English dropdown-ico

Manual Pelco C2410M-1

16 pages 0.36 mb
Download

Go to site of 16

Summary
  • Pelco C2410M-1 - page 1

    INST ALLA TION 150 Series Camclosure ® Integrated Camera System C2410M-I (1/06) ...

  • Pelco C2410M-1 - page 2

    ...

  • Pelco C2410M-1 - page 3

    C2410M-I (1/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other ...

  • Pelco C2410M-1 - page 4

    4 C2410M-I (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC, Class A (black-white, EIA and CC ...

  • Pelco C2410M-1 - page 5

    C2410M-I (1/06) 5 Description The 150 Series Camclosure ® integrated camera system is an in-ceiling dome incorporating a camera and lens package into a small, discreet, high-security enclosure designed for areas subject to heavy vandalism. The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for mu ...

  • Pelco C2410M-1 - page 6

    6 C2410M-I (1/06) Installation INSTALL BACK BOX MOUNTING DIRECTLY TO A WALL OR CEILING 1. Cut a hole 3.5 inches (9 cm) in diameter in the ceiling or wall using the adapter plate as a template. 2. Connect the video cable. 3. Connect the power wires. • For 12 VDC, connect the 24 V AC/12 VDC (red) and GND (black) wires to input power . The blue wire ...

  • Pelco C2410M-1 - page 7

    C2410M-I (1/06) 7 MOUNTING TO CEILING T ILE 1. Remove the ceiling tile. 2. Using the adapter plate as a template, cut a hole 3.5 inches (9 cm) in diameter in the ceiling tile for the back box. Punch four screw holes in the ceiling tile. 3. Attach the back box to the ceiling tile and adapter plate with the four 8-32 x 1.25-inch screws (see diagram). ...

  • Pelco C2410M-1 - page 8

    8 C2410M-I (1/06) 3. If the heater is installed, plug the heater connector from the camera into the mating connector inside the base. Plug the video connector from the camera into the mating connector inside the base. T urn on power to the camera and monitor . 4. If you have a varifocal lens, hold the assembly in your hand and point the lens toward ...

  • Pelco C2410M-1 - page 9

    C2410M-I (1/06) 9 INSTALL DOME AND T RIM RING Place the trim ring and dome over the back box. If the dome has a liner , position the viewing window over the lens of the camera. Tighten the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit. Note that the screws are installed at an angle. Adjustments (Color Camera Only) If you ...

  • Pelco C2410M-1 - page 10

    10 C2410M-I (1/06) AUTO IRIS LEVEL ADJUSTMENT If you have a varifocal lens or fi xed focal length lens with an auto iris, you can adjust the level setting to increase or decrease brightness. FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS . T o adjust the focus, it may be necessary to remove the heater board in order to loosen the lock ...

  • Pelco C2410M-1 - page 11

    C2410M-I (1/06) 11 SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS Refer to the switch drawing. The switch is located next to the lens. Automatic backlight compensation (factory setting) is used under varying lighting conditions (such as outdoors) or fi xed lighting conditions where there are no bright spots that darken other picture de ...

  • Pelco C2410M-1 - page 12

    12 C2410M-I (1/06) SWITCH SETTINGS FOR V ARIFOCAL LENS The high resolution camera with varifocal lens and auto iris is confi gured at the factory for automatic exposure. For manually setting and locking the white balance, place a white background in front of camera and turn off switch 1. For gamma correction, switch to accurately reproduce scene b ...

  • Pelco C2410M-1 - page 13

    C2410M-I (1/06) 13 Specifications GENERAL Operating T emperature -50° to 122°F (-46° to 50°C) De-ices to 25°F (-4°C) Pan/T ilt Adjustment Manual; 360° pan; 180° tilt Construction Aluminum with steel camera mounting bracket and poly carbonate dome Finish White polyester powder coat trim ring with charcoal gray back box Dimensions Refer to d ...

  • Pelco C2410M-1 - page 14

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. • Three years on Genex ® Series p ...

  • Pelco C2410M-1 - page 15

    REVISION HISTORY Manual # Date Comments C2410M 11/99 Original version. C2410M 1/00 Revised installation instructions. Added FCC notices. C2410M-A 1/00 Added varifocal lens. Changed format. C2410M-B 7/00 Added information on dome liner. C2410M-C 1/01 Added heater element caution. C2410M-D 7/01 Camera module redesigned, reference ECO 1-7054/7055/7056 ...

  • Pelco C2410M-1 - page 16

    Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Home Security System

Documents that we receive from a manufacturer of a Pelco C2410M-1 can be divided into several groups. They are, among others:
- Pelco technical drawings
- C2410M-1 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco C2410M-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco C2410M-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco C2410M-1, service manual, brief instructions and user manuals Pelco C2410M-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco C2410M-1.

Similar manuals

A complete manual for the device Pelco C2410M-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco C2410M-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco C2410M-1.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco C2410M-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco C2410M-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco C2410M-1, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco C2410M-1 - which should help us in our first steps of using Pelco C2410M-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco C2410M-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco C2410M-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco C2410M-1?

Use the form below

If you did not solve your problem by using a manual Pelco C2410M-1, ask a question using the form below. If a user had a similar problem with Pelco C2410M-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)