1-92 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands NS Pre-zoning Mode The NS Prezoning Mode field is a s follows: Pre-zoned r esponses Mode Specify 0 for Stan dar d Mode, or 1 for Pr e-zoning O n. The default value is 0. Arbitrated Loop Settings The Arbitrated Loop Setting fields ar e sh own in T able 1-5: Se ...

  • EMC DS-32B2 - page 109

    1 configure 1-93 T elnet Com mands Do Not All o w AL_P A 0x00? This option disallows AL P A values from being 0. Initialize All Looplets? When this is set , all looplets incl uding the on es not in the same z one are a lways re-initialized. This is r equired for certain RAID subsystems to work properly during failover . System Ser vices The System ...

  • EMC DS-32B2 - page 110

    1 1-94 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands rus ers d Dynamically enables or disables a server that r eturns information about the u ser logged into th e system t hr ough remote procedure calls (RPCs). The information r eturned includes user login name, the system name, login protocol or type, login ti ...

  • EMC DS-32B2 - page 111

    1 configure 1-95 T elnet Com mands Por tl o g E ven t s E n a b le Use these parameters to specify which events cr eate an entry in the port log. The Portlog E vents fields are shown in T able 1-7: Ta b l e 1 - 7 Configure Command P or tlog Events Pa rameters Field (V alid V alues) Default V alue star t: a switch start or re-star t ev ent (on, off) ...

  • EMC DS-32B2 - page 112

    1 1-96 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands nbrfsm: neighbor state transitio n (on, off): [on] timer : timer (on, off): [on] sn: speed negoti ation state (on, off): [on] fcin: Fibre Chann el input (on, off): [on] fcout: Fibre Channel ouput (on, off): [on] read: Fibre Cha nnel rea d (on, off): [on] writ ...

  • EMC DS-32B2 - page 113

    1 configure 1-97 T elnet Com mands Example T o set the configuration parameters for a switch: switch:admin> configure Configure... Fabric parameters (yes, y, no, n): [ no] yes Domain: (1..239) [1] R_A_TOV: (4000..120000) [10000] E_D_TOV: (1000..5000) [2000] 5000 Data field size: (256..2112) [2112 ] Sequence Level Switching: (0..1) [ 0] Disable D ...

  • EMC DS-32B2 - page 114

    1 1-98 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual T elnet Commands crossP or tT es t T est the functional o peration of the switch. Syntax crossPortTest [ passCount , loopbackmode , speedmode ] A v ailability Admin Descr iption Use this command to verify the fun ctional operation of the switch. This command verifies operatio ...

  • EMC DS-32B2 - page 115

    1 cr ossP ortT est 1-99 T elnet Com mands 6. Check if any of the 8 statistic error counters ar e non-zero: ENC_in, CRC_err , T runcFrm, Fr mT ooLong, BadEOF , Enc_out, Ba dOrdSet, DiscC3. 7. Check if the transmit, r eceive or class 3 r eceiver counters are stuck at s ome valu e. 8. Check if the number of frames transmitted is no t equal to the numb ...

  • EMC DS-32B2 - page 116

    1 1-100 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands T o run the crossPortTest command successfully the test must find at least one port (if singlePortAlso loopback mode is active) or two ports (i f singl ePor tAl so lo opba ck m ode i s not a ctiv e) c able loopbacked to each other . If this criteria is not m ...

  • EMC DS-32B2 - page 117

    1 cr ossP ortT est 1-1 01 T elnet Com mands Operands This command has the f ollowing operands: passCount Specify the number of times to execute this test. The default value is 1. This operand is option al. lbmode Select the loopback point for the test. By default, crossporttest uses cable loopback as described above. However for debug purposes you ...

  • EMC DS-32B2 - page 118

    1 1-102 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands sp Select the speed mode for the test. This parameter is only used for 2 Gb/s capable products where it co ntrols the speed at which each port is operated. For 1 Gb/s only products it is ignored. The exact operati on of modes 3- 6 depe nds upon the loopback ...

  • EMC DS-32B2 - page 119

    1 cr ossP ortT est 1-1 03 T elnet Com mands Example T o ex ecute a functional test of all the ports on a switch 100 times: switch:admin> crossporttest Running Cross Port Test .... passed. Diagnostics Below are possible error messages if fai lures are detected: 0x20 ERR_STAT_ENCIN 0x21 ERR_STAT_CRC 0x22 ERR_STAT_TRUNC 0x23 ERR_STAT_2LONG 0x24 ERR ...

  • EMC DS-32B2 - page 120

    1 1-104 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands 0x2f PORT_WRONG 0x30 ERR_STATS_ENCIN 0x31 ERR_STATS_CRC 0x32 ERR_STATS_TRUNC 0x33 ERR_STATS_2LONG 0x34 ERR_STATS_BADEOF 0x35 ERR_STATS_ENCOUT 0x36 ERR_STATS_BADOS 0x37 ERR_STATS_C3DISC 0x38 ERR_STATS 0x3a INIT 0x3b DATA 0x3c NO_SEGMENT 0x39 TIMEOUT 0x3d STAT ...

  • EMC DS-32B2 - page 121

    1 dataT ypeSh ow 1-105 T elnet Com mands dataTypeSho w Display sa mple data stream types used in some diag nostic commands. Syntax dataTypeShow A v ailability All users Descr iption Displays s ample data streams typ es used in diagn ostic command s. There are 19 differ ent sample data types. The command displays an example of each data str eam. Exa ...

  • EMC DS-32B2 - page 122

    1 1-106 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands date Display or set s ystem d ate and time. Syntax date [" newdate" ] A v ailability All users (displa y) Admin ( set) Descr iption Use this command with no o perands to display date a nd time. Use the newdate operand to s et the date and time. Dat ...

  • EMC DS-32B2 - page 123

    1 date 1-107 T elnet Com mands See Al so errLogShow portLogShow uptime ...

  • EMC DS-32B2 - page 124

    1 1-108 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagClearError Clear the diag softwar e flag to allow for r etest. Syntax diagclearerror [[-slot] slot][-switch switch] | -all A v ailability Admin Descr iption Use this command to clear the diag software flag that indicates whether a port is BAD or OK. Th e ...

  • EMC DS-32B2 - page 125

    1 diag Comm andS ho w 1-109 T elnet Com mands diagCommandSho w Display a list o f diagnostic com mands. Syntax diagCommandShow A v ailability Admin Descr iption Use this comman d to display a list of diagnostic co mmands for v4.0. Operands None Example T o display a list of v4.0 diagnostic commands: switch:admin> diagcommandshow diagCommandShow ...

  • EMC DS-32B2 - page 126

    1 1-110 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands turboramtest Turbo speed as ic SRAM diagnostic statstest Statistics cou nter diagnostic portledtest User Ports LED exerciser filtertest Frame filter d iagnostic backplanetest Backplane conn ection diagnostic switch:admin> ...

  • EMC DS-32B2 - page 127

    1 diagDi sa bleP ost 1-111 T elnet Com mands diagDisableP ost Disable POST execution at r eboot. Syntax diagDisablePost A v ailability Admin Descr iption Use this command to disable power nn self tes t (POST) execution at switch reboot. This mode is s aved in flash memory and PO ST remains disabled until it is ena bled using the diagEnablePost comm ...

  • EMC DS-32B2 - page 128

    1 1-112 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagEnableP ost Enable POST execution at next rebo ot. Syntax diagEnablePost A v ailability Admin Descr iption Use this command to enable power on self tes t (POST) execution at the next switch reboot. This m ode is saved in flash memory and POST remains ena ...

  • EMC DS-32B2 - page 129

    1 diage sdp orts 1-113 T elnet Com mands diagesdports Set ESD skip po rts list. Syntax diagesdports [ list | -show] A v ailability Admin Descr iption Use this command to set the ESD IDLE PORTS list. The list is sa ved in nonvolatile memory and stays in that mode until the next execution of diagesdports . The ESD IDLE ports ar e used by several of t ...

  • EMC DS-32B2 - page 130

    1 1-114 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagfai llimit Set diagn ostics fa il limit. Syntax diagfaillimit [ limit | -show] A v ailability Admin Descr iption Use this command to set the diag nostics f ail limit to a specified value. The fail limit is saved in nonvol atile mem ory and stays set unti ...

  • EMC DS-32B2 - page 131

    1 diagHelp 1-1 15 T elnet Com mands diagHelp Display dia gnostic commands inf ormation . Syntax diagHelp A v ailability All users Descr iption Use this com mand to display a list of the diagno stic help com mands for troubleshooting sw itch problems. Operands None Example T o display information about diagnostic commands: switch:admin> diagHelp ...

  • EMC DS-32B2 - page 132

    1 1-116 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands turboramtest Turbo speed as ic SRAM diagnostic statstest Statistics cou nter diagnostic portledtest User Ports LED exerciser filtertest Frame filter d iagnostic backplanetest Backplane conn ection diagnostic See Als o diagcommandshow ...

  • EMC DS-32B2 - page 133

    1 diaglo opid 1-117 T elnet Com mands diagloopid Set the diag nos ti cs lo op ID . Syntax diagloopid [ id | -show] A v ailability Admin Descr iption Use this command to select the loop ID to be used by FL mode diagnostics. The value enter ed will be converted fr om a loop ID to the corre sponding ALP A and used as the port addres s for any diagnost ...

  • EMC DS-32B2 - page 134

    1 1-118 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagmodepr Enable or disable mode messages. Syntax diagmodepr [ mode | -show] A v ailability Admin Descr iption Use this command to enable print mode. The m ode is saved in nonvolatile memory and stays in that mode until the next execution of diagmodepr . Th ...

  • EMC DS-32B2 - page 135

    1 diagp ost 1-119 T elnet Com mands diagpost Enable or disable POS T testing. Syntax diagpost [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable POST testing. The mode is saved in non-vo latile memory an d stays in tha t mode until the next execution of diagpost . The mode becomes active as soon a s this command ...

  • EMC DS-32B2 - page 136

    1 1-120 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagretr y Enable or dis able re try mode. Syntax diagretry [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable r etry mode. The mode is saved in nonvo latile memo ry and stays in that mode until the next execution of diag ...

  • EMC DS-32B2 - page 137

    1 diagse tbur inin 1-1 21 T elnet Com mands diagsetburinin Initializes the bla de for a burn-in run. Syntax diagsetburnin [-slot [ slot ]] scriptnam e A v ailability Admin Descr iption Use this command to set up the bla de burn-in parameters for the register ed burn-in script. Once this is known, then the blade par amete rs a re in itia liz ed. The ...

  • EMC DS-32B2 - page 138

    1 1-122 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagsetc y cle Set diagnostic script parameters. Syntax diagSetCycle < script_name > [-show|-def ault|< -keyword value >..] A v ailability Admin Descr iption Use this command to update diagnos tic command parameters. W ith only the script operand ...

  • EMC DS-32B2 - page 139

    1 dia gsetc ycle 1-123 T elnet Com mands Example T o view the parameters for a script: switch:admin> diagsetcycle -show Syntax: diagSetCycle <script_name> [ - show | -default | <-keyword valu e>.. ] -show Outputs the values of the variables (No editing) -default Sets the values to the default value -keyword value Sets the value of a ...

  • EMC DS-32B2 - page 140

    1 1-124 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagSho w Print diagno stic results since the la st boot. Syntax diagshow [-slot slot][-uports itemlist][-bport s itemlist] [-use_bports value] A v ailability All users Descr iption Use this command to display the diagnostics status for the speci fied list o ...

  • EMC DS-32B2 - page 141

    1 diagShow 1-125 T elnet Com mands Example T o display diagnostic status on switch blade 7: switch:admin> diagshow -slot 7 Diagnostics Status: Wed Feb 13 16:12: 27 2002 Slot: 7 UPORTS Port BPort Diag Active Speed FrTX FrRX LLI Er rs loopback 0 15 OK DN 2G Auto -- -- -- 1 14 OK DN 2G Auto -- -- -- 2 13 OK DN 2G Auto -- -- -- 3 12 OK UP 2G Auto 39 ...

  • EMC DS-32B2 - page 142

    1 1-126 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagsho wtime Enable or dis able elapsed time messages. Syntax diagshowtime [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable show time m ode. The mode is saved in nonvo latile memo ry and stays in that mode until the ne ...

  • EMC DS-32B2 - page 143

    1 diagsilk worm 1-127 T elnet Com mands diagsilkw or m Enable or dis able silkworm mode. Syntax diagsilkworm [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable si lkworm mode. The mode is saved in nonvo latile memo ry and stays in that mode until the next execution of diagsilkworm . The mode becomes active as so ...

  • EMC DS-32B2 - page 144

    1 1-128 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands diagskiptests Enable or disa ble diagn ostics skip te st flags. Syntax diagskiptests [ limit | -show] A v ailability Admin Descr iption Use thi s command to enable or disable the d iagnost ics skip test f lags. The skip test fl ags ar e save d in nonv olati ...

  • EMC DS-32B2 - page 145

    1 diagsto pburn in 1-129 T elnet Com mands diagstopburnin T erm inat e a bl ade b urn- in run . Syntax diagstopburnin [-slot slot ] A v ailability Admin Descr iption This determ ines which P ID is running burn-in on a blade and terminates that activity . It is expected that the burn-in script handles the logging cleanup. This command does no t requ ...

  • EMC DS-32B2 - page 146

    1 1-130 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands dlsRes et T urn off dyn amic load sh ari ng opt ion. Syntax dlsReset A v ailability Admin Descr iption Use this command to turn of f DLS when a fabric change occurs. Routing is generally based on the incoming port and the desti nation doma in. T his m eans t ...

  • EMC DS-32B2 - page 147

    1 dlsReset 1-131 T elnet Com mands Examples T o disable the dynamic load sharing option: switch:admin> dlsReset Committing configuration...done. switch:admin> dlsShow DLS is not set See Al so dlsSet dlsShow ...

  • EMC DS-32B2 - page 148

    1 1-132 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands dlsSet T urn on dyna mic loa d shar ing opti on. Syntax dlsSet A v ailability Admin Descr iption Use this command to enable dynamic load sharing when a fabric change occurs. Routing is done on a per-source- port basis. Th is means that a ll the traffic comin ...

  • EMC DS-32B2 - page 149

    1 dlsSe t 1-133 T elnet Com mands Example T o enable the dynamic load sharing option: switch:admin> dlsSet Committing configuration...done. switch:admin> dlsShow DLS is set See Al so dlsReset dlsShow ...

  • EMC DS-32B2 - page 150

    1 1-134 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands dlsSho w Display th e state of the d ynamic loa d sharin g (DLS) optio n. Syntax dlsShow A v ailability All users Descr iption Use this command to display whether DL S is on or off. There can be two mess ages d isplayed: DLS is set The DLS op tion is tur ned ...

  • EMC DS-32B2 - page 151

    1 errDum p 1-135 T elnet Com mands errDu mp Display th e err or log with out page breaks. Syntax errDump [-s swinst] [-p] [-a] A v ailability Admin Descr iption Use this comma nd to display the error log without page breaks. This command dis plays the sam e informa tion as errShow , but errShow enables you to scroll through the entries using E NT E ...

  • EMC DS-32B2 - page 152

    1 1-136 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operand: Example T o display the err or log without page breaks: switch: switch:admin> errDump Error 03 -------- 0x2a5 (fabos): Jun 14 12:03:51 Switch: 0, Debug HAMKERNEL-IP_UP, 5, ( session=3) Heartbeat up from St ...

  • EMC DS-32B2 - page 153

    1 errShow 1-137 T elnet Com mands errSh ow Scroll through the err or log. Syntax errShow [-s swinst] [-p] [-a] A v ailability Admin Descr iption Use this com mand to display th e erro r log. This comm and enables you to scroll through the entries using the E NTER key . Use errDump to display the same in formation w ithout line breaks. The output of ...

  • EMC DS-32B2 - page 154

    1 1-138 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands T a ble 1-8 lists the errShow entries: T a ble 1-9 lists the error code numbers for v4.0, the POST test that generates this number , and the type of error . Ta b l e 1 - 8 errShow Entries Entry Description Error Number Beginning at one. If the number of err ...

  • EMC DS-32B2 - page 155

    1 errShow 1-139 T elnet Com mands 0110 0111 0112 040F 0415 0416 Err# 0B0F 0B15 0B16 1020 1021 1025 1026 1027 1028 1029 102A 102B 102C 1030 106F 1F25 1F26 1F27 Ta b l e 1 - 9 Error Codes fo r v4.0 ( continued ) Entry Descrip tion ...

  • EMC DS-32B2 - page 156

    1 1-140 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands 2030 2031 2032 2033 2034 2035 2036 223B 223C 2271 2640 2641 2642 2643 2644 Err# 2645 2646 2647 264F 265F 2660 2661 2662 266E Ta b l e 1 - 9 Error Codes for v4.0 ( continued ) Entry Descrip tion ...

  • EMC DS-32B2 - page 157

    1 errShow 1-141 T elnet Com mands 266F 2670 2671 3040 3041 3042 3043 3044 3045 3046 3047 304F 305F 3060 3061 3062 306E 306F 3070 3071 3078 3840 3841 3842 3843 Ta b l e 1 - 9 Error Codes fo r v4.0 ( continued ) Entry Descrip tion ...

  • EMC DS-32B2 - page 158

    1 1-142 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: Example The follow ing illustrat es entries in th e err or log: switch:admin> errShow Error 14 -------- 0x304 (fabos): Jun 14 11:57:52 Switch: 0, Warning FW-STATUS_SWITCH, 3 , Switch status changed from H ...

  • EMC DS-32B2 - page 159

    1 errShow 1-143 T elnet Com mands Type <CR> to continue, Q<CR> to stop: See Al so errDump firmwareDownload reboot uptime ...

  • EMC DS-32B2 - page 160

    1 1-144 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fabricSho w Displays fa bric membership information . Syntax fabricShow A v ailability All users Descr iption Use this com mand to displa y informatio n about swi tches and multicast alias group s in the f abric. Multica st alia s groups are created on deman ...

  • EMC DS-32B2 - page 161

    1 fa b r i c S h ow 1-1 45 T elnet Com mands Example The follo wing example s hows a fa bric of four sw itches. sw180 is the principal switch. Three of the switches ar e configured to r un IP over Fibre Channel. There is one multicast alias group. switch:admin> fabricShow Switch ID Worldwide Name E net IP Addr FC IP Addr N ame ------------------ ...

  • EMC DS-32B2 - page 162

    1 1-146 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fabStatsSho w Display th e fabric statistics in formation. Syntax fabStatsShow A v ailability All users Descr iption Use this com mand to display th e statistics inf ormation of fabric. The fol low ing in fo rmat ion is di spla ye d: ◆ Number of times a sw ...

  • EMC DS-32B2 - page 163

    1 fanDisable 1-1 47 T elnet Com mands fanD isable Disab le a fan uni t. Syntax fanDisable unit A v ailability Admin Descr iption Use this com mand to disable a nonfau lty fan unit by s etting the RPM speed to 0. Operand This command has the f ollowing operand: Example T o disable a fan unit: switch:admin> fandisable 1 Fan unit 1 has been disable ...

  • EMC DS-32B2 - page 164

    1 1-148 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fanE nable Enable a fa n unit. Syntax fanEnable unit A v ailability Admin Descr iption Use this comma nd to set the fan unit back to the default RP M speed only if the fa n unit has been previously dis abled using the fanDisable co mmand. Operand This comman ...

  • EMC DS-32B2 - page 165

    1 fa n S h ow 1-1 49 T elnet Com mands fanS ho w Display f an status. Syntax fanShow A v ailability All users Descr iption Use this command to display the curr ent status of the switch fans. The format of the display varies accord ing to the number of fans installed . Some sw itch mode ls show f an speed me asured in RPM . Fan statu s is show n as: ...

  • EMC DS-32B2 - page 166

    1 1-150 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fas t b o ot Reboot the switch, bypassing POST . Syntax fastboot A v ailability Admin Descr iption Use this command to reboot th e switch, bypassing POST . The reboot takes effect immediately as the switch resets and executes normal power-up booting sequence ...

  • EMC DS-32B2 - page 167

    1 fa z o n e A d d 1-151 T elnet Com mands faz o n eA d d Add a member to a Fabri c Assis t zone. EMC does not support this comm and. Syntax fazoneAdd “ fazoneName ” , “ member ; member ” A v ailability Admin Descr iption Use this command to add one or more members to an existing Fabric Assist zone. This command does not chan ge the defined ...

