English dropdown-ico

Manual SMC Networks BR14VPN

73 pages 1.38 mb
Download

Go to site of 73

Summary
  • SMC Networks BR14VPN - page 1

    i ...

  • SMC Networks BR14VPN - page 2

    Copyright Information furnished by SMC Networks, Inc. (S MC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which ma y result from its use. No license is granted by implication or otherwise under any patent or patent rights of S ...

  • SMC Networks BR14VPN - page 3

    Compliances FCC - Class B This equipment has been tested and found to co mply with the l imits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. Thes e limits are designed to provide reasonable protection against harmfu l interfer ence in a residential installation. This equipment generates, uses and can radiate radi o frequenc y ...

  • SMC Networks BR14VPN - page 4

    EC Conformance Declaration – Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II Calle Fructuos Gelabert 6-8, 2o, 4a 08970 – Sant Joan D espi Barcelona, Spain This equipment complies with the requirements relating to electromagn etic compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the ess ...

  • SMC Networks BR14VPN - page 5

    1 | SYSTEM REQUIREMENTS 1 2 | EQUIPMENT CHECKLIST 1 3 | FUNCTIONS AND FEATURES 2 4 | PANEL LAYOUT 3 5 | HARDWARE INSTALLATION 4 6 | NETWORK SETTINGS AND SOFTWARE INSTALLATION 4 6.1 | Instal ling TCP/IP 5 6.2 | Setting u p TCP/IP 5 6.3 | Obtainin g an IP Address 6 6.4 | Config uring a Macintosh Computer 7 6.5 | Verifying Your TCP/IP Co nnection 7 7 ...

  • SMC Networks BR14VPN - page 6

    7.9 | Advanced S etup - VPN 33 7.9.1 | IPSec Tunnel 33 7.9.2 | IKE Proposal 35 7.9.3 | IPSec Proposal 36 7.9.4 | Dynamic VPN 38 7.9.5 | PPTP/L2TP Server 39 7.10 | Advanced Setu p - SNMP 40 7.11 | Advanced Setup - ROUTING 41 7.12 | Advanced Setup - MISCELLANEOUS 42 7.13 | Advanced Setup – DISPLAY STATUS 43 7.14 | DDNS (Dynami c DNS) 43 7.15 | UPnP ...

  • SMC Networks BR14VPN - page 7

    1 | System Requirements • Internet access from your local telephone compan y or Internet Service Provider (ISP) using a DSL modem, cable mode m, Dial-Up modem, or ISDN modem • A PC using a fixed IP address or dynamic IP address assigned via DHCP, as well as a Gateway server address a nd DNS server address from your servi ce pro vider • A comp ...

  • SMC Networks BR14VPN - page 8

    3 | Functions and Features Broadband Modem and NAT Router Connects multiple computers to a broadband (cable or DSL) modem, and/or Ethernet router to access the Internet. 10/100 Mbps Ethernet Interface Provides a 10/100 Base-TX in terface to connect to a DSL or cable modem for broadband Internet access. Auto-sensing Ethernet Switch Equipped with a 4 ...

  • SMC Networks BR14VPN - page 9

    4 | Panel Layout The following figure shows the front panel layout, which is followed by a table describin g in detail the status and function of each LED. SMCBR14VPN Front Panel SMCBR18VPN Front Panel LED Function Color Status Descripti on Power Power indicator Green Steady Power is being applied to this device M1 System status indicator Orange Bl ...

  • SMC Networks BR14VPN - page 10

    SMCBR18VPN Front Panel: 8 LAN, 1 WAN, and 1 COM port Port Type Description 5 VDC Receptor for power adapter: 5 VDC, 2 A (minimum) WAN This is the connection for the Ethernet cable to the Ethernet port on the cable or D SL modem Port 1–4/8 These are the connections for Ethernet cables to your Ethernet enabled computers COM Serial port (connection ...

  • SMC Networks BR14VPN - page 11

    You must first verify that the TCP/IP communi cation protocol is properly in stalled and the computer is configured to get its IP address via the DHCP Server that is built-into this router. If you have not previous ly installed TCP/IP protocols on your client PCs, refer to the following section. 6.1 | Instal ling TCP/IP Windows 95/98/Me 1. Click St ...

