English dropdown-ico

Manual Kathrein UFS 710si

88 pages 6.11 mb
Download

Go to site of 88

Summary
  • Kathrein UFS 710si - page 1

    Operating manual - englisch - DVB Satellite Receiver UFS 710si/710sw ...

  • Kathrein UFS 710si - page 2

    2 Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE EUROPEAN P ARLIAMENT AND THE COUNCIL dated 27 th January 2003 on used electrical and electronic appliances, it must be disposed of properly . At the end of its service life, take this unit for disposal to an appropriate of fi cial collection point. Used b ...

  • Kathrein UFS 710si - page 3

    3 IMPORT ANT INFORMA TION SWITCHING OFF THE RECEIVER AND UPDA TING THE EPG By pressing the  button you can switch the receiver out of TV mode and into standby mode. Pressing any of the numeric buttons returns it from standby mode into operating mode. Every night at 03:00 the receiver automatically starts to update the EPG data. This updates the ...

  • Kathrein UFS 710si - page 4

    4 CONTENTS PREF ACE .............................................................................................................................. ... 2 IMPORT ANT INFORMA TION ...................................................................................................... 3 CONTENTS ........................................................... ...

  • Kathrein UFS 710si - page 5

    5 CONTENTS “LAST FUNCTION” MEMOR Y .................................................................................................. 54 MOVE CHANNELS ............................................................................................................... 54 DELETE CHANNELS ................................................................ ...

  • Kathrein UFS 710si - page 6

    6 SAFETY INSTRUCTIONS - IMPORT ANT NOTES ...

  • Kathrein UFS 710si - page 7

    7 RECEIVER FEA TURES/SCOPE OF SUPPL Y - UFS 710si (silver) or UFS 710sw (black) - Remote control RC 660 - Scart cable - 2 Batteries AAA 1.5 V - Power supply cable - Operating manual PRODUCT P ACKAGE The UFS 710si and UFS 710sw receivers are suitable for receiving digital satellite TV and radio channels. The built-in Common Interface offers space fo ...

  • Kathrein UFS 710si - page 8

    8 CONTROLS, DISPLA YS AND CONNECTIONS This section provides a brief description of all the controls, displays and connections. Front panel controls and displays 1. On/Off switch (with mains disconnect) 2. Display (cover folded down) 3. Common Interface for two CA modules for Pay-TV cards * ) 4. Ejection button for CA modules In addition there are t ...

  • Kathrein UFS 710si - page 9

    9 CONNECTION AND SET -UP The following section is intended speci fi cally for specialist dealers. Y ou only need read this section if you are performing the installation yourself. The “Connection Examples” section provides a sample con fi guration. Do not connect the unit to the mains until all installation work has been properly carried out. ...

  • Kathrein UFS 710si - page 10

    10 CONNECTION AND SET -UP Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection Example”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection. Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/PVR. For sys ...

  • Kathrein UFS 710si - page 11

    11 REMOTE CONTROL  Sound on/off  ...  Switch on/input digits for channels, timer etc.  Call up Main Menu, exit the menu and return to the TV picture (red) Call up favorites selection ! (green) “Current” view in the EPG % V olume  Exit menu step by step  Changing channel in the programme guide (EPG)  T ransparent videotext ? ...

  • Kathrein UFS 710si - page 12

    12 The RC 660 remote control supports up to four devices (which are supplied with the RC 660 as standard) as well as the receivers of the UFD 5xx (not UFD 552, 554, 558) and UFD 4xx families. First switch all receivers off (at the power switch). T o con fi gure a receiver to an infrared code: Switch on the relevant receiver . On the remote control ...

  • Kathrein UFS 710si - page 13

    13 FIRST INST ALLA TION: General Before using your unit for the fi rst time, read the “Safety Instructions” and “Connection and Setup” sections. The “Connection examples” section provides a sample con fi guration. Do not connect the unit to the power supply until all installation work has been properly carried out. The guidance given ...

  • Kathrein UFS 710si - page 14

    14 Use the  buttons here to select the settings for your TV set. When doing this, refer to the operating instructions for your TV set! TV aspect ratio Here you select the TV format. Either 4:3 or 16:9 FIRST INST ALLA TION: General Use the  buttons to select whether to replace the default channel list with one presorted for Germany ...