  • EMC DS-32B2 - page 168

    1 1-152 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o add aliases f or some disk arrays to “ Blue_f azone ” : switch:admin> fazoneAdd “ Blue_faz one ” , “ array3; array4; array5 ” T o add a Fabric Assist host member to “ Blue_fazone ” : switch:admin> fazoneAdd “ Blue_faz one ...

  • EMC DS-32B2 - page 169

    1 fa z o n e C r e a t e 1-1 53 T elnet Com mands faz o n eC r e a te Create a Fabric Assist zone. EMC does not support this comm and. Syntax fazoneCreate “ fazoneName ” , “ member ; mem ber ” A v ailability Admin Descr iption Use this command to cr eate a n ew Fabric Assist zo ne. Y ou mu st specify a name and member list for a Fabric Assi ...

  • EMC DS-32B2 - page 170

    1 1-154 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands A Fa bric Assis t host m ember is de fined by wr apping the physi cal fabric port or a physical device (a WWN) between “ H{ ” and “ } ” . For example, “ H{5,6} ” or “ H{10 :00 :00: 60: 69:0 0:00 :8a } ” is a Fabric Assis t host. The type of F ...

  • EMC DS-32B2 - page 171

    1 fa z o n e C r e a t e 1-1 55 T elnet Com mands Example T o create three Fabric Assist zones using a mixture of port numbers and Fabric Assist zone aliases: switch:admin> fazoneCreate “ fazon e1 ” , “ H{1,0}; loop1 ” switch:admin> fazoneCreate “ fazone 2 ” , “ H{1,1}; array1; 1,2; array2 ” switch:admin> fazoneCreate “ f ...

  • EMC DS-32B2 - page 172

    1 1-156 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands faz o n eD e l et e Delete a Fabric Assist mo de zone. EMC does not support this comm and. Syntax fazoneDelete “ fazoneName ” A v ailability Admin Descr iption Us e th is c om man d t o de le te a n ex is tin g F abr ic Ass ist mo de z one on a fabric. T ...

  • EMC DS-32B2 - page 173

    1 fa z o n e R e m ov e 1-1 57 T elnet Com mands fa zo n e R e m ove Remo ve mem bers fr om a Fabr ic Assist mode zone. EMC does not support this comm and. Syntax fazoneRemove “ fazoneName ” , “ member; me mber ” A v ailability Admin Descr iption Use this command to r emove one or mor e members fr om an existing Fabric Assist zo ne. Each de ...

  • EMC DS-32B2 - page 174

    1 1-158 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands The following operands are r equired: Example To remove “ array2 ” from “ Blue_ fazone ” : switch:admin> fazoneRemove “ Bl ue_fazone ” , “ arra y2 ” See Als o fazoneAdd fazoneCreate fazoneDelete fazoneShow fazoneName Specify a nam ...

  • EMC DS-32B2 - page 175

    1 fa z o n e S h o w 1-159 T elnet Com mands faz o n eS h ow Display f azone info rmation. EMC does not support this comm and. Syntax fazoneShow [" pattern "[, transflag ]] A v ailability All users Descr iption Use this com mand to display f azone info rmation. Specifying this command with no parameters or w ith the second parameter set t ...

  • EMC DS-32B2 - page 176

    1 1-160 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display all f azones beginning with the letter s A thr ough C: switch:admin> fazoneShow "[A-C]*" fazone: Blue_fazone 1,1; array1; 1,2; array2 See Als o fazoneAdd fazoneCreate fazoneDelete fazoneRemove transflag Specify 0 to dis play ...

  • EMC DS-32B2 - page 177

    1 filterT est 1-1 61 T elnet Com mands filterT est Run frame fi lter test for 3 000 ASICs. Syntax filterTest [-passcnt passcnt][-txports list][-scamoff offset] [-dcamoff offset][-fdefoff off set] A v ailability Admin Descr iption Use this command to verify that the 3000 ASIC fra me-level filtering logic includes every type o f filter actions: ◆ F ...

  • EMC DS-32B2 - page 178

    1 1-162 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the following operands: Diagnostics When it detects failure(s), the subtest may r eport one or more of the followi ng err or messag es: DIAG-FLTINIT DIAG-FLTXMIT DIAG-FLTRCV DIAG-ACTTEST DIAG-NUMTEST 7 Zone A match and ALP A match 8 ...

  • EMC DS-32B2 - page 179

    1 filterT est 1-1 63 T elnet Com mands Example T o r un the filterT est: switch:admin> filterTest Running Filter Test ........... passed . See Al so ramTest portRegTest cmiTest centralMemoryTest sramRetentionTest turboRamTest camTest statsTest portLoopbackTest spinSilk ...

  • EMC DS-32B2 - page 180

    1 1-164 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fir mwa re C o m mi t Comm it s witc h fi rmwar e updat e. Syntax firmwareCommit A v ailability Admin Descr iption Use this command to propagate an updated firmware image in the primary partiti on to the secondar y partition in an individual CP blade. For th ...

  • EMC DS-32B2 - page 181

    1 fir m wa r e D ow n l o a d 1-165 T elnet Com mands fir mwa re D ow nl o ad Downloa d a switch fi rmware file from a host. Syntax firmwareDownload [[-sbni] host,user,pf ile [, passwd]] A v ailability Admin Descr iption Use this com mand to download sw itch firmware from a r emote host or from a local dir ectory to the sw itch ’ s non-volat ile ...

  • EMC DS-32B2 - page 182

    1 1-166 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This comman d has the following operands: -s Specify this o ption to enable Single CP Mode. This option is available in v4.0 only . In th e ED-12000B, by default, firmwareDownload w ill upgrade both CPs. This mode enables the users to upgrade a sing ...

  • EMC DS-32B2 - page 183

    1 fir m wa r e D ow n l o a d 1-167 T elnet Com mands If no operand is specified, the o peration becom es interact ive and you are pr o mpted for input. Example T o download a f irmware f ile: switch:admin> firmwaredownload Server Name or IP Address: 192.168.166 .30 User Name: johndoe File Name: /v4.0.2/release.plist Password: xxxxxx Full Instal ...

  • EMC DS-32B2 - page 184

    1 1-168 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Errors The following can cause the download to fail: ◆ The host name i s no t kno wn to the swit ch. ◆ The host IP addr ess cannot be contacted. ◆ The user does not have permission on the host. ◆ The user runs a script that prints something at log in ...

  • EMC DS-32B2 - page 185

    1 fir m wa r e R e s to r e 1-169 T elnet Com mands fir mwa re R e st o r e Restore old active firmware image from the secondary partition. Syntax firmwareRestore A v ailability Admin Descr iption Use this command to restor e the old active firmware image. This is only possi ble if the last firmw aredownload was not committed. After a fi rmwaredown ...

  • EMC DS-32B2 - page 186

    1 1-170 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fsp fSh ow Display FSPF proto col i nformation . Syntax fspfShow A v ailability All users Descr iption Use this comma nd to display the Fibre-Channel Shortest Path First (FSPF) protocol informatio n, and int ernal data structures. FSPF is implemented by a si ...

  • EMC DS-32B2 - page 187

    1 fspfS ho w 1-171 T elnet Com mands Operands None Examples T o display FSPF protocol information: switch:admin> fspfshow version = 2 domainID = 1 switchOnline = TRUE domainValid = TRUE domainConfirmed = TRUE isl_ports[0] = 0x00000000 isl_ports[1] = 0x74000000 trunk_ports[0] = 0x00000000 trunk_ports[1] = 0x00000000 f_ports[0] = 0x00000000 f_port ...

  • EMC DS-32B2 - page 188

    1 1-172 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands See Als o bcastShow mcastShow topologyShow uRouteShow ...

  • EMC DS-32B2 - page 189

    1 fwAlar msFilterSet 1-1 73 T elnet Com mands fwAlar msFilterSe t Show which a larms are enabled for Fabric W atch. Syntax fwAlarmsFilterSet [ mode ] A v ailability Admin Descr iption Use this com mand to configure alarm filtering. By turni ng off the alarm s, all no nenv ironment cla ss ala rms are supp ressed. By tu rning on the ala rms, all clas ...

  • EMC DS-32B2 - page 190

    1 1-174 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwAlar msFilterShow Show al arm filtering for Fabric W a tch. Syntax fwAlarmsFilterShow A v ailability All users Descr iption Use this com mand to show alarm filterin g status for Fabric W a tch. This comm and r equir es a Fabric W atch license. Operands Non ...

  • EMC DS-32B2 - page 191

    1 fwCl assIn it 1-175 T elnet Com mands fwClassInit Initialize all classes under Fabric W atch. Syntax fwClassInit A v ailability Admin Descr iption Use this com mand to initial ize all classes und er Fabric W atch. This comm and r equir es a Fabric W atch license. Operands None Example T o initialize all clases under F abric W atch: switch:admin&g ...

  • EMC DS-32B2 - page 192

    1 1-176 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwConfigReload Reload the Fabric W a tch configurat ion. Syntax fwConfigReload A v ailability Admin Descr iption Use this comman d to initia lize reload the F abric W atch co nfigurati on. This command sh ould on ly be used after downlo ading a new Fabric W ...

  • EMC DS-32B2 - page 193

    1 fwConfigure 1-177 T elnet Com mands fwConf igure Display and modify the Fabric W atch configura tion and status . Syntax fwConfigure A v ailability Admin Descr iption Use this command to display and modify thresho ld information fo r the Fabric W atch co nfigurati on. Switch el ements moni tored by Fabric W atch are divided i nto classes, which a ...

  • EMC DS-32B2 - page 194

    1 1-178 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Fabric class Loss of E_ Port Fabric reconfigure Segmentatio n changes Doma in ID cha nges Zonin g chang es Fabric to Quic kLoop changes. v3.0 o nly . Fabric logins SFP stat e ch ange E_Port clas s Link failure count Loss of sy nchronizat ion coun t Loss of s ...

  • EMC DS-32B2 - page 195

    1 fwConfigure 1-179 T elnet Com mands Fabric class Loss of E_ Port Fabric reconfigure Segmentatio n changes Doma in ID cha nges Zonin g chang es Fabric to Quic kLoop changes. v3.0 o nly . Fabric logins SFP stat e ch ange E_Port clas s Link failure count Loss of sy nchronizat ion coun t Loss of si gnal count Primitive sequence protocol err or Invali ...

  • EMC DS-32B2 - page 196

    1 1-180 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands None Example T o reload the sa ve d Fabric W atch conf iguration: switch:admin> fwConfigure 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 : ...

  • EMC DS-32B2 - page 197

    1 fwConfigure 1-181 T elnet Com mands inBetween Thu Aug 1 10:4 9:44 2002 30 C Norma l 3 envTemp003 enabled 42 C inBetween Thu Aug 1 10:4 9:44 2002 47 C Norma l 5 envTemp005 enabled 38 C inBetween Thu Aug 1 10:4 9:44 2002 43 C Norma l 1 : refresh 2 : disable a threshold 3 : enable a threshold 4 : advanced configuration 5 : return to previous page Se ...

  • EMC DS-32B2 - page 198

    1 1-182 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwFruCfg Display or m odify FRU sta te alert config uration. Syntax fwFruCfg A v ailability Admin Descr iption Use this command to configur e FRU states an d actions. Based on these configurat ion settings, Fabric W atch generates action when the FRU state c ...

  • EMC DS-32B2 - page 199

    1 fwFr uCfg 1-1 83 T elnet Com mands 1 Slot #1 enable 32 17 5 Minute 2 Slot #2 enable 8 16 1 Minute 3 Slot #3 enable 16 16 1 Minute 4 Slot #4 enable 48 17 5 Minute 1 : change fru alarm state 5 : ch ange fru status 2 : change fru alarm level 6 : ap ply fru configuration 3 : change alarm frequency 7 : ca ncel fru configuration changes 4 : change fru ...

  • EMC DS-32B2 - page 200

    1 1-184 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwHelp Display Fa bric W a tch command in formatio n. Syntax fwHelp A v ailability All users Descr iption Use this com mand to display com mands used to co nfigure Fabric Wa t c h . Operands None Example T o display a summary of Fabric W atch T elnet comm an ...

  • EMC DS-32B2 - page 201

    1 fwMailC fg 1-185 T elnet Com mands fwM ail Cfg Configure email alerts in Fabric W atch. Syntax fwMailCfg A v ailability Admin Descr iption Use this command to configur e email alerts in Fabric W atch. This comm and r equir es a Fabric W atch License. When this command is executed, a men u of configuration tasks is dis playe d. Selec t the con fig ...

  • EMC DS-32B2 - page 202

    1 1-186 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands When config uring an email alert for a s pecific class, yo u must specify the follow ing info rmation: If the swi tch is r ebooted using switchboot,rebo ot , or fastboot , the email al ert is s et to d isabled and mus t be r eenabled again . Operands None Ma ...

  • EMC DS-32B2 - page 203

    1 fwMailC fg 1-187 T elnet Com mands Example T o configure an email address rec ipient in F abric Watch: switch:admin> fwMailCfg 1 : Show Mail Configuration Informatio n 2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Ema il Alert 6 : Set Domain Name and Name Server 7 : Show Domain Name and Na ...

  • EMC DS-32B2 - page 204

    1 1-188 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwSetT oCustom Set boundary and alarm levels to custo m values. Syntax fwSetToCustom A v ailability Admin Descr iption Use this comman d to set boundary and a larm levels to cust om values for all classes a nd areas for Fabric W atch. This comm and r equir e ...

  • EMC DS-32B2 - page 205

    1 fwSe tT oDefault 1-189 T elnet Com mands fwSetT oDef ault Set boundary and alar m levels to the default values. Syntax fwSetToDefault A v ailability Admin Descr iption Use this co mmand to set bou ndary and alarm levels to default v alues for all classes a nd areas for Fabric W atch. This comm and r equir es a Fabric W atch License. Operands None ...

  • EMC DS-32B2 - page 206

    1 1-190 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fwsh o w Display th e thresholds monit ored by Fabric W atch. Syntax fwShow A v ailability All users Descr iption Use this comma nd to display the thresholds monitored by Fabric Wa t c h . In v3.0, this comm and displays the na me, label, and last valu e for ...

  • EMC DS-32B2 - page 207

    1 fwsho w 1-1 91 T elnet Com mands Counter: Access via: Function call Address: 0x100187dc Argument: 0x00000002 Previous: 0x00000bc5 (3013) Current: 0x00000bc5 (3013) Events: Style: Triggered Event 0 occurred 1 time, last at 19:08:31 on 12/03/1999 Event 1 occurred 80 times , last at 19:47:06 on 12/03/1999 * Event 5 occurred 1 time, last at 19:08:37 ...

  • EMC DS-32B2 - page 208

    1 1-192 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands gbicSho w Display serial ID G BIC informa tion. Syntax gbicShow [ slotnumber /][ portnumber ] A v ailability All users Referen ces to GBI C also apply to S FP . Descr iption Use this com mand to displa y informatio n about Seria l Identificat ion GBICs (also ...

  • EMC DS-32B2 - page 209

    1 gbicSh ow 1-193 T elnet Com mands Operand This command has the f ollowing operand: slotnumber Specify the sl ot number in an ED-12000 B switch. The slot number must be followed by a slash ( / ) and the port number . The ED-12000B has a tota l of 10 slots counted fr om 1 to 10. Slot n umber 5 an d 6 ar e contr ol processor cards, and slot 1 throug ...

  • EMC DS-32B2 - page 210

    1 1-194 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display GBIC summary information, follo w ed by detailed information f or a single GBIC: switch12k:admin> gbicshow Area 0: id (id) Vendor: Serial No: Area 1: id (sw) Vendor: FINISAR CORP. Serial No: H1149T2 Area 2: id (sw) Vendor: FINISAR CORP ...

  • EMC DS-32B2 - page 211

    1 gbicSh ow 1-195 T elnet Com mands switch12k:admin> gbicshow 1/3 Identifier: 3 GBIC Connector: 7 LC Transceiver: 050c402000000000 100,200_ MB/s M5,M6 sw Inter_dist Encoding: 1 8B10B Baud Rate: 21 (units 100 megabaud) Length 9u: 0 (units 100 meters) Length 50u: 30 (units 10 meters) Length 625u: 13 (units 10 meters) Length Cu: 0 (units 1 meter) V ...

  • EMC DS-32B2 - page 212

    1 1-196 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands h Display sh ell history . Syntax h A v ailability All users Descr iption The shell hist ory mecha nism is sim ilar to the UNIX Korn shell h istory facility . It has a built-in line edit or similar to UNIX vi that allows previously typed commands to be edite ...

  • EMC DS-32B2 - page 213

    1 haDisab le 1-197 T elnet Com mands haDisable Disable the hi gh-avai lability feature in the switch. Syntax haDisable A v ailability Admin Descr iption Use this co mmand to disable th e high-availabi lity (HA) feature in the switch. If the HA featur e is alr eady disabled, this command is ignored. Operands None Example T o disable the high av a il ...

  • EMC DS-32B2 - page 214

    1 1-198 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands haEnable Enable the high -availability fe ature in the switch. Syntax haEnable A v ailability Admin Descr iption Use this com mand to enable the hi gh-availa bility (HA) featu re in the Switch. If the HA featur e is already ena bled, this command is ignored. ...

  • EMC DS-32B2 - page 215

    1 haFailover 1-199 T elnet Com mands haF ailo ver Force the fa ilover mechanism so that the standby CP becomes the act ive C P . Syntax haFailover A v ailability Admin Descr iption Use this com mand to force the failover mechanism to occur so that the standby CP becomes the active CP . Because hafailover results in CP reboot, a warning m esage an d ...

  • EMC DS-32B2 - page 216

    1 1-200 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands haSho w Display con trol pr ocessor (CP) s tatus. Syntax haShow A v ailability Admin Descr iption Use this comma nd to display the control processor status, which includes: ◆ Local CP state (slot number and CP ID) ◆ Remote CP state (s lot number and CP I ...

  • EMC DS-32B2 - page 217

    1 help 1-201 T elnet Com mands help Display hel p informat ion for comma nds. Syntax help [ command ] A v ailability All users Descr iption Use this com mand withou t an operand to displ ay an alphab etical list of commands that provide help information. At the end of the lis t are additional comman ds that display gr oups of commands, for example ...

  • EMC DS-32B2 - page 218

    1 1-202 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands histor yLastSho w Display la st history record. Syntax historyLastShow A v ailability All users Descr iption Use this comma nd to display the contents of the las t history log rec o rd . A h i st o r y re co rd c o n t ai n s th ree l i n e s o f i n fo r m ...

  • EMC DS-32B2 - page 219

    1 histor yShow 1-203 T elnet Com mands histor ySho w Display th e history lo g. Syntax historyShow A v ailability All users Descr iption Use this com mand to display th e history log. Each history record contains three lines of information: ◆ The first line of each r ecord contains the following data sets: • Object type: CHASSIS, F A N, POWER S ...

  • EMC DS-32B2 - page 220

    1 1-204 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display the entir e contents of the histor y file: switch:admin> historyShow FAN Unit 3 Removed at Tue Aug 14 10:05:37 1970 Brocade Part Number: 20-123456-12 Brocade Serial Number: 1013456800 POWER SUPPLY Unit 1 Inserted at Tu e Aug 14 10:52:1 ...

  • EMC DS-32B2 - page 221

    1 i 1-205 T elnet Com mands i Display ta sk summary . Syntax i [ taskId ] A v ailability All users Descr iption This command displays information of all of the pro cesses or of a specific process if a process ID is supplied. One line is displayed per process. T able 1-13 explains the fields displayed with this commands: Ta b l e 1 - 1 3 i Fields Fi ...

  • EMC DS-32B2 - page 222

    1 1-206 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operand: Example T o display inf ormation about process ID 433: switch:admin> i 433 F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 000 S 0 433 1 0 69 0 - 1283 5c64 ? 00:00:02 fabricd switch:admin> See Als ...

  • EMC DS-32B2 - page 223

    1 ifMod eSet 1-207 T elnet Com mands ifModeSet Set the link operatin g mode for a network interface. Syntax ifModeSet [" eth0" ] A v ailability Admin Descr iption Use this command to set the link operating m ode for the ethernet interface. Use ifShow to list network interfaces a vailable on the system. An operating mode is confirmed with ...

