English dropdown-ico

Manual Tektronix AWG5000 Series

90 pages 11.44 mb
Download

Go to site of 90

Summary
  • Tektronix AWG5000 Series - page 1

    www.tektronix.com 071-2078-01 AWG5000 Series Arbitrary Waveform Generators Quick Start User Manual ...

  • Tektronix AWG5000 Series - page 2

    Cop yright © T ektronix. All rights reser ved. Licensed software products are ow ned by T ektronix or its subs idiaries or suppliers, and are protected by national cop yright la ws and international treaty provisions. T ektronix products are cov ered by U .S. an d f oreign patents, is sued and pending. Inf or mation in this publ ication supercedes ...

  • Tektronix AWG5000 Series - page 3

    W arranty 2 T ektronix warrants that this product will be free from def ects in mater ials and workm anship f or a per iod of one (1) y ear from the date of shipment. If any such product prov es defectiv e dur ing this w a rranty period, T ektronix, at its option, either will repair the defectiv e product without charge f or par ts and labor , or w ...

  • Tektronix AWG5000 Series - page 4

    ...

  • Tektronix AWG5000 Series - page 5

    T able of Contents A WG5000 Ser ies Quic k Star t User Manual i T able of Contents General Saf ety Summar y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Environ mental Considerations . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Tektronix AWG5000 Series - page 6

    T able of Contents ii A WG5000 Ser ies Quic k Star t User Manual Using Set W av ef o rm and Inser t W a vef or m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Using P aste-Inser t and P aste-Replace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Tektronix AWG5000 Series - page 7

    General Saf ety Summar y A WG5000 Ser ies Quic k Star t User Manual iii General Safety Summary Re view the f ollowing saf ety precautions to av oid injur y and pr e vent da mage to this product or an y products connected to it. T o av oid potential hazards , use this product only as specified. Only qualified personne l should perf or m ser vice pro ...

  • Tektronix AWG5000 Series - page 8

    General Saf ety Summar y iv A WG5000 Ser ies Quic k Star t User Manual T erms in this Man ual These terms may appe ar in this manual: Symbols and T erms on the Pr oduct These terms may a ppear on the product: ■ D AN GER indicates an injury hazard immedi ately accessib le as y ou read the ma rking. ■ W ARNING indica tes an injur y hazard not imm ...

  • Tektronix AWG5000 Series - page 9

    Environmental Consider ations A WG5000 Ser ies Quic k Star t User Manual v En vironmental Considerations This section pro vides inf or mation about the en vironmental impact of the product. Product End-of-life Handling Observe the f ollowing guidelines when recycling an instrument or comp onent. Equipment Recyc ling. Production of this equipment re ...

  • Tektronix AWG5000 Series - page 10

    Environmental Consider ations vi A WG5000 Ser ies Quic k Star t User Manual ...

  • Tektronix AWG5000 Series - page 11

    Pref ace A WG5000 Ser ies Quic k Star t User Manual vii Preface This manual describes the installation and op eration of A WG5000 series instru ments . Basic oper ations and con cepts are presented in t his manual. F or more detaile d inf ormation, see the online h elp on y our instrument. The f ollowing instruments are suppor t ed by this manual: ...

  • Tektronix AWG5000 Series - page 12

    Pref ace viii A WG5000 Ser ies Quic k Star t User Manual Documentation Additional inf or mation is a v ailabl e through a v ariety of sources . Re vie w the f ollowing tab le to locate more inf ormation about this product. Con ventions Used in this Manual The f ollowing icons are use d throughout this manual. T o read about Use these documents Inst ...

  • Tektronix AWG5000 Series - page 13

    Install Y our Instrument A WG5000 Ser ies Quic k Star t User Manual 1 Install Y our Instrument Unpack the instrument and chec k that you receiv ed all items listed as Standard Accessories . Recommende d accessories and instrument options are list ed in the online help . Check the T ektronix Web sit e (ww w .tek tro ni x.c om ) f or th e m ost c urr ...

  • Tektronix AWG5000 Series - page 14

    Install Y our Instrument 2 A WG5000 Ser ies Quic k Star t User Manual Operating Requirements P ower Supply Requirements Cleaning Inspect the arbi trary wa ve f orm gener ator as of ten as oper ating conditions req uire. T o clean the e xterior surface , perform the f ollowing steps: 1. Remov e loose dust on the outside of the instrument with a lint ...