  • Kathrein UFS 710si - page 15

    15 FIRST INST ALLA TION: General Picture format Here you select the type of screen display , depending on the setting of your TV format: - TV format “4:3”: Pan & Scan or Letterbox - TV format “16:9”: Always 16:9 or automatic TV -SCART -Output Select the type of video signal at the TV Scart socket here. Select the signal that your TV set ...

  • Kathrein UFS 710si - page 16

    16 Number of Satellites Use the  buttons to select how many satellites (max. 4) you would like to receive with your reception system. The following display appears (example): FIRST INST ALLA TION: DiSEqC™1.0 Use the  buttons to select the fi rst satellite slot. Press  to access the menu for the satellite settings. The following di ...

  • Kathrein UFS 710si - page 17

    17 FIRST INST ALLA TION: DiSEqC™1.0 LNB T ype Here use the  buttons to select the LNB type used in your system. The choice is between “Universal” and “User-de fi ned”. Universal: No further input is required, since all necessary frequency ranges are covered by a universal LNB. User-de fi ned: If you choose not to use a universal L ...

  • Kathrein UFS 710si - page 18

    18 FIRST INST ALLA TION: SIMPLE LNB Satellite and position Use the  buttons to select the desired satellite whose signal is to be received by the tuner . When you have selected your desired satellite, use the  buttons to switch to the selection of the “LNB T ype”. LNB T ype Here use the  buttons to select the LNB type used in ...

  • Kathrein UFS 710si - page 19

    19 FIRST INST ALLA TION: SIMPLE LNB User-de fi ned: If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was con fi gured. Use the  buttons to select the frequency range to be changed (low , high or limit frequency). Use the  buttons or the digital input buttons to set the exact frequency ...

  • Kathrein UFS 710si - page 20

    20 FIRST INST ALLA TION: Single-cable system Use the  buttons here to select “One Cable” as the “System”. Press the  button to move to the next menu item. The following display appears: Number of Satellites Use the  buttons to select how many satellites (max. 2) you would like to receive with your reception system. Press the ...

  • Kathrein UFS 710si - page 21

    21 Universal: No further input is required, since all necessary frequency ranges are covered by a universal LNB. Wideband: No further input is necessary , since all frequency ranges are set by the Wideband LNB. User-de fi ned: If you are not using a Universal or a Wideband system, you must set the frequencies here. Y ou can fi nd the necessary in ...

  • Kathrein UFS 710si - page 22

    22 FIRST INST ALLA TION: Single-cable system (Automatic) The receiver searches for the transmission channels on your single-cable system and shows in the next display the available transmission channels. Use the  buttons to select the transmission channel you want and con fi rm the selection with the  button. The receiver now reads the ex ...

  • Kathrein UFS 710si - page 23

    23 Connected equipment Use the  buttons to select the type of system to which they are connected or the single-cable system components fi tted (refer to the manuals, instructions and notes for the system and the system components). Available options: - User-de fi ned - KA THREIN UAS 481 (single-cable feed system, max. four receivers) - KA T ...

  • Kathrein UFS 710si - page 24

    24 FIRST INST ALLA TION: Single-cable system (Manual) If no connection to the single-cable system could be established, the following display appears: Check your settings (frequency and transmission channel) and if necessary call for expert help. Press the  button to acknowledge this display . Then press the  button. Y ou will be asked whethe ...

  • Kathrein UFS 710si - page 25

    25 Selection “UAS 481” or “EXR 551” T ransmission channel Use the  buttons to select a free available transmission channel. A maximum of four transmission channels are available (1400, 1516, 1632 and 1748 MHz). T est connection When you have set a free transmission channel, press the  buttons to switch to the “T est connection ...

  • Kathrein UFS 710si - page 26

    26 Selection “EXR 552” T ransmission channel Use the  buttons to select a free available transmission channel. A maximum of two transmission channels are available (1400 and 1516 MHz). T est connection When you have set a free transmission channel, press the  buttons to switch to the “T est Connection” selection fi eld and pres ...

  • Kathrein UFS 710si - page 27

    27 FIRST INST ALLA TION: Single-cable system (Manual) Selection “EXU 908” T ransmission channel Use the  buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz). Secure channel with PIN The EXU 908 single-cable matrix allows the ...

