English dropdown-ico

Manual Seagate Constellation CS

48 pages Not applicable
Download

Go to site of 48

Summary
  • Seagate Constellation CS - page 1

    Product Manual Constellation CS Serial ATA ® 100695091 Rev. A July 2012 Standard Models Seagate Instant Secure Erase Models ST3000NC002 ST3000NC000 ST2000NC001 ST2000NC000 ST1000NC001 ST1000NC000 ...

  • Seagate Constellation CS - page 2

    © 2012 Seagate Technology LLC. All rights reserved. Publication number: 100695091, Rev. A July 2012 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/ or other countries. Constellation CS and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or ...

  • Seagate Constellation CS - page 3

    Constellation CS Serial ATA Product Manual, Rev. A Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the SATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Dr ...

  • Seagate Constellation CS - page 4

    Constellation CS Serial ATA Product Manual, Rev. A 5.0 SATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.1 Hot-Plug compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.2 SATA device p ...

  • Seagate Constellation CS - page 5

    Constellation CS Serial ATA Product Manual, Rev. A Figures Figure 1 Typical 3TB model 5V - 6Gb/s startup and operation current profile . . . . . . . . . . . . . . . . . . . 8 Figure 2 Typical 3TB model 12V - 6Gb/s startup and operation current profile . . . . . . . . . . . . . . . . . . 8 Figure 3 Typical 2TB model 12V - 6Gb/s startup and operation ...

  • Seagate Constellation CS - page 6

    Constellation CS Serial ATA Product Manual, Rev. A ...

  • Seagate Constellation CS - page 7

    Constellation CS Serial ATA Product Manual, Rev. A v For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For informatio ...

  • Seagate Constellation CS - page 8

    vi Constellation CS Serial ATA Product Manual, Rev. A ...

  • Seagate Constellation CS - page 9

    Constellation CS Serial ATA Product Manual, Rev. A 1 www.seagate.com 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Constellation ® CS Serial ATA model drives: These drives provide the following key features: • 7200 RPM spindle speed. • PowerChoice™ for selectable powe ...

  • Seagate Constellation CS - page 10

    2 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 1.1 About the SATA interface The Serial ATA (SATA) interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump ...

  • Seagate Constellation CS - page 11

    Constellation CS Serial ATA Product Manual, Rev. A 3 www.seagate.com 2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: 2.1 Specification s ...

  • Seagate Constellation CS - page 12

    4 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com * One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * * During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. ...

  • Seagate Constellation CS - page 13

    Constellation CS Serial ATA Product Manual, Rev. A 5 www.seagate.com 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed sectors as defined above . See Section 5.3.1, "Identify Device command" (words 60-61 and 100-103) for additional ...

  • Seagate Constellation CS - page 14

    6 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in ...

  • Seagate Constellation CS - page 15

    Constellation CS Serial ATA Product Manual, Rev. A 7 www.seagate.com * During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase ac oustic and power to operational levels. Table 2: 3TB Drive DC power requirements 3.0Gb mode 6.0Gb mode Voltage +5V +12V +5V +12V Regulation ±5% ±5% ± ...

  • Seagate Constellation CS - page 16

    8 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.8.1.1 Typical current profiles 3TB model current profile Figure 1 Typical 3TB model 5V - 6Gb/s startup and operation current profile Figure 2 Typical 3TB model 12V - 6Gb/s startup and operation current profile ...

  • Seagate Constellation CS - page 17

    Constellation CS Serial ATA Product Manual, Rev. A 9 www.seagate.com 2TB model current profile Typical 2TB model 5V - 6Gb/s startup and operation current profiles Figure 3 Typical 2TB model 12V - 6Gb/s startup and operation current profiles ...

  • Seagate Constellation CS - page 18

    10 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 1TB model current profile Typical 1TB model 5V - 6Gb/s startup and operation current profiles Figure 4 Typical 1TB model 12V - 6Gb/s startup and operation current profiles ...