  • Tektronix AWG5000 Series - page 15

    Install Y our Instrument A WG5000 Ser ies Quic k Star t User Manual 3 P o wering On the Instrument P o wering Off the Instrument 1. Connect the A C power cord to the rear of the instrument. 2. Use the front-panel po wer b utton to s witch the instrument on. 1. Use the front-panel po wer b utton to star t the shutdo wn process. W ait appro ximately ...

  • Tektronix AWG5000 Series - page 16

    Install Y our Instrument 4 A WG5000 Ser ies Quic k Star t User Manual Windows Interface Guidelines Because the inst rument uses the Microsoft Windo ws interf ace, you hav e open access to the Windo ws operating system. Y ou can access the Windows de sktop to load and run other Windows-based ap plications such as Micro soft Excel, W ord- Pa d , a n ...

  • Tektronix AWG5000 Series - page 17

    Install Y our Instrument A WG5000 Ser ies Quic k Star t User Manual 5 Connecting to a Netw ork Y ou can connect y our instrument to a netw ork for printing, file sharing, internet access, and other functions. Consult with y ou r network administrator and use the st andard Windows utilities to configure the instrument f or your netw ork. F or settin ...

  • Tektronix AWG5000 Series - page 18

    Install Y our Instrument 6 A WG5000 Ser ies Quic k Star t User Manual Offline Mode The Offline Mode is a function that you ca n use to run the instrument ap plication on y our PC. Inst all the application o n your PC; the instrument hardw are is not required. Y ou can create and edit the instrument setups. The setup files tha t you create can be us ...

  • Tektronix AWG5000 Series - page 19

    Install Y our Instrument A WG5000 Ser ies Quic k Star t User Manual 7 Inspect Y our Instrument T wo types of diagnostics a re pro vided to v erify the function ality of y our instrument: ■ P ower-on self test – Every time you po wer on the instrument, the instrument automatically p erf or ms the internal diagnostics. ■ Diagnostics from the Sy ...

  • Tektronix AWG5000 Series - page 20

    Install Y our Instrument 8 A WG5000 Ser ies Quic k Star t User Manual Self Calibration The self calibr ation uses internal calibration routines that chec k electrical characteristics such as analog le vel accur acy , and then adjust the internal calibration constants as neces sar y . NO TE. P ower on the instrument and allo w a 20 minute w arm-up p ...

  • Tektronix AWG5000 Series - page 21

    Install Y our Instrument A WG5000 Ser ies Quic k Star t User Manual 9 Preventing Instrument Dama g e Overheat Protection The internal instrument temperature is monitored and the instrument is protected ag ainst ov erheating damage b y the f ollowing actions: ■ A warning message will appear if the internal temperature reaches the first th reshold ...

  • Tektronix AWG5000 Series - page 22

    Install Y our Instrument 10 A WG5000 Ser ies Quic k Star t User Manual Accessing Online Help The arbitr ar y w av eform generator pr ovides tw o types of online help: ■ User online help – In-d epth inf or mation is a v ailable in the online help on all the f eatures of your inst rument. ■ Progra mmer online help – The in strument off ers pr ...

  • Tektronix AWG5000 Series - page 23

    F ront Panel A WG5000 Ser ies Quic k Star t User Manual 11 Fr ont P anel The f ollowing figu re shows the front panel of the A WG5014: Front P anel Connectors Connector Description 1. Ch 1 Analog Output These connectors supply analog signals . Connector type: BNC 2. Ch 1 Marker Output These connectors supply marker 1 and mark er 2 signals . Connect ...

  • Tektronix AWG5000 Series - page 24

    Rear P anel 12 A WG5000 Ser ies Quic k Star t User Manual Rear P anel Rear P anel Connectors Connector Description 1. 10 MHz Ref erence Output Output connector f or 10 MHz ref erence cloc k signal Connector T ype: BNC 2. Ref erence Cloc k Input Input connector f or e xternal reference cloc k Connector T ype: BNC 3. Oscillator Output Output connecto ...

  • Tektronix AWG5000 Series - page 25

    Control P anel A WG5000 Ser ies Quic k Star t User Manual 13 Contr ol P anel The f ollowing figu re shows the front panel controls of a f our channel model: Run. The Run but ton is used to sta r t and stop the sign al generatio n. If the signal is being gener ated, the LED indica tor lights up . T o output the signal through the outpu t connectors, ...

  • Tektronix AWG5000 Series - page 26

    Control P anel 14 A WG5000 Ser ies Quic k Star t User Manual All Outputs On/Off . If one or more Outputs are on, the y will all be tu r ned off when y ou push the All Outputs On/Off b ut- ton. If all Out puts are off , they will all be turned on when y ou push the All Out puts On/Off b utton. Amplitude. When you p ush this b utton, the amplitude pa ...