  • Kathrein UFS 710si - page 28

    28 FIRST INST ALLA TION: Single-cable system (Manual) Selection “4 subscriber” T ransmission channel Use the  buttons to select a free available transmission channel. A maximum of four transmission channels are available (1284, 1400, 1516 and 1632 MHz). T est connection When you have set a free transmission channel, press the  butto ...

  • Kathrein UFS 710si - page 29

    29 FIRST INST ALLA TION: Single-cable system (Manual) Selection “8 subscriber” T ransmission channel Use the  buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz). T est connection When you have set a free transmission channe ...

  • Kathrein UFS 710si - page 30

    30 Execute Channel search Use the  buttons to select (yes or no) whether you wish to start a channel search. It is not essential to start a channel seach; instead you can use the factory pre-programmed channels. However the channels do change from time to time (e.g. their frequencies change), which the receiver does not automatically detect, ...

  • Kathrein UFS 710si - page 31

    31 Local time offset Use the  buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour). Use the  buttons to switch to the “Automatic clock change” fi eld. Use the  buttons to select whether the receiver should automatically change over to and from summer and winter time. If “On” is selecte ...

  • Kathrein UFS 710si - page 32

    32 OPERA TING INSTRUCTIONS The structure of the menu concept is based on logical operating sequences. The programme showing on the current selected channel always appears in the top right-hand corner of the screen. Y ou will fi nd detailed descriptions of the selected menu items in the relevant sections of the operating manual! Note: The selected ...

  • Kathrein UFS 710si - page 33

    33 MENU TREE OPERA TING INSTRUCTIONS Main Menu Call up the Main Menu by pressing the  button ...

  • Kathrein UFS 710si - page 34

    34 OPERA TING INSTRUCTIONS The language for the on-screen display is set as follows:  →  → Language Setting →  →  → English →  Available options: German, English, Italian, French, Dutch, Spanish, Czech and T urkish. After you have performed the settings, press the  or the  button to exit the Main Menu. Y ou wi ...

  • Kathrein UFS 710si - page 35

    35 ON-SCREEN DISPLA YS (OSD) Channel information is shown for a few seconds each time the channel is changed (this can be changed under “Settings”, “Adjust Displays”) or displayed continuously by pressing the  button. The information for the current radio channel has the same layout. Channel name Channel number from the overall list Numb ...

  • Kathrein UFS 710si - page 36

    36 Press the " (yellow) button once (twice for portal channels) to view further soundtrack selection options, if these are transmitted by the channel provider . Use the  buttons to scroll through the available selection options. Pressing the " (yellow) button again, or pressing the  button exits this display again. OPTION SELECTI ...

  • Kathrein UFS 710si - page 37

    37 T o the right of it you see the current channel list sort order as selected by you.The channel list can show channels sorted by various selection and sorting criteria. Selection and sorting options: - Press the (red) button to call up the favorites list selection. The  buttons allow you to scroll through the existing favorites lists. - Pre ...

  • Kathrein UFS 710si - page 38

    38 EPG - ELECTRONIC PROGRAMME GUIDE CALLING UP THE EPG The EPG is called up by pressing the  button. Each time the EPG is called up, you will automatically be shown the “Current” view , irrespective of which view you were shown the last time you exited the EPG. The following display appears (example): Channel number from the overall list, ch ...

  • Kathrein UFS 710si - page 39

    39 EPG - ELECTRONIC PROGRAMME GUIDE Selection options: - (red) button Calls up the plan recording (display of all pre-programmed recordings) -  button Jump the “Current” view forwards by 15 minutes - " (yellow) button Call up a preview of the currently highlighted channel - # (blue) button Call up the category selection (sorting the pro ...

  • Kathrein UFS 710si - page 40

    40 PREVIEW VIEW (PROGRAMME LISTINGS) The Preview view (TV Program Guide) can be called up at any time in EPG by pressing the " (yellow) EPG - ELECTRONIC PROGRAMME GUIDE button. In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list of selected channels. Provided that EPG data has been su ...