  • SMC Networks BR14VPN - page 12

    into your CDROM drive and check the correct file location, e.g ., D:win98, D:win9x. (if D is the letter of your CD-ROM drive). 9. Windows may prompt you to restart the PC. If so, click the Yes button. If Windows does not prompt you to restart your com puter, do so to insure your setting s. Windows NT 1. From the Windows desktop click Start/Settin ...

  • SMC Networks BR14VPN - page 13

    6.4 | Config uring a Macintosh Computer You may find that the instructions here do not exactly match your screen. This is because these steps and screen shots were creat ed usi ng Mac OS 10.2. Mac OS 7.x and above are all very similar, but may not be identical to Mac OS 10.2. 1. Pull down the Apple Menu. Click System P references and sel ect Networ ...

  • SMC Networks BR14VPN - page 14

    7 | Configuring Your Broadband VPN Router Before you attempt to log into the web-based Admi nistration, please verify the following. 1. Your browser is configured properly (s ee below). 2. Disable any firewall or security software that may be running. 3. Confirm that you have a good link LED wh ere your computer is pl ugged into the Router. If you ...

  • SMC Networks BR14VPN - page 15

    Note that there are two different Web user in terfaces, one for general users and one for the system administrator. To log on as an admini strator, enter the system password (default password is smcadmin ) and click the LOGIN button. If you typed the password correctly, the left panel of the Web user interface changes to the administrator configura ...

  • SMC Networks BR14VPN - page 16

    Cable Modem The cable modem option allows you to confi gure a host name and MAC Address. The Host Name is optional, but may be required by some ISP s. The default MAC address is set to the WAN’s physical interface on the Router. Use this ad dress when registering for Internet service, and do not change it unl ess required by your ISP. If your ISP ...

  • SMC Networks BR14VPN - page 17

    Fixed-IP xD SL Some xDSL Internet Service Providers may assi gn a fixed (static) IP address. If you have been provided with this information, choose this option and enter th e assigned IP address, gateway IP address, DNS IP addresses, and subnet mask. PPPoE xDSL Enter the PPPoE User N ame and Password assi gned by your Service Provid er. The Servic ...

  • SMC Networks BR14VPN - page 18

    PPTP Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can be used to join different physical networks usi ng the Internet as an intermediary. If you have been provid ed with the informati on as s hown on the screen, enter the assigned IP address, subnet mask, default gateway IP address, user ID ...

  • SMC Networks BR14VPN - page 19

    BigPond If you use the BigPond Intern et Service which is available in Australia, enter your username and password and apply the changes. L2TP Layer 2 Tunneling Protocol is a common connection method u sed for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary. If you have been provi ...

  • SMC Networks BR14VPN - page 20

    will be dropped and will automatically re-estab lish the connecti on as soon as you attempt to access the Internet again. Dial-Up Most Dial-up users will select this option to connect to their ISP through an analog dial-up modem. This feature can be used as a back-up when your broad band connectivity is unavailable. Enter the ph one number, account ...

  • SMC Networks BR14VPN - page 21

    15 ...

  • SMC Networks BR14VPN - page 22

    7.4 | Advanced S etup – S YSTEM Time Zone Use the section below to configure the Barricad e 's system time. Select your timezone and configure the daylight savings option based on your location. This information is used for the time/date parental rules you can configure wi th the Barricade's Advanc ed Firewall. This information is also ...

  • SMC Networks BR14VPN - page 23

    Password Setti ngs Use this section to configure the 2 password accou nts and idle time-out setting for your Barricade Router. Ther e are 2 levels of admin access for this VPN Router: The Administrator account has Read/ Write perm ission to view and change any settings. The default password for this account is "smcadmin". The User account ...

  • SMC Networks BR14VPN - page 24

    Syslog Server The Syslog Server tool will automatically dow nload the Barricad e log to the server IP address specified by the u ser. Enter the Serv er LAN IP Address and select the Enable radio button to enable this function. The broadband rout er is also able to send th e log files to a specific email address. Simply ent er the IP addres s of you ...

  • SMC Networks BR14VPN - page 25

    7.5 | Advanced S etup - WAN Dynamic IP The cable modem option allows you to confi gure a host name and MAC Address. The Host Name is optional, but may be required by some ISP s. The default MAC address is set to the WAN’s physical interface on the Router. Use this ad dress when registering for Internet service, and do not change it unl ess requir ...