  • Tektronix AWG5000 Series - page 27

    Control P anel A WG5000 Ser ies Quic k Star t User Manual 15 T o Lock/Unloc k the Front P anel Contr ols The front panel ma y be loc ke d by a remote user while the arbitrary wa v ef orm generator is being remotely controlled via GPIB or Ethernet. When the front panel is loc ked, all k eys and b uttons are disab led exce pt the po wer s witch. Y ou ...

  • Tektronix AWG5000 Series - page 28

    Control P anel 16 A WG5000 Ser ies Quic k Star t User Manual Changing Contr ol Settings As you config ure the instrument, you ma y need to set a numerical parameter such as an amplitude le vel or offset . T o set these paramete rs in a screen window , touch or clic k the par ameter to select it. Once the par ameter is selected, the gener al purpose ...

  • Tektronix AWG5000 Series - page 29

    Control P anel A WG5000 Ser ies Quic k Star t User Manual 17 Run State Contr ol and Output On/Off Do the f ollowing steps to contro l the star t and s top of signal gener ation for the arbitrary wa vef or m gener ator. Quick Tips ■ Y ou can turn each channel’ s output on/off indepen dently . ■ Analog output an d marker output are enab led or ...

  • Tektronix AWG5000 Series - page 30

    Interf ace and Displa y 18 A WG5000 Ser ies Quic k Star t User Manual Interface and Displa y The screen interf ace gives y ou access to the complete fun ctionality of the instrument. Thi s user interf ace is built on the Windows oper ating system. Screen Interface Menu Bar . The menu bar pro vides access to all of the instrument functions. Whe n yo ...

  • Tektronix AWG5000 Series - page 31

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 19 Basic Steps f or Using the Arbitrary W avef orm Generator After you hav e powered on the inst rument, use the ap plication’ s me nu bar or control windows to create and edit a wav e - f orm. For accessing men us and control windows , see page 20. Do the f ollowing steps to outp ...

  • Tektronix AWG5000 Series - page 32

    Interf ace and Displa y 20 A WG5000 Ser ies Quic k Star t User Manual Accessing Menus and Contr ol Windows Y ou can access men u commands and cont rol windows using the f ollowing techniques: 1. Click Settings from the menu bar , and then select a command. The selected item in the Settings windo w will become active . 2. For a shor tcut to sett ing ...

  • Tektronix AWG5000 Series - page 33

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 21 Displa y/Hide Contr o l Windo ws The arbitr ar y wa vef o rm generator displa ys four co ntrol windows b y default. Y ou can quic kly hide or displa y each window using the win dow tag. 1. By def ault, f our windows are display ed if the Run mode is Seque nce. 2. Click the W av ef ...

  • Tektronix AWG5000 Series - page 34

    Interf ace and Displa y 22 A WG5000 Ser ies Quic k Star t User Manual Status Bar Status Bar has tw o functions . It displa ys the current status of the instrument, such as Sampling Rat e, Run Sta te, and Run Mode. It also has action buttons, such as Force T rig ger , Force Ev ent, All Outputs On/Off, and Run. 1. Sampling Rate Current sampling rate ...

  • Tektronix AWG5000 Series - page 35

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 23 W avef orm List Window The W ave f or m List windo w lists the wa v ef orms that are sav ed in the setup files (*.A WG). The instrument provides two typ es of wa vef or m list (predef ined and user-defin ed). Quick Tips ■ If y ou right-click on this window , a pop-up menu is dis ...

  • Tektronix AWG5000 Series - page 36

    Interf ace and Displa y 24 A WG5000 Ser ies Quic k Star t User Manual Sequence Windo w When Sequence is se lected in the Run Mode, this window sho ws information on the st atus of the sequ ence settings . F or Run Mode, see page 29. Quick Tips ■ If y ou click o n a cell in the Sequence windo w , the selected wa vef or m is display ed in the W av ...

  • Tektronix AWG5000 Series - page 37

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 25 W avef orm Window A selected element in the Sequence windo w or a selected wa v ef orm on the Ch n page of the Settin gs window is displa yed in the W av ef o rm window . Quick Tips ■ Y ou can change the displa y format of the Sequence window or the W av ef orm window using the ...

  • Tektronix AWG5000 Series - page 38

    Interf ace and Displa y 26 A WG5000 Ser ies Quic k Star t User Manual Settings Window Use the Settings windo w tabs to quic kly access the Lev el (Ch 1, Ch 2, Ch 3, and Ch 4), Timing, Run Mode, T r igger , Ev ent, or DC Output par ameters. Y ou can also use the front-panel b uttons f or selecting frequently accessed par ameters , such as amplitude ...

