English dropdown-ico

Manual Vulcan-Hart ML-52918

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart ML-52918 - page 1

    VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 INST ALLA TION & OPERA TION MANUAL SPER1 & SPER2 ELECTRIC FR YERS MODEL SPER1 ML-52918 SPER2 ML-52919 SPER0 Frymate ML-52920 FORM 30729 Rev. A (1-95) SPER1 & 2 ...

  • Vulcan-Hart ML-52918 - page 2

    — 2 — Installation, Operation and Care of MODEL SPER1 & SPER2 ELECTRIC FR YERS PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE GENERAL Your Vulcan fryer is produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance. Vulcan-Hart Company suggests ...

  • Vulcan-Hart ML-52918 - page 3

    — 3 — INSTALLATION CODES AND STANDARDS Your Vulcan fryer must be installed in accordance with: 1. State and local codes. 2. The National Electrical Code, ANSI/NFPA No. 70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. 3. NFPA Standard #96. LEVELING Place a carpenter&a ...

  • Vulcan-Hart ML-52918 - page 4

    — 4 — PL-40545-1 Power On Light High Limit Lights Temperature Controller Power Switch Trouble Light Fry / Melt Switch Heating Light OPERA TION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. BEFORE FIRST USE Cleaning Clean the fryer thoroughly, following the procedures described in this man ...

  • Vulcan-Hart ML-52918 - page 5

    — 5 — POWER SWITCH — Controls electric supply to fryer (Optional - hood ventilator to interlock.) POWER ON LIGHT — Indicates when electric supply is on. TEMPERATURE CONTROLLER — Maintains frying temperature by controlling power supply. HEATING LIGHT — When on, indicates temperature control is calling for power to the elements. FRY/MELT ...

  • Vulcan-Hart ML-52918 - page 6

    — 6 — Split Vat 1. Remove crumb screens. 2. Divide a 50-pound block of shortening into two equal halves (approximately 25 pounds each). 3. Place each half of the shortening directly on the heating elements in each well of the fry tank and slide back. 4. Place crumb screens on top of shortening in tank. Single Vat 1. Remove crumb screen. 2. Plac ...

  • Vulcan-Hart ML-52918 - page 7

    — 7 — PL-40547-1 Drain Valves Drain Nipple 1. Allow shortening to cool before draining or filling. 2. Consult the operating instructions supplied by the manufacturer of your filtering system before filtering the shortening. 3. Firmly screw the fryer drain nipple (supplied) into the fryer drain valve (Fig. 2). Position your filtering container u ...

  • Vulcan-Hart ML-52918 - page 8

    — 8 — SHORTENING MAINTENANCE Shortening life may be extended by following these important procedures. Do not salt foods over the fryer. Use good quality shortening. Filter shortening daily at a minimum. Keep equipment and surroundings clean. Set thermostats correctly. Do not use excessively high temperatures. Remove excess moisture and particle ...

  • Vulcan-Hart ML-52918 - page 9

    — 9 — PL-40546-1 Reset Button 7. Turn power switch OFF at termination of burn-off cycle. 8. Heating elements will heat up in excess of 600 ° F glowing red. If any do not glow, call a Vulcan- authorized service agency. Some smoking, crackling sound and puffs of flame will occur. This is normal. If excessive flaming occurs, turn power switch OFF ...

  • Vulcan-Hart ML-52918 - page 10

    — 10 — 6. Drain solution and discard. Close drain valve and fill tank half full with water. 7. Scrub entire inside of tank with a stiff bristle nylon brush. 8. Drain solution and rinse tank thoroughly with clean water. 9. Close drain valve and refill tank with clean hot (minimum 140 ° F) water. Add 1 cup of vinegar to neutralize alkaline left ...

  • Vulcan-Hart ML-52918 - page 11

    — 11 — MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE PERFORMING ANY MAINTENANCE. CALIBRATION PROCEDURES 1. Monitor shortening temperature 1" below the surface with an accurate temperature measuring device. 2. Turn power s ...

  • Vulcan-Hart ML-52918 - page 12

    — 12 — FORM 30729 Rev. A (1-95) PRINTED IN US.A. ...

Manufacturer Vulcan-Hart Category Fryer

Documents that we receive from a manufacturer of a Vulcan-Hart ML-52918 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- ML-52918 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart ML-52918
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart ML-52918.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart ML-52918, service manual, brief instructions and user manuals Vulcan-Hart ML-52918. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart ML-52918.

Similar manuals

A complete manual for the device Vulcan-Hart ML-52918, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart ML-52918 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart ML-52918.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart ML-52918 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart ML-52918, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart ML-52918, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart ML-52918 - which should help us in our first steps of using Vulcan-Hart ML-52918
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart ML-52918
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart ML-52918 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart ML-52918?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart ML-52918, ask a question using the form below. If a user had a similar problem with Vulcan-Hart ML-52918 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)