  • EMC DS-32B2 - page 224

    1 1-208 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o f orce the link f or the eth0 Ethernet interface to auto negotiate and to advertise all possible operating modes: switch:admin> ifModeSet "eth0" Exercise care when using this command. Forcing the link to an operating mode not support ...

  • EMC DS-32B2 - page 225

    1 ifMod eShow 1-209 T elnet Com mands ifModeSho w Display th e link operating m ode for a networ k interface. Syntax ifModeShow [" eth0" ] A v ailability All users Descr iption Use this comma nd to display the link operating mode for a network interface. Operand This command has the f ollowing operand: Example T o display the link operati ...

  • EMC DS-32B2 - page 226

    1 1-210 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands interfaceSho w Display FSPF interface informa tion. Syntax interfaceShow [ slotnumber /][ portnumber ] A v ailability All users Descr iption Use this command to display data str uctures associated with FSPF interfaces (E_Por ts) on the switch . There are two ...

  • EMC DS-32B2 - page 227

    1 interfaceShow 1-211 T elnet Com mands delay: Conv entio nal d elay inc urr ed b y a fra me transmitted on this ISL. A fixed value requir ed by the FSPF pro tocol. lastScn: T ype of the last Sta te Change Notificatio n received on this interface. lastScnTime: T ime the last State Change Notification was received on this interface. upCount: Number ...

  • EMC DS-32B2 - page 228

    1 1-212 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands &dbRetransList: Pointer to the database retransmission list. &lsrRetransList: Pointer to the Link State Records (LSR) retransmi ssion li st. &lsrAckList: Pointer to the Link Stat e Acknowledgem ents (LSA) retransmissio n list. inactTID: Inactivit ...

  • EMC DS-32B2 - page 229

    1 interfaceShow 1-213 T elnet Com mands nInvHlo: Number of in valid Hello fra mes (Hello frames with invalid parameters) r eceived from the neighbor switch. nLsuIn: Number of LSUs received from the neighbor switch. nLsaIn: Number of LSAs received from the neighbor switch. attHloOut: Number of attempte d transm ission s of Hello frame s to the neig ...

  • EMC DS-32B2 - page 230

    1 1-214 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: When no slot number and port number are specified, this command displays the interfac e informatio n for all ports on the swi tch (inclu ding n on E_Ports) . Example T o display FSPF interf ace information: ...

  • EMC DS-32B2 - page 231

    1 interfaceShow 1-215 T elnet Com mands See Al so portShow switchShow ...

  • EMC DS-32B2 - page 232

    1 1-216 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands interopmode Enable or disable switch interoperability with sw itches from other manufa cturers. Syntax interopMode [ mode ] A v ailability Admin Descr iption Use this command to enable or disable inter operability mode for individual sw itches. This feat ure ...

  • EMC DS-32B2 - page 233

    1 inte ro pmo de 1-217 T elnet Com mands Example T o view and then enable inter operability mode: switch:admin> interopmode InteropMode: Off Usage: InteropMode 0|1 0: to turn it off 1: to turn it on switch:admin> interopmode 1 done. Interopmode is enabled. switch:admin> reboot See Al so configure ...

  • EMC DS-32B2 - page 234

    1 1-218 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands iodRes et T u rn off the in-order delivery (IOD) option. Syntax iodReset A v ailability Admin Descr iption Use this comma nd to turn off the IOD option. The IOD optio n is turned off by default. If the IOD o ption was tu rned on usi ng iodSet, this comman d ...

  • EMC DS-32B2 - page 235

    1 iodSet 1-2 19 T elnet Com mands iodSet T urn on in-order deli very op tion. Syntax iodSet A v ailability Admin Descr iption Use this command to enfor ce in -or der delivery of frames during a fabric topology change. In a stable fabric, fr ames are always delivered in order , even when the traffic between switches is shared among mu ltiple paths. ...

  • EMC DS-32B2 - page 236

    1 1-220 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands iodSho w Display th e state of the in-o rder Delivery (IOD) option. Syntax iodShow A v ailability All users Descr iption Use this command to display whetherthe in-order delivery option during topolo gy changes is on o r off. Operands None Example T o display ...

  • EMC DS-32B2 - page 237

    1 ipAdd rSet 1-221 T elnet Com mands ipAddrSet Set Ethernet an d FC IP addr esses. Syntax ipAddrSet [option] A v ailability Admin Descr iption For v4.0 you m ust set values for both logical swit ches and both CP cards in the ED- 1 2000B chassis. Th e option opera nd is available in v4.0. If the option operand is not specified, the command becomes i ...

  • EMC DS-32B2 - page 238

    1 1-222 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ◆ cp0 = hos tname cp0, i p 10.77 .77.75, subnet 255.0. 0.0, g ateway 0.0. 0.0 ◆ cp1 = hos tname cp1, i p 10.77 .77.74, subnet 255.0. 0.0, g ateway 0.0. 0.0 After each pr ompt the curr ent value is shown. Y ou may: ◆ Press R ETU RN to r etain the curren ...

  • EMC DS-32B2 - page 239

    1 ipAdd rSet 1-223 T elnet Com mands Example T o set the IP address details f or log ical switch number 1: switch:admin> ipAddrSet 1 Ethernet IP Address [0.0.0.0]: 192.168 .166.148 Ethernet Subnetmask [0.0.0.0]: 255.255 .255.0 Fibre Channel IP Address [0.0.0.0]: 19 2.168.58.135 Fibre Channel Subnetmask [0.0.0.0]: 19 2.168.166.134 Committing conf ...

  • EMC DS-32B2 - page 240

    1 1-224 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ipAddrSho w Display ethernet and FC IP addres ses. Syntax ipAddrShow [ option ] A v ailability All users Descr iption In an ED-12000 B, this command shows the Ethernet IP Address, Ethernet Subnetmask, Fibr e Channel IP Addr es s and Fib re Chan nel Subnetmas ...

  • EMC DS-32B2 - page 241

    1 ipAdd rSho w 1-2 25 T elnet Com mands Operands This command has the f ollowing operand: Example T o display the IP addresses f or log ical switch number 0: switch12000:admin> ipAddrShow 0 Ethernet IP Address: 192.168.166.147 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: none Fibre Channel Subnetmask: none switch12000:admin> S ...

  • EMC DS-32B2 - page 242

    1 1-226 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands islSho w Display IS L informat ion. Syntax islShow A v ailability All users Descr iption Use this com mand to display the current connections a nd status of the ISL of each port on this swi tch. The followin g informatio n is displayed: ◆ The WWN where the ...

  • EMC DS-32B2 - page 243

    1 license Add 1-2 27 T elnet Com mands licenseAdd Add license key to sw itch. Syntax licenseAdd " license " A v ailability Admin Descr iption Use this com mand to add a license key to a switch. Some featur es of the switch and of the fabric to which it is connected are optional licensed pr o ducts. W ithout a license installed for such pr ...

  • EMC DS-32B2 - page 244

    1 1-228 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands licenseHe lp Display commands used to administer license keys. Syntax licenseHelp A v ailability Admin Descr iption Use this command to display a list of the commands used to administer licen se keys. Operands None Example T o display license comm ands: swit ...

  • EMC DS-32B2 - page 245

    1 licen seIdShow 1-229 T elnet Com mands licenseIdShow Display sy stem license ID. Syntax licenseIdShow A v ailability All users Descr iption Some featur es of the ED-1200 0B and the fabric are optional, licen sed products. W ithout a licen se installed for such products, the services provided by these features ar e n ot available. Other switch pr ...

  • EMC DS-32B2 - page 246

    1 1-230 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands licenseRem o v e Remove the license key from a s witch. Syntax licenseRemove " license " A v ailability Admin Descr iption Use this command to r emove an existing license key fr om a switch. The existing license key must be enter ed exactly as show ...

  • EMC DS-32B2 - page 247

    1 license Show 1-231 T elnet Com mands licenseShow Display current license keys. Syntax licenseShow A v ailability All users Descr iption Use this com mand to display current license keys along with a list of licensed products enabled by these keys; None is d isp layed if no license keys are installed. Operands None Example In this example, the swi ...

  • EMC DS-32B2 - page 248

    1 1-232 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands linkCost Set or print the FSPF co st of a link. Syntax linkCost [slotnumber/][portnumber][, c ost] A v ailability Admin Descr iption Use this comma nd to set or display the cost of an inter-switch lin k (ISL). The cost of a link is a dimensionless positive n ...

  • EMC DS-32B2 - page 249

    1 link Cost 1-233 T elnet Com mands Operands This command has the f ollowing operands:. If no operands ar e specified, the curr ent values for all ports on the switch are disp layed. slotnumber Specify the s lot number in an ED-12000 B switch. Th e slo t nu mb er m ust be f oll ow ed b y a s la sh ( / ) and the port number . This operand is optiona ...

  • EMC DS-32B2 - page 250

    1 1-234 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Examples T o display the cost of a link, and reset the cost: switch:admin> linkCost Slot Interface Cost ------------------------------------- 2 0 500 (STATIC) 2 1 1000 2 2 500 (STATIC) 2 3 200 (STATIC) 2 4 1000 2 5 1000 2 6 1000 2 7 1000 2 8 1000 2 9 1000 ...

  • EMC DS-32B2 - page 251

    1 login 1-2 35 T elnet Com mands log in Log in as a new user . Syntax login A v ailability All users Descr iption Use this com mand to log in to the switch with anothe r username and password, withou t first logging out from the original sess ion. If the user was origin ally conn ected using aT elnet o r rlogin sess ion, that session is left open . ...

  • EMC DS-32B2 - page 252

    1 1-236 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands logout Log out from aT elnet, rlogin, or serial port session. Syntax logout A v ailability All users Descr iption Use this command to log out fr om a T elnet, rlogin, or serial port session. T elnet and rlogin connections ar e closed, the serial port returns ...

  • EMC DS-32B2 - page 253

    1 loopdia gStar t 1-237 T elnet Com mands loopdiagStart Start loopd iag appli cati on. Syntax loopdiagStart port A v ailability Admin Descr iption Use this com mand to start the loopdia g application at the po rt specified. It will isolate the loop device befor e running diagnostics an d re p o r t th e t e s t re su lt . E r ro r /f a i l ur e an ...

  • EMC DS-32B2 - page 254

    1 1-238 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands LSDbShow Display th e FSPF link state d atabase. Syntax LSDbShow [ domain ] A v ailability All users Descr iption Use this command t o display a link sta te databas e recor d for sw itches in the fabric. There are two data structures : the permanently alloca ...

  • EMC DS-32B2 - page 255

    1 LSDb Show 1-239 T elnet Com mands uOutIfs Internal variable. uPathCost Internal variable. uOldHopCount Internal variable. uHopsFromRoot Internal variable. mOutIfs Internal variable. parent Internal variable. mPathCos Internal variable. mHopsFromRoot Internal variable. lsAge Age, in seconds, of this LSR. An LSR is removed fr om the database when i ...

  • EMC DS-32B2 - page 256

    1 1-240 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operand: Example T o display the link state record for the local switch, as indicated b y self k eywor d (the local switch has fou r links in NB_ST_FULL state, three of them connected to switch 5, and one connect ed t ...

  • EMC DS-32B2 - page 257

    1 LSDb Show 1-241 T elnet Com mands Link State Record: Link State Record pointer = 0x1035bb30 lsAge= 138 reserved= 0 type= 1 options= 0x0 lsId= 7 advertiser= 7 incarn= 0x80000217 length= 92 chksum= 0x2fdd linkCnt = 4,flags = 0x0 LinkId = 4, out port = 3, rem port = 2 , cost = 1000, costCnt = 0, type = 1 LinkId = 5, out port = 5, rem port = 5 , cost ...

  • EMC DS-32B2 - page 258

    1 1-242 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands lutil Run the l icense admi nistration utility . Syntax lutil [-h-v][[-i]|[[-a|-r] key ... ]] A v ailability Admin Descr iption Use this command to add, d isplay , and remove license keys. Some featur es of the switch and of the fabric to which it is connect ...

  • EMC DS-32B2 - page 259

    1 lutil 1-2 43 T elnet Com mands See Al so licenseAdd licenseHelp licenseIdShow licenseRemove licenseShow ...

  • EMC DS-32B2 - page 260

    1 1-244 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands mcastShow Display mu lticast routing inform ation. Syntax mcastShow [ group_ID ] A v ailability All users Descr iption Use this com mand to displa y the multicas t routing informatio n, as it is known by the FSPF path selectio n and routing task, for al l po ...

  • EMC DS-32B2 - page 261

    1 mcas tSh o w 1-245 T elnet Com mands Operand This command has the f ollowing operand: Examples T o display multicast rout ing information: switch:admin> mcastShow 9 GroupMember Ports Member ISL Ports S tatic ISL Ports -------------------------------------- -------------------------- 9 0x00002083 0x00002080 0x00000000 0x00000000 0x00000000 0x00 ...

  • EMC DS-32B2 - page 262

    1 1-246 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands memshow Display th e amount of free and used memory in switch. Syntax memshow [ -b | -k | -m ] A v ailability All Users Descr iption Use this command to display fr ee and used memory on the sy stem, as well as the shar ed memory and buf fers used by the kern ...

  • EMC DS-32B2 - page 263

    1 minispropshow 1-247 T elnet Com mands minispr opsho w Display th e properties of the miniswitches. Syntax minispropshow {slot/] minis | {slot] - all A v ailability All users Descr iption Use this command to display the ASIC minis witch properties for the specified minis on the specified bla de slot. Operands This command has the f ollowing operan ...

  • EMC DS-32B2 - page 264

    1 1-248 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o vie w the miniswitch prop er ties on blade 8: switch12k:admin> minispropshow 8 -all Looking for miniS 0 in path: /proc/fab os/blade/8 slot: 8, miniS: 0 [2/16] <0,1657/0001 1,1657/0001> (be,5) (be,4) (be,3) (be,2) (be,1) (be ,0) (bi,55) ( ...

  • EMC DS-32B2 - page 265

    1 minisreg sho w 1-249 T elnet Com mands minisr egsho w Display port registe rs for a specified mini switch. Syntax minisregshow [slot/]mini_switch {filte r} A v ailability All users Descr iption Use this command to display the ASIC register contents for the specified minis witch on the specif ied blade shot. Operands This command has the f ollowin ...

  • EMC DS-32B2 - page 266

    1 1-250 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msCa pabilitySho w Display the man agement server capability . Syntax msCapabilityShow A v ailability All users Descr iption Use this command to query a f abric for the Management Server capability . Based o n the result of t his command, you can then decide ...

  • EMC DS-32B2 - page 267

    1 msCa pa bilityShow 1-251 T elnet Com mands See Al so msPlMgmtActivate msPlMgmtDeactivate msPlatShow msPlClearDB msTdEnable msTdDisable msTdReadConfig ...

  • EMC DS-32B2 - page 268

    1 1-252 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msConf igure Confi gur e the Ma nagem ent Serv er . Syntax msConfigure A v ailability Admin Descr iption Use this command to display and configure parameters used to access the Management Se rver . The Management Server allows an enterprise stora ge network ...

  • EMC DS-32B2 - page 269

    1 msConfigure 1-253 T elnet Com mands Example T o display the Management Ser ver access cont rol list: switch:admin> msConfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node W WN select : (0..3) [1] MS Access List consists of (5): { 20:01:00:60:69:00:60:10 20:02:00:60:69:00:60:10 ...

  • EMC DS-32B2 - page 270

    1 1-254 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msPla tShow Display the Ma nagement Server platform database. Syntax msPlatShow A v ailability Admin Descr iption Use this comma nd to display the Managem ent Server platform database. It displays the platform name and a ssociated attributes of each platform ...

  • EMC DS-32B2 - page 271

    1 msPlClearDB 1-255 T elnet Com mands msPlClearDB Clear the Management Server platf orm database on all switches in the fabric. Syntax msPlClearDB A v ailability Admin Descr iption Use this command to clear the entire Management Server platform database on all switches in the fabr ic. Since this operation is non-r ecoverable (once issued, the datab ...

  • EMC DS-32B2 - page 272

    1 1-256 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msPlMgmtA ctiv ate Activate the Platform Database Management service on a ll switches in the fabric. Syntax msPlMgmtActivate A v ailability Admin Descr iption Use this command to activate the Management Se rver Platform Database Management Service on all swi ...

  • EMC DS-32B2 - page 273

    1 msPlMgmtDeac tiv ate 1-2 57 T elnet Com mands msPlMgmtD eactiv ate Deactivates the Platform D atabase Management service on all switches in th e fabric. Syntax msPlMgmtDeactivate A v ailability Admin Descr iption Use this command to deactivate the Platform Database Man agement service. This command deactivates the Pl atform Database Management se ...

  • EMC DS-32B2 - page 274

    1 1-258 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msTDDisa ble Disable the Management Server T opology Discovery Management service. Syntax msTdDisable ["ALL"] A v ailability Admin Descr iption Use this command to disable the Management Server T opology Discovery Mana gement Service local ly or fa ...

  • EMC DS-32B2 - page 275

    1 msTDEna ble 1-259 T elnet Com mands msTDEnable Enable the Managemen t Server T o pology Dis covery Managemen t service. Syntax msTdEnable ["ALL"] A v ailability Admin Descr iption Use this command to enable the Management Server T opology Discovery Mana gement Service local ly or fabric-wide. This comma nd enables the T opolo gy Discove ...

  • EMC DS-32B2 - page 276

    1 1-260 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands msTDReadCo nfig Display th e status of Man agement Server T opolo gy Discovery service. Syntax msTdReadConfig A v ailability All users Descr iption Use this command to check whether the Man agement Server T o pology Disco very service is enabled. Operands No ...

  • EMC DS-32B2 - page 277

    1 myid 1-2 61 T elnet Com mands my i d Display th e current login session deta ils. Syntax myid A v ailability Admin Descr iption Use this comma nd to display the status of th e system and the login session details. The status sho ws wheth er the sys tem is Red undan t, Non-Re dund ant, or U nknow n. The login sessi on gives details o f the followi ...

  • EMC DS-32B2 - page 278

    1 1-262 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands nbrStatsClear Reset FSPF in terface counters. Syntax nbrStatsClear [slotnumber/][portnumber ] A v ailability All users Descr iption Use this com mand to reset the counters of FSPF fram es transmitted and rece ived on an i nterf ace. Use this comm and with no ...

  • EMC DS-32B2 - page 279

    1 nbrStatsC lear 1-263 T elnet Com mands Example T o display how to reset the count ers on por t 4: switch:admin> nbrstatsclear 1/4 See Al so interfaceShow portShow switchShow ...

  • EMC DS-32B2 - page 280

    1 1-264 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands nbrStateShow Display FS PF neighbor ’ s state. Syntax nbrStateShow [slotnumber/][portnumber] A v ailability All users Descr iption Use this com mand to displa y information a bout neigh bors to the local switch , or informatio n about a specific nei ghbor ...

  • EMC DS-32B2 - page 281

    1 nbrStateShow 1-265 T elnet Com mands Operands This command has the f ollowing operands: Example T o display information about switches directly connected to the lo cal switch: switch:admin> nbrStateShow 2/0 Local Domain ID: 15 Local Port Domain Remote Port State -------------------------------------- ---------------- - 2 13 13 NB_ST_FULL 6 13 ...

  • EMC DS-32B2 - page 282

    1 1-266 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands nsAllSho w Display glo bal Name Server informa tion. Syntax nsAllShow [ type ] A v ailability All users Descr iption Use this com mand to displa y the 24-bit Fibre Channel addresses o f all devices in all switches in the fabric. If the oper and type is suppl ...

  • EMC DS-32B2 - page 283

    1 nsAllShow 1-267 T elnet Com mands See Al so nsShow switchShow ...

  • EMC DS-32B2 - page 284

    1 1-268 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands nsSho w Display lo cal Name Server inf ormatio n. Syntax nsShow A v ailability All users Descr iption Use this com mand to display lo cal Name Server info rmation, including inf ormation a bout devices conn ected to this switch , and cached information about ...