  • Tektronix AWG5000 Series - page 39

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 27 Digital Output Quick Tip ■ Each channel has independent output on/off control. When the output statu s of Ch n is set to On, both analog output and digital output are enab led. 1. The A WG5002/A WG5012 Option 03 suppor ts digital data out put. The SMB connectors f or 14 bit digi ...

  • Tektronix AWG5000 Series - page 40

    Interf ace and Displa y 28 A WG5000 Ser ies Quic k Star t User Manual Timing P age Quick Tips ■ The Sampling Rate can be set when the internal clock source is se lected and one of t he f ollo wing conditio ns is met: ■ Internal is selected as the reference source . ■ External is selected as the reference source and Fi xed is sele cted as the ...

  • Tektronix AWG5000 Series - page 41

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 29 Run Mode P age Quick Tip ■ The arbitrary wa v ef or m genera tor suppor ts the f ollowing f our run modes: ■ Continuous – A continuous w a v ef orm is output. ■ Tr i g g e r e d – A wav eform is output once when the instrument rece ives a t rigger signal. The instr ument ...

  • Tektronix AWG5000 Series - page 42

    Interf ace and Displa y 30 A WG5000 Ser ies Quic k Star t User Manual Tr i g g e r P a g e Quick Tips ■ T r igger par ameters control the s ignal outputs of the instrument. T r igger par ameters cannot be s et if Continu ous is selected in the Run Mode. ■ Y ou can also control the trigger by p ushing the front-pane l F orce T r igger b utton in ...

  • Tektronix AWG5000 Series - page 43

    Interf ace and Display A WG5000 Ser ies Quic k Star t User Manual 31 Event P age Y ou can use th e Ev ent page when the Run mode is Seque nce. Quick Tips ■ Ev ent J ump can chang e the sequence orde r using an e vent sig nal. ■ J ump timing is applied to both Ev ent Jump and F orce Jump . See page 67 f or jump in sequence . ■ Y ou can also us ...

  • Tektronix AWG5000 Series - page 44

    Interf ace and Displa y 32 A WG5000 Ser ies Quic k Star t User Manual Default Setup Push the front-panel F actory Default button to recall the f actor y defau lt settings. Instrument Settings at P o wer -on Y ou can select the in strument se ttings that are resto red when you pow er on the instr ument. 1. T o quic kly return to the f actor y def au ...

  • Tektronix AWG5000 Series - page 45

    Using the File Menu A WG5000 Ser ies Quic k Star t User Manual 33 Using the File Menu Use the File men u f or basic file ope rations such as sa ving/recalling instrument setups or impor ting/e xpor ting wa vef orm data. Y ou can also use the File menu f or standard Windows operatio ns such as loading the most recent setup files. The f ollowing menu ...

  • Tektronix AWG5000 Series - page 46

    Using the File Menu 34 A WG5000 Ser ies Quic k Star t User Manual Saving an Instrument Setup Use the f ollowing steps to sa ve an instrument setup: Quick Tips ■ If a setup file contains I nteger f o rmat wa vef or m(s), the file siz e is reduced. F or more inf or mation about wa vef o rm data f ormat (Real or Integer), ref er to the online help . ...

  • Tektronix AWG5000 Series - page 47

    Using the File Menu A WG5000 Ser ies Quic k Star t User Manual 35 Recalling an Instrument Setup Y ou can recall an ins trument setup from the File menu or from Windows Explorer . Quick Tips ■ The arbitrary wa ve f orm generator uses a setup file that ha s an e xtension .A WG. Only .A WG files are displa yed o n the Open File dialog b o x by d ef ...

  • Tektronix AWG5000 Series - page 48

    Using the File Menu 36 A WG5000 Ser ies Quic k Star t User Manual Impor ting W a vef orm Data Data impor t functions a llow y ou to use wa v ef orm data created outside the arbitrary wa v ef orm generator. Y o u can import data to create a ne w wa vef or m or to replace e xisting wa v ef o rm data. The arbitr ar y w av eform generator supports the ...

  • Tektronix AWG5000 Series - page 49

    Using the File Menu A WG5000 Ser ies Quic k Star t User Manual 37 4. Select a file to impor t. 5. Select an impor t action in the Operation frame. ■ Set to Select the channel and in de x num- ber . The impor ted wav ef o rm data will be assigned to the specified position. ■ Inser t before The impor ted wa v ef or m data will be inser ted bef or ...

