English dropdown-ico

Manual Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15

76 pages 3.46 mb
Download

Go to site of 76

Summary
  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 1

    © 2008 Alamo Group Inc. ALAMO INDUSTRIAL 1502 E. W alnut Seguin, T exas 78155 210-372-3551 ® ® P ART'S MANUAL An Operator's Manual was shipped with the equipment in the Manual Canister . This Operator's Manual is an integral part of the safe operation of this machine and must be maint ained with the unit at all times. READ, UNDERS ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 2

    TO THE OWNER/OPERA T OR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the c ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 3

    P ARTS SECTION Parts Section – 1 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 4

    Parts Section – 2 ©2008 Alamo Group Inc. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: The following instructions are o ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 5

    PART NAME INDEX AXLE ASSEMBLY ....................................................................................................................................................................................... 5 AXLE ATTACHMENT ...................................................................................................................... ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 6

    PART NAME INDEX WALKING AXLE ASSEMBLY - OPTION ............................................................................................................................................... 60 WEIGHT BOX ASSEMBLY - FALCON 10 ............................................................................................................................ ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 7

    AXLE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 00777831 1 WLDMT LH WING AXLE 2 00777830 1 WLDMT RH WING AXLE 3 00778962 1 WLDMT STANDARD AXLE 4 00009500 4 BOLT-HEX 3/4 NC 4-1/2 PL5 5 00751584 4 SPACER TUBE 6 00037200 4 NUT TOPLOCK 3/4 NC PLC 7 00605600 6 HHCS 1/2 NC 3-1/4 PL 8 00001800 6 LOCKNUT TLM 1/2 NV PLB 9 00763449 2 ASSEMBLY CONTROL ROD ©20 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 8

    AXLE ATTACHMENT ITEM PART NO. QTY. DESCRIPTION 1 00752278 2 HEXB 1 NC 7 PL5 2 02030300 6 NUT TOPLOCK 1 NC PLB 3 00750479 2 HEXB 1 NC 4-3/4 PL5 4 00016700 2 BOLT 1 NC 8 GR8 ©2008 Alamo Group Inc. Parts Section -6 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 9

    AXLE TURNBUCKLE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 00763449 1 ASSY-CONTROL-ROD 1 00763450A 1 TURNBUCKLE,1-1/8NC THRD 2 HOLE 2 00763962 1 WLDMT-TOP LINK 3 00763447 1 TOP LINK,THREADED 4 02012200 1 NUT HEX 1-1/8 NC PL 5 02152800 2 HEXB 5/16 NC 2-1/2PL 6 00780848 1 GREASE FITTING 7 00750940 2 NUT TOPLOCK 5/16 NC PLB ©2008 Alamo Group Inc. Parts ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 10

    BLADE CARRIER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 0622010330 2 BLADE, CCW FAN (RIGHT WING) 0652010330 4 BLADE CW - (LEFT WING & CENTER) (SHOWN) 00762435 2 BLADE FAN CCW 5/8 HEAVY DUTY (RIGHT WING) 00762438 4 BLADE FAN CW 5/8 HEAVY DUTY (LEFT WING & CENTER) 0652010003 6 BLADE, FLAT ( RIGHT WING, LEFT WING, AND CENTER) 00757830 2 BLADE, ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 11

    BLADE CARRIER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 11 00749136 4 NUT TOPLOCK 5/8 NF PLB 12 00756077 4 WASHER,5/8 HARDENED 13 00779373 1 WLDMT, WING BLADE BAR 14 00771304 1 SUPPORT, SEAL PROTECTOR SHIP 15 00779372 1 CENTER BLADE PAN 16 00779371 - WING BLADE PAN ©2008 Alamo Group Inc. Parts Section -9 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 12

    CHAINGUARD ASSEMBLY - FRONT CENTER ITEM PART NO. QTY. DESCRIPTION 1 00778190 1 DOUBLE CHAINGUARD, ASY, CTR LH 2 00778192 1 DOUBLE CHAINGUARD, ASY, CTR FRT 3 00778191 1 DOUBLE CHAINGUARD, ASY, CTR FRT RH 4 4526 7 FLANGE LOCKNUT 1/2 NC 5 02030700 7 HHCS 1/2-13UNC 1-1/4 PL5 ©2008 Alamo Group Inc. Parts Section -10 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 13