  • Kathrein UFS 710si - page 41

    41 EPG - ELECTRONIC PROGRAMME GUIDE CA TEGORIES VIEW The “Categories” view can be called up at any time in EPG by pressing the # (blue) button. In the “Categories” view you can see all programmes sorted by category and starting time. The following categories are available for selection: Movies, Series, Sport, Children’s programmes, Chat s ...

  • Kathrein UFS 710si - page 42

    42 SEARCH FUNCTION The search function can be called up at any time in EPG by pressing the  button. The search function allows you to search for programmes based on their additional information or their name. Use the keypad to input the desired search expression (see also “Operating Instructions” “Alphanumeric Input”). When you have inpu ...

  • Kathrein UFS 710si - page 43

    43 EPG - ELECTRONIC PROGRAMME GUIDE ADDITIONAL INFORMA TION (i BUTTON) The additional information can always be called up by pressing the  button whenever the “i symbol” appears in front of the program name (see screenshot on the right). First however the channel must be selected. The following display appears (example): The additional infor ...

  • Kathrein UFS 710si - page 44

    44 RECORDING (TIMER) The  (red dot) button allows you to set up a programme at any time for recording on an external recorder . The programme to be recorded can be selected in any of the EPG views, provided the  (red dot) button appears at the bottom of the screen display . Programme present in the EPG: Select the desired programme and press ...

  • Kathrein UFS 710si - page 45

    45 EPG - ELECTRONIC PROGRAMME GUIDE RECORD ONCE Use the  buttons to select the recording mode “once” (see screenshot item “Recording (T imer)”). Use the  buttons to switch to the selection fi eld “Date” and use the  buttons to select the desired recording date. Use the  buttons to switch to the selection fi eld ...

  • Kathrein UFS 710si - page 46

    46 RECORD WEEKL Y Use the  buttons to select the recording mode “weekly” (see screenshot below). Use the  buttons to switch to the selection fi eld “Start” and use the  buttons or the numeric pad to select the desired recording starting time. Use the  buttons to switch to the selection fi eld “End” and use the ...

  • Kathrein UFS 710si - page 47

    47 Use the  buttons to switch to the selection fi eld “End” and use the  buttons or the numeric pad to select the desired recording ending time. When all settings have been made, press the  button to save the recording settings. Y ou can view the recording in the T imer List view of the EPG (see item “Plan recording”). SERIE ...

  • Kathrein UFS 710si - page 48

    48 EPG - ELECTRONIC PROGRAMME GUIDE PLAN RECORDING The “T imer List” view can be called up at any time in EPG by pressing the (red) button. The timer list view shows you all the recordings that are scheduled. The  buttons allow the recordings to be sorted into “once-only recording” or “Repeating” recordings. The cursor buttons ( ? ...

  • Kathrein UFS 710si - page 49

    49 COMMON INTERF ACE Always follow the operating instructions from your Pay-TV provider and the instructions supplied with the Smartcard and the CA module! Smartcards and CA modules are not included with this product! The cards and modules are issued by the respective Pay-TV providers, and contain the subscriber data and details of the channels for ...

  • Kathrein UFS 710si - page 50

    50 Y ou can fi nd out which Conditional Access modules are in the CI slots on the UFS 710 and which Smartcard is in which CA module from the “Mainmenu” under “Settings”, and the “Common Interface” menu. Con fi rmation is by pressing the  button. Use the  buttons to select one of the two slots in which the CA module is located ...

  • Kathrein UFS 710si - page 51

    51 VIDEOTEXT (TELETEXT) This symbol in the channel noti fi cation shows you whether Videotext/T eletext is available for the selected channel. When you press the  button, the receiver processes the broadcast Videotext/T eletext service for your TV set to display , even when the signal is encrypted. During the search, the page which is being sea ...

  • Kathrein UFS 710si - page 52

    52 EDIT CHANNEL LIST Select the “Edit TV -Channellist” menu using the menu button  , the  buttons on the main menu and  . When the menu is called up, the standard setting is for the receiver to show the “All Satellites” channel list with all channels available on the satellites that are being received. SELECTION OF THE LIST/CHAN ...