  • Tektronix AWG5000 Series - page 50

    Using the File Menu 38 A WG5000 Ser ies Quic k Star t User Manual 8. If the file f ormat is T ektronix A WG5000 series or A WG7000 series, the A WG File Impor t dialog bo x is displayed . Select a wa vef orm to impor t. 9. Click OK . The selected w av eform is impor ted. Y ou can select multiple wa vef orms. 10. If the file f ormat is T ektronix DT ...

  • Tektronix AWG5000 Series - page 51

    Using the File Menu A WG5000 Ser ies Quic k Star t User Manual 39 Quick Tips ■ When creating a new w a vef or m, the name of the import ed file will be the name of created wa vef orm. ■ By e x ecuting the file impor t function, the e xisting wav eform is changed to be the same length as the impor ted file . 12. If te xt file f ormat is selected ...

  • Tektronix AWG5000 Series - page 52

    Using the File Menu 40 A WG5000 Ser ies Quic k Star t User Manual Expor ting W a vef orm Data The arbitr ar y w av eform generator can e xpor t wa v ef orm data to a te xt file f or use with other applications . Quick Tips ■ Y ou can select one of the f ollowing file f ormats for e xpor t: ■ T ext (*.txt) ■ T ext – Digital 14 bits (*.txt) ? ...

  • Tektronix AWG5000 Series - page 53

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 41 Using the Edit Menu Use the Edit menu to cr eate a new wav eform or modify a n e xisting wav e f orm . 1. Select Undo to cancel the last process. Undo does not apply to cursor position, zoom, and scroll f unctions. 2. Select Redo to repeat the last process . 3. Opens the Standard W a ...

  • Tektronix AWG5000 Series - page 54

    Using the Edit Menu 42 A WG5000 Ser ies Quic k Star t User Manual Creating a Standar d W a vef orm Y ou can create a new w a v ef orm using the standard w avef orm dialog bo x. 1. Select Edit > Standar d W aveform.. . to open the Standard W av eform dialog bo x. 2. Use Function to select a wav eform type. Y ou can select a w avef or m from Sine, ...

  • Tektronix AWG5000 Series - page 55

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 43 6. Use Level to set par ameters f or Ampli- tude/Offset or High/Lo w . 7. Use Option to select the amplitude/ offset settings . This frame is displa yed when you set the v er tical units to Vo l t a g e . If you set t he v er tical units to Normal- ized V alue, this fra me is disable ...

  • Tektronix AWG5000 Series - page 56

    Using the Edit Menu 44 A WG5000 Ser ies Quic k Star t User Manual Using Cut, Copy , P aste and Delete (W avef orm Window) Y ou can cut or cop y specified area to the instrument’ s internal clipboard. Cut or copied dat a can be pasted to a specified position in either Gr aphic or T able mode . When e xecuti ng th ese operations , items and ra nge ...

  • Tektronix AWG5000 Series - page 57

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 45 Quick Tips ■ Delete is the same a s Cut e xcept that Delete does not cha nge the contents o f the internal clipboard. ■ If all items are cut or deleted, the w avef or m length wi ll be shor tened accordin gly . 2. Specify the range using cursors. 3. Select Edit > Cut ... to op ...

  • Tektronix AWG5000 Series - page 58

    Using the Edit Menu 46 A WG5000 Ser ies Quic k Star t User Manual Defining a Sequence It is sometimes necessary to create long wav eform files to fully implement a DUT test. Where por tions of the wa v ef orms are repeated, a w av eform sequencing function can sa v e you a lot of me mor y-intensiv e wav eform programming. Sequencer is us ed f or ma ...

  • Tektronix AWG5000 Series - page 59

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 47 ■ The f ollowing signals are su ppor ted as an e vent: ■ A signal applied to the front-panel Ev ent Input connector ■ When the front-pan el F orce Ev ent b utton is being p ushed ■ Remote command NO TE. There are two sequencer modes in t he arbitrary wa v ef orm generator to ...

  • Tektronix AWG5000 Series - page 60

    Using the Edit Menu 48 A WG5000 Ser ies Quic k Star t User Manual Editing a Sequence The f ollowing comma nds are provided f or sequence edit: Clear . Clear removes the contents of selected element(s). Unselected elemen ts do not shift. Y ou can cle ar multiple non-contiguous el ements. Copy , P aste -Insert and P aste-Replace . Y ou can cop y or p ...

