-
LevelOne FCS-3062 - page 1
FCS- 30 62 2-Megapixel Day/ Night PoE Dome Network Camera User ’ s Manual H/W : V1.0 ...
-
LevelOne FCS-3062 - page 2
Product name: FCS- 306 2 Release Date: 201 3/12/17 Manual Revi sion: V1.0 Default Settings IP Address DHCP Username admin Password admin ...
-
LevelOne FCS-3062 - page 3
T able of Conte nt s Package Contents .......................................................................................................... 1 Hardware ........................................................................................................................ 2 Device Appea rance ................................ ................... ...
-
LevelOne FCS-3062 - page 4
E-mail Settings ............................................................................................... 50 Samba Settings .............................................................................................. 51 HTTP Settings ................................................................................................ 51 Digital ...
-
LevelOne FCS-3062 - page 5
1 Package Content s FCS- 30 62 Power Adapte r Quick Installation Guid e CD Manual/Utility ...
-
LevelOne FCS-3062 - page 6
2 Hardware Device A ppearance ...
-
LevelOne FCS-3062 - page 7
3 LED Indicators Function LED Behavior Description Power LED Continuous illumination Power on Power LED Unit Power off Link LED Continuous illumination (Orange) Link Link LED Blinking (Orange) Connecting DI/DO Diagram ...
-
LevelOne FCS-3062 - page 8
4 Hard w are Reset The Reset Button can be used to reboot the camera or restore it to factory default settings. If the camera experiences a problem, rebooting the camera may correct the problem. If the proble m remains, please restore the camera to factory default settings and reinstall the so ftware. T o Reboot Press and hold the Reset Button for ...
-
LevelOne FCS-3062 - page 9
5 Hardware Inst allation a. Remove the dome cover: Unscrew the screws and remove the dome cov er from the camera device. b. PoE, Power , DIDO, A udio Connection i. Insert the PoE, DIDO, and Audio cable through conduit hole A or B. ...
-
LevelOne FCS-3062 - page 10
6 ii. Connect the PoE (1), DIDO (2), and Aud io (3) Cables to their respective terminals. See below for more det ails regarding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power Adapter Connection Please refer to the definition of the terminal blocks below . It is also printed on the motherboard. Terminal Block Pin No. ...
-
LevelOne FCS-3062 - page 11
7 c. For wall inst allation: i. Chose the location on the wall to place the camera. ii. Drill four holes through the center of the four location holes on the sticker . iii. Hammer the four plastic anchors which are provided in the product package into the four location holes. iv. Mount the camera on the wall and position the four screw slots over t ...
-
LevelOne FCS-3062 - page 12
8 from the product packa ge to tighten the four included screws clockwise through the four holes on each side of the dev ice as shown below . T he best place to mount the camera is into a ceiling stud. W A RNING: Do not mount the came ra on a sof t material. The camera ma y fall and be damaged. e. A djust the Focus A re a i. The lens can be rotated ...
-
LevelOne FCS-3062 - page 13
9 iii. Release th e video adjustment screw an d to adjust the len s direction. After completion, tighten the video adjustment screw. f. Complete the Installation a. Place the dome cover on the camera device and slow ly turn it until it is in the desired position. b. Fasten the dome screws to secure the dome cover to the camera de vice. ...
-
LevelOne FCS-3062 - page 14
10 Camera Connection a. Basic Connection (Without PoE) b. Connect the camera device to the Ethernet hub using a RJ45 Ethernet cable. c. Connect the power adaptor to the camera dev ice. b. Power over Ethernet (PoE) Connection a. Connect the camera to a P oE -enabled hub using a single Ethernet cable. b. Connect the camera to a non-PoE hub using the ...
-
LevelOne FCS-3062 - page 15
11 System Requireme nt s Operating System: Microsoft W indows X P Home Edition SP2 Microsoft W indows X P Professional SP2 Computer: IBM PC/A T Comp atible CPU: Pentium 3GHz or faster Memory: 1024 MB or more Monitor: 1024 x 768 pixels or more, 24-bit T rue color or better Network Interface: 10/100Mbps Netw ork interfa ce card must be inst alled Web ...
