English dropdown-ico

Manual Genie TML-4000

28 pages 0.95 mb
Download

Go to site of 28

Summary
  • Genie TML-4000 - page 1

    Operator’ s Manual with Maintenance Information Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone + 61 7 3375 1660 Fax + 61 7 3375 1002 Genie China Phone + 86 21 53852570 Fax + 86 21 53852569 Genie Malaysia Phone + 65 98 480 775 Fax + 65 67 533 544 Genie Japan Phone + 81 3 ...

  • Genie TML-4000 - page 2

    Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Copyright © 2000 by Genie Industries First Edition: Second Printing, March 2001 Second Edition: Fourth Printing, April 2002 Third Edition: Second Printing, October 2004 "Genie" is a Registered Trademark of Genie Industries in the USA and ...

  • Genie TML-4000 - page 3

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 1 Safety Rules W arning Failure to obey the instructions and safety rules in this manual may result in death or serious injury . Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's ...

  • Genie TML-4000 - page 4

    2 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Fall Hazards Do not stand on the machine. Do not climb on the mast. Tip-over Hazards Do not raise the mast to the vertical position unless all outriggers are properly deployed, the foot pads are in firm contact with the ground and the machine is l ...

  • Genie TML-4000 - page 5

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 3 SAFETY RULES Keep away from the machine if it contacts energized power lines. Personnel must not touch or operate the machine until power lines are shut off. Do not connect wires directly to the generator. Connect auxiliary equipment only to the p ...

  • Genie TML-4000 - page 6

    4 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing SAFETY RULES T owing Hazards Read, understand and obey all of your tow vehicle manufacturer’s recommendations, warnings and instructions before towing this machine. Do not tow the machine unless the mast is lowered to the horizontal position and ...

  • Genie TML-4000 - page 7

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 5 Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid p ...

  • Genie TML-4000 - page 8

    6 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing 1 Outrigger leveling jack with footpad 2 Outrigger jack handle 3 Outrigger 4 Transport tie-down (hidden behind machine) 5 Cover Access under this cover: Engine Generator Grounding rod attachment Power outlets (Standard models) Access under opposit ...

  • Genie TML-4000 - page 9

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 7 1 Key switch 2 Hour meter 3 Circuit breaker switches for lights (4) Control Panel 4 Glow plug indicator light 5 Oil pressure indicator light Controls 6 Water temperature indicator light 7 Air filter condition indicator light 00009.9 AIR FILTER AIR ...

  • Genie TML-4000 - page 10

    8 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. Know and understand the pre-operation inspecti ...

  • Genie TML-4000 - page 11

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 9 Pre-operation Inspection o Be sure that the operator’s manual is complete, legible and in the storage container located on the machine. o Be sure that all decals are legible and in place. See Decals section. o Check for engine oil leaks and prop ...

  • Genie TML-4000 - page 12

    10 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator. Scheduled maintenance inspections shall be completed by qualified service technicians, according to the manufacturer's specificatio ...

  • Genie TML-4000 - page 13

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 11 MAINTENANCE Check the Engine Coolant Level Maintaining the engine coolant at the proper level is essential to engine service life. Improper coolant level will affect the engine's cooling capability and damage engine components. Daily checks ...

  • Genie TML-4000 - page 14

    12 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing MAINTENANCE Scheduled Maintenance Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for ...

  • Genie TML-4000 - page 15

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 13 Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. 3 Always perform function ...

  • Genie TML-4000 - page 16

    14 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Setup 1 Position the machine at the desired work site. 2 Disconnect the trailer lights and safety chains. 3 Open the latch on the coupler. 4 Pull the release pin on the tongue outrigger and rotate the outrigger towards the ground u ...

  • Genie TML-4000 - page 17

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 15 1 8 Press and hold the mast rotation lever. 1 9 Rotate the mast clockwise and then counterclockwise as far as it will go in either direction. Result: The mast should rotate smoothly and easily in both directions. 20 Rotate the mast back to its or ...

  • Genie TML-4000 - page 18

    16 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing W orkplace Inspection Fundamentals The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace. It is the opera ...

  • Genie TML-4000 - page 19

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 17 Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. 3 Always perform fu ...

  • Genie TML-4000 - page 20

    18 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing OPERATING INSTRUCTIONS T o Raise the Mast 1 Unlock the mast hold-down latch. 2 Turn the Raise/Lower winch handle clockwise until the mast reaches the full vertical position and the front spring latch locks the mast firmly in place. T o Extend the ...

  • Genie TML-4000 - page 21

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 19 T owing 1 Make sure the mast hold-down latch is securely locked in place. 2 Make sure the covers are closed and secured. 3 Push to release the lock handle on each of the side outriggers and place in the stowed position. Make sure the spring pins ...

  • Genie TML-4000 - page 22

    20 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing T ransport and Lifting Instructions Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift. The transport vehicle must be parked on a level surface. The transpor ...

  • Genie TML-4000 - page 23

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 21 Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight. See the serial plate for the machine weight. TRANSPORT AND ...

  • Genie TML-4000 - page 24

    22 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Shading indicates decal is hidden from view, i.e. under covers Decal Inspection Use the pictures on the next page to verify that all decals are legible and in place. Below is a numerical list with quantities and descriptions. Part No. Description ...

  • Genie TML-4000 - page 25

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 23 52475 28164 97602 28171 72828 72828 97661 97602 28161 28161 72874 82224 82237 82224 82224 97518 97635 97635 97518 82224 97635 97635 82223 82223 82222 72889 65414 65414 72871 or 82219 or 82957 72870 72870 28164 28161 28161 65421 72018 72890 28159 ...

  • Genie TML-4000 - page 26

    24 Genie TML-4000 and TML-4000N Part No. 97600 Operator's Manual Third Edition • Second Printing Specifications Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. Model - TML-4000 Standard Height, stowed 71 in 1.8 m Length, stowed 14 ft 7 in 4.4 m Width, stowed ...

  • Genie TML-4000 - page 27

    Operator's Manual Third Edition • Second Printing Part No. 97600 Genie TML-4000 and TML-4000N 25 Reporting Safety Defects Genie Industries PO Box 97030 Redmond, WA 98073-9730 Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the Natio ...

  • Genie TML-4000 - page 28

    Operator’ s Manual with Maintenance Information Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone + 61 7 3375 1660 Fax + 61 7 3375 1002 Genie China Phone + 86 21 53852570 Fax + 86 21 53852569 Genie Malaysia Phone + 65 98 480 775 Fax + 65 67 533 544 Genie Japan Phone + 81 3 ...

Manufacturer Genie Category Portable Generator

Documents that we receive from a manufacturer of a Genie TML-4000 can be divided into several groups. They are, among others:
- Genie technical drawings
- TML-4000 manuals
- Genie product data sheets
- information booklets
- or energy labels Genie TML-4000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Genie TML-4000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Genie TML-4000, service manual, brief instructions and user manuals Genie TML-4000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Genie TML-4000.

Similar manuals

A complete manual for the device Genie TML-4000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Genie TML-4000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Genie TML-4000.

A complete Genie manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Genie TML-4000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Genie TML-4000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Genie TML-4000, that we can find in the current document
3. Tips how to use the basic functions of the device Genie TML-4000 - which should help us in our first steps of using Genie TML-4000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Genie TML-4000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Genie TML-4000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Genie TML-4000?

Use the form below

If you did not solve your problem by using a manual Genie TML-4000, ask a question using the form below. If a user had a similar problem with Genie TML-4000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)