  • Tektronix AWG5000 Series - page 61

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 49 Using Set W avef orm and Inser t W avef orm Y ou can inser t or replace a wa vef or m in the Sequence window . ■ Set W aveform – Use to assign or replace the selected w av eform at the specified position in the Se quence windo w . ■ Insert Wa veform – Use to insert the select ...

  • Tektronix AWG5000 Series - page 62

    Using the Edit Menu 50 A WG5000 Ser ies Quic k Star t User Manual Using P aste-Inser t and P aste-Replace Y ou can insert or replace wa v ef orm data in the clipboard in the W a v ef orm window or Sequence windo w . The follo wing e xample sho ws a P aste-Inser t operation in the W av ef o rm window . Quick Tips ■ Ex ecuting P aste-Inser t will s ...

  • Tektronix AWG5000 Series - page 63

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 51 Using Rename Y ou can change the wa vef or m name in the W av eform List windo w . Using Other Edit Menu Commands Scale. Y ou can scale the specified range of analog d ata using Scale from the Edit menu. 1. S e l e c t a wa ve fo r m i n t h e Wa ve fo r m L i s t window , and then s ...

  • Tektronix AWG5000 Series - page 64

    Using the Edit Menu 52 A WG5000 Ser ies Quic k Star t User Manual Offset. Y ou can add con stants to the sp ecified range of analog data using Offset from the Edit menu. In ver t. Data v alues in the specif ied range can be in ve r ted using In vert from the Edit men u. 1. Offset can be set b y v oltage or nor mal- ized v alue. 2. F or item and ran ...

  • Tektronix AWG5000 Series - page 65

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 53 Horizontal Shift/Rotate. Y ou can shift or rotate the specified range of w av eform data horizontally using Shift/Rotate from the Edit menu. Quick Tips ■ Horizontal Rotate is used to chec k if the wa v ef orm data is connected smoothly f rom the end of the first wa vef or m to the ...

  • Tektronix AWG5000 Series - page 66

    Using the Edit Menu 54 A WG5000 Ser ies Quic k Star t User Manual PRBS. Y ou can replace a specif ied range of wa vef or m data with a PRBS pa ttern. Set P attern. Y ou can fill the specified area of marker data with a selected digital pattern. 1. Select a PRBS pattern. 2. Select a Mark Density . 3. Inv er t can be set to On or Off . 4. F or item a ...

  • Tektronix AWG5000 Series - page 67

    Using the Edit Menu A WG5000 Ser ies Quic k Star t User Manual 55 Clock P attern. Y ou can fill a specified area of mark er data with the 1010 cloc k pattern. Binary Counter . Y ou can fill the specified area of ma rker data with binar y counter patter n. 1. Use this dialog bo x to change the Item or Range. 1. Y ou can select the direction (Up coun ...

  • Tektronix AWG5000 Series - page 68

    Using the Edit Menu 56 A WG5000 Ser ies Quic k Star t User Manual W aveform Pr oper ties. Y ou can confirm or change prope r ties of wa vef or m data using the W av ef orm Proper ties dialog bo x. 1. S e l e c t a wa ve fo r m i n t h e Wa ve fo r m L i s t window , and then select Edit > Wav e - form Pr oper ties... from the men u bar to displa ...

  • Tektronix AWG5000 Series - page 69

    Using the View Menu A WG5000 Ser ies Quic k Star t User Manual 57 Using the Vie w Men u Use the View men u to control the arb itrary wav eform generator scree n displa y . The choices are as f ollows: 1. Opens the Go T o ... dialog bo x. 2. Y ou can select one of these z oom func- tions. See p age 61. 3. Check to displa y these control windows and ...

  • Tektronix AWG5000 Series - page 70

    Using the View Men u 58 A WG5000 Ser ies Quic k Star t User Manual Using Go T o Dialog Bo x This dialog bo x is used to mo ve to a specified p osit ion in th e sequence, or to specify an in de x number to go to . Quick Tip ■ Y ou can also us e the Go T o dialog bo x in the W a ve f orm List window . 1. Select View > Go T o... in the Sequence w ...

  • Tektronix AWG5000 Series - page 71

    Using the View Menu A WG5000 Ser ies Quic k Star t User Manual 59 Using Displa y Pr oper ties Dialog Bo x Y ou can configu re the appear ance of w a vef or m edit a nd sequence edit win dows of your arbitrary wa v ef orm generator. 1. Select Vie w > Displa y Properties... to displa y the Display Properties dialog bo x. Click the W av eform Windo ...