    CHAINGUARD ASSEMBLY - FRONT WING ITEM PART NO. QTY. DESCRIPTION 1 00778141 1 DOUBLE CHAINGUARD ASSY, FRONT WING 2 00002700 4 FLATWASHER 1/2 PL STD 3 02030700 4 HHCS 1/2-13UNC 1-1/4 PL5 ©2008 Alamo Group Inc. Parts Section -11 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 14

    CHAINGUARD ASSEMBLY - REAR CENTER ITEM PART NO. QTY. DESCRIPTION 1 00757447 1 DOUBLE CHAINGUARD ASSY, REAR CTR 2 02030700 6 HHCS 1/2-13UNC 1-1/4 PL5 3 00002700 6 FLATWASHER 1/2 PL STD 4 4526 6 NUT LOCK FLG WHIZ 1/2-13 NC PL ©2008 Alamo Group Inc. Parts Section -12 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 15

    CHAINGUARD ASSEMBLY - REAR WING ITEM PART NO. QTY. DESCRIPTION 1 00761275 1 DOUBLE CHAINGUARD ASSY, REAR WING 2 00763213 1 DOUBLE CHAINGUARD ASSY, REAR INSIDE WING 3 00748823 3 HHCS 1/2-13UNC 1-1/2 PL5 4 00753013 3 HHCS 1/2 NC 3 PL8 5 4526 6 NUT LOCK FLG WHIZ 1/2-13 NC PL 6 00002700 3 FLATWASHER 1/2 PL STD 7 00761027 3 PIPE SPACER ©2008 Alamo Grou ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 16

    COMPLETE ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 1 00779322 1 WDMT, CENTER SECTION - FALCON 15 02986648 1 WDMT, CENTER SECTION - FALCON 10 2 00777798 1 WLDMT, LEFT WING - FALCON 15 3 00777799 1 WLDMT, RIGHT WING - FALCON 15 ©2008 Alamo Group Inc. Parts Section -14 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 17

    CYLINDER ASSEMBLY - CENTER ITEM PART NO. QTY. DESCRIPTION 00759946A 1 CYLINDER ASSEMBLY 1 2417158 1 CLEVIS CAP 2 2417157 1 ROD CAP 3 00774732 1 PISTON 4 00774737 1 ROD 5 00774748 1 TUBE 6 00774742 4 TIE ROD 9 * 2 END CAP O-RING 10 * 1 ROD WIPER SEAL 11 * 1 ROD DUSTSEAL 12 * 1 PISTON SEAL 13 * 1 PISTON WEAR RING 14 * 2 END CAPBACKUPWASHERS 15 304711 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 18

    CYLINDER ASSEMBLY - WING ITEM PART NO. QTY. DESCRIPTION 00759947A 1 CYLINDER ASSEMBLY 1 2417158 1 CLEVIS CAP 2 2417157 1 ROD CAP 3 00774732 1 PISTON 4 00774738 1 ROD 5 00774749 1 TUBE 6 00774743 4 TIE ROD 9 * 2 END CAP O-RING 10 * 1 ROD WIPER SEAL 11 * 1 ROD DUSTSEAL 12 * 1 PISTON SEAL 13 * 1 PISTON WEAR RING 14 * 2 END CAPBACKUPWASHERS 15 3047117 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 19

    CYLINDER ATTACHMENT - CENTER ITEM PART NO. QTY. DESCRIPTION 1 00778942 1 ASY, SPRING POD 2 00606000 1 PIN-COTTER 3/16 X 2 3 103266 1 CYLINDER PIN 4 00755234 1 CONTROL SPACER KIT 5 00777963 1 PLATE, TRANSPORT LOCK 6 00778939 1 SPRING SUPPORT WELDMENT 7 00778940 2 WLDMT, PIVOT ARM 8 371063A 2 SPRING 9 00778933 1 WLDMT, BASE SPRING POD 10 0656460240 2 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 20