  • Seagate Constellation CS - page 19

    Constellation CS Serial ATA Product Manual, Rev. A 11 www.seagate.com 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximu ...

  • Seagate Constellation CS - page 20

    12 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power- management modes: • Active mode The dr ...

  • Seagate Constellation CS - page 21

    Constellation CS Serial ATA Product Manual, Rev. A 13 www.seagate.com 2.8.4.1 Extended Power Conditions - PowerChoice TM Utilizing the load/unload architecture a programmable power management interface is provided to tailor systems for reduced power consumption and performance requirements. The table below lists the supported power conditions avail ...

  • Seagate Constellation CS - page 22

    14 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com PowerChoice Manufacture Default Power Condition Timer Values Default power condition timer values have been established to assure product reliability and data integrity. A minimum timer value threshold of two minutes ensures the appropriate amount of background drive maintenance ...

  • Seagate Constellation CS - page 23

    Constellation CS Serial ATA Product Manual, Rev. A 15 www.seagate.com 2.9 Environmental limits Temperature and humidity values experienced by the drive must be such that condensation does not occur on any drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C). Maximum wet bulb temperature ...

  • Seagate Constellation CS - page 24

    16 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.9.3 Altitude 2.9.4 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.4.1 Operating shock These drives comply with the performance levels specified i ...

  • Seagate Constellation CS - page 25

    Constellation CS Serial ATA Product Manual, Rev. A 17 www.seagate.com 2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests ...

  • Seagate Constellation CS - page 26

    18 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.13 Reliability 2.13.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The product shall achieve an Annualized Failure Rate (AFR) of 1.095% (MTBF of 800 thousand hours) when operated nominal power and typical case temperatures of 40°C. Operation at temperatu ...

  • Seagate Constellation CS - page 27

    Constellation CS Serial ATA Product Manual, Rev. A 19 www.seagate.com Korean RRL If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Labora ...

  • Seagate Constellation CS - page 28

    20 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive The European Union Restric ...

  • Seagate Constellation CS - page 29

    Constellation CS Serial ATA Product Manual, Rev. A 21 www.seagate.com specifications will be repaired or replaced, at Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. Seagate will pay for transporting the repair ...

  • Seagate Constellation CS - page 30

    22 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 3.0 Configuring and Mounting the Drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be exposed to potential handling and elec ...

  • Seagate Constellation CS - page 31

    Constellation CS Serial ATA Product Manual, Rev. A 23 www.seagate.com 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer to Figure 7 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow ...

  • Seagate Constellation CS - page 32

    24 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 4.0 About Seagate Instant Secure Erase drives Self-encrypting drives (SEDs) offer encryption and security services for the protection of stored data, commonly known as “protection of data at rest”. 4.1 Data encryption Encrypting drives use one inline encryption engine for eac ...

  • Seagate Constellation CS - page 33

    Constellation CS Serial ATA Product Manual, Rev. A 25 www.seagate.com 5.0 SATA Interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6. For detailed information about the SATA inte ...

  • Seagate Constellation CS - page 34

    26 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 5.2 SATA device plug connector pin definitions Table 5 summarizes the signals on the SATA interface and power connectors. Notes 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connec ...

  • Seagate Constellation CS - page 35

    Constellation CS Serial ATA Product Manual, Rev. A 27 www.seagate.com 5.3 Supported ATA commands The following table lists SATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 3.0 ( http://www .sata-io.org ). See “S.M.A.R.T. commands ...

  • Seagate Constellation CS - page 36

    28 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com Security Set Password F1 H Security Unlock F2 H Seek 70 H Set Features EF H Set Max Address F9 H Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right. Address: Password: Lock: Unlock: Freeze Lock: 00 ...

  • Seagate Constellation CS - page 37

    Constellation CS Serial ATA Product Manual, Rev. A 29 www.seagate.com 5.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown on page 27. All reserved bits or words should be ...