  • Tektronix AWG5000 Series - page 72

    Using the View Men u 60 A WG5000 Ser ies Quic k Star t User Manual 9. Click the Seque nce Window tab . 10. Select Graphic or Ta b l e f or the Sequence windo w displa y f or mat. The displa y f ormat is common to all chan- nels. 11. If Graphic is specified, y ou can select the displa y f ormat ( Thumbnail or Wav e fo r m N a m e ). 11 10 9 ...

  • Tektronix AWG5000 Series - page 73

    Using the View Menu A WG5000 Ser ies Quic k Star t User Manual 61 Using Zoom Use the Zoom function to magnify or reduce a wa v ef orm display . The choices are as f ollows: 1. Zoom In Use Zoom In to magnify a w av eform horizontally and v er tically at the same time. 2. Horizontal Zoom In Use Horizontal Zoom In to magnify a wa v ef or m horizontall ...

  • Tektronix AWG5000 Series - page 74

    Using the Settings Menu 62 A WG5000 Ser ies Quic k Star t User Manual Using the Settings Menu Use the Settings me nu to control th e displa y items on the Settings windo w . Quick Tips ■ The W av ef orm Rotation can be set independen tly f or each channel. ■ Analog Phase – Can be set b y degre e ( ° ). ■ Analog Dela y – Can be set b y ti ...

  • Tektronix AWG5000 Series - page 75

    Using the Settings Menu A WG5000 Ser ies Quic k Star t User Manual 63 Channel Coupling Y ou can change t he paramet er v alues f or multiple channe ls a t a time. This function is called Channel Co upling. Quick Tips ■ Ch 1 –>Ch 2, Ch 3, Ch 4 means that Ch 1 parameters are coupled wi th Ch 2, Ch 3 and Ch 4 parameters . With the Channel Coupl ...

  • Tektronix AWG5000 Series - page 76

    Using the T ools Menu 64 A WG5000 Ser ies Quic k Star t User Manual Using the T ools Menu Use the T ools menu to perf or m the math o perations or select normalize option settings. Math W avef orms Y ou can use the Math dialog bo x to perf or m mathematical oper at ions on the w av eform you are editing. The analog data of two w av eforms can be ad ...

  • Tektronix AWG5000 Series - page 77

    Using the T ools Menu A WG5000 Ser ies Quic k Star t User Manual 65 Normalize Option Y ou can se lect nor malize options when analog d ata is nor malized. Nor malize is e xecuted f or the entire analog wa v ef orm data. Select one of the f ollowing options from the To o l s m e n u : 1. Fit to D A C Rang e, Preserve Offset The wa vef or m data is s ...

  • Tektronix AWG5000 Series - page 78

    Using the System Menu 66 A WG5000 Ser ies Quic k Star t User Manual Using the System Menu The System menu pro vides access to the instrument system configurat ion such as signal gener at ion control, instrument calibration, a nd instrument diagnostics . Y ou can also set the us er pref erences such as powe r-on settings or LCD brightness using the ...

  • Tektronix AWG5000 Series - page 79

    Using the System Menu A WG5000 Ser ies Quic k Star t User Manual 67 Using For ce J ump T o Dialog Bo x F orce Jump allows y ou to jump to a position that y ou choose . This fu nction is used in sequence mo de. Quick Tips ■ The arbitrary wa v ef orm generator has an Ev ent J ump function which changes the sequence using an e vent sign al. Use the ...

  • Tektronix AWG5000 Series - page 80

    Using the System Menu 68 A WG5000 Ser ies Quic k Star t User Manual Setting GPIB/LAN Quick Tip ■ The f ollowing operations ca nnot be perf or med through a GPIB o r LAN connecti on: ■ Editing a wa v ef or m ■ Changing size or na me of wa vef or m ■ Conv er ting the wa vef or m f ormat ■ Impor ting wav ef or m data from the A WG5000 ser ie ...

  • Tektronix AWG5000 Series - page 81

    Using the System Menu A WG5000 Ser ies Quic k Star t User Manual 69 Setting the User Preferences Select System > Pref erences... to open the Pref erences dialog bo x. 1. Star tup – Select a po wer-on setting. See page 32. 2. LCD Brightness – Set the LCD brigt- ness. 3. Remote Command Log – Y ou can record the sequence of GPIB commands y ou ...

  • Tektronix AWG5000 Series - page 82

    Using the System Menu 70 A WG5000 Ser ies Quic k Star t User Manual Option Installation Use the Option In stallation dialog bo x to enable the u pgrad es that y ou purchased fro m T ektronix for y our instrument. For the most current list of upg rades , go to www .tektronix.com or contact y our local T ektronix representativ e. 1. Select System > ...