  • Kathrein UFS 710si - page 53

    53 EDITING LISTS/CHANNELS When you have selected the channel or channel list to be edited, press the  (red dot) button to call up the edit menu. Y ou have the following edit options: - Move: Channel can be moved within the current list to another channel slot - Delete: Delete the channel from the current list - Skip: Channel will be skipped when ...

  • Kathrein UFS 710si - page 54

    54 DELETE CHANNELS Use the  buttons to select the channel to be deleted from the current channel list. Press the  button to call up the edit menu and use the  buttons to select the “Delete” function. Con fi rm the command by pressing the  button. EDIT CHANNEL LIST SKIP CHANNELS Use the  buttons to select the channel to ...

  • Kathrein UFS 710si - page 55

    55 LOCK CHANNELS Use the  buttons to select the channel to be locked in the current channel list. Press the  button to call up the edit menu and use the  buttons to select the “Lock” function. Con fi rm the command by pressing the  button. Y ou are now prompted to enter the PIN code (factory default setting: 0000). The channe ...

  • Kathrein UFS 710si - page 56

    56 EDIT CHANNEL LIST EDIT F A VORITES LISTS When you have selected the Favorites List to be edited (called up using the (red) button and selected using the  buttons), press the  (red dot) button to call up the edit menu. Y ou have the following edit options: - Remove from the Favorites List: The channel will be removed from the Favorites L ...

  • Kathrein UFS 710si - page 57

    57 LOCK CHANNELS Use the  buttons to select the channel to be locked from the Favorites List you have selected. Press the  button to call up the edit menu and use the  buttons to select the “Lock” function. Con fi rm the command by pressing the  button. Y ou are now prompted to enter the PIN code (factory default setting: 000 ...

  • Kathrein UFS 710si - page 58

    58 SEARCH CHANNELS (CHANNEL SEARCH) Select the “Search Channels” menu using the menu button  , the  buttons on the main menu and  . Y ou have three options for a channel scan: - Automatic Channel Search - all transponders for the satellite you selected will be scanned - Manual Channel Search - only the selected transponder for the s ...

  • Kathrein UFS 710si - page 59

    59 Satellite Select the satellite to be scanned, using the  buttons. Make sure your reception system is aligned to the selected satellite. Y ou can scan only one satellite at a time. If you have connected a multi-feed reception system (e.g. reception of ASTRA 19.2° East and HOTBIRD 13° East), you must repeat this procedure once for each sat ...

  • Kathrein UFS 710si - page 60

    60 Newly found channels are identi fi ed with the designation “new” after the channel name. After completion of the search, you will see the following message (example): Press the  button. Y ou will be asked whether you wish to save the changes or not. Selection is performed using the  buttons and is con fi rmed using the  button. ...

  • Kathrein UFS 710si - page 61

    61 SEARCH CHANNELS (CHANNEL SEARCH) The  buttons allow you to select different sets of parameters for the scan. Satellite Use the  buttons to select the satellite on which the transponder you wish to scan is located. Make sure your reception system is aligned to the selected satellite. Y ou can scan only one transponder at a time. If yo ...

  • Kathrein UFS 710si - page 62

    62 Press the  button. Y ou will be asked whether you wish to save the changes or not. Selection is performed using the  buttons and is con fi rmed using the  button. If you select “Y es, save changes”, the newly found channels will be added to the end of the channel list. Then press the  button to exit the menu. The channel list ...

  • Kathrein UFS 710si - page 63

    63 Press the  button to move to the next selection item. T ransponder Frequency Use the  buttons or the numeric keypad to select the transponder frequency on which the channel being sought is transmitted. At the bottom right of the screen display , the receiver shows the current signal strength and signal quality of the selected transponde ...

  • Kathrein UFS 710si - page 64

    64 P ARENT AL CONTROL Select the “Parental control” menu using the menu button  , the  buttons on the main menu and  . Y ou are now prompted to enter the PIN code (factory default setting: 0000). After entering the PIN using the numeric keypad you are shown the following display: Select the parameters to be changed using the  ...

  • Kathrein UFS 710si - page 65

    65 Press the  button to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat the new PIN code once again. Con fi rm the change of PIN code by pressing the  button. DEFINE NEW PIN CODE P ARENT AL CONTROL Keep your password in a safe place, so that you always have access to your channels even if you ...

