English dropdown-ico

Manual Delta Electronics S48SS

12 pages 0.31 mb
Download

Go to site of 12

Summary
  • Delta Electronics S48SS - page 1

    Evaluation Procedure Delt a Delphi Series 48V in S48SR and S48SS The Delphi Series S48SR and S48SS, 48V input, single output, isolated DC/DC converters are the la test offering from one of the world’ s largest power supply manufacturers ― Delta Electronics, Inc. With creative design technology and optimization of component placement , these con ...

  • Delta Electronics S48SS - page 2

    2 3.0 Equipment Required 3.1 (1) 0 ~ 80 V @ 0 ~10 A Power S upply (Chroma 6230K-80 or Equivalent) 3.2 (1) 4 Channel 150 MHz O scilloscope, (1) 1× scope pr obe, (1) 10× scope probe (Y okogama DL 1540C or Equivalent) 3.3 (1) 4 1/2 Digital Multimeter (DVM3) (HP34401A or Equivalent) 3.4 (2) 3 1/2 Digital Multimeter (D VM1 and DVM2) (FLUKE 45 or Equiv ...

  • Delta Electronics S48SS - page 3

    3 5.0 Thermal of the Converter It is imperative that sufficient airflow be provided to the conv erter at all times during all portions of testing. Please refer to the app licable data sheet for the proper cooling and derating necessary to achieve accurate results when testing the converter. 6.0 T est s Performed The following tests are performed at ...

  • Delta Electronics S48SS - page 4

    4 7.0 T est Set-Up 7.1 Initial Set-Up 1) Examine the part number of the power module to determi ne of the unit is defined for positive or negative logic enable as follows: S48SS3R304 N R would denote negative logic, while S48SS3R304 P R would denote positive logic (S48SS only). 2) If the power module has posit ive logic, switching SW1 to position H ...

  • Delta Electronics S48SS - page 5

    5 4) The converter may also be turned on by switching SW1 to the appropriate logic enable position and ramping the voltage manual ly or turning on the Power Supply with a preset output voltage (S48SS only). 5) T oggle SW1 to the “OFF” position af ter performing each test (S48SS only). 8.0 T est and Evaluation 8.1 Input Characteristic 8.1.1 Inpu ...

  • Delta Electronics S48SS - page 6

    6 8.1.3 Input Current Module Off (S48SS only) T est 1) Set the enable switch SW1 to the approp riate logic enable pos ition to disable the power supply (as defined in Section 7.1). 2) Adjust the input power supply to the desired operating point of interest while monitoring DVM2. 3) Note the input current from DVM1. 4) This reading is the result of ...

  • Delta Electronics S48SS - page 7

    7 8.2.3 Output Ripple Output Ripple is defined as the periodi c AC component at the DC/DC converters output voltage. The output ripple is measur ed in Peak to Peak and RMS values, both done with a specific bandwidth. T est 1) T urn on the fan. 2) Set the enable switch SW1 to th e appropriate logic enable position. 3) Adjust the input voltage and ou ...

  • Delta Electronics S48SS - page 8

    8 8.3.2 Sof t St art T urn-On T ime Soft S tart T urn-On T ime is defined as the time it takes for the out put to rise to within 95% of its final value from the time when t he converter is enabled. The rise time is deliberately made slower to r educe the inrush current and to eliminate any overshoot in the output voltage. T est -S48SR & S48SS ( ...

  • Delta Electronics S48SS - page 9

    Note: Different electronic loads may have dr amatically dif ferent results because of their input characteristics during T urn-On. If the T urn-On appears abnormal, replace with an actual resistive load of appropriate value. The Soft S tart T urn-On T ime of the conv erter provided in the Evaluation Kit was measured with the Electronic Load set at ...

  • Delta Electronics S48SS - page 10

    7) Use the following formulas to calculate the efficiency: Efficiency= (Pout/Pin) × 100(%) Pin = Iin × V in Pout = Iout × V out The following graph shows the effici ency result s of the S48SS/S48SR converters measured at different operating point s. 50 55 60 65 70 75 80 85 90 0.5 1 1. 5 2 2.5 3 3. 5 4 4.5 O UTP UT CURRENT (A ) E FFICI E NCY (%) ...

  • Delta Electronics S48SS - page 11

    Appendix B - Evaluation Board Layout (T op View) 11 ...

  • Delta Electronics S48SS - page 12

    12 Appendix C- Evaluation Board Layout (Bottom View) CONTACT DATA: www. de lta ww.c om USA: Telephone: East Coast: (888) 335 8201 West Coast: (888) 335 8208 Fax: (978) 656 3964 Email: DCDC@delta-corp.com Europe: Telephone: France: +33 1 6485 1212 Germany: +49 89 370 62 897 UK: +44 777 195 6299 Fax: +33 1 6485 1212 Email: DCDC@euro.delta-c orp.com A ...

Manufacturer Delta Electronics Category Power Supply

Documents that we receive from a manufacturer of a Delta Electronics S48SS can be divided into several groups. They are, among others:
- Delta Electronics technical drawings
- S48SS manuals
- Delta Electronics product data sheets
- information booklets
- or energy labels Delta Electronics S48SS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Delta Electronics S48SS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Delta Electronics S48SS, service manual, brief instructions and user manuals Delta Electronics S48SS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Delta Electronics S48SS.

Similar manuals

A complete manual for the device Delta Electronics S48SS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Delta Electronics S48SS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Delta Electronics S48SS.

A complete Delta Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Delta Electronics S48SS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Delta Electronics S48SS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Delta Electronics S48SS, that we can find in the current document
3. Tips how to use the basic functions of the device Delta Electronics S48SS - which should help us in our first steps of using Delta Electronics S48SS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Delta Electronics S48SS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Delta Electronics S48SS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Delta Electronics S48SS?

Use the form below

If you did not solve your problem by using a manual Delta Electronics S48SS, ask a question using the form below. If a user had a similar problem with Delta Electronics S48SS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)