-
LevelOne FCS-3062 - page 16
12 Sof tware Inst allation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. After hardware connection checking, the users can run the I nstallation W izard program included in the product C ...
-
LevelOne FCS-3062 - page 17
13 ...
-
LevelOne FCS-3062 - page 18
14 ...
-
LevelOne FCS-3062 - page 19
15 2. Do not check the box if user would like to check the hardware installation settings. Otherwise click “Skip the hardware installatio n” to skip the hardware connection checking, the program will automatically search for the Network Camera in the Intranet. Click “S tart” to continue. ...
-
LevelOne FCS-3062 - page 20
16 3. Select the Network Came ra from the survey list and enter the user name and password. T he user name and p assword are assigned as “ admin/ admin ”. ...
-
LevelOne FCS-3062 - page 21
17 4. Setting the Network Camera IP address. User can e ither select simple mode or professional mode for ne twork ca mera IP setting. If simple mo de is select ed, the e asy conf iguration program wil l set up the connection automatically . If professional mode is selected, the user will need to configure the IP manually , The DHCP setting is reco ...
-
LevelOne FCS-3062 - page 22
18 5. Please ma ke sure the inte rnet connection is read y then st art to do the internet discovery , otherwise click “Skip” to finish the setting. The default domain name is MAC address; you can also register with your own name on-line. 6. After finish setting, the connection successful or fail showed. If connection failed, user can either try ...
-
LevelOne FCS-3062 - page 23
19 continue or click “X” on the top right of t he screen to finish the install ation. Once installation is co mpleted, the A dministrator should proceed to the nex t section "Access to the Network Camera" for necessary checks and configurations. ...
-
LevelOne FCS-3062 - page 24
20 Access to the Network Camera Check Net w ork Sett ings The Network Camera can be connected either before or immediately after softw are installation onto the Local Area Network. T he Ad ministrator should complete th e network settings on the configuration page, including the correct subnet mas k and IP address of gateway and DNS. Ask your netwo ...
-
LevelOne FCS-3062 - page 25
21 A uthenti cation After opening the Web browser a nd typing in the URL o f t he Netw ork Camera, a dialogue window pops up to req uest a username an d passw ord. The user name and passw ord for the Administrat or are assigned as “ admin/admin ”. Inst alling plug- in For the initial access to the Network Camera in W indows, the web browser may ...
-
LevelOne FCS-3062 - page 26
22 Live V iew Live V iew is the default page that opens w hen accessing th e camera. L ive video is displayed directly in the browser window . Stream 1 ~3 Cha nnels The network camera offers simultaneous several streams for optimized quality and bandwidth. Go to Configuration → Camera/Video/Audi o → Video to configure the codec compression ...
-
LevelOne FCS-3062 - page 27
23 better video quality. The dow nside of using this protocol is that the quali ty of its real-time effect is less than that of the UDP protocol. UDP - This protocol allows for more real-time audio and video streams. However, network packets may be lost due to network burst traffic and images may be broken. Activate UDP connection time-sensitive re ...
-
LevelOne FCS-3062 - page 28
24 Motion Detection - Enable the motion detection alert function. Mute - Turn off the sound. Talk - To communicate through the camera using the computer MI C. Default – Reset to default view settings. NOTE 1. The <Camera Control Panel > fu nctions have no effect on the recorded video. W hatev er changes are made to the <C ...
-
LevelOne FCS-3062 - page 29
25 Configuration Click < Configuration > on the main page to change the camera settings pages. NOTE - Only Administrators can access the Configuration page. Camera/V ideo /Audio Camera ...
-
LevelOne FCS-3062 - page 30
26 Profile – Up to five profiles can be created for dif ferent lighting environments. Day , night and sunset are default profiles and users can create up to two additional profiles. Select a profile from the drop-down menu or select dif ferent ones to change profile settings. Brightness - Drag the bar to adjust the image brightness level . Contra ...