  • Kathrein UFS 710si - page 66

    66 SETTINGS The selected menus, sub-menus and positions, as well as the parameters to be set, are each highlighted in colour . The menus are to a large extent self-explanatory . Pay attention to the bar at the bottom of the on-screen display . These provide information on what to do next. Select the “Settings” menu using the menu button  , t ...

  • Kathrein UFS 710si - page 67

    67 Here you can use the  buttons to select the type of video signal at the TV Scart socket. Select the signal that your TV set can process. When doing this, refer to the operating instructions for your TV set! • CVBS – Composite colour baseband signal (colour/picture/blanking/synchronization signal) • RGB – Red/Green/Blue signal or ? ...

  • Kathrein UFS 710si - page 68

    68 Here you can use the  buttons to select the type of video signal at the VCR Scart socket. Select the signal that your external recorder can process. When doing this, refer to the operating instructions for your recorder! • CVBS – Composite colour baseband signal (colour/picture/blanking/synchronization signal) • Y/C – S-V ideo sign ...

  • Kathrein UFS 710si - page 69

    69 SETTINGS Use the  buttons to select the time after which you want the on-screen channel noti fi cation display to be automatically cancelled. The options available are “Of f”, 1, 2, 3, 4, 5 or 6 seconds. CHANNEL OSD DURA TION Use the  buttons (On/Off) to specify whether the volume bar is displayed when adjusting the volume. DISP ...

  • Kathrein UFS 710si - page 70

    70 SETTINGS DA TE AND TIME COMMON INTERF ACE See “Common Interface” section ANTENNA CONFIGURA TION See “First Installation” section, pages 14ff Local time offset Use the  buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour). Use the  buttons to switch to the “Automatic clock change” fi e ...

  • Kathrein UFS 710si - page 71

    71 SER VICE MENU Select the “Service” menu using the menu button  , the  buttons on the main menu and  . The following display appears: Current software version Channel list status Last update run UPDA TE SOFTW ARE Hardware version Use the  buttons to select from the displayed options and press  to con fi rm your selection ...

  • Kathrein UFS 710si - page 72

    72 SER VICE MENU Also pay attention to the bars at the bottom of the on- screen display! These provide information on what to do next. Update Software If new software is available (but only then), use the  buttons (No/Y es) to select whether you wish to load the new software that is available. If you are unsure whether you wish to load the ne ...

  • Kathrein UFS 710si - page 73

    73 RESTORE F ACT ORY DEF AUL T SETTINGS Select the “Service” menu using the menu button  , the  buttons on the main menu and  . Use the  buttons to switch to “Restore factory default settings” and to call them up press the  button. The following display appears: Press the  button to load the factory default settings. ...

  • Kathrein UFS 710si - page 74

    74 CONNECTING UP THE VIDEO/PVR For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder . In order to make a PVR recording (Record), the satellite receiver must be switched on or the timers must be pre-programmed (see “EPG ...

  • Kathrein UFS 710si - page 75

    75 USING THE FRONT P ANEL If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver from the front panel. BACKUP OPERA TION There are three buttons on the front of the receiver . TV/R button: Pressing the TV/R button switches the receiver from TV mode to radio mode. Pressing the TV/R button a sec ...

  • Kathrein UFS 710si - page 76

    76 TECHNICAL APPENDIX FEA TURES ¹ ) CA modules and Smartcards not included in the delivery scope ² ) Display of information only if broadcast by the programme provider  Reception of digital TV and radio satellite programmes  4,000 channel memory positions  16-character alphanumeric display with status icons for indication of channel name ...

  • Kathrein UFS 710si - page 77

    77 TECHNICAL APPENDIX T ype UFS 710si UFS 710sw Order no./colour 20210109/silver 202101 10/black RF properties Input frequency range MHz 950-2150 Input level range dBµV 44-83 Reception threshold (EB/NO) dB < 4.5 TV system, video Modulation, FEC, demultiplexer DVB-S standard Video resolution CCIR 601 (720 x 576 lines) Input data rate MSymb/s 2-4 ...