    CYLINDER ATTACHMENT - WING ITEM PART NO. QTY. DESCRIPTION 1 00775174 1 FLAT TRANSPORT BAR 2 8352 2 PIN ASSEMBLY 3 00761504 1 SPACER 1-1/2 OD X 1ID X1LG 4 00606000 4 PIN-COTTER 3/16 X 2 5 02985161 1 WLDMT FLOATING LINK 6 02985146 1 WLDMT SWITCH MOUNT BAR 7 02712500 1 HHCS 1 NC 4 PL8 8 02030300 1 NUT TOPLOCK 1 NC PLB 9 02985147 1 SWITCH PROXIMITY 12V ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 21

    FILTER ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 02964748 1 FILTER ASY 1 02961001 1 FILTER ELEMENT REPLACEMENT ONLY 2 02972678 1 SPRING, FILTER CARTRIDGE 3 02973782 1 VALVE, FILTER BYPASS 4 02978349 1 FILTER COVER 5 02978355 1 NUT AND BOLT KIT F/ TOP COVER 02978354 1 SEAL KIT ©2008 Alamo Group Inc. Parts Section -19 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 22

    HITCH OPTION - CAPTIVE BALL COUPLER ITEM PART NO. QTY. DESCRIPTION 00769178 1 ASY,CAPTIVE BALL HITCH 1 00759331 1 COUPLER CLEVIS WELDMENT 2 00758938 1 BALL, HITCH 2-5/16 BALL 1-1/4 3 02960916 1 HHCS 3/4 NC 5 PL8 4 00037200 1 NUT TOPLOCK 3/4 NC PLC 5 15B1200 2 WASHER 3/4 P SAE 6 00769398 1 ASY,CHAIN & PIN 7 00752670 1 FITTING,GREASE STRAIGHT 1/4 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 23

    HITCH OPTION - PINTLE HOOK ITEM PART NO. QTY. DESCRIPTION 00773869 1 ASY PINTLE HOOK OPTION 1 00773872 1 WLDMT PINTLE HOOK CLEVIS 2 00752283 1 WLDMT, PINTLE HOOK MOUNTING 3 00752279 1 PINTLE HOOK 4 02891800 4 HHCS 1/2 NC 1-3/4 PL8 5 00001800 4 LOCKNUT TLM 1/2 NC PLB 6 02712500 1 HHCS 1 NC 4 PL8 SPECIAL 7 02030300 1 NUT TOPLOCK 1 NC PLB 8 02845600 1 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 24

    HYDRAULIC CONTROL VALVE - CLOSED CENTER ITEM PART NO. QTY. DESCRIPTION 00759833 1 CLOSED CENTER VALVE 1 00751139 3 DETENT REPAIR KIT 2 00751142 3 HANDLE ASSEMBLY 3 00751002 1 CLOSED CENTER PLUG 4 00751556 1 SPOOL SEAL KIT FOR ITEM #1 OR #2 (NOT SHOWN) 5 00752057 1 NON-RELIEF VALVE PLUG (CLOSED CENTER) ©2008 Alamo Group Inc. Parts Section -22 FALCO ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 25

    HYDRAULIC CONTROL VALVE - OPEN CENTER ITEM PART NO. QTY. DESCRIPTION 00380200 1 OPEN CENTER VALVE 1 00751139 2 DETENT REPAIR KIT 2 00751140 1 HIGH PRESSURE RELIEF VALVE KIT 3 00751142 3 HANDLE ASSEMBLY 4 00751141 1 PLUG (OPEN CENTER) 5 00751358 1 REPAIR KIT-SPRING RETURN TO CENTER 6 00751556 1 SPOOL SEAL KIT FOR ITEM #1 OR #2 (NOT SHOWN) ©2008 Ala ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 26

    HYDRAULIC CONTROL VALVE WITH MOUNTING KIT ©2008 Alamo Group Inc. Parts Section -24 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 27