-
LevelOne FCS-3062 - page 31
27 Profile Management : Profiles can be scheduled to change at sched uled times or under different lightening changes. A lw ays - Select Always to use a single profile. Select the profile from the drop dow n menu. Day & Night - Select Day & Night to schedule two pro files for day and night. Select profiles from the drop down menu for the Da ...
-
LevelOne FCS-3062 - page 32
28 Sc hedule – Select Schedule to schedule specific time periods for different profiles. Digital Inputs - Select Digital Input to have the profile management controlled by an external sensor. Select profiles from the drop dow n menu. Profiles wil l change according to different trigger voltage levels . Click Apply to apply settings or Cancel to c ...
-
LevelOne FCS-3062 - page 33
29 Video The Network Camera offers several separate streams for different viewing options. ...
-
LevelOne FCS-3062 - page 34
30 Stream 1 ~ 3 Video Codec - The Network Camera offers three choices of video codec standards for real-time viewing: H.264, MPEG -4 and MJPEG. Video Resolution - Select from the drop-down menu to choose the best resolution recording settings. Frame Rate - Select the frame rate from drop-down menu. W hen selecting from Video Codec opti on, the fram ...
-
LevelOne FCS-3062 - page 35
31 Text To make a note about the camera, check “ Enable ” and select the display pos ition from the drop-down menu. Enter a video description in the text box. NOTE - The video overlay will only t ake ef fect in stream 1. Click Apply to apply settings or Cancel to cancel changes. RTSP Server To utilize RTSP authentication, the user must first se ...
-
LevelOne FCS-3062 - page 36
32 A udio The administrator can set up several streams for the camera for different viewing devices. The administrator can enable or disa ble the audio function on either stream. If audio enable is selected, select the Audio codec from the drop-down menu. A d vanced Settings Camera Speaker – If the speaker is enabled, select the volume from the d ...
-
LevelOne FCS-3062 - page 37
33 Privacy Mask Control The camera is equipped with a privacy fe ature which allows users to mask the whole or partially o f the camera’ s live view . Privacy Mask Control - Enable the Privacy Mask control to remotely disable liv e view and recording from the camera. Configure the privacy windows for up to three individual windows or for the full ...
-
LevelOne FCS-3062 - page 38
- 34 - Net w ork IP Settings This section explains how to configure a wired network connection for the camera. The re are several ways to setup the camera over the Internet: (1) obtain an av ailable dynamic IP address assigned by a DHCP server, (2) use a static IP, or use PPPoE (Point- to -point over Ethernet). Select the desire setup mode from the ...
-
LevelOne FCS-3062 - page 39
- 35 - 3. PPPoE (Point- to -point over Ethernet) : Use this mode if connecting to the Internet through a DSL Line. NOTE - To utilize this feature, it requires an account provided by an Internet Serv ice Provider. Enter the user name and password provided by the ISP . Click Apply to apply settings or Cancel to cancel changes. UPnP Universal Plug and ...
-
LevelOne FCS-3062 - page 40
- 36 - providers (1) DynDNS and (2) TZO NOTE - Before utilizing this function; please apply for a dynamic domain account from a DDNS provider. DynDNS – Enable the DynDNS to allow the camera to hav e a fixed host and domain name. Refer to the DynDNS website (www .d yndns.com) to apply for a dynamic domain account. W hen an acc ount has been create ...
-
LevelOne FCS-3062 - page 41
- 37 - HTTP/HTTPS HTTP – (Hypertext Transfer Protocol) - This protocol allows for TCP protocol quality without ha ving to open specific ports for streaming. U sers inside a firewall can utilize this protocol to allow streaming data through. HTTPS - (Hypertext Transfer Protocol over SSL) - This protocol allows authentication and encrypted communic ...
-
LevelOne FCS-3062 - page 42
- 38 - Multicast Multicast sends a video stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address. Therefore, multicast can effectively sav e Internet bandwidth. The RTSP (Real -Time Streaming Protocol) controls the delivery of streaming media. Cli ...
-
LevelOne FCS-3062 - page 43
- 39 - EasyLink The IP Camera is bun dled with free Le vel1DNS TM service which allows users to assign a un iqu e user name to their network camera’ s IP addr ess. There is no need to configure the router to open up ports or remember hard- to -memorize IP addresses. The default domain name is MAC address, you can also register your own name on-li ...