  • Kathrein UFS 710si - page 78

    78 Signal Pin no. TV VCR/AUX Right audio output 1 X X Right audio input 2 X Left audio output 3 X X Audio earth 4 X X Blue earth 5 X X Audio left input 6 X Blue signal 7 X X Switching voltage 8 X X Green earth 9 X X Data signal 10 Green signal 1 1 X X Data signal 12 Red earth 13 X X Data earth 14 Red signal (C) 15 X X Blanking signal 16 X X Video e ...

  • Kathrein UFS 710si - page 79

    79 Scart Scart Digitalton AC 3 optisch/elektrisch Infrarot-Empfänger (optional) LW L CONNECTION EXAMPLE TECHNICAL APPENDIX Dolby Digital system Digital audio AC 3 optical/electrical LW L Cinch Scart Cinch Scart PVR (VCR) Infra-red receiver (optional) Hi- fi system ...

  • Kathrein UFS 710si - page 80

    80 TECHNICAL APPENDIX EXAMPLES single-cable systems EXR 501/551/552 Single-cable switching matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF 4 x single – or 2 x twin receivers ...

  • Kathrein UFS 710si - page 81

    81 TECHNICAL APPENDIX UAS 481 Single-cable feed system * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 ...

  • Kathrein UFS 710si - page 82

    82 TECHNICAL APPENDIX EXR 1581/2581 Single-cable matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF ...

  • Kathrein UFS 710si - page 83

    83 EXU 908 Single-cable matrix * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 TECHNICAL APPENDIX Sat IF 2 x Quatro LNB UAS 484/584 ...

  • Kathrein UFS 710si - page 84

    84 SHORT TECHNICAL GUIDE DISEQC™ DiSEqC™ (Digital Satellite Equipment Control) is a communication system between a satellite receiver (master) and the peripheral satellite components (slaves), such as LNBs, multi-switches, rotating antenna systems. It is a single master/multi-slave system, i.e. there is only ever one master in the satellite sys ...

  • Kathrein UFS 710si - page 85

    85 PID The PID (Packet IDenti fi cation) number is an identi fi cation number for video signals and audio signals in the digital data stream of DVB-MPEG-2 signals. The receiver uses the PID number to create a unique assignment for the video and audio data transmission. The PCR PID is the identi fi cation number for the synchronization signal. Th ...

  • Kathrein UFS 710si - page 86

    86 SHORT TECHNICAL GUIDE AC 3 Output for Dolby Digital signal Audio output Sound output on the receiver A V programme pos. Preferred programme position on TV set for Scart input CA Conditional Access (for decoding of encrypted programmes) CI Internationally standardised interface for CA modules Decoder Decoder for Pay TV DiSEqC™ Control system be ...

  • Kathrein UFS 710si - page 87

    87 TROUBLESHOOTING In the event of a malfunction, fi rst check all the cable connections and operating states: 1. Receiver and TV set power plugs are connected to the wall socket 2. Antenna cables are located on the receiver input 3. Receiver and TV set correctly interconnected by a Scart or cinch cable 4. Audio connections are made to Hi-Fi or Do ...

  • Kathrein UFS 710si - page 88

    Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 100 444 • 83004 Rosenheim GERMANY 936.3200/D/0209/ZWT - T echnical data subject to change. ...

Manufacturer Kathrein Category Satellite TV System

Documents that we receive from a manufacturer of a Kathrein UFS 710si can be divided into several groups. They are, among others:
- Kathrein technical drawings
- UFS 710si manuals
- Kathrein product data sheets
- information booklets
- or energy labels Kathrein UFS 710si
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kathrein UFS 710si.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kathrein UFS 710si, service manual, brief instructions and user manuals Kathrein UFS 710si. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kathrein UFS 710si.

Similar manuals

A complete manual for the device Kathrein UFS 710si, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kathrein UFS 710si by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kathrein UFS 710si.

A complete Kathrein manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kathrein UFS 710si - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kathrein UFS 710si, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kathrein UFS 710si, that we can find in the current document
3. Tips how to use the basic functions of the device Kathrein UFS 710si - which should help us in our first steps of using Kathrein UFS 710si
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kathrein UFS 710si
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kathrein UFS 710si in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kathrein UFS 710si?

Use the form below

If you did not solve your problem by using a manual Kathrein UFS 710si, ask a question using the form below. If a user had a similar problem with Kathrein UFS 710si it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)