English dropdown-ico

Manual Star Trac IP-S1315

14 pages 3.25 mb
Download

Go to site of 14

Summary
  • Star Trac IP-S1315 - page 1

    LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS ...

  • Star Trac IP-S1315 - page 2

    Page 2 Copyright 2009. Star Trac by Unisen, Inc. All rights rese rved, including those to reproduce this book or parts thereof in an y form without firs t obtaining writ ten permissi on from Star T rac. Every effort has been made to keep this information current; however, periodic ally, changes are made to the information herein, and these c hanges ...

  • Star Trac IP-S1315 - page 3

    Page 3 INSTALLATION INSTRUCTIONS 1 • TORQUE WRENCH ••••••••••••••• •••• •••••••••••••• ••••••• 1 • 8MM HEX KEY SOCKET ••••••••• •••••••••• ••••••••••• ••• • #2 CROSS-HEAD (PHILLIPS) SCREWDRIVER •? ...

  • Star Trac IP-S1315 - page 4

    Page 4 2. Grip the top of the outside SHROUD and l ift to remove it from the we ight stack. Carefully store th e SHROUD for late r use. Now repeat with the inside SHROUD. REMOVE THE SHROUDS: 1. Using a 4MM hex key remove the (M6,30M M,Button Head Bolt) from the rear of the weight stack. Save th is bolt as you will need it to re-install later. After ...

  • Star Trac IP-S1315 - page 5

    Page 5 INSTALLING THE WELDED CROSS SUPPORT: 1. Locate the CROSS SUPPORT and align the holes as sho wn. INSTALLING THE WELDED CROSS SUPPORT, FRONT SCREWS: 1. Use three ( M8 , 25MM, Button Head Bolt), three (M8, Nyloc Nut), and six (M8,Washers) to ins tall and tighten the WELDED CROSS SUPPORT, as shown. 2. Use one (M8, 105 MM Button Head Bol t), one ...

  • Star Trac IP-S1315 - page 6

    Page 6 INSTALLING THE ROM ADJUST AND CAM ASSEMBLY: 1. Locate (from left to right) one (M8, 20MM, Socket Head Cup sc rew), one (M8, Wa sher), two (Taper Bearings) and the ROM ADJUST ASSEMBLY as shown. 2. Insert a taper bea ring to the shaft of the ROM ADJUST ASSEMBLY u ntil it bottoms all t he way again st the ROM PLATE. 3. Place the assembly into t ...

  • Star Trac IP-S1315 - page 7

    Page 7 INSTALLING THE CAM ASSEMB LY : 5. Align the flat on the shaft with the D- Shaped slot on the CAM ASSEMBLY. INSTALLING THE SHIN PAD ASSEMBLY: 1. Locate one 20MM dia meter SHAFT wi th a flat and the SHIN PAD assembly. 2. Align the SHIN PAD asse mbly to the ROM ADJUST BRACKET, as shown. 3. Insert the 20MM SHAF T with a flat. 4. Install two (M8, ...

  • Star Trac IP-S1315 - page 8

    Page 8 INSTALLING THIGH PAD SUPPORT: 1. Install the THIGH PAD SUPPORT along with one (M8, 20MM Socket Head Screw), one (M8, 1MM Thick Washer), (End Cap Without Groo ve), and two (25MM ID Machine Washers). Use a 6mm hex key soc ket to tighten. INSTALLING THE S EAT BACK: 1. Install t he SEAT BACK WELDMENT with UPHOLSTERY using four (M8, 16mm Sock et ...

  • Star Trac IP-S1315 - page 9

    Page 9 ATTACHING THE CABLE: 1. Pull and insert the CABLE END into the CABLE MOUNT of the CAM until the end of the CABLE is visible in the sight hole. 2. Secure with the four sets screw s (M8) included, us ing a 4MM he x key. Torque to 15-17 N- m. INSTALL THE CABLE: 1. Locate the loose cab le end and loop around the pulley as shown mak ing sure not ...

  • Star Trac IP-S1315 - page 10

    Page 10 GUIDE ROD LUBRICATION: 1. Apply a general pu rpose lubricant (such as 3-in-1 oil) that does not contain Teflon to a cotton cloth, then run the cotton cloth up and down the gu ide rods as needed. 2. Also apply oil to the inc remental weight guide tracks. 3. Verify that the Top Plate and Increm ental Plate slide smoo thly. Incremental Guide T ...

  • Star Trac IP-S1315 - page 11

    Page 11 GAP SCREWS INCREMENTAL WEIGHT ADJUST MENT: 1. Check to make sure the gap between the TOP PLATE pin and the 20 mm hole of the INCREMENTAL WEIGHT pl ate is 3mm or l ess when engage. 2. If gap is greate r than 3mm, loo sen but do not remove the two BUTTON HEAD SCREWS (M 6) using a 4MM hex key. 3. Slide the brac ket up or down to create a 3mm g ...

  • Star Trac IP-S1315 - page 12

    Page 12 INSTALLING THE TOP BUMPER: 1. After both shrouds have been installed install the bl ack TOP BUMPER by first inserting the two tabs (1) found on the large end of the TOP BUMPER into the equipment main frame. Now rotate (2) the TOP BUMPER down un til it is sittin g flush on top of the weight frame. Install the (M6,30M M,Button Head Bolt) (3) ...

  • Star Trac IP-S1315 - page 13

    Page 13 ...

  • Star Trac IP-S1315 - page 14

    Part No. 620-7929, Rev B., 21 Aug 09 STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 www.startrac.com ...

Manufacturer Star Trac Category Home Gym

Documents that we receive from a manufacturer of a Star Trac IP-S1315 can be divided into several groups. They are, among others:
- Star Trac technical drawings
- IP-S1315 manuals
- Star Trac product data sheets
- information booklets
- or energy labels Star Trac IP-S1315
All of them are important, but the most important information from the point of view of use of the device are in the user manual Star Trac IP-S1315.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Star Trac IP-S1315, service manual, brief instructions and user manuals Star Trac IP-S1315. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Star Trac IP-S1315.

Similar manuals

A complete manual for the device Star Trac IP-S1315, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Star Trac IP-S1315 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Star Trac IP-S1315.

A complete Star Trac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Star Trac IP-S1315 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Star Trac IP-S1315, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Star Trac IP-S1315, that we can find in the current document
3. Tips how to use the basic functions of the device Star Trac IP-S1315 - which should help us in our first steps of using Star Trac IP-S1315
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Star Trac IP-S1315
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Star Trac IP-S1315 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Star Trac IP-S1315?

Use the form below

If you did not solve your problem by using a manual Star Trac IP-S1315, ask a question using the form below. If a user had a similar problem with Star Trac IP-S1315 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)