  • SMC Networks BR14VPN - page 26

    PPPoE Enter the PPPoE User N ame and Password assi gned by your Service Provid er. The Service Name is normally optional, but may be requi red by some s ervice providers. Leave the Maximum Transmission Unit (MTU) at the defaul t value unless you have a particular reason to change it. Enter a Maximum Idle Ti me (in mi nutes) to define a maximu m per ...

  • SMC Networks BR14VPN - page 27

    PPTP Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can be used to join different physical networks usi ng the Internet as an intermediary. If you have been provid ed with the informati on as s hown on the screen, enter the assigned IP address, subnet mask, default gateway IP address, user ID ...

  • SMC Networks BR14VPN - page 28

    BigPond If you use the BigPond Intern et Service which is available in Australia, enter your username and password and apply the changes. L2TP Layer 2 Tunneling Protocol is a common connection method u sed for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary. If you have been provi ...

  • SMC Networks BR14VPN - page 29

    Dial Up Most Dial-up users will select this option to connect to their ISP through an analog dial-up modem. This feature can be used as a back-up when your broad band connectivity is unavailable. Enter the ph one number, account na me and password assigned to you by yo ur ISP. The baud rate is the communicati on ra te between the broadband router a ...

  • SMC Networks BR14VPN - page 30

    7.6 | Advanced S etup - L AN This is the local IP address of the router. All networked comput ers must use the LAN IP address of the router as their d efault Gateway. However, if necessary, it can be changed. Here you can configure the LAN IP address fo r the router and enable/disable the DHCP server for dynamic client addre ss allocation. You can ...

  • SMC Networks BR14VPN - page 31

    You also have the option to configure more ad vanc ed settings by clicking the “More” button. You can configure the router’s DHCP server to give out specific Primary and Second ary DNS, Primary and Secondary W INS, and an alternate Gat eway (in the event that the rout er is not the Internet gateway). Clicking on the “Client List” link bri ...

  • SMC Networks BR14VPN - page 32

    7.7 | Advanced Setup - NAT 7.7.1 | Virtu al Server The firewall of the router filters out unrecogni zed packets to protect your intranet. This means that all network hosts are invisible to th e outside world. However, some of the hosts can be made accessible by enabling th e Virtual Se rver mapping. A virtual server is defined as a Service Port. Al ...

  • SMC Networks BR14VPN - page 33

    For example, if you have an FTP server (port 21 ) at 192.168.123.1, a We b server (port 80) at 192.168.123.2, and a VPN server at 192.168.123.6, you need to specify the f ollowing virtual server mapping as shown in the table below: Service Port Server IP Enable 21 192.168.123.1 X 80 192.168.123.2 X 1723 192.168.123.6 X The “IP Address” section ...

  • SMC Networks BR14VPN - page 34

    For a full list of ports and the services that run on them, see http://www.iana.org/assignments/port-numbers 7.7.3 | Virtu al Computer Use the “Virtual Computer” option to maintain th e privacy and security of the local net work. Virtual Computer enables you to use th e origin al NAT feature, and allows you to setup the one-to-one mapping of mu ...

  • SMC Networks BR14VPN - page 35

    You can select one of the two filtering policies: • Allow all to pass except those that match the specified rules • Deny all to pass except those that match the specif ied rules You can apply up to 8 rules for each direction, inbound or outbound. For each rule you c an define the following: • Source IP address • Source port address • Dest ...

  • SMC Networks BR14VPN - page 36

    7.8.3 | MAC Filter MAC Address Filtering allows you assign differe nt access rights to various users and you can also assign a specific IP address to a certain MAC address. Select the Enable radio button to enable the MA C Address Cont rol. All of the settings on this screen take effect when Enable is ch ecked. • MAC Address: This is the unique a ...

  • SMC Networks BR14VPN - page 37

    7.8.4 | Schedul e Rule Set scheduled times to be used to control what time of day a service or set of services is enabled. Use this section to configure up to 10 Schedule Rules to lim it network access based on time and day. To create a schedule rule click the [Add Schedule Rule ...] link below. Enter a rule name into the text field next to “Name ...

  • SMC Networks BR14VPN - page 38

    The Schedule Rule screen appears. It now shows your setting for Rule 1. If you need to make changes to your setting, click the Edit button. If you want to delete Rule 1, click the Delet e button. 7.8.5 | Advance d In this section you can enable/disable Stateful Packet Inspectio n (SPI), Discard Ping from WAN, and PPTP and IPSec VPN Passthrough type ...

