English dropdown-ico

Manual Swan SI9030N

11 pages Not applicable
Download

Go to site of 11

Summary
  • Swan SI9030N - page 1

    Instruction Manual steam generator Model: SI9030N ...

  • Swan SI9030N - page 2

    Important safeguards 2 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only . 3. The appliance is intended for household use only . 4. In order to protect against the risk of electric shock, do not immerse iron ､ power base into wat ...

  • Swan SI9030N - page 3

    3 Parts and Features 1. W ater tank; 2. Handle 3. Soleplate; 4. Heating indicator light 5. Steam button 6. Steam button lock 7. Steam button 8. T emperature control dial 9. Power cord/Supply hose 10. Power cord 1 1. Handle button 12. W ater tank release 13. Filter 14. W ater tank decoration indicator light 4 1 2 3 5 12 1 1 13 14 6 7 8 9 10 ...

  • Swan SI9030N - page 4

    4 Fabric Setting Chart T emperature Setting Fabric SYNTHETIC WOOL SILK COTTON LINEN Max Ironing Instruction Steam Selection T emperature control dial Synthetics, Silk, Nylon, Arcrylic, Acetate Wool, Polyester Rayon cotton, Linen Rayon cotton, Linen Dry Iron on the opposite side of the fabric Use a press cloth and Steam Iron on the opposite side of ...

  • Swan SI9030N - page 5

    1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied. T exti ...

  • Swan SI9030N - page 6

    6 1. Check if the rating indicated in the rating plate corresponds to the mains voltage in your home. 2. Press handle button to lay handle down. Fig.1 3. Remove the protective foil or sticker or card from the soleplate. 4. Fully unwind and straighten the power cord and the supply hose. 5. Place the appliance on a stable, level and horizontal surfac ...

  • Swan SI9030N - page 7

    7 1. After power On, water tank indicator light will light up for easy viewing of water level. 2. W ater tank indicator light will not light up when water tank or filter are not properly installed. No steam will be produced even if steam button is pressed. Wa ter tank indicator light 1. Fill water tank with clean water refer to above filling instru ...

  • Swan SI9030N - page 8

    1. Connect the appliance to a suitable socket outlet. W ater tank indicator illuminates to indicate that the unit has been connected to the power supply 2. Set temp setting knob to desired position according to above ironing temperature setting guide or fabric setting chart. Heating indicator light on iron unit will turn on to indicate that the ste ...

  • Swan SI9030N - page 9

    9 Press down steam button lock and then push it backwards, steam button will automatically lock . Steam will be produced continually. If you want to stop steam, please push steam button lock forward. Notice: Always turn steam lock off when resting iron on its base or if you leave the iron unattended Auto-locking function for steam button Pump overh ...

  • Swan SI9030N - page 10

    10 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However , please note that the filter will not completely stop the natural process of limescale build-up. 2. The filter will need to be changed every 2 months on average. The filter can still be used e ...

  • Swan SI9030N - page 11

    11 Problems Iron won’t heat W ater tank indicator OFF and no steam Droplets of water escape from the soleplate Possible causes Incorrect connection to the main socket Re-plug the unit to main socket. T emperature control dail is set at“MIN” position. Set to the required position. Unknown malfunction. T ake it to qualified service man or manuf ...

Manufacturer Swan Category Iron

Documents that we receive from a manufacturer of a Swan SI9030N can be divided into several groups. They are, among others:
- Swan technical drawings
- SI9030N manuals
- Swan product data sheets
- information booklets
- or energy labels Swan SI9030N
All of them are important, but the most important information from the point of view of use of the device are in the user manual Swan SI9030N.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Swan SI9030N, service manual, brief instructions and user manuals Swan SI9030N. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Swan SI9030N.

Similar manuals

A complete manual for the device Swan SI9030N, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Swan SI9030N by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Swan SI9030N.

A complete Swan manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Swan SI9030N - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Swan SI9030N, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Swan SI9030N, that we can find in the current document
3. Tips how to use the basic functions of the device Swan SI9030N - which should help us in our first steps of using Swan SI9030N
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Swan SI9030N
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Swan SI9030N in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Swan SI9030N?

Use the form below

If you did not solve your problem by using a manual Swan SI9030N, ask a question using the form below. If a user had a similar problem with Swan SI9030N it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)