    HYDRAULIC CONTROL VALVE WITH MOUNTING KIT Continued... ITEM PART NO. QTY. DESCRIPTION 1 --------- 2 WING LIFT CYLINDER 2 --------- 1 AXLE LIFT CYLINDER 3 --------- 3 HYDRAULIC HOSE 4 00774574 2 RESTRICTOR ELBOW 90 DEG. 5 000999 2 ADP. PIPE ELBOW 45 DEG. 6 --------- 3 BREATHER 7 7323 2 BUSHING REDUCER 8 1347 2 HYDRAULIC HOSE 9 2107 3 QUICK DISCONNEC ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 28

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - CENTER ©2008 Alamo Group Inc. Parts Section -26 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 29

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - CENTER Continued... ITEM PART NO. QTY. DESCRIPTION 02985246 1 ASY MOTOR & SPINDLE - CENTER 1 02978485 1 CENTER MOTOR 2 00016200 4 HHCS 5/16 NC 2 PL5 3 00011700 4 LOCKWASHER 5/16 PL STD 4 02978488 1 CENTER MOTOR MANIFOLD ASSEMBLY 5 02984764 1 ASSEMBLY SPINDLE 6 00750317 2 SPLIT FLANGE KIT, #16 7 02892000 4 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 30

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - LEFT WING ©2008 Alamo Group Inc. Parts Section -28 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 31

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - LEFT WING Continued... ITEM PART NO. QTY. DESCRIPTION 02985255 1 ASY MOTOR & SPINDLE-RIGHT WING 1 02984764 1 SPINDLE ASSEMBLY 2 02978487 1 MOTOR, LH WING 3 02985842 1 WING MOTOR MANIFOLD ASSEMLBY 4 00750317 2 SPLIT FLANGE KIT, #16 5 02962181 1 ADP HYD STGHT 4MB-4MJ 6 02733700 4 BOLT, HEX HEAD 5/16"-NC ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 32

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - RIGHT WING ©2008 Alamo Group Inc. Parts Section -30 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 33

    HYDRAULIC MOTOR AND SPINDLE ASSEMBLY - RIGHT WING Continued... ITEM PART NO. QTY. DESCRIPTION 02985254 1 ASY MOTOR & SPINDLE-RIGHT WING 1 02984764 1 SPINDLE ASSEMBLY 2 02978486 1 MOTOR, RH WING 3 02985842 1 WING MOTOR MANIFOLD ASSEMLBY 4 00750317 2 SPLIT FLANGE KIT, #16 5 02962181 1 ADP HYD STGHT 4MB-4MJ 6 02733700 4 BOLT, HEX HEAD 5/16"-N ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 34

    HYDRAULIC PUMP AND HOSE ASSEMBLY - TANDEM ITEM PART NO. QTY. DESCRIPTION 1 02978484 1 HYD PUMP ASY (PUMP ONLY) 2 00750317 2 SPLIT FLG KIT, 1" W/FLNG 1/2’S,BOLTS,O-RING & WASHERS 02778400 2 O-RING, REPLACEMENT (1.296" ID X .139 THK - AS-219) 3 02979876 1 HOSEASY, #16 - 16FJX - 16FL90 - 63" LG 4 02979407 1 HOSE ASY, #16 - 16FL90 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 35

    HYDRAULIC MOTOR REPLACEMENT PARTS - CENTER ITEM PART NO. QTY. DESCRIPTION 02978485 1 MOTOR, CTR MOTOR 1 02979968 1 SET, GEAR SHAFT, CTR MOTOR 2 02979958 1 LIP SEAL, CTR MOTOR 3 02979959 2 RETAINER SEAL, CTR MOTOR 4 02979960 2 SNAP RING, CTR MOTOR 5 02979961 2 SEAL BACKUP, CTR MOTOR 6 02979962 2 THRUST PLATE, CTR MOTOR 7 02979963 8 SEAL, END - CTR M ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 36

