English dropdown-ico

Manual Blodgett KLS-DS

13 pages 0.61 mb
Download

Go to site of 13

Summary
  • Blodgett KLS-DS - page 1

    1 KLS-DS and KPS-DS Series DIRECT STEAM TRI-LEG STATIONARY KETTLE AND DIRECT STEAM PEDESTAL STATIONARY KETTLE INSTALLATION – OPERATION – MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05 401 USA Telephone (800) 33 1-5842, (802) 860 -3700 Fax: (802) 864-0183 S00055 Rev B (10/04) ...

  • Blodgett KLS-DS - page 2

    2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey a ll safety messages that follow this symbol to avoid possible injury or death. WARNING: Improper ...

  • Blodgett KLS-DS - page 3

    3 TABLE OF CONTENTS DESCRIPTION PAGE 1.0 Installation and Service Connections 4 2.0 Installation Instructions 6 3.0 Introduction 7 4.0 Operating Instructions 8 5.0 Cleaning Procedures 9 6.0 Troubleshooting Maintenance 12 ...

  • Blodgett KLS-DS - page 4

    4 1.0 SERVICE CONNECTIONS – KLS-DS F E C L D WAL L SAFETY RELIEF VA LV E 2" V AL VE: CLOSED 5.13 [130] OPENED 6.88 [175] 3” V AL VE: CLOSED 7.88 [200] OPENED 10.13 [257] S 4 5 ° 3.5 [89] A B C OPTIONAL F AUCET ALLOW DIMENSION “D” ADDITIONAL 6 [152] S S 7" ON YOKE TYPE HINGES (ST ANDARD ON 20-40 GALLON KETTLES) 2-1/2" ON SPRI ...

  • Blodgett KLS-DS - page 5

    5 SERVICE CONNECTIONS – KPS-DS NOTE: DIMENSIONS F AND G ARE BASED ON Ø2" DRA W-OFF V AL VE. OTHER V A L V ES V AR Y A CCORDINGL Y . 4 HOLES Ø 7/16 [1 1] EQUALL Y SP ACED FRONT PEDESTAL DETAIL 45° Ø K WAL L CLOSED 5 .5 [140] OPENED 7.5[191] SAFETY RELIEF VA L V E F D E 45° C L S OPTIONAL F AUCET ALLOW DIMENSION "D" ADDITIONAL 6 ...

  • Blodgett KLS-DS - page 6

    6 2.0 INSTALLATION INSTRUCTIONS 1. Select a location to provide drainage directly below the tangent Draw-off Valve. 2. Mark hole locations through flanged adjustable feet on KLS-DS models and through pedestal base on KPS-DS models. Remove kettle. 3. On hole locations marked, drill holes and insert expansion shield s to accommodate 5/16" size l ...

  • Blodgett KLS-DS - page 7

    7 3.0 INTRODUCTION DESCRIPTION All Crown direct connected steam jacketed kettles pertaining to this manual are direct steam operated pressure vessels of a double-wall stainl ess steel construction forming a steam chamber (jacket) enveloping the lower two thirds of the kettle bowl surface. All kettles are st ationary, floor mounted in fixed position ...

  • Blodgett KLS-DS - page 8

    8 4.0 OPERATING INSTRUCTIONS CAUTION: THE APPLIANCE AND IT S PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE APPLIANCE. OPERATING PROCEDU RE 1. Ensure that draw-off valve is closed. 2. Fill kettle with product to desired level. 3. Slowly turn the steam control valve ON to full open position (counter clockwise). 4. The water or foo ...

  • Blodgett KLS-DS - page 9

    9 5.0 CLEANING INSTRUCTIONS CAUTION: Do not use cleaning agents that are corrosive. WARNING: Disconnect the power supply to the appliance before cleaning or servicing. WARNING: Never spray water into electric controls or components! CAUTION: The equipment and its parts are hot. Use care when operating, cleaning and servicing. Your kettle should be ...

  • Blodgett KLS-DS - page 10

    10 3. Leave the draw-off valve open when the kettle is not in use. DAIRY DRAW-OFF VALVE CLEANING 1. Remove the plug by first removing the handle, then turn the plug to line up with the pin and pull with both hands. It is important to use both hands because the plug is heavy. 2. Put the plug in a plastic pail that contains a mild soap solution. A pl ...

  • Blodgett KLS-DS - page 11

    11 STAINLESS STEEL To remove normal dirt, grease or product residue from stainless steel, use ordinary soap and water (with or without detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never use vinegar or any other corrosive cleaner. To remove grease and food splatters or condensed vapours that have baked on the equipme ...

  • Blodgett KLS-DS - page 12

    12 6.0 TROUBLESHOOTING MAINTENANCE PREVENTIVE MAINTENANCE No preventive maintenance is required other than adhering to the Cleaning Procedure instructions. DRAW-OFF VALVE LEAKS If a leak occurs through the valve stem, replace the “O” ring. If the leak can be attributed to faulty seali ng occurring between the stem disc and valve seat, then this ...

  • Blodgett KLS-DS - page 13

    13 TROUBLESHOOTING MAINTENANCE (continued) VENTING It is recommended that the “optional” steam trap assembly be installed. This should be plumbed to the exit end of the kettle. The thermostatic trap is a mechanical device that closes on high temperature and opens when the temperature drops, allowing the water which formed from condensate to exh ...

Manufacturer Blodgett Category Hot Beverage Maker

Documents that we receive from a manufacturer of a Blodgett KLS-DS can be divided into several groups. They are, among others:
- Blodgett technical drawings
- KLS-DS manuals
- Blodgett product data sheets
- information booklets
- or energy labels Blodgett KLS-DS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Blodgett KLS-DS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Blodgett KLS-DS, service manual, brief instructions and user manuals Blodgett KLS-DS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Blodgett KLS-DS.

Similar manuals

A complete manual for the device Blodgett KLS-DS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Blodgett KLS-DS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Blodgett KLS-DS.

A complete Blodgett manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Blodgett KLS-DS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Blodgett KLS-DS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Blodgett KLS-DS, that we can find in the current document
3. Tips how to use the basic functions of the device Blodgett KLS-DS - which should help us in our first steps of using Blodgett KLS-DS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Blodgett KLS-DS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Blodgett KLS-DS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Blodgett KLS-DS?

Use the form below

If you did not solve your problem by using a manual Blodgett KLS-DS, ask a question using the form below. If a user had a similar problem with Blodgett KLS-DS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)