  • Seagate Constellation CS - page 38

    30 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 59 Number of sectors transferred during a Read Multiple or Write Multiple command xxxx H 60–61 Total number of user-addressable LBA sectors available (see Section 2.2 for related information) *Note: The maximum value allowed in this field is: 0FFFFFFFh (268,435,455 sectors, 137 ...

  • Seagate Constellation CS - page 39

    Constellation CS Serial ATA Product Manual, Rev. A 31 www.seagate.com 93 Hardware reset value 0000 H 95–99 ATA-reserved 0000 H 100–103 Total number of user-addressable LBA sectors available (see Section 2.2 for related information). These words are required for drives that support the 48-bit addressing feature. Maximum value: 0000FFFFFFFFFFFFh. ...

  • Seagate Constellation CS - page 40

    32 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com Bit Word 84 0 SMART error login is supported. 1 SMART self-test is supported. 2 Media serial number is supported. 3 Media Card Pass Through Command feature set is supported. 4 Streaming feature set is supported. 5 GPL feature set is supported. 6 WRITE DMA FUA EXT and WRITE MULTIP ...

  • Seagate Constellation CS - page 41

    Constellation CS Serial ATA Product Manual, Rev. A 33 www.seagate.com 5.3.2 Set Features command This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register do ...

  • Seagate Constellation CS - page 42

    34 Constellation CS Serial ATA Product Manual, Rev. A www.seagate.com 5.3.3 S.M.A.R.T. commands S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R ...

  • Seagate Constellation CS - page 43

    Constellation CS Serial ATA Product Manual, Rev. A 35 A ACA 19 acoustics 17 Active 12 Active mode 12 actuator arm 6 AES-256 24 Agency certification 18 altitude 16 ambient 15 Ambient temperature 15 ambient temperature 6 Annualized Failure Rate 18 Annualized Failure Rate (AFR) 18 areal density 5 ATA commands 27 Australia/New Zealand Standard AS/NZ CI ...

  • Seagate Constellation CS - page 44

    36 Constellation CS Serial ATA Product Manual, Rev. A logical geometry 5 M maintenance 18 master/slave 2 maximum start current 7 mounting 23 mounting screws 16 mounting the drive 22 N noise 11 nominal power 6 non-operating temperature 15 Nonoperating shock 16 Nonoperating vibration 16 Nonrecoverable read errors 18 NOP 27 O Operating power 6 Operati ...

  • Seagate Constellation CS - page 45

    Constellation CS Serial ATA Product Manual, Rev. A 37 Standby Immediate 28 Standby mode 6, 12 standby timer 12 Standby to Ready 6 Start/stop times 6 static-discharge 22 subassembly 19 Surge immunity 17 T temperature 6, 15 non-operating 15 timer 12 timers 12 track density 5 Track-to-track 6 Track-to-track seek time 6 U UL60950-1 18 V Vibration 16 vo ...

  • Seagate Constellation CS - page 46

    ...

  • Seagate Constellation CS - page 47

    ...

  • Seagate Constellation CS - page 48

    Seagate Technology LLC AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Bo ...

Manufacturer Seagate Category Hard Drive

Documents that we receive from a manufacturer of a Seagate Constellation CS can be divided into several groups. They are, among others:
- Seagate technical drawings
- Constellation CS manuals
- Seagate product data sheets
- information booklets
- or energy labels Seagate Constellation CS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Seagate Constellation CS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Seagate Constellation CS, service manual, brief instructions and user manuals Seagate Constellation CS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Seagate Constellation CS.

Similar manuals

A complete manual for the device Seagate Constellation CS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Seagate Constellation CS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Seagate Constellation CS.

A complete Seagate manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Seagate Constellation CS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Seagate Constellation CS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Seagate Constellation CS, that we can find in the current document
3. Tips how to use the basic functions of the device Seagate Constellation CS - which should help us in our first steps of using Seagate Constellation CS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Seagate Constellation CS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Seagate Constellation CS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Seagate Constellation CS?

Use the form below

If you did not solve your problem by using a manual Seagate Constellation CS, ask a question using the form below. If a user had a similar problem with Seagate Constellation CS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)