    HYDRAULIC MOTOR REPLACEMENT PARTS - LEFT WING ITEM PART NO. QTY. DESCRIPTION 02978487 1 MOTOR, LH WING MOTOR 1 02979977 1 SET, GEAR SHAFT, LH WING MOTOR 2 02979969 1 LIP SEAL, LH WING MOTOR 3 02979970 2 RETAINER SEAL, LH WING MOTOR 4 02979971 2 SNAP RING, LH WING MOTOR 5 02979972 2 SEAL BACKUP, LH WING MOTOR 6 02979973 2 THRUST PLATE, LH WING MOTOR ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 37

    HYDRAULIC MOTOR REPLACEMENT PARTS - RIGHT WING ITEM PART NO. QTY. DESCRIPTION 02978486 1 MOTOR, RH WING MOTOR 1 02979977 1 SET, GEAR SHAFT, RH WING MOTOR 2 02979969 1 LIP SEAL, RH WING MOTOR 3 02979970 2 RETAINER SEAL, RH WING MOTOR 4 02979971 2 SNAP RING, RH WING MOTOR 5 02979972 2 SEAL BACKUP, RH WING MOTOR 6 02979973 2 THRUST PLATE, RH WING MOTO ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 38

    HYDRAULIC PUMP REPLACEMENT PARTS - TANDEM ITEM PART NO. QTY. DESCRIPTION 02978484 1 HYD PUMP ASY, TANDEM PUMP 1 02979956 1 GEAR SET, (LARGE GEAR SET) 2 02979957 1 GEAR SET, (SMALL GEAR SET) 3 02979944 1 LIP SEAL, INPUT SHAFT 4 02979945 2 THRUST PLATE, (F/ SMALL GEARS) 5 02979946 2 SEAL, SQ-R, (F/ SMALL GEARS) 6 02979947 2 SEAL CHANNEL, (F/ SMALL GE ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 39

    HYDRAULIC OIL COOLER AND FAN ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 02981377 1 HYD OIL COOLER & ELECTRIC FAN ASY 1 02981886 1 HEAT EXCHANGE CORE 2 02981887 1 HEAT EXCHANGE FAN ©2008 Alamo Group Inc. Parts Section -37 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 40

    HYDRAULIC SCHEMATIC ITEM PART NO. QTY. DESCRIPTION 1 00773043 2 HYDRAULIC HOSE 2 00759947A 2 HYDRAULIC CYLINDER 3 00759946A 1 HYDRAULIC CYLINDER 5 00774832 1 HYDRAULIC HOSE 7 94507 2 ADAPTER 8 00774574 2 ELBOW (W/ RESTRICTOR) 9 02968836 1 YELLOW TIE (LEFT WING HOSE) 10 02968830 1 BLUE TIE (CENTER AXLE HOSE) 11 02968832 1 GREEN TIE (RIGHT WING HOSE) ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 41

    THIS PAGE INTENTIONAL LEFT BLANK ©2008 Alamo Group Inc. Parts Section -39 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 42

    HYDRAULIC TANK ASSEMBLY ©2008 Alamo Group Inc. Parts Section -40 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 43

    HYDRAULIC TANK ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 1 02985042 1 WELDMENT HYDRAULIC TANK 2 02981377 1 COOLER, HYDRAULIC, W/FAN 3 02964748 2 FILTER ASSEMBLY, MODIFIED 4 02968880 1 GAUGE, TEMP LEVEL INDICATOR 5 02963662 2 GASKET, FILTER ASY, FIBER 6 00012101 12 LOCKWASHER, 3/8" PL 7 00011400 8 BOLT, HHCS 3/8 NC 1 PL5 8 00013901 4 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 44

    LEVEL ROD ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 00778165W 1 ASSY, LEVEL ROD COMPLETE 1 00778164 1 WELDMENT, LONG LEVEL ROD 2 651102 2 PIN-DRILLED 3 00778163 1 WELDMENT, SHORT LEVEL ROD 4 00778159 1 NUT, 9" 5 00755153 2 PIN-COTTER 3/16 X 1-1/2 PLATED 6 00778160 1 HEXNUT 7/8 JAM LH ZP 7 15B1200 4 WASHER 3/4 P SAE ©2008 Alamo Group Inc. Parts ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 45