  • Tektronix AWG5000 Series - page 83

    Tu t o r i a l s A WG5000 Ser ies Quic k Star t User Manual 71 Tu t o r i a l s The e xamples in this section sho w how to u se your instrument to do common arbitr ary wav eform generator tasks . These e xamples use the dual-channel mod el. Creating and Editing a Standar d W a vef orm 1. Recall the def ault setup. 2. Select Continuous from the Run ...

  • Tektronix AWG5000 Series - page 84

    Tu t o r i a l s 72 A WG5000 Ser ies Quic k Star t User Manual 7. Set the wa vef orm created in step 6 to Ch 2. 8. Assign the w av eform name “Ch2-Sine” to the wa vef orm. 9. T o edit analog wa vef or m data, hide the Ch 1 and Ch 2 Mark er data using the Displa y Proper ties dialog bo x. 10. Delete points from the en d of the Ch 2 wa v ef or m ...

  • Tektronix AWG5000 Series - page 85

    Tu t o r i a l s A WG5000 Ser ies Quic k Star t User Manual 73 Editing a Sequence 1. Recall the def ault setup. 2. Select Sequence from the Run Mode page of the Settings wind ow . 3. Select *Sine960 from the Predefined page of the W avef or m List window , and set the wa vef or m to the first cell of Ch 1 sequence . Ref er to page 24 to learn how t ...

  • Tektronix AWG5000 Series - page 86

    Tu t o r i a l s 74 A WG5000 Ser ies Quic k Star t User Manual 7. Set Wa i t T r i g g e r to the inde x number 1 using the Sequence Control P arame- ters dialog bo x. This makes the sequence w ait a trigger before ge ner- ating the first element. 8. Set Repeat Count to 5 at the inde x number 2. This mak es the sequence repeat the second element fi ...

  • Tektronix AWG5000 Series - page 87

    A WG5000 Ser ies Quic k Star t User Manual 75 Inde x Numerics 10 MHz Ref erence Output connector Rear panel 12 A Accessing control windows 20 Accessing menus 20 Accessories 1 Add Input Settings window 26 Add Input connector Rear panel 12 All Outputs On/Off b utton F ront panel 14 , 17 Status bar 22 Amplitude button F ront panel 14 Analog Dela y W a ...

  • Tektronix AWG5000 Series - page 88

    Inde x 76 A WG5000 Ser ies Quic k Star t User Manual I Icons Sequence window 24 Impor t wa v ef orm data 36 Incoming insp ection 7 Insert Wa vef or m Edit menu 49 Inv er t Edit menu 52 Item, Edit menu 44 L LAN connector F ront panel 12 Last Used File Star tup setting 32 LCD Brightness Pref erences dialog bo x 69 Loc k/unlock F ront panel controls 1 ...

  • Tektronix AWG5000 Series - page 89

    Inde x A WG5000 Ser ies Quic k Star t User Manual 77 System menu Overview 66 T T ext file impor t 39 Timing page Settings window 28 T ools menu 64 T ooltip 24 T ouch screen 15 Adjustment 15 T ouch Screen Off button F ront panel 13 T r igger Input connecto r F ront panel 11 T r igger page Settings window 30 T r iggered Run mode 29 Tu t o r i a l s S ...

  • Tektronix AWG5000 Series - page 90

    Inde x 78 A WG5000 Ser ies Quic k Star t User Manual ...

Manufacturer Tektronix Category Welding System

Documents that we receive from a manufacturer of a Tektronix AWG5000 Series can be divided into several groups. They are, among others:
- Tektronix technical drawings
- AWG5000 Series manuals
- Tektronix product data sheets
- information booklets
- or energy labels Tektronix AWG5000 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tektronix AWG5000 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tektronix AWG5000 Series, service manual, brief instructions and user manuals Tektronix AWG5000 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tektronix AWG5000 Series.

Similar manuals

A complete manual for the device Tektronix AWG5000 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tektronix AWG5000 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tektronix AWG5000 Series.

A complete Tektronix manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tektronix AWG5000 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tektronix AWG5000 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tektronix AWG5000 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Tektronix AWG5000 Series - which should help us in our first steps of using Tektronix AWG5000 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tektronix AWG5000 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tektronix AWG5000 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tektronix AWG5000 Series?

Use the form below

If you did not solve your problem by using a manual Tektronix AWG5000 Series, ask a question using the form below. If a user had a similar problem with Tektronix AWG5000 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)