English dropdown-ico

Manual Toro 850S

8 pages 0.49 mb
Download

Go to site of 8

Summary
  • Toro 850S - page 1

    Introduction ______________________________________________________________________ The 830S and 850S series full-circle rotary sprinklers are designed specifically for golf course applications. Manufactured from durable, high-strength engineering plastic and stainless-steel components, these sprinklers incorporate many innovative and time-proven f ...

  • Toro 850S - page 2

    2 66 26.2 31.5 34.1 36.5 74 80 83 31.8 73 32.7 75 36.1 39.5 79 83 41.6 44.2 83 87 48.1 51.6 85 89 850S Series Sprinkler Performance Data 830S Series Sprinkler Performance Data Nozzle Color Code Nozzle Main Inner Intermediate 1 Yellow Yellow Blue 2 Blue Yellow Blue 3 Brown Yellow Orange 4 Orange Yellow Orange 5 Green White Gray 6 Gray White Gray 7 B ...

  • Toro 850S - page 3

    Installation Procedure ___________________________________________________ To assure maximum performance from your 800S series sprinklers, read these instructions completely prior to installation or service. Constructing Swing Joints 1. Construct or provide triple swing joints for each sprinkler as shown in Figure 1 . Use PVC or ABS pipe nipple for ...

  • Toro 850S - page 4

    System Start Up _________________________________________________________ The following is a recommended procedure that will protect system components during system start-up. The procedure is based on a velocity fill rate of less than 2' (.61 m) per second. See Table 3 below. Table 3: Recommended System Fill Rate 1. Use a jockey pump only to f ...

  • Toro 850S - page 5

    ■ Sprinkler Assembly PROBLEM POSSIBLE CAUSE – CORRECTIVE ACTION SPRINKLER WON'T ROTATE (a) Debris wedged between stator and turbine. – Remove obstruction. (b) Drive assembly defective. – Replace drive assembly. (c) Nozzle base assembly defective. – Replace nozzle base assembly. HEAD STICKS UP (a) Dirt in riser assembly. – Flush out ...

  • Toro 850S - page 6

    VALVE WON'T OPEN (a) Plugged controller discharge line or discharge port in pilot valve. (Hydraulic) – Verify by checking for discharge at discharge line when station is activated. If no discharge, refer to Controller Service Manual. SPRINKLER WEEPING (a) Damaged or blocked valve seat. (Slow leak in valve) – Remove blockage and, if necessa ...

  • Toro 850S - page 7

    Servicing Main V alve 1. See WARNING above. To remove valve assembly, squeeze snap ring ears together with snap ring pliers (P/N 995-100) and remove snap ring from sprinkler body. See Figure 4 . 2. Use valve removal tool P/N 995-08 for 830S or 995-09 for 850S to remove valve assembly from base of sprinkler body. Valve removal tool is inserted into ...

  • Toro 850S - page 8

    Servicing Pilot V alve Note: Refer to Figure 7 for the following procedure. 1. Make sure that the water supply to sprinkler is positively shut off and any residual pressure has been bled off. If the sprinkler is pressurized, main valve will open when the pilot valve is disconnected from control tube. 2. Carefully remove turf and soil from side of s ...

Manufacturer Toro Category Sprinkler

Documents that we receive from a manufacturer of a Toro 850S can be divided into several groups. They are, among others:
- Toro technical drawings
- 850S manuals
- Toro product data sheets
- information booklets
- or energy labels Toro 850S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toro 850S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toro 850S, service manual, brief instructions and user manuals Toro 850S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toro 850S.

Similar manuals

A complete manual for the device Toro 850S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toro 850S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toro 850S.

A complete Toro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toro 850S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toro 850S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toro 850S, that we can find in the current document
3. Tips how to use the basic functions of the device Toro 850S - which should help us in our first steps of using Toro 850S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toro 850S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toro 850S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toro 850S?

Use the form below

If you did not solve your problem by using a manual Toro 850S, ask a question using the form below. If a user had a similar problem with Toro 850S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)