    MOTOR ATTACHMENT ITEM PART NO. QTY. DESCRIPTION 1 00037200 6 LOCKNUT 3/4NC PLC 2 5312316 6 WASHER 3 02963646 6 HHCS 3/4NC 2-1/2 PL8 4 5710121 1 COVER PLATE, BLADE ACCESS HOLE 5 00023500 2 FLATWASHER, 5/16 TYPE AW ZP 6 5F5180 2 NUT 5/16 NC WING ©2008 Alamo Group Inc. Parts Section -43 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 46

    REVERSER FAN KIT (NEW MEXICO) ITEM PART NO. QTY. DESCRIPTION 1 02986772 1 REVERSER TIMED FAN CONTROL 2 02987287 1 FAN REVERSER MOUNT 3 00752735 4 SELF TAP 5/16 NC 3/4 PL ©2008 Alamo Group Inc. Parts Section -44 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 47

    THIS PAGE INTENTIONAL LEFT BLANK ©2008 Alamo Group Inc. Parts Section -45 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 48

    SIDE SKIRTS AND SKID SHOES ©2008 Alamo Group Inc. Parts Section -46 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 49

    SIDE SKIRTS AND SKID SHOES Continued... ITEM PART NO. QTY. DESCRIPTION 1 00777736 1 WLDMT, RH SIDE SKIRT 2 00777737 1 WLDMT, SIDE SKIRT LH (NOT SHOWN) 3 00001800 15 LOCKNUT TLM 1/2 NC PLB 4 00002700 17 FLATWASHER 1/2 PL STD 5 00748823 9 HHCS 1/2-13UNC 1-1/2 PL5 6 2A361612 3 PLW-BLT 3/8 X 1 1/2 7 00776618 2 BAR WING SKID SHOE 8 00763996 1 WLDMT-SKID ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 50

    SIDE SKIRTS AND SKID SHOES (NEW MEXICO) ©2008 Alamo Group Inc. Parts Section -48 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 51

    SIDE SKIRTS AND SKID SHOES (NEW MEXICO) Continued... ITEM PART NO. QTY. DESCRIPTION 1 02985960 1 WLDMT, RH DEEP SIDE SKIRT 2 02985962 1 WLDMT, LH DEEP SIDE SKIRT (NOT SHOWN) 3 00001800 15 LOCKNUT TLM 1/2 NC PLB 4 00002700 17 FLATWASHER 1/2 PL STD 5 00748823 9 HHCS 1/2-13UNC 1-1/2 PL5 6 2A361612 3 PLW-BLT 3/8 X 1 1/2 7 00776618 2 BAR WING SKID SHOE ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 52

    SMV SIGN MOUNTING ITEM PART NO. QTY. DESCRIPTION 1 03200347 1 EMBLEM, SMV 2 00785558 1 SMV BRACKET 3 10058000 2 HHCS 1/4 NC 1 PL5 4 00024100 4 FLATWASHER STD 1/4 PL 5 02959924 2 NUT TOPLOCK 1/4 NC PLB 6 00748823 1 HHCS 1/2-13UNC 1-1/2 PL5 7 00001800 1 LOCKNUT TLM 1/2 NC PLB ©2008 Alamo Group Inc. Parts Section -50 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 53

    THIS PAGE INTENTIONAL LEFT BLANK ©2008 Alamo Group Inc. Parts Section -51 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 54

    SPEED INCREASER ASSEMBLY ©2008 Alamo Group Inc. Parts Section -52 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 55

    SPEED INCREASER ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 00751488 1 SPEED INCREASER ASY, SPEED UP (540 RPM PTO) 1 00751536 1 SPLINE ADAPTER 2 00751531 1 GEAR, HIGH SPEED (18 TOOTH) 3 00752179 1 GEAR & SHAFT, LOW SPEED (72 TOOTH) 4 00751948 1 PUMP FLANGE, C-2 C-4 5 00751949 1 COVER, CLOSED 6 00751950 2 COVER, OPEN 7 00751970 8 PIPE P ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 56