  • EMC DS-32B2 - page 285

    1 nsShow 1-269 T elnet Com mands There may be additional lines if the device has registered any of the following i nformati on (the switch a utomatica lly registers SCSI inquiry data for FCP target devices): ◆ FC4s supported ◆ IP addres s ◆ IP A ◆ Por t and no de s ymboli c name s ◆ Fabric port name ◆ Hard ad dres s and/or port IP addre ...

  • EMC DS-32B2 - page 286

    1 1-270 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands passwd Change syst em login name and pas sword. Syntax passwd [-o] ["user"] A v ailability All users Descr iption Use th is comma nd to change the s ystem pass words. The l ogin names cannot be modified in v4. 0. T o change the passwor d for a spec ...

  • EMC DS-32B2 - page 287

    1 passwd 1-271 T elnet Com mands Use the follow ing options to control input: Operands This command has the f ollowing operands: Example T o change the admin user name and passw ord: switch:admin> passwd "admin" Changing password for admin Enter new password: ******** Re-type new password: ******** Password changed. Saving password to ...

  • EMC DS-32B2 - page 288

    1 1-272 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Error s All error messages are pr eceded by the command n ame with one of the messa ges appende d as shown in T able 1- 19: See Als o login logout Ta b l e 1 - 1 9 Err or Messages Error Message Descrip tion User is not a valid user name. Y ou have not specif ...

  • EMC DS-32B2 - page 289

    1 perf AddE EMoni tor 1-273 T elnet Com mands perfAddEEMo nitor Add e nd- to -end moni tor to a port . Syntax perfAddEEMonitor [slotnumber/]portnumb er, "SourceID", "DestID" A v ailability Admin Descr iption Use this command to add an end-to-end m onitor to a port. The monitor counts the number of wor ds received, n umber of wor ...

  • EMC DS-32B2 - page 290

    1 1-274 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands After a successf ul execution of this command, a monitor number is displayed. The monitor number is pr ovided for eas y manipulation of these performance monitors. This comm and r equir es a Pe rformance Monitoring license. Operands This command has the f ol ...

  • EMC DS-32B2 - page 291

    1 perf AddE EMoni tor 1-275 T elnet Com mands Example T o add an end-to-end monitor to blade 7, pot 2: switch:admin> perfAddEEMonitor 7/2, "0 x058e0f", "0x1182ef" End-to-End monitor number 0 added. switch:admin> See Al so perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWrit ...

  • EMC DS-32B2 - page 292

    1 1-276 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddIPMonitor Add a filt er-bas ed monitor for IP frame count. Syntax perfAddIPMonitor [slotnumber/]portnumb er[, "alias"] A v ailability Admin Descr iption Use thi s command to define filter-based monitors to count the number of IP traf fic fra ...

  • EMC DS-32B2 - page 293

    1 perf AddI PMoni tor 1-277 T elnet Com mands Example T o add an IP monitor to blade 2, port 4: switch:admin> perfAddIPMonitor 2/4, 2 IP traffic frame monitor #0 added switch:admin> See Al so perfAddEEMonitor perfAddReadMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWriteMonitor portnumber Specify the port number where ...

  • EMC DS-32B2 - page 294

    1 1-278 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddReadMo nitor Add a filt er-bas ed monitor fo r the SCSI Read command. Syntax p erfAddReadMonitor [slotnumber/]portnumb er[, "alias"] A v ailability Admin Descr iption Use thi s command to define filter-based monitors to count the number of S ...

  • EMC DS-32B2 - page 295

    1 perfAddR eadMo nitor 1-2 79 T elnet Com mands Example T o add a SCSI Read monitor to port 2: switch:admin> perfAddReadMonitor 2/4, 2 SCSI Read filter monitor #2 added switch:admin> See Al so perfAddEEMonitor perfAddIPMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWriteMonitor portnumber Specify the port number wher e ...

  • EMC DS-32B2 - page 296

    1 1-280 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddRWMonitor Add a moni tor for the SCSI Read an d W rite commands. Syntax perfAddRWMonitor [slotnumber/]portnumb er[, "alias"] A v ailability Admin Descr iption Use thi s command to define filter-based monitors to count the number of SCSI FCP ...

  • EMC DS-32B2 - page 297

    1 perf AddRWM onit or 1-281 T elnet Com mands Example T o add a SCSI Read and Write monitor to blade 2, port 4: switch:admin> perfAddRWMonitor 2/4 SCSI Read/Write monitor #1 is added switch:admin> See Al so perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWriteMonitor portnumber Specify the por ...

  • EMC DS-32B2 - page 298

    1 1-282 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddSCSI Monitor Add a monitor fo r SCSI frame count. Syntax perfAddSCSIMonitor [slotnumber/]portnu mber[, "alias"] A v ailability Admin Descr iption Use thi s command to define filter-based monitors to count the number of SCSI traf fic frames. ...

  • EMC DS-32B2 - page 299

    1 per fAdd SCSI Moni tor 1-283 T elnet Com mands Example T o add a SCSI traffic f rame monitor to blade 2, port 4: switch:admin> perfAddSCSIMonitor 2/4 SCSI traffic frame monitor #0 added switch:admin> See Al so perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor perfAddUserMonitor perfAddWriteMonitor portnumber Specify the ...

  • EMC DS-32B2 - page 300

    1 1-284 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddUserMonitor Add a user -defined filter-ba sed monitor . Syntax perfAddUserMonitor [slotnumber/]portnu mber, "grouplist"[,"alias"] A v ailability Admin Descr iption Use this com mand to define a special mechanis m to qualify frames ...

  • EMC DS-32B2 - page 301

    1 perfAd dUserMo nitor 1-2 85 T elnet Com mands Operands This command has the f ollowing operands: slotnumber Specify the slot number in an ED-120 00B switch . The slot numb er must be follo wed by a slash ( / ) and the port number . The ED- 12000 B has a t otal o f 10 s lots cou nted from 1 to 10. Slot number 5 and 6 are con tro l pro cessor cards ...

  • EMC DS-32B2 - page 302

    1 1-286 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands grouplist Specify up to 6 sets of Offset, M ask, and V alueList separated by a semicolo n (;). The entire grouplist operand must be enclosed in quotation marks. This operand is required. The grouplist operand must be specified in the follow ing fo rmat: &quo ...

  • EMC DS-32B2 - page 303

    1 perfAd dUserMo nitor 1-2 87 T elnet Com mands Example T o add a filter based monitor f or all Extended Link Service request (R_CTL=0x22 and TYPE=0x01) to blade 2, p ort 4: switch:admin> perfAddUserMonitor 2/4, "4, 0xff, 0x22; 12, 0xff, 0x01" User monitor #0 added switch:admin> As a special case, to add a f ilter -based monitor for ...

  • EMC DS-32B2 - page 304

    1 1-288 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfAddWriteMonitor Add a filter -based moni tor for the SCSI W rite command. Syntax perfAddWriteMonitor [slotnumber/]portn umber[, "alias"] A v ailability Admin Descr iption Use thi s command to define filter-based monitors to count the number of ...

  • EMC DS-32B2 - page 305

    1 perfAddWr iteMo nitor 1-289 T elnet Com mands Example T o add a SCSI Write command monitor to blade 2, port 4: switch:admin> perfAddWriteMonitor 2/4 SCSI Write filter monitor #0 added switch:admin> See Al so perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor portnumber Specify the por ...

  • EMC DS-32B2 - page 306

    1 1-290 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfCfgCle ar Clear the pr eviously saved performance monitoring configuration settin gs fro m flash memory . Syntax perfCfgClear A v ailability Admin Descr iption Use this command to clear the pr eviously saved end-to-end and filter configuratio n setting s ...

  • EMC DS-32B2 - page 307

    1 perfCfgR estore 1-2 91 T elnet Com mands perfCfgRe store Restore performance monitoring configuration setting s fro m flash memory . Syntax perfCfgRestore A v ailability Admin Descr iption Use this comma nd to restor e the performance monito ring configuratio n informatio n from flash memo ry . This comm and r equir es a Pe rformance Monitoring l ...

  • EMC DS-32B2 - page 308

    1 1-292 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfCfgSa v e Save performance m onitoring configuration settings to flash mem ory . Syntax perfCfgSave A v ailability Admin Descr iption Use this command to save the curr ent end-to-en d and filter configuratio n setting s (data structures) of perform ance ...

  • EMC DS-32B2 - page 309

    1 perfC lrAlpa Crc 1-293 T elnet Com mands perfClrAlpaCr c Clear an ALP A device ’ s CRC count by the port and ALP A. Syntax perfClrAlpaCrc [slotnumber/]portnumber [, ALPA] A v ailability Admin Descr iption Use this command to clear specific ALP A device's CRC er ror counter . If the ALP A is provided as an operand, only the counters fo r th ...

  • EMC DS-32B2 - page 310

    1 1-294 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o c lear CRC count on a particular ALP A on port 15, and then clear CRC count for a ll ALP As on blade 2, port 15: switch:admin> perfClrAlpaCrc 2/15, 0x5 9 CRC error count at ALPA 0x59 on port 1 5 is cleared. switch:admin> switch:admin> pe ...

  • EMC DS-32B2 - page 311

    1 per fDel EEMon itor 1-295 T elnet Com mands perfDelEEMonitor Delete an end-to-end mo nitor on port. Syntax perfDelEEMonitor [slotnumber/]portnumb er[, monitorId] A v ailability Admin Descr iption Use this command to dele te an end-to-end monitor o n a port. This comm and r equir es a Pe rformance Monitoring license. Operands This command has the ...

  • EMC DS-32B2 - page 312

    1 1-296 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o delete an end-to-end monitor on blade 7, port 2: switch:admin> perfDelEE Monitor 7/2, 5 End-to-End monitor number 5 deleted switch:admin> See Als o perfShowEEMonitor perfAddEEMonitor ...

  • EMC DS-32B2 - page 313

    1 perfD elFilterM onitor 1-2 97 T elnet Com mands perfDelFilterMonitor Delete a filter-based monitor . Syntax perfDelFilterMonitor [slotnumber/]port number[, monitorId] A v ailability Admin Descr iption Use this comma nd to delete a filter-based monitor . After a successful execution of this comman d, the telnet shell confirms tha t this monito r h ...

  • EMC DS-32B2 - page 314

    1 1-298 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o delete f ilter monitor 4 on blade 2, port 3: switch:admin> perfDelFilterMonitor 2/3 , 4 The specified filter-based monitor is deleted. switch:admin> See Als o perfShowFilterMonitor perfAddUserMonitor portnumber Specify the port number where ...

  • EMC DS-32B2 - page 315

    1 perfHelp 1-299 T elnet Com mands perfHelp Display performa nce monito ring help in formation. Syntax perfHelp A v ailability All users Descr iption Use this comma nd to display the available performa nce monitoring help co mman ds. This comm and r equir es a Pe rformance Monitoring license. Operands None Example T o display commands related to pe ...

  • EMC DS-32B2 - page 316

    1 1-300 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfSetP or tEEMask Set overall mask for end-to-end (EE) monitors. Syntax perfSetPortEEMask [slotnumber/]portnum ber, "TxSIDMsk","TxDIDMsk","RxSIDMsk","RxDI DMsk" A v ailability Admin Descr iption Use this comma nd to ...

  • EMC DS-32B2 - page 317

    1 perfSe tP or tEEMask 1-301 T elnet Com mands Operands This command has the f ollowing operands: slotnumber Specify the s lot number in an ED-120 00B switch. The slot n umber must be follow ed by a slash ( / ) and the port number . The ED- 12000B ha s a total of 10 slots counte d from 1 to 10. Slot number 5 and 6 ar e contr ol process or card s, a ...

  • EMC DS-32B2 - page 318

    1 1-302 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o set the o v erall mask f or end-to-end monitors on blade 2, port 4: switch:admin> perfSetPortEEMask 2/4, " 00:00:00", "ff:ff:ff", "00:00:ff ", "ff:00:00" The EE mask on port 6 is set and EE co unters are ...

  • EMC DS-32B2 - page 319

    1 perfShowAlpaCrc 1-303 T elnet Com mands perfSho wAlpaCrc Display the ALP A CRC count by port or by ALP A. Syntax perfShowAlpaCrc [slotnumber/]portnumbe r[, ALPA] A v ailability Admin Descr iption Use this command t o display a s pecific ALP A device CRC error count by the port or ALP A . If the AL P A opera nd is specified, only the CRC count for ...

  • EMC DS-32B2 - page 320

    1 1-304 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display the CRC err or count f or all ALP A devices on blade 2, port 4: switch:admin> perfShowAlpaCrc 2/4 AL_PA CRC count ------------------- 0x01 0 switch:admin> See Als o perfClrAlpaCrc portnumber Specify the port number where you want to ...

  • EMC DS-32B2 - page 321

    1 perf Sho w EEMon itor 1-305 T elnet Com mands perfSho wEEMonitor Display end- to-end monito r information and frame tra ffic on a port. Syntax perfShowEEMonitor [slotnumber/]portnum ber[, interval] A v ailability Admin Descr iption Use this comma nd to display end-to-end monito r information and frame traf fic on a port . This com mand can disp l ...

  • EMC DS-32B2 - page 322

    1 1-306 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: slotnumber Specify the s lot number in an ED-120 00B switch. The slot number must be followed by a slash ( / ) and the port n umber . The ED- 12000B ha s a total of 10 slots counte d from 1 to 10. Slot numbe ...

  • EMC DS-32B2 - page 323

    1 perf Sho w EEMon itor 1-307 T elnet Com mands Example T o display end to end monitor frame tra ffic on b l ade 4 , p or t 5 a t an inter va l of ev er y 6 seconds: switch:admin> perfShowEEMonitor 4/5, 6 perfShowEEMonitor 4 1: Tx/Rx are # of bytes and crc is # of crc errors 0 1 2 3 4 ------------ ------------- ------------- ------------- ------ ...

  • EMC DS-32B2 - page 324

    1 1-308 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands perfSho wFilterMonitor Display filter-based mo nitor informa tion and f rame traffic for a port. Syntax perfShowFilterMonitor [slotnumber/]portnumber[, interval] A v ailability Admin Descr iption Use this com mand to display al l the filter-based monitors de ...

  • EMC DS-32B2 - page 325

    1 perfShowFilterMo nitor 1-3 09 T elnet Com mands Operands This command has the f ollowing operand: slotnumber Specify the s lot number in an ED-120 00B switch. The slot n umber must be follow ed by a slash ( / ) and the port number . The ED- 12000B ha s a total of 10 slots counte d from 1 to 10. Slot number 5 and 6 ar e contr ol process or card s, ...

  • EMC DS-32B2 - page 326

    1 1-310 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display f ilter monitor traf fic on blade 2, port 5 at an inter va l of ev er y 6 seconds: switch:admin> perfshowfiltermonitor 2/ 5, 6 perfShowFilterMonitor 5 1 0 1 2 3 4 5 6 #Frames #CMDs #CMDs #Frames # Frames #CMDs #CMDs ------------------- ...

  • EMC DS-32B2 - page 327

    1 perfShowP or tEEMask 1-311 T elnet Com mands perfSho wPortEEMask Displays the curren t end-to-end mask of a port. Syntax perfShowPortEEMask [slotnumber/]portnu mber A v ailability Admin Descr iption Use this comma nd to display the current end-to-end mask of a port. There ar e only two commands that can modify the value of EE mask: perfSetPortEEM ...

  • EMC DS-32B2 - page 328

    1 1-312 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: Example T o display the port end-to-end mask on blade 2, port 4: switch:admin> perfShowPortEEMask 2/4 TxSID Domain: on TxSID Area: on TxSID ALPA: off TxDID Domain: on TxDID Area: on TxDID ALPA: off RxSID ...

  • EMC DS-32B2 - page 329

    1 po rtCf gE po rt 1-313 T elnet Com mands portCfgEport Enable or disable a port fr o m becoming an E_Port. Syntax portCfgEport [slotnumber/]portnumber, mode A v ailability Admin Descr iption This comma nd allows a user to enable/dis able a port from becoming an E_Port. The E_Port ca pability is ena bled by default unl ess this command is used to d ...

  • EMC DS-32B2 - page 330

    1 1-314 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands When no operands a re specified, the command reports a list of ports that ar e disabled fro m becoming E_Ports. Example T o disable blade 2 port 3 from becoming an E_Port: switch:admin> portCfgEport 2/3, 0 Committing configuration...done. switch:admin> ...

  • EMC DS-32B2 - page 331

    1 po rtCf gG po rt 1-315 T elnet Com mands portCfgGpor t Designates a port as a locked G_Port. Syntax portCfgEport [slotnumber/]portnumber, mode A v ailability Admin Descr iption This command enables a user to d esignate a port as a locked G_Port. Once this is done, the swi tch attempts to initi alize that port as an F_Port onl y , and do es not at ...

  • EMC DS-32B2 - page 332

    1 1-316 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example The follo wing exa mple configur es sblade 2, port 3 as a lock ed G_Po rt: switch:admin> portCfgGport 2/3, 1 done. See Als o portShow switchShow configure portCfgShow portnumber Specify the port number to be configured. V alid values for port numb ...

  • EMC DS-32B2 - page 333

    1 portCfgLon gDist ance 1-317 T elnet Com mands por tCfgLongDistance Configure a port to support lon g distance link s. Syntax portCfgLongDistance [slot/]port [, dis tance_level] [, VC_translation_link_init] A v ailability Admin Descr iption Use this com mand to specify the a llocation of enough full -size frame buffers o n a particular port to sup ...

  • EMC DS-32B2 - page 334

    1 1-318 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands level 1 long distance, and long f or level 2 long distan ce. In the switchShow output, the format is Lx , where x is the long distance level number , except for level 0, which is not displa yed in switchShow . Operands This command has the f ollowing operand ...

  • EMC DS-32B2 - page 335

    1 portCfgLon gDist ance 1-319 T elnet Com mands Limitations Since the total number of frame buf fers is limited in quad, when one of the ports in the quad is configured as a long distan ce port, all remaining ports must be level zero ports onl y (that is, none of the remaining ports in the quad can be a long distan ce port). Further more, if one po ...

  • EMC DS-32B2 - page 336

    1 1-320 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portCfgLpor t Lock a port as an L_PO R T . Syntax portCfgLport [slotnumber/]portnumber, lockmode[, privatemode] A v ailability Admin Descr iption Use this command t o designate a port as an L_PORT . The swi tch will then only attempt to initialize tha t port ...

  • EMC DS-32B2 - page 337

    1 po rtCf gL po rt 1-321 T elnet Com mands Example T o configure switch blade 2 port 3 as a lock ed L_POR T: switch:admin> portCfgLport 2/3, 1 done. See Al so portShow switchShow configure lockmode Specify 1 to configur e the specified port as a locked L_POR T . Specify 0 to de-configure the specified port from its previous r ole as a locked L_P ...

  • EMC DS-32B2 - page 338

    1 1-322 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portcfgMcastLoopbac k Configure a port to receive multicast frames. Syntax portCfgMcastLoopback port , mode A v ailability Admin Descr iption Use this comma nd to configure a port to receive multicast frames. This command allows a user to dedicate a n unused ...

  • EMC DS-32B2 - page 339

    1 por tcfgMcastLoo pback 1-323 T elnet Com mands ◆ The comment field of switchShow will show th at it is looped ba ck to itself like so: port 3: sw No_Light Loopback->3 ◆ The portFlags lin e of portShow will di splay the F_P ORT and INT_LB flags l ike so: portFlags: 0x20249 PRESENT F_PORT U_PORT INT_LB LED ◆ mcastShow will show the port as ...

  • EMC DS-32B2 - page 340

    1 1-324 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portCfgSho w Display port co nfigurati on settings. Syntax portCfgShow [slotnumber/][portnumber] A v ailability All users Descr iption Use this com mand to display the current configu ration of all ports. The follow ing config uration info rmation is d ispla ...

  • EMC DS-32B2 - page 341

    1 portC fgShow 1-325 T elnet Com mands Operands This command h as the following operands: Example T o display the configuration settings of port 5 on blade 7 on a v4.0 switch: switch:admin> portCfgShow 7/15 Area Number: 15 Speed Level: AUTO Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF M ...

  • EMC DS-32B2 - page 342

    1 1-326 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portCfgSpeed Configure the port speed level. Syntax portCfgSpeed [slotnumber/]portnumber, speed_level A v ailability Admin Descr iption Use this command to configur e the speed of a port to a particular level. After this command is issued, the port is disabl ...