  • SMC Networks BR14VPN - page 39

    7.8.6 | DMZ If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall, then you can open the client up to unrestricted two-way Internet access by defining a Virtual DMZ Host. 7.9 | Advanced S etup - VPN 7.9.1 | IPSe c Tunnel VPN settings are used to create virtual privat e tunnels to remote VPN gate ...

  • SMC Networks BR14VPN - page 40

    • VPN: VPN protects network information from intruders. However, it greatly decreases network throughput. Enable it onl y when a security tu nnel is absolutely necessary. This feature is disabled by default. • Max. Number of Tunnels: Set the number of tunnel s that are allowed to be in operation simultaneously. • Tunnel name: Lists the monito ...

  • SMC Networks BR14VPN - page 41

    Options • Select IKE proposal: Click this button to se tup a set of frequently used IKE p roposals for the dedicated tunnel. • Select IPSec proposal: Click this button to setup a set of frequently used IPSec proposals for the dedicated tunnel. The tunnel name is equal to the name you c onfigured on the p revious page of VPN settings. The IKE pr ...

  • SMC Networks BR14VPN - page 42

    o MD5 • Life Time: The unit of Life time is based on the value of the life time unit, which can be seconds or KB. If the value of the unit is seconds, the value of life time repres ents the life time of the dedicated VPN tunnel bet ween both end gateways. Its value can range from 300 to 172,800 seconds. If the value of the unit is KB, the value o ...

  • SMC Networks BR14VPN - page 43

    • Proposal Name: The proposal name indicates which IPSec proposal will be monitored. The first character of the name with the value of 0x00 stands for the IPSec proposal that is not available. • DH Group - Three groups can be selected: o Group 1 (MODP768) o Group 2 (MODP1024) o Group 5 (MODP1536) However, you can also select None. • Encapsula ...

  • SMC Networks BR14VPN - page 44

    7.9.4 | Dyna mic VPN When using the VPN Dynamic IP Setting, the r outer functions as a Dynamic VPN server. The Dynamic VPN server does not check the VPN client IP information - this means that you can build a VPN tunnel with a VPN gateway from any remote host, regardless of the IP information. 38 ...

  • SMC Networks BR14VPN - page 45

    7.9.5 | PPTP/L2TP Server Point-to-Point and Layer 2 Tunneling Protocol s (PPTP / L2TP) allows the secure remote access over the Internet by simply dialing in a local point provid ed by an ISP. The following screen displays the management interface where you enter username and passwords for authorized remote users, the authentication pr otocol, and ...

  • SMC Networks BR14VPN - page 46

    7.10 | Advanced Setu p - SNMP The Simple Network Management Protocol (S NMP) lets you manage a compu ter network remotely by polling and setting terminal values and monitoring network events. • Enable SNMP: You can check Local, Remote, or both options to enable the SNMP function. o If Local is checked, the router responds only to req uests from t ...

  • SMC Networks BR14VPN - page 47

    7.11 | Advanced Setup - ROUTING The Routing Table lets you determine which phy sical interface address to use for outgoing IP data grams. If you have more than one router and subnet, you will have to enable the rout ing table to allow packets to find the routing path. This allows different subnets to communi cate with each other. The settings in th ...

  • SMC Networks BR14VPN - page 48

    7.12 | Advanced Setup - MISCELLANEOUS If you experience difficulties accessing an FTP server that is running on a port other than 21, you can enter that port in the “Non-standard FTP port” and apply the changes. Wake-on-LAN is a technology that lets you power up a netwo rked router remotely. To use this feature, the target network adapter mu st ...

  • SMC Networks BR14VPN - page 49

    7.13 | Advanced Setup – DISPLAY STATUS Enable the Display Status option to view the W AN connectivity settings on the login page. When this is enabled, the login page appears as follows: 7.14 | DDNS (Dynami c DNS) Dynamic DNS provides users on the Internet a method to tie their domain name(s) to computers or servers. DDNS allows your domain name ...

  • SMC Networks BR14VPN - page 50

    7.15 | UPnP (Universal Plug-and-Pla y) The Universal Plug and Play architecture offers p ervasive pe er-to-peer network connecti vity of PCs of all form factors, intelligent app liances, and wireless devices. UPnP enables seamless proximity networking in addition to control and data transfer among network ed devices in the home, office and everywhe ...