    SPINDLE ASSEMBLY ©2008 Alamo Group Inc. Parts Section -54 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 57

    SPINDLE ASSEMBLY Continued... ITEM PART NO. QTY. DESCRIPTION 02984764 1 ASY SPINDLE HOUSING 1 02984765 1 MACH SPINDLE HOUSING 2 00769938 1 BEARING (TOP) 3 00778226 1 BEARING 60 X 110 X 38 #33212 4 02984771 1 MACH SPINDLE SHAFT 5 00777873 1 SEAL 70 X 110 X 12.7 #27791 6 00778621 1 OUTPUT SEAL PLATE 7 02962030 1 LOCKNUT, SPINDLE BEARING 8 02969728 2 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 58

    TIRE AND WHEEL OPTION ITEM PART NO. QTY. DESCRIPTION 1 00008700 1 WHEEL, 15 X 5.00 DC (RIM ONLY) 2 00025200 1 LAMINATED PUNCTURE-PROOF TIRE & WHEEL (21"" OD) 6.00 X 9 3 00771461 1 USED AIRPLANE TIRE AND WHEEL 4 00749698 1 IMPLEMENT TIRE AND WHEEL 5 00766911 1 FOAM FILLED USED AIRPLANE TIRE AND WHEEL ©2008 Alamo Group Inc. Parts Secti ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 59

    THIS PAGE INTENTIONAL LEFT BLANK ©2008 Alamo Group Inc. Parts Section -57 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 60

    TONGUE ASSEMBLY - LONG ITEM PART NO. QTY. DESCRIPTION 1 00779334 1 WLDMT, SHORT TONGUE 2 00768496 1 ASSY-LONG CONTROL ROD 3 00779350 1 JACK, PARKING 3000LB SIDEWIND 4 1431565 1 IID SHAFT TRANSPORT SUPPORT 5 40010000 1 PIN COTTER 1/8 X1 6 00764540A 1 WELDMENT CLEVIS 7 00755305 1 BOLT 1-8UNC-6 LG GRD 8 8 02030300 6 NUT TOPLOCK 1 NC PLB 9 00755224 1 B ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 61

    TONGUE ASSEMBLY - LONG Continued... ITEM PART NO. QTY. DESCRIPTION 10 00764536 1 WLDMT LONG CONTROL ROD 11 00764537 1 WLDMT CONTROL ROD THREADED 12 651102 1 PIN-DRILLED 13 00755153 1 PIN-COTTER 3/16 X 1-1/2 PLATED 14 15B1200 4 WASHER 3/4 P SAE 15 5C1490 1 HEXNUT 7/8 JAM ZP 16 00037200 1 NUT TOPLOCK 3/4 NC PLC 17 03200269 1 HHCS 3/4 NC 3 PL8 18 0076 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 62

    WALKING AXLE ASSEMBLY - OPTION ITEM PART NO. QTY. DESCRIPTION 1 00778396A 1 WALKING AXLE WLDMT-LEFT 2 00778397A 1 WALKING AXLE WLDMT-RIGHT 3 00779063 2 BUSHING 1 3/4 OD X 1-1/2 ID X 7 LG 4 00778920 2 SPINDLE SHAFT ASSEMBLY 5 00748823 4 HHCS 1/2-13UNC 1-1/2 PL5 6 00001300 4 LOCKWASHER 1/2 PL STD 7 00003500 8 ZERK FITTING 1/8 STRAIGHT ©2008 Alamo Gr ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 63

    WEIGHT BOX ASSEMBLY - FALCON 10 ITEM PART NO. QTY. DESCRIPTION 00780279 1 ASSY, WEIGHT BOX L.H. 1 00777999 1 WLDMT, WEIGHT BOX L.H. 2 7A14932 1 HHCS 7/8 NC 4 PL5 3 00761535 3 WASHER-7/8 STR PLAIN 4 00761503 1 SPACER 1-1/2 OD X1ID X 1/2LG 5 00012300 1 NUT, 7/8 NC HEX PL ©2008 Alamo Group Inc. Parts Section -61 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 64