  • EMC DS-32B2 - page 343

    1 portC fgSpeed 1-327 T elnet Com mands Example T o configure the speed of blade 2, p ort 5 to 2 Gb/s: switch:admin> portCfgSpeed 2/5, 2 done. See Al so switchCfgSpeed portShow speed_level Specify the speed of a port. Th is operand is optional. V alid values are one of the follow ing: 0 Auto-sensin g mode. The port autom atically configures for ...

  • EMC DS-32B2 - page 344

    1 1-328 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portCfgT runkpor t Configure a port to be enabled or disabled for trunkin g. Syntax portCfgTrunkport [slotnumber/]portnumb er, mode A v ailability Admin Descr iption Use this command to configur e a port to be enabled or disabled fo r trunking. This comm and ...

  • EMC DS-32B2 - page 345

    1 po rt Cf gT run k po rt 1-329 T elnet Com mands Example T o enable blade 2, port 5 for trunking: switch:admin> portCfgTrunkport 2/5, 1 done. See Al so switchCfgTrunk portShow portCfgShow switchShow ...

  • EMC DS-32B2 - page 346

    1 1-330 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portDisable Disab le a sw itch port. Syntax portDisable [slotnumber/]portnumber A v ailability Admin Descr iption Use this comma nd to disable a switch port . If the port is connected to another switch, the fabric may reconfigure. If the port is connected to ...

  • EMC DS-32B2 - page 347

    1 portD isab le 1-331 T elnet Com mands Example T o disable blade 2, port 4: switch:admin> portDisable 2/4 switch:admin See Al so portEnable portShow switchShow ...

  • EMC DS-32B2 - page 348

    1 1-332 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portEnable Enable a switch port. Syntax portEnable [slotnumber/]portnumber A v ailability Admin Descr iption Use this command to enable a switch port. If the port is connected to another switch, the fabric may reconfigure. If the port is connected to one or ...

  • EMC DS-32B2 - page 349

    1 portEn ab le 1-333 T elnet Com mands Example T o enable port 4: switch:admin> portEnable 2/4 switch:admin See Al so portDisable portShow switchShow ...

  • EMC DS-32B2 - page 350

    1 1-334 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands por tErrShow Display port error summary . Syntax portErrShow A v ailability All users Descr iption Use this command to display an err o r summary for all ports . The display contains one output line per port and shows err or counters in ones, thousa nds (K), ...

  • EMC DS-32B2 - page 351

    1 portErr Show 1-335 T elnet Com mands Example The following example shows an eight-port switch. Notice in the example below that port six has a high n umber of error s and should be examined: switch:admin> portErrShow frames enc crc too too bad enc di sc link loss loss frjt fbsy tx rx in err shrt long eof out c 3 fail sync sig ----------------- ...

  • EMC DS-32B2 - page 352

    1 1-336 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portLEDT est Exercise the user port LEDs. Syntax portLEDTest [-npass count | -port port list ] A v ailability Admin Descr iption Use this command to exer cise the LEDs on a switch blade. This command fla shes the sw itch User Ports L EDs on and o ff by setti ...

  • EMC DS-32B2 - page 353

    1 por tLogClear 1-3 37 T elnet Com mands portLogClear Clear the port log. Syntax portLogClear A v ailability Admin Descr iption Use this command to clear the port log . Y ou may want to clear the port log before triggering an activity so that the log displa ys only the activity related to that activity . See portLogShow for a description of the por ...

  • EMC DS-32B2 - page 354

    1 1-338 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portLogDump Display th e port log withou t page breaks. Syntax portLogDump [count[, saved[, portid]]] A v ailability All users Descr iption Use this com mand to displ ay the port log, listin g all entries in the log without page breaks. This com mand display ...

  • EMC DS-32B2 - page 355

    1 por tLogDump 1-3 39 T elnet Com mands Example T o display the port log: switch:admin> portlogdump 10 May 1 task event port c md args -------------------------------------- -------- 16:51:15.499 tShell ioctl 7 de 10f9bb90,0 16:51:15.499 tShell ioctl 8 de 10f9bb90,0 16:51:15.499 tShell ioctl 9 de 10f9bb90,0 16:51:15.499 tShell ioctl 10 de 10f9bb ...

  • EMC DS-32B2 - page 356

    1 1-340 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portLogShow Display th e port log. Syntax portLogShow [ count [, saved, portid ]] A v ailability All users Descr iption Use this com mand to display th e port log; 22 entries are displayed at a time . The portLogShow command displays the sa me informatio n a ...

  • EMC DS-32B2 - page 357

    1 portLo gS ho w 1-341 T elnet Com mands Event Possible e vents are: star t disa b le enable ioct Tx Rx scn pst ate rejec bus y ctin ctout errlo g loopscn create deb ug nbr fsm sn fcin fcout read write err frame nsRe mQ rscn xalloc xfree xer r xstate pa yl oad switch start or re-star t event por t is disabled por t is enabled lpor t I/O control i s ...

  • EMC DS-32B2 - page 358

    1 1-342 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Cmd Command value descr iption depends on event type: ioctl Tx & Rx scn pst ate ctin ctout errlo g loopscn debug message frame payload size new state (see state c odes below) new physical state. Refer to T able 1-24 for a list of pstate code values. CT - ...

  • EMC DS-32B2 - page 359

    1 portLo gS ho w 1-343 T elnet Com mands Args The command arguments descripti on depends on event type: star t ioct Tx & Rx rejec t busyFC-PH busy reason ctin ctout errlog loopscn star t type: 0 = enable por ts, 100 = disable por ts disablestate can be one o f the following: 1 - Online, 2 - Offline, 3 - T esting, 4 - Faulty , 5 - E_Port, 6 - F_ ...

  • EMC DS-32B2 - page 360

    1 1-344 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Ta b l e 1 - 2 3 Stat e Codes State Code Description 1 Online 2 Offline 3 Te s t i n g 4 Fa u l t y 5 E_P or t 6 F_Por t 7 Segmented Ta b l e 1 - 2 4 Pstate Codes Pstate Code Description LR1 Link Reset: L R T ran smit State LR2 Link Reset: L R Receive State ...

  • EMC DS-32B2 - page 361

    1 portLo gS ho w 1-345 T elnet Com mands Ta b l e 1 - 2 6 Lip Reason Codes Ta b l e 1 - 2 5 Speed Negotiation States Speed Negotiation State Descriptio n ITIT star t negoti ation NM negotiate ma ster WS wait for signal NF negotiation follow NC negotiation c omplete LIP Reason Co de Description 8001 Retr y loop init 8002 Star t loop after gai ning s ...

  • EMC DS-32B2 - page 362

    1 1-346 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: Example The followi ng example show s a section of the port log with an E_Port coming online. The ELP and EFP exchanges ar e shown; a name service r equest was processed. switch:admin> portLogShow 24 time ...

  • EMC DS-32B2 - page 363

    1 portLo gS ho w 1-347 T elnet Com mands 17:05:31.775 PORT Tx 2 40 02fffffd,00fffffd,0e08ffff,1 4000000 17:05:31.775 PORT debug 2 00c0ffee,00fd015c,14000000,0 0000001 17:05:31.777 PORT Rx 2 0 c0fffffd,00fffffd,0e080907 17:05:31.778 PORT Tx 3 40 02fffffd,00fffffd,0e09ffff,1 4000000 17:05:31.779 PORT debug 3 00c0ffee,00fd015e,14000000,0 0000001 17:05 ...

  • EMC DS-32B2 - page 364

    1 1-348 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portLoopbac kT est Run fun ctio na l te st of por t N- >N pa th. Syntax portLoopbackTest [ passCount ] A v ailability Admin Descr iption Use this command to verify the functional operation of the switch by sending frames fr om the port N transmitter , and ...

  • EMC DS-32B2 - page 365

    1 por tLoop backT es t 1-349 T elnet Com mands At each pass, the f rame is cr eated fr om a dif ferent d ata type. If seven passes ar e req uested, seven differ ent data types ar e us ed in the test. If eight passes ar e requested, th e first seven frames use unique data types, and the eighth is the sa me as the first. The seven data types are: Bec ...

  • EMC DS-32B2 - page 366

    1 1-350 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands See Als o ramTest portRegTest centralMemoryTest cmiTest sramRetentionTest turboRamTest camTest statsTest filterTest spinSilk ...

  • EMC DS-32B2 - page 367

    1 portPerf Show 1-351 T elnet Com mands portPerfSho w Display port throughput perform ance in bytes, kilobytes, or megabyte s. Syntax portPerfShow [ interval ] A v ailability All users Descr iption Use this command to display throughput informat ion for all ports on the switch (8 or 16 colum ns depending o n the switch model) . One output line is d ...

  • EMC DS-32B2 - page 368

    1 1-352 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portRegT est Bit write/read test of th e ASIC SRAMs a nd registers. Syntax portRegT est [-ports list][-skiptests mask] A v ailability Admin Descr iption Use this command to verify that SRAM and register data bits in each ASIC can be indep endently writt en a ...

  • EMC DS-32B2 - page 369

    1 portRegT est 1-353 T elnet Com mands Operands This command has the f ollowing operands: Example T o r un bit write/read test of the ASIC SRAMs and register s: switch:admin> portRegTest Running Port Register Test .... passed . Error s Below are possible error messages if failures are detected: 0x20 BUS_TIMEOUT 0x21 REGERR 0x22 REGERR_UNRST See ...

  • EMC DS-32B2 - page 370

    1 1-354 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portRouteShow Display routing tables f or a port. Syntax portRouteShow [slotnumber/]portnumber A v ailability All users Descr iption Use this command to display the port address ID and the contents of the port ro uting tables as shownin T able 1-27: Ta b l e ...

  • EMC DS-32B2 - page 371

    1 portRou teShow 1-355 T elnet Com mands Multicast routing table Shows mult icast fram e routing to the desti nation multicast group. Output format is: mcast_group_number: (mcast_group_id) ports_bitmap wher e mcast_group_number is the multicast group numb er . mcast_group_id is the multicast fr ame destinati on ID. ports_bitmap i s a h e x b i t m ...

  • EMC DS-32B2 - page 372

    1 1-356 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands This command has the f ollowing operands: Example T o display the port routing tables f or blade 4, port 15: switch:admin> portRouteShow 4/15 port address ID: 0x02bf00 external unicast routing table: 1: 0x4 (vc=3) 2: 0x10000 (vc=0) internal unica ...

  • EMC DS-32B2 - page 373

    1 por tShow 1-357 T elnet Com mands portShow Display port s tatus. Syntax portShow [slotnumber/]portnumber A v ailability All users Descr iption Use this com mand to display sta tus info rmation for a po rt. Information varies with the switch model and port type. The display is shown in T able 1-2 8: Ta b l e 1 - 2 8 PortShow Display Fields Field D ...

  • EMC DS-32B2 - page 374

    1 1-358 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands portRegs Addres s of the port hardw are r egisters. portData Addres s of the port driver private data. portId 24-bit D_ID for port. portWwn Port W orldW ide Na me. Distance The port ’ s lon g-distance level. Speed The port ’ s fixed speed level or negoti ...

  • EMC DS-32B2 - page 375

    1 por tShow 1-359 T elnet Com mands Operands This command has the f ollowing operands: Overrun Buffer overr un interrupts. Suspended T ran smission suspen ded in terrupts. Parity_err Real Tx da ta parity error . 2ndary_parity_err Secondary Tx data parity error . These ar e not real Tx da ta parity errors but rath er force d by the ASIC due to certa ...

  • EMC DS-32B2 - page 376

    1 1-360 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display the status f or a specified E_Port: switch:admin> portShow 2/15 portCFlags: 0x0 portFlags: 0x20001 PRESENT D ISABLED LED portType: 1.1 portState: 2 Offline portPhys: 2 No_Module portScn: 0 portId: 815f00 portWwn: 20:1f:00:60:69:80:04: ...

  • EMC DS-32B2 - page 377

    1 portS tatsShow 1-361 T elnet Com mands portStatsShow Display port h ardware statistics. Syntax portStatsShow [slotnumber/]portnumber A v ailability All users Descr iption Use this comma nd to display port hardware statistics counters. Ta b l e 1 - 2 9 por tStatsShowHardw are Statistics stat_wtx 4-byte words transmitted. stat_wrx 4-byte words r ec ...

  • EMC DS-32B2 - page 378

    1 1-362 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands fl_open Numb er o f OPN yx s ent. fl_opened Number of OPNyx received. fl_openfr Numb er o f OPN fr sent . fl_cls_idle CLS sent due to loop idle. fl_cls_rx CLS received w hen OPEN. fl_bb_stall OPN/CLS BB_Credit stalls. fl_cf_alloc Num ber o f C FIFO s al loc ...

  • EMC DS-32B2 - page 379

    1 portS tatsShow 1-363 T elnet Com mands Operands This command has the f ollowing operand: slotnumber Specify the s lot number in an ED-12000 B switch. The slot number must be followed by a slash ( / ) and the port number . The ED- 12000B ha s a total of 10 slots counte d from 1 to 10. Slot number 5 and 6 ar e contr ol process or card s, an d slot ...

  • EMC DS-32B2 - page 380

    1 1-364 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display the basic set of statistics for blade 2, port 3: switch:admin> portStatsShow 2/3 stat_wtx 118199 4 4-byte words transmitted stat_wrx 1188458 4-byte words received stat_ftx 95830 Frames transmitted stat_frx 15564 Frames received stat_c2 ...

  • EMC DS-32B2 - page 381

    1 po we rOf fLi stS et 1-365 T elnet Com mands po werOf fListSet Set slot power of f lis t or der Syntax powerOffListSet A v ailability Admin Descr iption Use this command to s et the physical p ower off slot order . The system available power is compar ed to the system demand power to determine if there is enough power to operate. If ther e is les ...

  • EMC DS-32B2 - page 382

    1 1-366 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o modify the po w er off list or der: switch12k:admin> powerOffListSet Slot Current POL ------------------- 10 1st 9 2nd 8 3rd 7 4th 4 5th 3 6th 2 7th 1 8th 1st slot to be powered off: (1..10) [1 0] 1 2nd slot to be powered off: (2..10) [9 ] 2 3 ...

  • EMC DS-32B2 - page 383

    1 po we rOf fLi stS ho w 1-367 T elnet Com mands po werOf fListShow Syntax powerOffListShow A v ailability All users Descr iption Use this com mand to display th e or der in which the ph ysical slots will be powered off. The sy stem available power is compared to the system demand power to determine if there is enough powe r to operate. If ther e i ...

  • EMC DS-32B2 - page 384

    1 1-368 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands psSho w Display pow er supply status. Syntax psShow A v ailability All users Descr iption Use this comma nd to display the switch pow er supply status. The display format varies with the number of power su pplies pres ent. Optionally , depending upon switch ...

  • EMC DS-32B2 - page 385

    1 psShow 1-369 T elnet Com mands See Al so fanShow tempShow ...

  • EMC DS-32B2 - page 386

    1 1-370 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ptdatashow Display port da ta structure. Syntax ptdatashow [ slot ]/ port Availability All users Descriptio n Use this command to display the ASIC data structure contents for the specified port. Operands This command has the f ollowing operands: Example T o ...

  • EMC DS-32B2 - page 387

    1 ptphan tomshow 1-371 T elnet Com mands ptphantomsho w Display port routing tables. Syntax ptphantomshow [ slot /] port A v ailability All Users Descr iption Use this comma nd to display the ASIC routing table contents for the specified port. If the slot is not specified, then the slot specified with setslot is used. Operands This command has the ...

  • EMC DS-32B2 - page 388

    1 1-372 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ptpr opsho w Display port properties. Syntax ptpropshow [ slot /] port | [ slot ] -all A v ailability All Users Descr iption Use this command to display the ASIC po rt properties for the specified port. If the slot is not specified, then the slot specified w ...

  • EMC DS-32B2 - page 389

    1 ptr egs ho w 1-373 T elnet Com mands ptregshow Display ASIC port registers. Syntax ptpropshow [ slot ]/ port A v ailability All Users Descr iption Use this command to display the ASIC register contents for the specified port. If the slot is not specified, then the slot specified with setslot is used. Operands This command has the f ollowing opera ...

  • EMC DS-32B2 - page 390

    1 1-374 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ptr outesho w Display port routing properties. Syntax ptrouteshow [ slot ]/ port A v ailability All Users Descr iption Use this command to display th e ASIC port routing properties for the specified port. If the slot is not specified, then the slot specified ...

  • EMC DS-32B2 - page 391

    1 ptstatsshow 1-375 T elnet Com mands ptstatsshow Display port s tatistics properties. Syntax ptstatsshow [ slot ]/ port A v ailability All Users Descr iption Use this comman d to display the ASIC port sta tistic properties for the specified port. If the slot is not specified, then slot specified with setslot is used. Operands This command has the ...

  • EMC DS-32B2 - page 392

    1 1-376 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o vie w port statistics properties on por t 1 on slot 8: switch:admin> portstatsshow 8/1 stat_wtx 8657 4-byte wor ds transmitted stat_wrx 10118 4-byte wor ds received stat_ftx 557 Frames tra nsmitted stat_frx 566 Frames rec eived stat_c2_frx 0 C ...

  • EMC DS-32B2 - page 393

    1 qloopAdd 1-3 77 T elnet Com mands qloopAdd Add a member to a QuickL oop. EMC does not support this comm and. Syntax qloopAdd " qloopnam e", " member;member " A v ailability Admin Descr iption Use this comma nd to add one or more members to an existing QuickLoo p. When a configu ration is enabled, all QuickLoops d efined in the ...

  • EMC DS-32B2 - page 394

    1 1-378 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands qloopCreate Create a QuickLoop. EMC does not support this comm and. Syntax qloopCreate " qloopname ", " member;membe r " A v ailability Admin Descr iption Use this command to crea te a QuickLoop. A QuickLoo p name must begin with a letter ...

  • EMC DS-32B2 - page 395

    1 qlo opCr eat e 1-379 T elnet Com mands Example T o create two Quic kLoops, a single switch and one dual switch: switch:admin> qloopCreate "qlp1", "10: 00:00:60:69:00:60:11" switch:admin> qloopCreate "qlp2", "wwn 2; wwn3" See Al so qloopAdd qloopDelete qloopRemove qloopShow ...

  • EMC DS-32B2 - page 396

    1 1-380 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands qloopDelete Delete a QuickLoo p. EMC does not support this comm and. Syntax qloopDelete " qloopName " A v ailability Admin Descr iption Use th is co mman d to d elete a Qu ickLo op. This comm and changes the De fined Config uration. For the cha nge ...

  • EMC DS-32B2 - page 397

    1 qloopRemove 1-381 T elnet Com mands qloopRemo ve Remove a member from a QuickLoop. EMC does not support this comm and. Syntax qloopRemove " qloopName ", " member;membe r " A v ailability Admin Descr iption Use th is co mmand to r emov e one or mo re membe rs f ro m a QuickLoo p. The member list is identified through an exact s ...

  • EMC DS-32B2 - page 398

    1 1-382 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o remo ve member “ wwn2 ” from “ qlp1 ” : switch:admin> qloopRemove "qlp1", "wwn 2" See Als o qloopAdd qloopCreate qloopDelete qloopShow ...

  • EMC DS-32B2 - page 399

    1 qloopShow 1-383 T elnet Com mands qloopSho w Display Qu ickLoop in formatio n. EMC does not support this comm and. Syntax qloopShow [ pattern ][, mode ] A v ailability All users Descr iption Use this com mand to displa y QuickLoop con figuration in formation. If no parameters are specified, all zo ne configura tion informatio n (defined and enabl ...

  • EMC DS-32B2 - page 400

    1 1-384 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Operands The fol lowing opera nds are opti onal : Example T o display all Quic kLoops beginning with the letter “ q ” : switch:admin> qloopShow "q*" qloop: qlp1 10:00: 00:60:69:00:60:11 10:00:00:60:69:00:30:02 qloop: qlp2 10:00: 00:60:69:00: ...

  • EMC DS-32B2 - page 401

    1 ram Tes t 1-385 T elnet Com mands ramT est Bit write and r ead test of SD RAMs in the switch. Syntax ramTest [ patternSize ] A v ailability Admin Descr iption Use this comm and to verify the address and data bus of the SDRAMs that serve as CPU memory in the switch. The test co nsists o f two subtests: ◆ The addr ess subtest verifies that SDRAM ...