  • SMC Networks BR14VPN - page 51

    7.17 | Status You can use the Status screen to see the connection status for Barricade's WAN/LAN interfaces, firmware and hard ware version numbers, any illega l attempts to access your network, as well as information on all DHCP clie nt PCs currently connected to your network. 45 ...

  • SMC Networks BR14VPN - page 52

    46 ...

  • SMC Networks BR14VPN - page 53

    8 | IPSec Settings Guide (For Reference/Example Only) 8.1 | Tunnel betwee n two SMCBR 14VPN The easiest way to construct a VPN tunnel bet w een two sites is to use two SMCBR14VPNs, which are connected to the intern et. The steps to follow to create an IP tunnel bet ween are the following: • Step 1: Go to the VPN section and select the enabl e che ...

  • SMC Networks BR14VPN - page 54

    Set the VPN settings as follows: VPN: Enable Max. number of tunnels: 2 ID: 1 Tunnel Name: 1 Method: IKE When finished, click “More”. VPN Settings – Tunnel 1 – IKE 48 ...

  • SMC Networks BR14VPN - page 55

    Set the Tunnel 1 IKE settings as follows: Tunnel 1: 1 Local Subnet: 192.168.1.0 Local Netmask: 255.255.255.0 Remote Subnet: 192.168.1.0 Remote Netmask: 255.255.255.0 Remote Gateway: ip2.smc.com Preshare Key: mypresharedkey When finished, save your settings. 8.1.2 | Settings f or router 2 VPN Router 2 WAN IP Address: ip2.smc.com LAN IP Address: 192. ...

  • SMC Networks BR14VPN - page 56

    Set the VPN settings as follows: VPN: Enable Max. number of tunnels: 2 ID: 1 Tunnel Name: 1 Method: IKE When finished, click “More”. VPN Settings – Tunnel 1 – IKE 50 ...

  • SMC Networks BR14VPN - page 57

    Set the Tunnel 1 IKE settings as follows: Tunnel 1: 1 Local Subnet: 192.168.2.0 Local Netmask: 255.255.255.0 Remote Subnet: 192.168.1.0 Remote Netmask: 255.255.255.0 Remote Gateway: ip1.smc.com Preshare Key: mypresharedkey When finished, save your settings. 51 ...

  • SMC Networks BR14VPN - page 58

    8.1 3 | Common Sett ngs for both rout ers . i VPN Settings – Tunnel 1 – Set IKE Proposal Set the Tunnel 1 IKE Prop osal settings as follows: ID: 1 Proposal Name: 1 DH Group: Group2 Encypt. algorithm: 3DES Auth. algorithm: SHA1 Life Time: 10000 Life Time Unit: Sec. When finished, save the settings. 52 ...

  • SMC Networks BR14VPN - page 59

    VPN Settings – Tunnel 1 – Set IPSec Proposal Set the Tunnel 1 IPSec Proposal settings as follows: ID: 1 Proposal Name: 1 DH Group: Group2 Encap. protocol: ESP Encrypt. algorithm: DES Auth. Algorithm: MD5 Life Time: 10000 Life Time Unit: Sec. When finished, save the settings. Now to view the VPN connection proc ess, go to the STATUS page and vie ...

  • SMC Networks BR14VPN - page 60

    8.3 | PPTP/ L2TP configuratio n example Pease note that the virtual address of th e L2TP and PPTP server have to be different. PPTP • Step 1: Go to the PPTP Server s ecti on and select the Enable radi o button • Step 2: Change the virtual IP value if ne cessary (thi s is the IP network that your PPTP clients will automatically be connected to) ...

  • SMC Networks BR14VPN - page 61

    55 55 ...

  • SMC Networks BR14VPN - page 62

    9 | Troubleshooting A. Verifying your connection to the router If you are unable to access the Router’s we b-bas ed administration pages, then you may not be properly connected or configured. To determine your TCP/IP configuration status please follow the steps below: 1. Click Start then choose Run. 2. Type cmd or command to open a DOS prompt. 3. ...

  • SMC Networks BR14VPN - page 63

    F. I am having problem s establish ing a PPPoE xDSL WAN connecti on Some ISP’s require you to enter the domain name in addition to your username and password. For instance, for SBC Global, enter username@sbcglo bal.net. For Ameritech users, enter username@a meritech.net. BellSouth users may need to enter username@b ellsouth.net and Mindspring sub ...