    WHEEL HUB ASSEMBLY ITEM PART NO. QTY. DESCRIPTION 00776306 1 ASY, HUB AND SPINDLE 1 00778528 1 AXLE SPINDLE BOLT IN 2 00016900 1 BEARING CUP 3 02957149 1 BEARING CONE 14137A 4 371247D 1 BEARING CUP 332 5 13198 5 BOLT, HUB 6 00750614 5 NUT 1/2-20NF 90DEG.CONE LUG PL 7 371247J 1 NUT, 7/8-14 UNF STD SLOTTED 8 00778713 1 SEAL KIT 9 15B1400 1 WASHER 7/8 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 65

    WINCH AND STAND ASSEMBLY - OPTION ITEM PART NO. QTY. DESCRIPTION 00780570 1 WINCH & STAND KIT COMPLETE 1 00776958 1 WINCH STAND MOUNT WELDMENT 2 00750936 1 WINCH 3 00776957 1 MAIN STAND PLATE 4 00780569 1 WINCH STAND BRACE PLATE 5 02845500 1 BOLT 6 00695100 2 TOPLOCK 7 00749130 2 BOLT 8 00001800 2 LOCKNUT 9 00753655 1 CABLE ,PULLEY & BLOCK ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 66

    WIRING AND HOSE ROUTING DIAGRAM ©2008 Alamo Group Inc. Parts Section -64 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 67

    WIRING AND HOSE ROUTING DIAGRAM Continued... ITEM PART NO. QTY. DESCRIPTION 1H 02979878 1 #24-24FL90-BLANK-63LG 2H 02979877 1 #24-24FL90-BLANK-55LG 3H 02979407 1 #16-16FJX-16FL90-55LG 4H 02979407 1 #16-16FJX-16FL90-55LG 5H 02985420 1 #16-16FJX-16FL-124LG 6H 02985422 1 #16-16FL-16FL-131LG 7H 02985421 1 #16-16FJX-16FL-100LG 8H 02985423 1 #16-16FJX-16 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 68

    HOSE ROUTING NOTES ©2008 Alamo Group Inc. Parts Section -66 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 69

    FALCON HYDRAULIC SCHEMATIC ©2008 Alamo Group Inc. Parts Section -67 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 70

    WIRING HARNESS - 15 FT ©2008 Alamo Group Inc. Parts Section -68 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 71

    WIRING HARNESS - 15 FT Continued... ITEM PART NO. QTY. DESCRIPTION 02985227 1 WIRING HARNESS - 15 FT 1 02985403 2 FUSE MINI-BLADE 5 AMP 2 02985404 1 FUSE MINI-BLADE 25 AMP ©2008 Alamo Group Inc. Parts Section -69 FALCON 10 and 15 09-08 ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 72

    ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 73

    ALAMO INDUSTRIAL Limited W arranty ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 830-379-1480 1. LIMITED WARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purc ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 74

    T O THE OWNER/OPERA TOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) mak ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 75

    ...

  • Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - page 76

    Printed U.S.A Falcon 10 -15 Pub 11-07 P/N 02985378P ...

Manufacturer Alamo Category Welder

Documents that we receive from a manufacturer of a Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 can be divided into several groups. They are, among others:
- Alamo technical drawings
- Hydraulic Flex Wing Cutter Falcon 10 - 15 manuals
- Alamo product data sheets
- information booklets
- or energy labels Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15, service manual, brief instructions and user manuals Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15.

Similar manuals

A complete manual for the device Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15.

A complete Alamo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15, that we can find in the current document
3. Tips how to use the basic functions of the device Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 - which should help us in our first steps of using Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15?

Use the form below

If you did not solve your problem by using a manual Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15, ask a question using the form below. If a user had a similar problem with Alamo Hydraulic Flex Wing Cutter Falcon 10 - 15 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)