  • EMC DS-32B2 - page 402

    1 1-386 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Since the test r equires the o perating system to operate, and the operating syst em is loaded in t he same me mory , the tes t does not and cannot test all 16 MB o f the memory . Instead, it tests the largest portion as given by th e OS, which is typical ly ...

  • EMC DS-32B2 - page 403

    1 reboot 1-3 87 T elnet Com mands reboot Reboot the swi tch. Syntax reboot A v ailability Admin Descr iption The reboot comma nd will r eboot both logi cal switc hes and b oth CPs. Use this command to r eboot both logical switches and both CPs. The reboot takes effect immediately as the switch r esets, and then executes the normal power- on booting ...

  • EMC DS-32B2 - page 404

    1 1-388 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ro u t e H e l p Display routing hel p commands. Syntax routeHelp A v ailability Admin Descr iption Use this com mand to display routing h elp commands. Operands None Example T o vie w a list of routin g related commands: switch:admin> routeHelp bcastShow ...

  • EMC DS-32B2 - page 405

    1 sav ec ore 1-389 T elnet Com mands sa v ecor e Save or r emove cor e files cr eated by daemons. Syntax savecore A v ailability Admin Descr iption Use this command to transfer (by wa y of F TP) or remove core files that were crea ted by daemons du ring signal processing such as SIGSEGV , SIGILL, etc. This command i s menu driven so no ope rands ar ...

  • EMC DS-32B2 - page 406

    1 1-390 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands sensorSh o w Display sen sor readings. Syntax sensorShow A v ailability All users Descr iption Use this command to display the current temperature, fan and power supply status and readings from sensors located on the switch . The actual location of the senso ...

  • EMC DS-32B2 - page 407

    1 sensor Show 1-391 T elnet Com mands Example The output of this command is dif ferent between v3.0 and v4.0. Below is an example of the output of this command fr o m v4.0: switch40:admin> sensorshow sensor 1: (Temperature) is Ok, value is 32 C sensor 2: (Temperature) is Absent sensor 3: (Temperature) is Ok, value is 44 C sensor 4: (Temperature) ...

  • EMC DS-32B2 - page 408

    1 1-392 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands setesdmo de Enable or dis able ESD mode. Syntax setesdmode [ mode | -show] A v ailability Admin Descr iption Use this command to enab le or disable ESD mode. The mode is saved in nonvolatile memory and stays in that mode until the next execution of setesdmod ...

  • EMC DS-32B2 - page 409

    1 setgbicmo de 1-393 T elnet Com mands setgbi cmode Enable or disable GBIC mode. SSyn tax setgbi cmode [mode | -show] A v ailability Admin Descr iption Use this command to enable or disable the GBIC mod e. If the mode operand is 1 , GBIC mode is enabled; if the mode operand is 0, GBIC mode is disabled. The mode is saved in flash memory and stays in ...

  • EMC DS-32B2 - page 410

    1 1-394 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands setmfgmode Enable or di sable Mfg mode. Syntax setmfgmode [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable Mfg mode. The mode is saved in non-vola tile memory an d stays in tha t mode unti l the next execution of setmfg ...

  • EMC DS-32B2 - page 411

    1 setsfp mod e 1-395 T elnet Com mands setsfpmode Enable or di sable SFP mode. Syntax setsfpmode [ mode | -show] A v ailability Admin Descr iption Use this command to enable or disable the SFP mode. If the mode operand is 1, S FP mode is enabled; if the mode operand is 0, SFP mode is disabled. The mode is saved in nonvolatile memory and the SFP rem ...

  • EMC DS-32B2 - page 412

    1 1-396 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands setSlot Set the def ault slo t numb er for d iag nosti c co mman ds. Syntax setslot slot A v ailability Admin Descr iption Use this comma nd to set the default slot number for diag nostic commands. This co mmand wil l set the current slot, which w ill affect ...

  • EMC DS-32B2 - page 413

    1 setSplbM ode 1-397 T elnet Com mands setSplbMode Enable or dis able two port loopback. Syntax setSplbMode [mode | -show] A v ailability Admin Descr iption Use this command to enable or dis able SPLB mode. The mode i s saved in flash memory and stays in that mode until the next execution of setSplbMode . The mode becomes a ctive as soon as this co ...

  • EMC DS-32B2 - page 414

    1 1-398 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o enable or disable a tw o- port loopback: switch:admin> setSplbMode 1 Config update Succeded. SPLB mode is now 1 (Enabled). switch:admin> setSplbMode 0 Config update Succeded. SPLB mode is now 0 (disabled). See Als o setSfpMode setGbicMode s ...

  • EMC DS-32B2 - page 415

    1 sfpShow 1-399 T elnet Com mands sfpShow Display serial ID S FP information . Syntax sfpShow [slotnumber/][portnumber] A v ailability All users Descr iption Use this com mand to displa y informatio n about seria l identificati on SFPs (als o known as modu le definition "4" SFPs ). These SF Ps provide extended informa tion that describes ...

  • EMC DS-32B2 - page 416

    1 1-400 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display SFP summary information and detailed information f or an SFP: switch12k:admin> sfpshow Area 0: id (id) Vendor: Serial No: Area 1: id (sw) Vendor: FINISAR CORP. Serial No: H1149T2 Area 2: id (sw) Vendor: FINISAR CORP. Serial No: H112TUD ...

  • EMC DS-32B2 - page 417

    1 sfpShow 1-401 T elnet Com mands switch12k:admin> sfpshow 1/3 Identifier: 3 SFP Connector: 7 LC Transceiver: 050c402000000000 100,200_ MB/s M5,M6 sw Inter_dist Encoding: 1 8B10B Baud Rate: 21 (units 100 megabaud) Length 9u: 0 (units 100 meters) Length 50u: 30 (units 10 meters) Length 625u: 13 (units 10 meters) Length Cu: 0 (units 1 meter) Vendo ...

  • EMC DS-32B2 - page 418

    1 1-402 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands slotOff Disable a blade slot. Syntax slotOff slot A v ailability Admin Descr iption Use this comman d to disable a nonfa ulty blade unit while leavi ng the blade unit powered on. Operand This command has the f ollowing operand: Example T o po wer of f blade ...

  • EMC DS-32B2 - page 419

    1 slot On 1-403 T elnet Com mands slotOn Enable a blad e slot. Syntax slotOn slot A v ailability Admin Descr iption Use this com mand to reenable a blade un it that was previously disabled. Operand This command has the f ollowing operand: Example T o r eenab le bla de un it 3 : switch:admin> sloton 3 Slot 3 is being enabled. See Al so slotShow s ...

  • EMC DS-32B2 - page 420

    1 1-404 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands slotpow erof f Power off a blade unit. Syntax slotPowerOff slot A v ailability Admin Descr iption Use this command to turn o ff the power to a blade un it. The slot must have a valid blade unit pr esent and the blade unit must be of a type that can be powere ...

  • EMC DS-32B2 - page 421

    1 slotpoweron 1-405 T elnet Com mands slotpow eron Power on a blade unit . Syntax slotPowerOn slot A v ailability Admin Descr iption Use this command to turn on the power to a blade unit. The slot must have a valid blade unit pr esent and the blade unit must be curr ently powered o ff. Operand This command has the f ollowing operand: Example T o po ...

  • EMC DS-32B2 - page 422

    1 1-406 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands slotShow Display slo t status. Syntax slotShow A v ailability All users Descr iption Use this co mmand to inventory a nd display th e current status o f each slot in the system. Th e format of the display includes a h eader and four fields for each s lot. Th ...

  • EMC DS-32B2 - page 423

    1 slotShow 1-407 T elnet Com mands Operands None Example T o display a blade in ventory and status: switch:admin> slotshow Slot Blade Type ID Status --------------------------------- 1 UNKNOWN VACANT 2 SW BLADE 2 ENABLED 3 UNKNOWN VACANT 4 SW BLADE 2 ENABLED 5 CP BLADE 1 ENABLED 6 CP BLADE 1 ENABLED 7 SW BLADE 2 ENABLED 8 UNKNOWN VACANT 9 SW BLA ...

  • EMC DS-32B2 - page 424

    1 1-408 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands See Als o chassisShow slotOn slotOff slotPowerOn slotPowerOff ...

  • EMC DS-32B2 - page 425

    1 snmpM ibCa p Set 1-409 T elnet Com mands snmpM ibCa pSe t V iew an d mod ify options fo r configurin g SNMP MI B/T rap capability . Syntax snmpMibCapSet A v ailability Admin Descr iption Use this co mmand to turn on o r of f certain MIBs an d TRAPs. This comma nd al so ena bles a us er to turn on or off g roup info rmatio n and SSN in SW trap mes ...

  • EMC DS-32B2 - page 426

    1 1-410 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands spinFab T e st for Ca scaded s witch IS Ls. Syntax spinfab [-nmegs nmill][-ports list][-s etfail failmode] [-domain domain] A v ailability Admin Descr iption Use this comma nd to verify the intended functional op eration of the I S L s b e t w e e n s w i t ...

  • EMC DS-32B2 - page 427

    1 spinFa b 1-411 T elnet Com mands Operands This command has the f ollowing operands: nmil The number of million f rames per port to execute this test. If omitt ed, the default value used is 100. This operan d is optional. ePortBeg First port to test, if omitted 0 will be used. This operand is optiona l. ePortEnd The last por t to test. The test wi ...

  • EMC DS-32B2 - page 428

    1 1-412 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Examples This example is for v4.0. T o run spinFab on ports 0- 4: switch:admin> spinfab -nmegs 3 -ports 0-4 spinfab running... spinfab: Completed 3 megs, status: pa ssed. port 0 test status: 0x00000000 -- pas sed. port 1 test status: 0x00000000 -- pas sed ...

  • EMC DS-32B2 - page 429

    1 spinFa b 1-413 T elnet Com mands 0x3f STATS_C3FRX 0x40 STATS 0x41 MBUF_STATE_ERR 0x42 FINISH_MSG_ERR 0x43 RXQ_RAM_PERR See Al so crossPortTest portLoopbackTest spinSilk setDbg ...

  • EMC DS-32B2 - page 430

    1 1-414 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands spinSilk Run functional test of port-to-port path at maximum switch speed. Syntax spinSilk [-nmegs nmill][-gbic_mode gbi cmode][-lb_mode lbmode] [-spd_mode spdmode][-ports lis t] A v ailability Admin Descr iption Use this command to verify the functional ope ...

  • EMC DS-32B2 - page 431

    1 spinSilk 1-4 15 T elnet Com mands At each pass, the frame is created fr om a diffe rent data type. There ar e seven data types: If seven passes are r equested, the seven different data types ar e used in the test. If eight passes a re r equested, the first s even frames use unique data types, and the eighth is the same as the first. spinSilk Mode ...

  • EMC DS-32B2 - page 432

    1 1-416 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands The connections between pairs of M-to-M ports are c hosen to exercise the connections between as many ASICs as possible subject to the availabil ity of pairs of M-to-M ports. ◆ In mode 1 with SPLB mode disabl ed, the spinsilk command only circulates frames ...

  • EMC DS-32B2 - page 433

    1 spinSilk 1-4 17 T elnet Com mands Operands This command has the f ollowing operands: nmill Specify the number of mi llion fram es to send. The test w ill progr es s until the specified number of frames has been transmitted on each port. The default value for nmill is 10, so th e number of frames sent will be at leas t 10 millio n. lb_mode Specify ...

  • EMC DS-32B2 - page 434

    1 1-418 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands spdmode Specify the speed mode for the test. This parameter is only used for v3.0 an d v4.0 series based switches wher e it contr ols the speed at which ea ch port is o perated. For 1G only products it is ignored. The ex act op erat ion of modes 3 throug h 6 ...

  • EMC DS-32B2 - page 435

    1 spinSilk 1-4 19 T elnet Com mands Example T o r un spinsilk on a switch: switch:admin> switchdisable switch:admin> spinsilk Running Spin Silk ............. One moment please ... Waiting for Port(s) to Segment. ************** <output truncated> Error s The possible err or messages if failur es ar e detected are: DIAG-INIT DIAG-PORTDIED ...

  • EMC DS-32B2 - page 436

    1 1-420 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands sramRetentionT est Run da ta retention test of the mi scellane ous SR AMs in A SIC. Syntax sramRetentionTest [ passCount ] A v ailability Admin Descr iption Use this com mand to verify that data written in to the miscella neous SRAMs in the ASIC are retained ...

  • EMC DS-32B2 - page 437

    1 sramRetention T es t 1-421 T elnet Com mands See Al so ramTest portRegTest centralMemoryTest cmiTest turboRamTest camTest statsTest filterTest portLoopbackTest spinSilk ...

  • EMC DS-32B2 - page 438

    1 1-422 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands statsT e st Run a statisti cs counter diagno stic test. Syntax statsTest [-passcnt passcount][-ports list] A v ailability Admin Descr iption Use this command to verify the bloom statistics counter logic. It can run on every base por t of quadrant, and send t ...

  • EMC DS-32B2 - page 439

    1 statsT est 1-4 23 T elnet Com mands Diagnostics When it detects failure(s), the subtest may r eport one or more of the following err or messages: DIAG-STSINIT DIAG-STSNULL DIAG-STSSID DIAG-STSXMIT DIAG-STSRCV DIAG-STSFRMCNT DIAG-STSWRDCNT DIAG-STSALPACNT Example T o r un a statistics counter test on a switch: switch:admin> statsTest Running St ...

  • EMC DS-32B2 - page 440

    1 1-424 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands supportShow Display mu ltiple test results for custom er debugging. The supportShow co mmand is used to g ather swit ch informa tion for debugg ing purpose s. Y our EMC Cus tomer Serv ice r epresen tati ve may as k you to run this comman d and captu re t he ...

  • EMC DS-32B2 - page 441

    1 suppor tShow 1-425 T elnet Com mands Example T o display switch information for deb ugging: switch:admin> supportShow 4/0, 15 version: Kernel: 2.4.2 Fabric OS: 4.0.0 Made on: Thu Oct 25 00:58:55 2001 Flash: Thu Oct 25 00:58:55 2001 BootProm: Unknown uptime: 11:46pm up 4:39, 3 users, load av erage: 1.85, 1.45, 1.15 tempshow: Index Slot State Ce ...

  • EMC DS-32B2 - page 442

    1 1-426 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchBeacon Set swit ch beac oning m ode on or off. Syntax switchBeacon [mode] A v ailability Admin Descr iption Use this com mand to set the switch beaco ning mode on (if the operand is 1) or off (if the oper and is 0). When beaconing mode is turned on, th ...

  • EMC DS-32B2 - page 443

    1 switchCfgSpeed 1-427 T elnet Com mands switchCfg Speed Configure all ports of the switch to a particula r speed level. Syntax switchCfgSpeed speed_level A v ailability Admin Descr iption Use this command to configur e the speed of all the ports on a switch to a particula r level. The configuratio n is saved in the non-vo latile memory and persist ...

  • EMC DS-32B2 - page 444

    1 1-428 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchCfgT r unk Enable or disable trunking on all the ports of a s witch. Syntax switchCfgTrunk [mode] A v ailability Admin Descr iption Use this com mand to enable or disable trunkin g on all the po rts of a switch. This comm and r equir es the T runking l ...

  • EMC DS-32B2 - page 445

    1 switch diag 1-429 T elnet Com mands switchdiag Run dia gnosti cs on aD S-32B 2 switch. Syntax switchdiag A v ailability Admin Descr iption Use this comma nd to run a suite of diagnostics tests on the specified switch. T o run this command yo u must insta ll loopback plu gs on every port. The tests executed ar e: ◆ portregtest ◆ centralmemoryt ...

  • EMC DS-32B2 - page 446

    1 1-430 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands passed. Test return status: 0 CentralMemoryTest Running centralmemorytest ............ passed. Test Complete: "centralmemorytest" Pas s 1 of 1 Duration 0 hr, 0 min & 19 sec (0:0:19: 611). passed. Test return status: 0 <output truncated> S ...

  • EMC DS-32B2 - page 447

    1 switchd iagshor t 1-4 31 T elnet Com mands switchdiagshort Run dis agnostics on a DS- 32B2. Syntax switchdiagshort A v ailability Admin Descr iption Use this comma nd to run a suite of diagnostics tests on the specified switch. T o run this command yo u must insta ll loopback plu gs on every port. The tests executed ar e: ◆ portregtest ◆ cent ...

  • EMC DS-32B2 - page 448

    1 1-432 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands passed. Test return status: 0 CentralMemoryTest Running centralmemorytest ............ passed. Test Complete: "centralmemorytest" Pas s 1 of 1 Duration 0 hr, 0 min & 19 sec (0:0:19: 611). passed. Test return status: 0 <output truncated> S ...

  • EMC DS-32B2 - page 449

    1 switchD isa ble 1-4 33 T elnet Com mands switchDisable Disable the switch. Syntax switchDisable A v ailability Admin Descr iption Use this command to disable the switch. All Fibr e Channel ports are taken off line; if the switch was part o f a fabric, the remaining switches reconfigure. The switch mus t be disabled before making configura tion ch ...

  • EMC DS-32B2 - page 450

    1 1-434 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchEnable Enable the switch. Syntax switchEnable A v ailability Admin Descr iption Use this com mand to enable the switch. A ll Fibre Channel ports that passed POST ar e enabled. They can come o n line if connected to a device, or r emain off line if disc ...

  • EMC DS-32B2 - page 451

    1 switc hName 1-435 T elnet Com mands switchName Display or set s witch name. Syntax switchName [" newName" ] A v ailability All users (displa y) Admin ( set) Descr iption Use this com mand without an op erand to display the current switch name. This name is also shown in the T elnet prompt, under each switch icon on the W eb T ools Fabri ...

  • EMC DS-32B2 - page 452

    1 1-436 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchReboot Halt and bring d own the operationa l switch. Syntax switchReboot A v ailability Admin Descr iption Use this com mand to reboot the operational sw itch withou t disrupting the other sw itch in the ED -12000B ch assis. Use this command whenyou ca ...

  • EMC DS-32B2 - page 453

    1 switc hSho w 1-437 T elnet Com mands switchShow Display sw itch and port status. Syntax switchShow A v ailability All users Descr iption Use this com mand to display sw itch and port status information. Informatio n may vary by sw itch model . Below is the info rmation provided. The first section provides switch summar y information; it is follow ...

  • EMC DS-32B2 - page 454

    1 1-438 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands The switch summary is followed by one line per port: port number Port n umber . V alid va lues vary depending o n the switch type . module type Port module type (GBIC or other): ◆ -- — no module pre sent ◆ sw — shortwa ve laser ◆ lw — longw ave l ...

  • EMC DS-32B2 - page 455

    1 switc hSho w 1-439 T elnet Com mands Operands None comment The comment field may be blank, or it may display: ◆ Disabled — port is disabled ◆ Bypassed — port is bypassed (loop only) ◆ Loopback — port is in loopback mode ◆ E_Port — fabric po rt, sho ws WW N an d nam e o f attac he d s witch ◆ F_Port — point-to- point port, sho ...

  • EMC DS-32B2 - page 456

    1 1-440 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example The follo wing e xample sh ows an ED-12000B: switch12000:admin> switchshow switchName: switch12000 switchType: 10.1 switchState: Online switchRole: Principal switchDomain: 4 switchId: fffc04 switchWwn: 10:00:00:60:69:00:54:e 9 switchBeacon: OFF bl ...

  • EMC DS-32B2 - page 457

    1 switc hSho w 1-441 T elnet Com mands The foll owing e xample s hows a DS-32B2: switch3900:admin> switchshow switchName: switch3900 switchType: 12.1 switchState: Online switchRole: Principal switchDomain: 1 switchId: fffc01 switchWwn: 10:00:00:60:69:90:02:3 e switchBeacon: OFF Port Gbic Speed State ========================= 0 id N2 Online 1 id ...

  • EMC DS-32B2 - page 458

    1 1-442 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands See Also switchDisable switchEnable switchName ...