-
LevelOne FCS-3062 - page 44
- 40 - Event Event Settings W hen an ev ent (such as unauthorized movement) occurs, the camera can be scheduled to perform certain actions. An Event Type is a set of parameters that defines these actions. This section describes how to configure the camera to perform certain actions when events occur. Click <Add Event> on the Event Settings pa ...
-
LevelOne FCS-3062 - page 45
- 41 - How to Set Up an Event Schedule Event Schedule describes how and when the camera performs certain actions. 1. C heck “ Enable ” and enter a descriptive name for the event schedule. 2. Set Event Schedule to define w hen the event is activated by selecting from Always (24 hours), Schedule or Recurrence patter n. a. If Schedule is selected ...
-
LevelOne FCS-3062 - page 46
- 42 - i. A Scheduled Event can be programmed for certain times and day. ii. Click individual boxes to schedule specific times for the camera to detect events. ...
-
LevelOne FCS-3062 - page 47
- 43 - b. If Recurrence Pattern is selected, the following page will be displayed. i. An event schedule can be programmed to recur at different times according to the user’s needs. Select the days for the event schedul e to occur. Se lect a start time and specify the duration. 3. Define what will trigger an event to occur by selecting an option f ...
-
LevelOne FCS-3062 - page 48
- 44 - a. W hen <Se nd to Email> is selected, the following page will be shown: ii. Sender - Enter the email address of the sender. iii. Recipient - Enter the email address of the recipient. To enter multiple recipients, separate each using a comma. ...
-
LevelOne FCS-3062 - page 49
- 45 - iv. Sender’s Name – Enter the sender’s name that will appear in the recipient’s inbox. v. Subject - Enter the title of the email. 5. W hen complete, click Apply to save new event or Cancel to delete the event. The new event will appear on the event list. 6. To edit an event setting; select the event from the list. To remove an event ...
-
LevelOne FCS-3062 - page 50
- 46 - Detection Setting – Use this setting to enable and define the motion detection windows. The user can defined up to three areas on the live view window for motion detection. 1. Select <W in dow 1 >, <W in dow2>, or < W indow3> to adjust the motion detection window. 2. Check the box to enable the window. 3. Use the mouse to ...
-
LevelOne FCS-3062 - page 51
- 47 - 5. Adjust the “Threshold” to change the threshold level. The higher the threshold, the larger objects need to be to trigger an event. 6. The chart below the Live View window indicate s the activity lev el of the Motion Detection window. W hen motion is detected by the camera and exceeds the defined threshold, a red bar w il l appear. Use ...
-
LevelOne FCS-3062 - page 52
- 48 - Users can schedule an event to be trigg ered if the re is a change in the sound level of a monitored area. Audio detection can be used to measure change in t he ambient voice. Select the sensitivity from the drop-down menu. Sensitivity - is used to adjust the sensitivity of the sound level from 10 - 1 00%. Click Apply to apply settings or Ca ...
-
LevelOne FCS-3062 - page 53
- 49 - Notifications Use the tools in this section to specify w hat type of notification will be sent when an event occurs. The camera can send buffered images to an FTP server, Samba, E mail, or HTTP. FTP Settings File T ransfer Protocol (FTP) is used as an application component to automatically transfer files for program internal functions. Selec ...
-
LevelOne FCS-3062 - page 54
- 50 - E-mail Settings Select “Primary Email Server” option from the Server Selection drop down menu to send media files to an email server w hen an event is triggered. SMTP Server - Enter the server host name of the email server. SMTP Port - Enter the port number of the email server; by default, the SMTP port is set to 25. Authentication - Sel ...
-
LevelOne FCS-3062 - page 55
- 51 - Samba Settings Select this o ption t o s end the media files v ia a network neighborhood when an event is triggered. Server Address - Enter the IP address of the Samba serv er. User Name - Enter the user name of the Samba server. Password - Enter the password of the Samba server. W ork Group - Enter th e workgroup of the Samba server. Shared ...