  • SMC Networks BR14VPN - page 64

    J. I forgot my password and can no longer log into the ro uter. You should restore your router to factory defaults via its hard ware reset button. Locate the reset button (to the right of the power input). While the device is powered on, use a paper clip to depress this button for about 5-7 sec onds and then release. Now you have completed the rese ...

  • SMC Networks BR14VPN - page 65

    Microsoft uses an embedded L2TP/IPSEC VPN im plementation . In order to use the Microsoft standard VPN client, one has to disable the IP SEC on the PC. Please refer to Microsoft help to perform this operation. 9.1 | Questions and Awnsers What is the difference between SMCBR14VPN and SMCBR 18VPN? The SMCBR14VPN has 4 LAN ports and the SMCBR18VPN HAS ...

  • SMC Networks BR14VPN - page 66

    10 | Technical Specifications Standards: IEEE 802.3 10Base-T Eth ernet IEEE 802.3u 100Base-TX Fast Ethernet Hardware / Ports: LAN Port 4x RJ45, 10/100 Mbps with Auto-MDI/ MDIX (BR14VPN) 8x RJ45, 10/100 Mbps with Auto-MDI/ MDIX (BR18VPN) WAN Port 1x RJ45, 10/100 Mbps with Auto-MDI/ MDIX COM Port 1x DB9 (male), Up to 115200bps Input Power DC 5V2A LED ...

  • SMC Networks BR14VPN - page 67

    Dynamic IP L2TP PPTP BigPond Static IP Input Power: 5V 2A Operating Temperature: 0~40 o C Humidity: 10%~90% non-condensing Compliances: FCC CE VCCI UL 61 ...

  • SMC Networks BR14VPN - page 68

    11 | Terminology 10BaseT - Physical Layer Specification for Twiste d- Pair Ethernet using Unshielded Twisted Pair wire at 10Mbps. This is the most popular ty pe of LAN cable used today because it is very cheap and easy to install. It uses RJ-45 conne ctors and has a cable length span of up to 100 meters. There ar e two versions , STP (Shielded Twis ...

  • SMC Networks BR14VPN - page 69

    DES - Data Encryption Standard. A cryptographic encryption al gorithm that is part of many standards. DHCP - Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network. DMZ - Allows a networked computer to be fully ex posed to the Intern et. This function is used when the s ...

  • SMC Networks BR14VPN - page 70

    ISAKMP - Internet Securit y Association and Key Manangement Protocol. The basis for IKE. ISP - Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other busin esses or organizations. JPEG – Joint Photographic Exp erts Group. JPEG is a standard for compressing still images and it provides ...

  • SMC Networks BR14VPN - page 71

    NAT – (Network Address Translation) This process allows all of the computers on your ho me network to use one IP address. The N AT capabilit y of the Barricade, allows you to access the Internet from any comp uter on your home networ k without having to purchase more IP addresses from your ISP. Netw ork Address Translation can be used to give mul ...

  • SMC Networks BR14VPN - page 72

    TCP/IP - Transmission Control Protocol/Internet Protocol. This is the standard protocol for data transmission over the Intern et. TCP - Transmission Control Protocol - TCP and UDP (User Datagram Protocol) are th e two transport protocols in TCP/IP. TCP ensures that a message is sent accurately and in its entirety. However, for re al-time voice and ...

  • SMC Networks BR14VPN - page 73

    67 ...

Manufacturer SMC Networks Category Network Router

Documents that we receive from a manufacturer of a SMC Networks BR14VPN can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- BR14VPN manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks BR14VPN
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks BR14VPN.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks BR14VPN, service manual, brief instructions and user manuals SMC Networks BR14VPN. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks BR14VPN.

Similar manuals

A complete manual for the device SMC Networks BR14VPN, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks BR14VPN by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks BR14VPN.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks BR14VPN - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks BR14VPN, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks BR14VPN, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks BR14VPN - which should help us in our first steps of using SMC Networks BR14VPN
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks BR14VPN
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks BR14VPN in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks BR14VPN?

Use the form below

If you did not solve your problem by using a manual SMC Networks BR14VPN, ask a question using the form below. If a user had a similar problem with SMC Networks BR14VPN it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)