  • EMC DS-32B2 - page 459

    1 switchS hutdo wn 1-4 43 T elnet Com mands switchShutdown Halt the oper atio nal swi tch. Syntax switchShutdown A v ailability Admin Descr iption This comma nd halts the switch operation wit hout disrupting the other switch in the ED-12 000B chassis. This comm and mu st be used in co mbinat ion with switchStart . This command brings down all the d ...

  • EMC DS-32B2 - page 460

    1 1-444 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchStar t Initialize the sw itch to operatio nal. Syntax switchStart A v ailability Admin Descr iption This com mand initiali zes a logica l switch witho ut disrupting the other switch in the ED-12 000B chassis. This command must be used in combination wi ...

  • EMC DS-32B2 - page 461

    1 switch Status P o licySet 1-445 T elnet Com mands switchStatusPolic ySet Set the policy parameters tha t determine the overall s witch status. Syntax switchStatusPolicySet A v ailability Admin Descr iption Use this comma nd to set the policy parameters for calcula ting the overall statu s of the switch enclo sure. The policy parameter values dete ...

  • EMC DS-32B2 - page 462

    1 1-446 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands status to DOWN. If two ports were faulty , then this contributor would set the overall sw itch status to DOWN . This command enables you to set a threshold for each contributor , so that a certain number of f ailures ar e r equired to change the overall stat ...

  • EMC DS-32B2 - page 463

    1 switch Status P o licySet 1-447 T elnet Com mands Example Notice that in the following example, the only parameters modified are the n umber of Missing SFPs allowed before the s tatus of the switch changes to MARGINAL and DOWN . switch:admin> switchStatusPolicySet To change the overall switch statu s policy parameters The current overall switc ...

  • EMC DS-32B2 - page 464

    1 1-448 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchStatusPolic yShow Display th e policy parameters that determine the overall sw itch status. Syntax switchStatusPolicyShow A v ailability All users Descr iption Use this command to view the current policy parameters set for the switch. These poli cy par ...

  • EMC DS-32B2 - page 465

    1 switch StatusP olicyShow 1-449 T elnet Com mands Example T o display the switch status policy: switch:admin> switchStatusPolicyShow The current overall switch status poli cy parameters: Down Marginal --------------------------------- - FaultyPorts 1 0 MissingGBICs 0 1 PowerSupplies 2 1 Temperatures 3 1 Fans 3 1 PortStatus 0 0 ISLStatus 2 1 See ...

  • EMC DS-32B2 - page 466

    1 1-450 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchStatusSho w Display th e overall status of the switch. Syntax switchStatusShow A v ailability All Users Descr iption Use this command to display the overall status of the switch. Th e overall status is calculated based on the most sever e st atus of al ...

  • EMC DS-32B2 - page 467

    1 switchS tatus Show 1-451 T elnet Com mands Example There ar e t wo examples below . The first shows a switch with a status of MARGI NAL, the sec ond shows th e sa me swit ch afte r all the err ors have been fixed. switch:admin> switchStatusShow The overall switch status is Marginal/ Warning Contributing factors: * 1 missing power supply trigge ...

  • EMC DS-32B2 - page 468

    1 1-452 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands switchuptime Display the amount of time the switch has been operating. Syntax switchuptime A v ailability All users Descr iption Use this comma nd to display the current time and the amount of time the switch ha s been operatio nal. Operands None Example T o ...

  • EMC DS-32B2 - page 469

    1 syslog dIpAdd 1-4 53 T elnet Com mands syslogdIpAdd Add the IP a ddress o f a syslog daemon. Syntax syslogdIpAdd IPaddress A v ailability Admin Descr iption Use this command to add the IP addr ess of a syslog daemo n, that is, the IP addr ess of the server that is running the syslogd pr ocess. Syslog daemon ( syslogd ) is a pr ocess available on ...

  • EMC DS-32B2 - page 470

    1 1-454 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands syslogdIpRemo ve Remove the IP addre ss of a sys log daemon. Syntax syslogdIpRemove IPaddress A v ailability Admin Descr iption Use this comm and to remove the IP address of a syslog daemon, tha t is, the IP address of the server which is running the syslogd ...

  • EMC DS-32B2 - page 471

    1 syslogdIp Show 1-455 T elnet Com mands syslogdIpSho w Display a ll syslog d aemon IP ad dresses. Syntax syslogdIpShow A v ailability All users Descr iption Use thi s command to display a ll syslog d aemon I P addresses in the configuration database. Operands None Example T o display all syslog daemon IP addresses: switch:admin> syslogdIpShow s ...

  • EMC DS-32B2 - page 472

    1 1-456 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands systemtest Run dia gnosti cs on a sw itch blade. Syntax systemtest [-slot slot ] A v ailability Admin Descr iption Use this comma nd to run a suite of diagnostics tests on the specified switch blad e. T o run this co mmand you must inst all loop back plugs o ...

  • EMC DS-32B2 - page 473

    1 systemt est 1-457 T elnet Com mands Example T o r un a suite of diagnostics on blade 7: switch:admin> systemtest -slot 7 Testing slot: 7, user ports: 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 PortRegTest Running Port Register Test .... passed. Test Complete: "portregtest" Pass 1 of 1 Duration 0 hr, 2 min & 23 sec (0:2:23: 443). passe ...

  • EMC DS-32B2 - page 474

    1 1-458 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands tempShow Display tem perature readings. Syntax tempShow A v ailability All users Descr iption Use this command to display the curr ent temperatur e r eadings fro m each of the five temperature sensors located on the main printed circuit boar d o f the switch ...

  • EMC DS-32B2 - page 475

    1 timeOut 1-459 T elnet Com mands timeOut Set or clear the idle T elnet connectio n time-out value. Syntax timeOut [ timeval ] A v ailability All users (displa y) Admin ( show/se t) Descr iption Use this command with no operan ds to display the curr ent telnet timeout value. Use thi s command with an operand to sets the idle timeout valu e to the s ...

  • EMC DS-32B2 - page 476

    1 1-460 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands topolog y Show Display th e unicast fabric topology . Syntax topologyShow [ domainnumber ] A v ailability All users Descr iption Use this com mand to display th e fabric topology , as it appears to the local s witch. This includes: ◆ A list of all domains ...

  • EMC DS-32B2 - page 477

    1 topologyShow 1-461 T elnet Com mands Operand This command has the f ollowing operand: Out Port: Area number of the port that incoming f rame will be forwarde d to, in or der to r each the destination domain. Use the switchshow command to view the area numbers for the switch. In Ports: Area number of the input ports that use the corresponding Out ...

  • EMC DS-32B2 - page 478

    1 1-462 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Examples T o display the unicast fabric topology: switch:admin> topologyShow 2 domains in the fabric; Local Domain ID: 1 Domain: 6 Metric: 500 Name: cylon218 Path Count: 4 Hops: 1 Out Port: 60 In Ports: None Total Bandwidth: 2 Gbps Bandwidth Demand: 0 % F ...

  • EMC DS-32B2 - page 479

    1 trac kChang esSet 1-463 T elnet Com mands trackC hangesSet Enable configurin g of T rack Ch anges feature. Syntax trackChangesSet [ mode ], [ snmptrapmo de ] A v ailability Admin Descr iption Use this comm and to e nab le or dis able the T r ack C han ges fe ature. An SNMP-TRAP mode can also be en abled. T rackable changes are: ◆ Successful log ...

  • EMC DS-32B2 - page 480

    1 1-464 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example The following example shows how to use this command in v4.0: switch12000:admin> trackchangesset 1, 1 Committing configuration...done. switch12k:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: YES switch12000:a ...

  • EMC DS-32B2 - page 481

    1 trac kChang esShow 1-465 T elnet Com mands trackC hangesSho w Display sta tus of T rac k Changes feature. Syntax trackChangesShow A v ailability All users Descr iption Use this com mand to display sta tus of the T rack Changes fea ture. It shows if the featur e is turned on or of f and if SNMP trap a re generated. The output from the T rack Cha n ...

  • EMC DS-32B2 - page 482

    1 1-466 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands trunkDebug Debug a trunk link failure. Syntax trunkDebug port1 , port2 A v ailability Admin Descr iption Use this com mand to debu g a trunk link failu re. This comm and reports one of the f ollowing messages based on the trunk ing properties of the two s pe ...

  • EMC DS-32B2 - page 483

    1 trunk Show 1-467 T elnet Com mands trunkShow Display trunki ng inform ation. Syntax trunkShow A v ailability All users Descr iption Use this com mand to display trunki ng informati on. The fields displaye d are s hown in T able 1-34: Operands None Example T o display trunking information for a switch: switch:admin> trunkShow 1: 1 -> 1 10:00 ...

  • EMC DS-32B2 - page 484

    1 1-468 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands turboRamT est Run the turbo S RAM logic test for 2 Gb ASICs. Syntax turboRamTest [ passcount ] A v ailability Admin Descr iption This command verifies the on-chip SRAM lo cated in the 2 Gb ASIC using the T urbo -Ram BIST cir cuitry . These SRAMS ar e tested ...

  • EMC DS-32B2 - page 485

    1 turboRam T es t 1-469 T elnet Com mands Example T o ex ecute this test: switch:admin> turboRamTest Running Turbo RAM Test ........ passed . Diagnostics When it detects failure(s), the subtest may r eport one or more of the following err or messages: DIAG-W TEST — Me mory f ill operat ion failed. DIAG-I N_RWTEST — Memo ry r-m-w increment su ...

  • EMC DS-32B2 - page 486

    1 1-470 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands uptime Display len gth of time the system has been operationa l. Syntax uptime A v ailability All users Descr iption Use this command to show the current time, how long the system has been up, the number of users curr ently logged in, and the system load ave ...

  • EMC DS-32B2 - page 487

    1 uRou teCo nf ig 1-471 T elnet Com mands uRouteConf ig Configure a static route. Syntax uRouteConfig InArea , Domain , OutArea A v ailability Admin Descr iption Use th is co mmand to c onfigu r e sta tic r ou tes. A stat ic r ou te is assigned a specific path; the pa th does not change with a topology change unless the path beco mes unavailable. A ...

  • EMC DS-32B2 - page 488

    1 1-472 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Examples T o configure a static route f or all traf fic coming in from port 1 and addressed to domain 2 to go th rough port 5: switch:admin> uRouteConfig 1,2,5 done. switch:admin> configShow route.ucastRoute.1.2:5 route.ucastRouteCount: 1 See Als o con ...

  • EMC DS-32B2 - page 489

    1 uRouteRemov e 1-473 T elnet Com mands uRouteRemo ve Remove a s tatic r oute. Syntax uRouteRemove InArea, Domain A v ailability Admin Descr iption Use this com mand to remove a configured static route. When this command is issued, the route to Domain for InArea may or may not change. It changes if the previous static r oute was not along a min imu ...

  • EMC DS-32B2 - page 490

    1 1-474 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands uRouteSho w Display un icast routing info rmation. Syntax uRouteShow [ slotnumber/ ] [ portnumber ], [ domainnumber ] A v ailability All users Descr iption Use this comma nd to display the unicast routing information for a port, as it is known by the FS PF p ...

  • EMC DS-32B2 - page 491

    1 uRouteShow 1-475 T elnet Com mands The informatio n provided by this comm and should match what is provided by port RouteShow and topologyShow . Operands This command has the f ollowing operands: Hops: Maximum number of hops r equired to reach the destination domain. Flags: Indicates if route is dynamic ( D) or stati c (S). A dyn amic route is di ...

  • EMC DS-32B2 - page 492

    1 1-476 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Examples The first example disp lays the routing info rmation of al l the active ports, The second comma nd displays the routing in formation of port 1 1 on sl ot 1, and the third comman d displays the routing informatio n of port 1 1 to domain 4 only: switc ...

  • EMC DS-32B2 - page 493

    1 versio n 1-477 T elnet Com mands ver s i o n Display firmw are version info rmation. Syntax version A v ailability All users Descr iption Use this com mand to displa y firmware version inform ation and bu ild dates. The follow ing is displ ayed as show n in T able 1- 36: Usually t he Made on and Flash dates ar e the same, since the switch starts ...

  • EMC DS-32B2 - page 494

    1 1-478 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Example T o display f irmware v ersion information on an ED-12000B: switch12k:admin> version Kernel: 2.4.2 Fabric OS: v4.0.0 Made on: Fri Feb 1 23:02:08 2002 Flash: Fri Feb 1 18:03:35 2002 BootProm: 3.1.13b switch12000:admin> See Als o firmwareDownload ...

  • EMC DS-32B2 - page 495

    1 wwn 1-479 T elnet Com mands wwn V iew a switch WWN . Syntax wwn A v ailability All users Descr iption Use this com mand to display th e WWN of a switch. A ll switches have a numeric ad dress that is the unique Fibre Channel add ress used for communicating with the switch. The WWN is shown in the output of th e switchShow com ma nd. Operands None ...

  • EMC DS-32B2 - page 496

    1 1-480 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands zone Add Add a member to the zo ne. Syntax zoneAdd " zoneName", "member/member " A v ailability Admin Descr iption Use this command to add o ne or more m embers to an existing zone. This comm and r equir es a Zonin g license . Operands Th ...

  • EMC DS-32B2 - page 497

    1 zoneCreate 1-4 81 T elnet Com mands zone Create Create a zone. Syntax zoneCreate " zoneName", "member/member " A v ailability Admin Descr iption Use this command to create a new zone. This comm and r equir es a Zonin g license . A zone na me is a C -style na me begin ning w ith a letter a nd follo wed by any number of letters, ...

  • EMC DS-32B2 - page 498

    1 1-482 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands Specify a Q uickLoop A L_P A as a QuickLoo p name fol lowed by a li st of AL_P As, for example "qloop1[01,02]". QuickLoop names have the same format as zone names, an d are cr eated with the qloopCreate command to define a switch or pair of switche ...

  • EMC DS-32B2 - page 499

    1 zoneCreate 1-4 83 T elnet Com mands Operands This command has the f ollowing operands: Example: T o create three zones using a combination of port numbers and zone aliases: switch:admin> zoneCreate "Red_zone", " 1,0; loop1" switch:admin> zoneCreate "Blue_zone", "1,1; array1; 1,2; array2" switch:admin& ...

  • EMC DS-32B2 - page 500

    1 1-484 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands zone Delete Delete a zone. Syntax zoneDelete " zoneName" A v ailability Admin Descr iption Use this command to delete a zone. This comm and r equir es a Zonin g license . Operand This command has the f ollowing operand: Example T o delete the zone ...

  • EMC DS-32B2 - page 501

    1 zoneHelp 1-4 85 T elnet Com mands zoneHe lp Display hel p informat ion on zon e commands . Syntax zoneHelp A v ailability All users Descr iption Use th is co mmand t o dis play help info rmatio n on zone co mman ds. Operands None Example T o display zone command help inf ormation: switch:admin> zoneHelp aliAdd Add a member t o a zone alias ali ...

  • EMC DS-32B2 - page 502

    1 1-486 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands cfgClear Clear all zone configurations cfgDisable Disable a zone configuration cfgEnable Enable a zone configuration cfgSave Save zone conf igurations in flash cfgTransAbort Abort zone con figuration transaction switch:admin> See Als o zoneAdd zoneCreate ...

  • EMC DS-32B2 - page 503

    1 zoneRemov e 1-487 T elnet Com mands zoneRemo ve Remove a member fr om a zone. Syntax zoneRemove "zoneName", "member;member" A v ailability Admin Descr iption Use this command to r emove one or mor e members fr om an existing zone. A member list is located by an exact st ring match, therefor e, it is important to ma intain th e ...

  • EMC DS-32B2 - page 504

    1 1-488 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands zoneSho w Display z one informati on. Syntax zoneShow ["pattern"], [, mode] A v ailability All users Descr iption Use this com mand to displa y zone config uration inform ation. If no parameters are specified, all zo ne configura tion informatio n ...

  • EMC DS-32B2 - page 505

    1 zoneShow 1-489 T elnet Com mands Example T o show all zones beginning with the letters "A" thruogh "C": switch:admin> zoneShow "[A-C]*" zone: Blue_zone 1,1; array1; 1,2; arra y2 See Al so zoneAdd zoneCreate zoneDelete zoneRemove ...

  • EMC DS-32B2 - page 506

    1 1-490 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual T elnet Commands ...

  • EMC DS-32B2 - page 507

    License T elnet Commands 2-1 2 Invisible Body T ag This chapter sum marizes the com mands that a re only available with a license key . ◆ Zoning Commands ...................... ........... ................. ........... ............... 2-2 ◆ Extended Fabric Comman d ........ ........... ................. ........... ............... 2-4 ◆ Exten ...

  • EMC DS-32B2 - page 508

    2 2-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Lice nse T elnet Comman ds Zoning Commands The following com mands are available wit h the purchase of a Zoning license key . For de tailed informa tion about zoning, refer to the EMC Connec trix D epartm ental S witch D S-32B 2 and Ent erp rise Directo r ED-12000 B Zonin g Us ...

  • EMC DS-32B2 - page 509

    2 Zoning Commands 2-3 Licens e T elnet Comman ds cfgDisable Disable a zone configuration. cfgEnable Enable a zone configuration. cfgSave Save zone configurations i n flash memor y . cfgTransAbort Abort the current zoning tra nsaction. Ta b l e 2 - 1 Zoning Commands ( continued ) Command Descriptio n ...

  • EMC DS-32B2 - page 510

    2 2-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Lice nse T elnet Comman ds Extended F abric Command The followin g comman d is available wi th the purchase of a Extended Fabrics license key . For detailed info rmation abou t Extended Fabrics ref e r t o t h e EM C Connectr ix Departme ntal Switch DS-3 2B2 and Enterprise Dir ...

  • EMC DS-32B2 - page 511

    2 Fa br ic Watc h Co m ma n ds 2- 5 Licens e T elnet Comman ds F abr ic W atch Commands The following commands ar e availab le with the purch ase of a Fabric W a tch license k ey . For det ailed information a bout Fabric W a tch, refer to the EMC Conn ectrix Depart mental Switch DS -32B2 and Enter prise Dir ector ED- 12000B Fab ric W atch Use r Gui ...

  • EMC DS-32B2 - page 512

    2 2-6 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Lice nse T elnet Comman ds T r unking Commands The following commands ar e availab le with the pur chase of a T runki ng li cen se ke y . Fo r mor e deta iled i nfo rmati on a bout tru nki ng, ref e r t o t h e EM C Connectr ix Departme ntal Switch DS-3 2B2 and Enterpri se Dir ...

  • EMC DS-32B2 - page 513

    2 Perf o rmanc e Monitor ing Co mmands 2-7 Licens e T elnet Comman ds P erf or mance Monitoring Commands The following commands ar e availab le with the pur chase of an Advanced Performance Monitoring license key . For more detailed infor mation a bout Pe rforma nce Mon itoring, refer to the EM C Connec trix D epartm ental S witch DS -32B2 and Ente ...

  • EMC DS-32B2 - page 514

    2 2-8 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Lice nse T elnet Comman ds ...

  • EMC DS-32B2 - page 515

    Fabr ic OS V er sion Co mpar ison 3-1 3 Invisible Body T ag This chapter summarizes the commands available in v3 .0 and v4.0. ◆ Command Dif fer ences Between V ersions................... ........... ......... 3-2 Fabric OS V er sion Compar ison ...

  • EMC DS-32B2 - page 516

    3 3-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Fabric OS V er sion Compariso n Comm and D ifferences Between V er sions This table pr ovides a list of which commands ar e available in v3.0 and in v4.0. It also pr ovides notes on dif feren ces that may exist for a particular com mand between versions. Ta b l e 3 - 1 Fabric ...

  • EMC DS-32B2 - page 517

    3 Command Dif ferences Between V ers ions 3-3 Fabric OS V ersio n Comparison bsn Y es No N ot suppor ted in v4.0. Functional ity was replaced by chassisshow command in v4.0. camTest Ye s Ye s centralMemoryTest Y es Y es New operands in v4.0 cfgAdd Ye s Ye s cfgClear Ye s Ye s cfgCreate Ye s Ye s cfgDelete Ye s Ye s cfgDisable Ye s Ye s cfgEnable Ye ...

  • EMC DS-32B2 - page 518

    3 3-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Fabric OS V er sion Compariso n crossPortTest Y es Y e s New operands in v4.0 dataTypeShow Ye s Ye s date Ye s Ye s diagClearError Ye s Ye s diagCommandShow No Y es New command f or v4.0 diagDisablePost Ye s Ye s diagEnablePost Ye s Ye s diagesdPorts No Y es New comm and f or ...