-
LevelOne FCS-3062 - page 56
- 52 - http://ip_address/ notification.cgi?parameter ip_address – type the IP address or host name of the HTTP host. Parameter – type the notification parameter if necessary . Example URL - http ://192.168.1.1/xxxx .cgi Message - name1=value1&name2=vlaue2 Result - http://192.168.1.1/xxxx.cgi? name1=value1&name2=v laue2 Ex: https://192.1 ...
-
LevelOne FCS-3062 - page 57
- 53 - A udio Clip Audio Recording – Audio clips can be recorded and played when an event occurs. Click Browse to import a file from a local hard drive or network disk. Select the file and click Import. NOTE – The camera can only play audio clips w hich are saved as .wav files with G .71 1 u-law encoding in 8000 Hz sampling rate. To record a ne ...
-
LevelOne FCS-3062 - page 58
- 54 - Video Clip This function is u sed to determine when v ideo clips w ill be recorded and stored after an ev ent is triggered. Pre-alarm buffer - Images can be stored internally on the server from the time immediately preceding the trigger. Enter the desired length of time. Post-alarm buffer - Images can be stored internally on the server from ...
-
LevelOne FCS-3062 - page 59
- 55 - SD card Storage Management Click Apply to apply settings or Cancel to cancel changes. ...
-
LevelOne FCS-3062 - page 60
- 56 - Maintenance La nguage Select the desired language from the drop-down list. Click Apply to apply settings or Cancel to cancel changes. User Management This section explains how to enable password protection and create multiple accounts. The administrator account name i s “admin”, which is permanent and cannot be deleted. Click to create a ...
-
LevelOne FCS-3062 - page 61
- 57 - Enter the new user’s name, password and con firm password. Administrators can add up to 10 user accounts. Select the privilege level for the new user account from the drop-down list. Privilege levels can be assigned as: Administrator - user has access to view and change the Configuration page. Users with administrator privilege can cha ...
-
LevelOne FCS-3062 - page 62
- 58 - NOTE - Do not power off the camera or camera during the upgrade . Upgrade - Click Browse… and specify the firmware file. Click Upgrade . The came ra wil l begin upgrading and will reboot automatically w hen the upgrade is finished. The following message will show during the firmware upgrading process. Configuration This feature allows the ...
-
LevelOne FCS-3062 - page 63
- 59 - Reset to Default This section is used to restore the camera to default factory settings. Chec k the boxes to preserve the IP, Date and Time, or Language settings. Click Apply to restore t he camera to default factory settings. Re boot This feature will reboot the camera. Click A pp ly to begin. A message will pop up asking “T he device wil ...
-
LevelOne FCS-3062 - page 64
- 60 - System System Log Log – Set up the camera to record a system log when an event is trigg ered. This page displays the system’s log in chronological order. T he system log is stored in the camera’s buffer area and will be overwritten when the buffer area is full. Click Retrieve to retrieve the log or click Save to file to save the system ...
-
LevelOne FCS-3062 - page 65
- 61 - Date and Time T ime Zone – Select the local time zone from drop-down menu. Manual – Manually enter the date and time. Clone from PC – The camer a will sync with the time, date and time zone of the computer used to modify the camera settings. Check “Clone” to utilize this option. T he read -only date and time of the PC will be displ ...
-
LevelOne FCS-3062 - page 66
- 62 - Save File Folder Recording folder path - The destination for saving the recording video fi les. Click Browse to specify the saving path. Snapshot folder path - The destination for saving the snapshot files. Click Brow se to specify the saving path and select the format from the drop -down menu. Device Information System Information – Displ ...
-
LevelOne FCS-3062 - page 67
- 63 - Network Settings – Displays the complete network settings information of the camera. Video/Audio Settings – Displays the complete video/audio settings information of the camera. ...
Do you have a question concerning LevelOne FCS-3062?
Use the form below
If you did not solve your problem by using a manual LevelOne FCS-3062, ask a question using the form below. If a user had a similar problem with LevelOne FCS-3062 it is likely that he will want to share the way to solve it.