English dropdown-ico

Manual Hitachi DH 38MS

12 pages 0.51 mb
Download

Go to site of 12

Summary
  • Hitachi DH 38MS - page 1

    Rotary Hammer Model DH 38MS Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool. 001Cover_DH38MS_Eng 11/25/08, 18:25 1 ...

  • Hitachi DH 38MS - page 2

    2 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or ...

  • Hitachi DH 38MS - page 3

    3 2. Anchor hole drilling (Rotation + Hammering) Drill bit (Taper shank) STANDARD ACCESSORIES (1) Case ............................................................................. 1 (2) Side Handle ................................................................ 1 Standard accessories are subject to change without notice. OPTIONAL ACCESSORIES (sol ...

  • Hitachi DH 38MS - page 4

    4 (1) Center pin 䢇 Applied to core bits from 38 mm to 105 mm 䢇 Applied to core bits 32 mm and 35 mm NOTE: Do not use core bits 25 mm or 29 mm. (2) Core bit 䢇 External dia. 25, 29, 32, 35, 38, 45, 54, 64, 79, 94, 105 mm (with guide plate, not applicable to cores 25 mm or 29 mm) (3) Core bit shank 䢇 Applied to core bits above 38 mm 䢇 Applie ...

  • Hitachi DH 38MS - page 5

    5 Fig. 1 (2) To attach the tool (SDS max shank), insert it into the hole until it contacts the innermost end of the hole as illustrated in Fig. 2 . If you continue to turn the tool with slight pressure, you can feel a spot where there is a hitch. At that spot, pull the grip to the direction of an arrow mark and insert the tool all the way until it ...

  • Hitachi DH 38MS - page 6

    6 4. When demolishing and chiseling at “hammering”: CAUTION: 䡬 If the selector lever is switched during motor rotation, the tool can start to rotate abruptly, resulting in unexpected accidents. Make sure to switch the selector lever when the motor is at a complete stop. 䡬 If the bull point or cold chisel is used at the position of ”rotati ...

  • Hitachi DH 38MS - page 7

    7 Fig. 10 (2) Turn the power on and drill a base hole to the depth sounded by indicating groove on the drill bit. (3) After cleaning out dust with a syringe, attach the plug to the anchor tip and drive in the anchor with a manual hammer. (4) To remove the drill bit (taper shank), insert the cotter into the slot of the taper shank adapter and strike ...

  • Hitachi DH 38MS - page 8

    8 Fig. 14 (3) Insert the center pin into the guide plate until it reaches the extremity. (4) Fit in the guide plate by aligning its concaved portion with the core bit tip. When the position of the concave is shifted by turning the guide plate right or left, the guide plate never slips off even when the drill is used in a downward direction. ( Fig. ...

  • Hitachi DH 38MS - page 9

    9 2. Grease replenishment CAUTION: Before replenishing the grease, turn the power off and pull out the power plug. (1) Remove the crank cover and wipe off the grease inside. ( Fig. 19 ) (2) Supply 60 g of Hitachi Electric Hammer Grease A (Standard accessory, contained in tube) to the crank case. (3) After replenishing the grease, install the crank ...

  • Hitachi DH 38MS - page 10

    10 02Back_DH38MS_Eng 11/25/08, 18:25 10 ...

  • Hitachi DH 38MS - page 11

    11 ITEM NO. PA RT NAME Q’TY 1 FRONT CAP 1 2 GRIP 1 3 STOPPER RING 1 4 NEEDLE HOLDER 1 5 RET AINER SPRING 1 6 SPRING HOLDER (A) 1 7 CYLINDER CASE 1 8 HEX. SOCKET HD. BOL T (W/FLANGE) M6 × 25 4 9 O-RING (1AS-60) 1 10 RET AINER DAMPER 1 11 RET AINER DAMPER W ASHER 1 12 RET AINER SLEEVE 1 13 NEEDLE ROLLER D8 × 20 2 14 O-RING (C) 1 15 SECOND HAMMER ...

  • Hitachi DH 38MS - page 12

    101 Code No. C99177512 F Printed in China Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan 02Back_DH38MS_Eng 12/3/10, 2:58 PM 12 ...

Manufacturer Hitachi Category Power Hammer

Documents that we receive from a manufacturer of a Hitachi DH 38MS can be divided into several groups. They are, among others:
- Hitachi technical drawings
- DH 38MS manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi DH 38MS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi DH 38MS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi DH 38MS, service manual, brief instructions and user manuals Hitachi DH 38MS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi DH 38MS.

Similar manuals

A complete manual for the device Hitachi DH 38MS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi DH 38MS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi DH 38MS.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi DH 38MS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi DH 38MS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi DH 38MS, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi DH 38MS - which should help us in our first steps of using Hitachi DH 38MS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi DH 38MS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi DH 38MS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi DH 38MS?

Use the form below

If you did not solve your problem by using a manual Hitachi DH 38MS, ask a question using the form below. If a user had a similar problem with Hitachi DH 38MS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)