  • EMC DS-32B2 - page 519

    3 Command Dif ferences Between V ers ions 3-5 Fabric OS V ersio n Comparison errShow Ye s Ye s fabricShow Ye s Ye s fabStatsShow Ye s Ye s fanDisable No Y es New comm and f or v4.0 fanEnable No Y es New comm and f or v4.0 fanShow Ye s Ye s faStatsShow Y es No N ot suppor ted in v4.0 fastboot Ye s Ye s fazoneAdd Y es Y e s Specify members using area ...

  • EMC DS-32B2 - page 520

    3 3-6 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Fabric OS V er sion Compariso n fwConfigure Y es Y es Ne w En vironmenta l Classe s in v4.0 fwFruCfg No Y es New comm and f or v4.0 fwHelp Ye s Ye s fwMailCfg Ye s Ye s fwSetToCustom Ye s Ye s fwSetToDefault Ye s Ye s fwShow Y es Y es Outp ut modified in v4.0 h Ye s Ye s haDis ...

  • EMC DS-32B2 - page 521

    3 Command Dif ferences Between V ers ions 3-7 Fabric OS V ersio n Comparison ipAddrSet Y es Y e s This command has un ique parameters based on switch type ipAddrShow Y es Y e s This command dis plays unique information based o n switch type licenseAdd Ye s Ye s licenseHelp Ye s Ye s licenseIdShow No Y es New comm and f or v4.0 licenseRemove Ye s Ye ...

  • EMC DS-32B2 - page 522

    3 3-8 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Fabric OS V er sion Compariso n msPlCapabilityShow Y es No Renamed in v4.0 to the msCapability Show command msPlClearDB Ye s Ye s msPlMgmtActivate Ye s Ye s msPlMgmtDeactivate Ye s Ye s msTdDisable Ye s Ye s msTdEnable Ye s Ye s msTdReadConfig No Y es New comm and f or v4.0 my ...

  • EMC DS-32B2 - page 523

    3 Command Dif ferences Between V ers ions 3-9 Fabric OS V ersio n Comparison perfDelEEMonitor Y es Y es Addition o f the slot operand perfDelFilterMonitor Y es Y es Addition o f the slot operand perfHelp Ye s Ye s perfSetPortEEMask Y es Y es Addition o f the slot operand perfShowAlpaCrc Y es Y es Addition o f the slot operand perfShowEEMonitor Y es ...

  • EMC DS-32B2 - page 524

    3 3-10 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Fabric OS V er sion Compariso n portPerfShow Ye s Ye s portRegTest Y es Y e s New operands for v4.0 portRouteShow Y es Y e s Addition of the slo t operand portShow Y es Y e s Addition of the slo t operand portStatsShow Y es Y e s Addition of the slo t operand powerOffListSet ...

  • EMC DS-32B2 - page 525

    3 Command Dif ferences Between V ers ions 3-11 Fabric OS V ersio n Comparison qlShow Y es No N ot suppor ted in v4.0 qlStatsShow Y es No N ot suppor ted in v4.0 quietMode Y es No N ot suppor ted in v4.0 ramTest Y es No N ot suppor ted in v4.0 reboot Y es Y e s Reboots entire c hassis in ED-12000B routeHelp Ye s Ye s sensorShow Ye s Ye s setesdmode ...

  • EMC DS-32B2 - page 526

    3 3-12 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Fabric OS V er sion Compariso n switchCfgTrunk Ye s Ye s switchDisable Ye s Ye s switchEnable Ye s Ye s switchName Ye s Ye s switchReboot No Y e s Reboots the current l ogical switch in ED-1200 0B switchShow Ye s Ye s switchShutdown No Y e s Specific t o the ED-12000B switchS ...

  • EMC DS-32B2 - page 527

    3 Command Dif ferences Between V ers ions 3-13 Fabric OS V ersio n Comparison uRouteConfig Y es Y e s Addition of the area para meter uRouteRemove Y es Y e s Addition of the area para meter uRouteShow Y es Y e s Addition of the slo t operand version Y es Y es Outp ut modified in v4.0 wwn Ye s Ye s zoneAdd Y es Y e s Specify members using area numbe ...

  • EMC DS-32B2 - page 528

    3 3-14 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Fabric OS V er sion Compariso n ...

  • EMC DS-32B2 - page 529

    Fabr ic and Sw itch M anagem ent 4-1 4 Invisible Body T ag This chapter explains th e differ ent methods used to manage a SAN for DS-3 2B2 and ED-12 000B swit ches. ◆ Overview .......... ................. ............ ................. ........... ................. ......... 4-2 ◆ User Access Level............. ................. ............ .. ...

  • EMC DS-32B2 - page 530

    4 4-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual F abric and Switch Management Ov er view The DS-32B2 a nd ED-12000B sw itches can be m anaged using several local and remote access me thods. In order to manage a switch, you must have access to o ne of th e available managem ent me thods: ◆ Fabric OS command li ne interface ...

  • EMC DS-32B2 - page 531

    4 User Access L ev el 4-3 Fabric and Switch Management User Acc ess Lev e l There are two levels of us er access for the DS-32 B2 and ED-12000B switches . ◆ Admin ◆ User In Fabric OS v4.0, eac h user access level can have the following number of simultaneous logins: In Fabric OS v3.0 and earlier , multiple user access t o a switch is lim ited. ...

  • EMC DS-32B2 - page 532

    4 4-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual F abric and Switch Management F abr ic OS Command Line Interf ace The Fabric OS command line interface (CLI) accessed thro ugh telnet or serial console pr ovides the user with the full range of management capabilit y on a DS-32B2 an d ED-12000 B switch. The Fabric OS CLI enabl ...

  • EMC DS-32B2 - page 533

    4 We b To o l s 4-5 Fabric and Switch Management We b To o l s W eb T ools provides a graphical in terface that allows th e administrato r to monitor and manag e entire fa brics and individual switches and ports f rom a standard workstation. It is an optio nally licensed product that r uns on Fabric OS. A ll switches in the fabric ar e displayed in ...

  • EMC DS-32B2 - page 534

    4 4-6 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual F abric and Switch Management Fa b r i c Wat c h Fabric W atch software monitors the performance and stat us of Fibre Channel n etworks and DS- 32B2 and ED -12000B s witches, and can alert SAN managers when pr oblems arise. The r eal-time alerts fr om Fabric W atch software he ...

  • EMC DS-32B2 - page 535

    4 Management Ser ver 4-7 Fabric and Switch Management Management Se r ver The Management Server allows an Storage Ar ea Network (SAN) manageme nt application to retrieve and administer the fabric an d interconnect elements such as switches, servers, and storage devices. An access control list (ACL) of WWN addresses determines wh ich systems have ac ...

  • EMC DS-32B2 - page 536

    4 4-8 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual F abric and Switch Management ...

  • EMC DS-32B2 - page 537

    Cont r ol P roc esso r C omm ands 5-1 5 Invisible Body T ag This chapter lists the commands ava ilable when logg ed into the Active CP a nd Standby CP in an ED-12000B. ◆ Active CP Commands ...................... ................. ............ ................ .... 5-2 ◆ Standby CP Commands .............. ................. ........... .......... ...

  • EMC DS-32B2 - page 538

    5 5-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Control Proce ssor Com man ds Activ e CP Command s When logged into the Active CP , the full suite of commands are supported (subject to which license keys are installed). When logged in to the A ctive CP , most commands are still specific to a single logical switch. That is, ...

  • EMC DS-32B2 - page 539

    5 Standby CP Co mmands 5-3 Contr ol Pr oces sor Commands Standb y CP Commands The following commands ar e supported when logged in to the Standby CP . Ta b l e 5 - 1 ED-12000B Standby CP Com mands Command N otes date Prin t/set the system date an d time. fastboot Reboot switch, bypassing the POST . firmwarecommit Commit fir mware to stable storage. ...

  • EMC DS-32B2 - page 540

    5 5-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Manual Control Proce ssor Com man ds ...

  • EMC DS-32B2 - page 541

    Custom er Suppor t A-1 A nvisible Body T ag This appendix reviews the EM C process for detecting and resolving software problems, and provides essenti al question s that you sh ould answer before contacting the EMC Customer Support Center . This appendix covers th e following to pics: ◆ Overview of Detecting and Resolving Pro blems .............. ...

  • EMC DS-32B2 - page 542

    A A-2 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Ma nual Customer Support Ov er view of D etecting and Resol ving Pr oblems EMC software pr oducts are supported dir ectl y by the EMC Customer Support Center in the United States . EMC uses th e following process to resolve customer problems wit h its software products (Figure A-1). ...

  • EMC DS-32B2 - page 543

    A Tr oubleshooting the P roblem A-3 Customer Su pport T roubl eshooti ng the Pr oblem Please perform the r elevant diagnostic steps before yo u contact the EMC Customer Support Center: 1. Re ad t he do cu ment ati on ca reful ly . 2. Reconstruct the events lea ding up to the problem and describe them in writin g. 3. Ru n some test cases to reproduc ...

  • EMC DS-32B2 - page 544

    A A-4 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Ma nual Customer Support Bef ore Calling the Customer Suppor t Center Have the follo wing informatio n available bef ore calling the Cus tomer Support Center or your support r epres entative (if one has been assigned to you): ❑ Y our compa ny name ❑ Yo u r n a m e ❑ Y our phone ...

  • EMC DS-32B2 - page 545

    A Docu menting the Problem A- 5 Customer Su pport Documenting the Pr oblem If the EMC Customer S upport Center req uests information regar ding the problem, please document it com pletely , making sure to include the follow ing info rmation: ❑ Y our compan y name and a ddress ❑ Yo u r n a m e ❑ Y our telephone number ❑ The importance of the ...

  • EMC DS-32B2 - page 546

    A A-6 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Ma nual Customer Support Reporting a New Pr oblem For a new problem, please provide the following i nformation: ❑ Release level of the softw are that you are running ❑ Software installation para meters ❑ Host type on which you are r unning ❑ Operating system yo u are running ...

  • EMC DS-32B2 - page 547

    A Sending P roblem Docu mentatio n A-7 Customer Su pport Sending Problem Documentatio n Use on e of the fo llowi ng metho ds to sen d docu menta tion of th e problem to the EMC Cus tomer Support Center: ◆ Email ◆ FT P ◆ U.S. Mail to the following a ddress: EMC Customer Support Center 45 South St reet Hopkin ton , MA 017 48- 9103 If the proble ...

  • EMC DS-32B2 - page 548

    A A-8 EMC Connectr ix DS-32B2 and ED-12000B Fabric O S Ref erence Ma nual Customer Support ...

  • EMC DS-32B2 - page 549

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-1 Glossar y The terms in the glo ssary relate to the sw itch and Fibre Channel connections. Many of these terms ar e used in this manual. Number s 8b/10b En coding An encoding sch eme that conv erts each 8-bit byt e into 10 bits. Used to balance ones and z eros in h igh speed tran ...

  • EMC DS-32B2 - page 550

    g-2 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual Glossa r y Alias Address Identifier An address identifier recogn ized by a port in addition to its st andard identifier . An alias address identif ier may be shared by multiple ports. Alias Ser ver A fabric software facility that supports mul ticast group managemen t. AL_P A Arb ...

  • EMC DS-32B2 - page 551

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-3 Glossar y BB_Credit Buffer -to-buffe r credit. The number of frames that can be transmitted to a directly connected r ecipient or withi n an arbitrated loop. Determined by the number of receive buf fers available. See also Buffer to Buf fer Flow Co ntr ol and EE_Credit . Beacon ...

  • EMC DS-32B2 - page 552

    g-4 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual Glossa r y Buf fer to Buffer Flo w Control Management of the frame transmi ssion rate in either a point-to -point topology o r in an arbitrated lo op. See also BB_Cr edit . C Cascade The i nter connectio n mean s th r ough w hich dat a flow s fr om one switch to an other in a fa ...

  • EMC DS-32B2 - page 553

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-5 Glossar y Community (SNMP) A relationship between a group of SNMP managers an d an SNMP agent, in which authen tication, access control, and proxy characterist ics ar e defined. See also SNMP . Compact Flash Flash mem ory that stores the r un time operating system and is used li ...

  • EMC DS-32B2 - page 554

    g-6 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual Glossa r y D Data W ord T y pe of transmission word that occurs w ithin frames. The frame header , data field, and CRC all consist of da ta words. See a lso Frame , Order ed S et , and T r ansmis sion Word . DB-9 Connector A 9-pin version of the RS-232C port interface. May be ei ...

  • EMC DS-32B2 - page 555

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-7 Glossar y DTE P ort A data terminal equipment port cap able of interfacing to a transmission circuit through a connection to a DCE (d ata communications equipment) port. DTE devices with an RS-23 2 (or (EIA-232) port interf ace transmit on pin 3, and r eceive on pin 2 in a 9-pin ...

  • EMC DS-32B2 - page 556

    g-8 EMC Connec trix DS-3 2B2 and ED-12000B Fab ric OS Reference Manual Glossa r y ESN Enterprise Storage Network. A storage netwo rk implementation that integrates products, technolo gy , and services offering universa l data access for every major computing platform, operating system, and applicatio n across any combin ation of SCSI, Ultra SCSI, F ...

  • EMC DS-32B2 - page 557

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-9 Glossar y FCP Fib re C hann el Pr otocol. Map ping of pr oto cols onto the Fi br e Chan nel standar d prot ocols. For example, SCSI FCP maps SCSI-3 onto Fibr e Channel. FC-PH-1, 2, 3 The Fibre Channel Ph ysical and Sign alling Interf ace standards defined by ANSI. FC-PI The Fibr ...

  • EMC DS-32B2 - page 558

    g-10 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y FLOGI Fabric Login. The pr ocess by which an N_Por t determines whether a fabric is pres ent, and if so, exchanges se rvice parameters with it. See also PL OGI. FL_P ort Fabric loo p port. A port that is able to transmit un der fabric protocol and also has arbitrated ...

  • EMC DS-32B2 - page 559

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-11 Glossar y Gatew ay Har dware that connects incom patible network s by providing translation for both hardw are an d softwar e. For example, an A TM gateway can be used to connect a Fibre Channel link to an A T M connection. GBIC Gigabit interfa ce converter . A removable serial ...

  • EMC DS-32B2 - page 560

    g-12 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y I Idle Continuous tran smission of an ordered set over a Fibre Channel lin k when no data is bein g transmitte d, to keep the link active an d maintain bit , byte, and word synchronization . Ini tiato r A server or worksta tion on a Fi bre Channel network that ini ti ...

  • EMC DS-32B2 - page 561

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-13 Glossar y L L_P ort Loop port. A node port (NL_Port) or fabric po rt (FL_Port) that has arbitrated lo op capabilities. An L_Port can be in one of two modes: • Fabric mode: Conn ected to a port that is not loop ca pable, and using fabric protocol. • Loop mode: In an arbitrat ...

  • EMC DS-32B2 - page 562

    g-14 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y Multicast The transmissio n of data from a single source to multiple specified N_Ports (as opposed to all the ports on the network). Se e also Broad cast and Unicas t . Multimode A fiber-optic cabling specifica tion that all ows up to 500 met ers for 1 GB Fib re Chan ...

  • EMC DS-32B2 - page 563

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-15 Glossar y P Pack et A set of info rmation tra nsmitted across a network. S ee also Frame . Participating Mode A mode in which a n L_Port in a lo op has a valid AL_P A and can arbitrate, se nd frames, and retransmit received tran smissi ons. See also L_Port an d Nonparticip atin ...

  • EMC DS-32B2 - page 564

    g-16 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y Priv ate NL_P ort An NL_Port that com municates only w ith other private NL_Ports in the same loop and does no t log in to the fabric. Protocol A defined method a nd a set of standar ds for communicati on. Public Device A device that supports arbitrated loop protocol ...

  • EMC DS-32B2 - page 565

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-17 Glossar y Route As applies to a fabric, the communicatio n path between two switches . May also apply to the specific pa th taken by an indi vidual frame, from source to destinatio n. See als o SFP . Rout ing The as sig nm ent o f fr am es to spe ci fic swit ch port s, a cc ord ...

  • EMC DS-32B2 - page 566

    g-18 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y SI Sequ ence init iati ve. SID/DID S ource identifier/destinatio n identifier . S_ID is a 3-byte field in the frame header that is used to indicate the address iden tifier of the N_Port fr om which th e frame was s ent. Singl e Mod e A Fibre Channel optic cabling sta ...

  • EMC DS-32B2 - page 567

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-19 Glossar y T e rminal Ser ial Port The lower serial port on the CP car d. Receives e rror messages. Ca n be used to connect the CP car d to a computer terminal. Has a DB-9 connector wir es as a ttyS0 DTE device, and can be connected by s erial cable to a DCE d evice. The connect ...

  • EMC DS-32B2 - page 568

    g-20 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y ULP Upper-level Protocol. Th e protocol that runs on top of Fibre Chan nel. T y pical upper-level protocols are SCSI, IP , HIPPI, and IPI. ULP_T OV Up per -le vel t ime- out val ue. T he min imum t ime that a SCSI U LP process waits for SCSI statu s before initiating ...

  • EMC DS-32B2 - page 569

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual g-21 Glossar y Zone Schemes The level of zoning granularity selected. For example, zoning may be done by switch/port, WWN, or a mixture . See also Zone Configuration . Zone Set See Zone Configuratio n . ...

  • EMC DS-32B2 - page 570

    g-22 EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual Glossa r y ...

  • EMC DS-32B2 - page 571

    EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual i-1 A agtcfgDefault 1-8 agt cfgSe t 1-11 agtcfgSh ow 1-1 5 aliasDele te 1-18 alias Join 1- 19 alias Purge 1-21 alias Show 1-22 B back plan etest 1- 32 backpor t 1-35 bcast Show 1 -38 bladeBeacon 1-40 blade diag 1-42 bladed iag short 1-44 bla dePr opSh ow 1-46 C camT est 1-4 7 centra ...

  • EMC DS-32B2 - page 572

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual i-2 Index F fabS tatsSh ow 1-146 fanDisable 1-147 fanEnable 1-148 fanS how 1-149 fastboot 1-150 fazo neAd d 1-1 51 fazon eCreate 1- 153 fazo neDel ete 1- 156 fazo neRem ove 1-157 fazo neShow 1- 159 filterT est 1-161 firmwareCommit 1-164 fir mwareDown load 1 -165 fi r m wa re res t o ...

  • EMC DS-32B2 - page 573

    i-3 EMC Con nectrix DS-32B 2 and ED-1200 0B Fabric OS Reference Manual Inde x portLogDump 1-338 portLogShow 1-340 portLoopbackT est 1-348 portPerfShow 1-351 portRegT est 1-352 portRouteShow 1-354 portSh ow 1-35 7 port StatsS how 1-3 61 psShow 1-368 ptda tashow 1- 370 ptphan tomsh ow 1-371 ptpr ops how 1 -372, 1-373, 1- 374 ptstatssho w 1-3 75 Q qlo ...

  • EMC DS-32B2 - page 574

    EMC Connectr ix DS-32B2 and ED -12000B Fabr ic OS Reference Manual i-4 Index ...

Manufacturer EMC Category Switch

Documents that we receive from a manufacturer of a EMC DS-32B2 can be divided into several groups. They are, among others:
- EMC technical drawings
- DS-32B2 manuals
- EMC product data sheets
- information booklets
- or energy labels EMC DS-32B2
All of them are important, but the most important information from the point of view of use of the device are in the user manual EMC DS-32B2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EMC DS-32B2, service manual, brief instructions and user manuals EMC DS-32B2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EMC DS-32B2.

Similar manuals

A complete manual for the device EMC DS-32B2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EMC DS-32B2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EMC DS-32B2.

A complete EMC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EMC DS-32B2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EMC DS-32B2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EMC DS-32B2, that we can find in the current document
3. Tips how to use the basic functions of the device EMC DS-32B2 - which should help us in our first steps of using EMC DS-32B2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EMC DS-32B2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EMC DS-32B2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EMC DS-32B2?

Use the form below

If you did not solve your problem by using a manual EMC DS-32B2, ask a question using the form below. If a user had a similar problem with EMC DS-32B2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)