English dropdown-ico

Manual Shindaiwa T230

20 pages 1.34 mb
Download

Go to site of 20

Summary
  • Shindaiwa T230 - page 1

    SHIND AIWA OWNER’S/OPERA T OR’S MANU AL Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection when operating this unit. WARNING! MUL TIPURPOSE POLE PR UNER A TT A CHMENT 78701 F or Models T230, T231, AH230, AH231, PB230 X7502890802 01/1 1 ...

  • Shindaiwa T230 - page 2

    2 NOTE: A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier. Introduction The Shindaiwa P ole Pruner Attachmen t is designed and built to deliver superior per formance and reliability without compromise to quality , comfort, safety or durability . As an owner/operat or , you'll so ...

  • Shindaiwa T230 - page 3

    3 CA UTION!  Always maintain the Pole Pruner T ool according to this owner ’s manual and follow the recommended scheduled maintenance.  Never modify or disable any of the pruner ’s safety devices.  Always use genuine Shindaiwa parts and accessories when repairing or maintaining this machine.  Do not make unauthorized modications ...

  • Shindaiwa T230 - page 4

    4 Always operat e with both hands rmly gripping the machine. W ear nonslip heavy-dut y work gloves to impr ove your grip on the pole pruner handle. Wear snug-tting clothes that also permit freedom of movement. NEVER wear shorts! Always wear a har d hat to reduce the risk of head injuries during operation of this machine. Always wear ey e and ...

  • Shindaiwa T230 - page 5

    5 Safety Labels IMPORT ANT! Safety and Information Labels: Make sure all safety and information labels are undamaged, readable and up to date. Immediately replace damaged or missing labels. This Attachment comes with safety labels shipped loose in the box. Attach these safety labels. New labels are available through your local authorized Shindaiwa ...

  • Shindaiwa T230 - page 6

    6 1. Place the T230 or PB230 on a clean at sur face, in an upright position. 2. Remove the cylinder cover as instructed in your unit owner's manual . 3. Loosen the inner throttle cable adjusting nut with a 10 mm wrench. 4. Lift the throttle cable housing out of the notch on the powerhead . 5. Remove the throttle cable fr om the car - bureto ...

  • Shindaiwa T230 - page 7

    7 ■ T o avoid serious injury , grip the outer tube securely with one hand and cut away from that hand when slitting the rubber throttle grip. WARNING! 1. P lace the T230 or PB230 outer tube assembly on a clean, at sur face. 2. L oosen the three screws (A) tha t hold the throttle trigger assembly to the outer tube. 3. Slide the trigger assembly ...

  • Shindaiwa T230 - page 8

    8 Reconnecting the Thr ottle Cable, Switch Wires Connect The Throttle Cable. 1. Loop the ribbed cable assembly to the top left side of the engine. Conrm that the black ground wire ( A) (with an eyelet on the end) is locat ed between the two cable adjuster nuts (B). 2. C onnect the Z-shaped end of the throttle cable ( C) to the throttle lever on ...

  • Shindaiwa T230 - page 9

    9 1/4” F 3. W hen 1/4-inch of free play is achieved , securely tighten the two 10mm throttle cable nuts. When the throttle cable is correctly adjusted, and the throttle trigger is fully depressed (full throttle), the thr ottle will contact the stop on the throttle body (F). NOTE: Apply anti-seize oil on the cylinder cover knob threads for easier ...

  • Shindaiwa T230 - page 10

    10 1. Clean out er tube so the labels will adhere properly . 2. P eel the back ing o the multiple warning label and attach below similar label on lower part of outer tube. Make sure label faces up and that it is leg ible from the operator's position. 3. Peel the backing o "The Electrical Shock Danger" label and attach it just a ...

  • Shindaiwa T230 - page 11

    11 Installing and Adjusting the Bar and Chain Installing The Chain WARNING! Never attempt to install, replace, or adjust the chain with the engine running. WARNING! The saw chain is very sharp. Wear gloves to protect your hands when handling. NOTE: For the longest chain life, let new or replacement chain loops soak in oil overnight before installat ...

  • Shindaiwa T230 - page 12

    12 WARNING! Never attempt to install, replace, or adjust the chain with the engine running. WARNING! The saw chain is very sharp. Wear gloves to protect your hands when handling. CA UTION! A loose chain can jump off the guide bar causing damage to the chain and associated equipment. Always make sure the chain is properly adjusted; check more often ...

  • Shindaiwa T230 - page 13

    13 Adjust the pump as follo ws: 1. S top the engine and make sure the stop switch is in the OFF position. 2. P lace the unit on its side with the oil reservoir (D) up. 3. Using a screwdriv er , turn the oil ow rate adjustment screw (E) in the desired dir ection:  •clockwise – decreaselubrication.  •counterclockwise–incr ...

  • Shindaiwa T230 - page 14

    14 Flush-cutting Thick Branches: If branch diameter is more than 10 cm, rst perform undercut (3) and cross-cut at a distance (A) of about 25 cm fr om the nal cut. Then carr y-out the ush- cut (4), star t- ing with a relieving cut and nishing with a cross-cut. Relieving Cut: T o avoid tearing the bark, k ickback or pinching the bar when ...

  • Shindaiwa T230 - page 15

    15 WARNING! Before performing any maintenance, repair , or cleaning work on the unit, make sure the engine and cutting attachment are completely stopped. Disconnect the spark plug wire before performing service or mainte- nance work. IMPORT ANT! For detailed maintenance information about your T230/231, AH230/231, or PB230 , consult the owner's ...

  • Shindaiwa T230 - page 16

    16 Shar pening the Chain ■ When the cutting edges of the blade become dull, they can be r e -sharpened with a few strokes of a le . ■ In order to keep the blade in balance, all cutting edges must be sharpened equally . ■ In addition, inspect the chain for correct adjustment (more frequently with a new chain). The chain should feel snug but ...

  • Shindaiwa T230 - page 17

    17 ADDITIONAL PROBLEMS Symptom Possible Cause Remedy T r oubleshooting Guide Engine idle too high. Broken clutch spring or worn clutch spring boss. W arped or damaged attachment. Loose gearcase . Cutting attachment moves at engine idle. Excessive vibration. Cutting attachment will not move. Adjust idle. Check Speci cations page for correct idle ...

  • Shindaiwa T230 - page 18

    18 NO TES ...

  • Shindaiwa T230 - page 19

    19 NO TES ...

  • Shindaiwa T230 - page 20

    ECHO Incorporated. 400 Oakwood Road Lake Zurich, IL 60047-1564 U.S.A. T elephone: 1-877-986-7783 Fax: 1-847-540-8416 www .shindaiwa.com Y amabiko Corporation 7-2 Suehirocho 1-Chome, Ohme, T okyo, 198-8760, Japan Phone: 81-428-32-61 18 Fax: 81-428-32-6145 Ser vicing Infor ma tion Par ts/Serial Number Genuine Shindaiwa Parts and Assemblies for your S ...

Manufacturer Shindaiwa Category Pole Saw

Documents that we receive from a manufacturer of a Shindaiwa T230 can be divided into several groups. They are, among others:
- Shindaiwa technical drawings
- T230 manuals
- Shindaiwa product data sheets
- information booklets
- or energy labels Shindaiwa T230
All of them are important, but the most important information from the point of view of use of the device are in the user manual Shindaiwa T230.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Shindaiwa T230, service manual, brief instructions and user manuals Shindaiwa T230. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Shindaiwa T230.

Similar manuals

A complete manual for the device Shindaiwa T230, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Shindaiwa T230 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Shindaiwa T230.

A complete Shindaiwa manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Shindaiwa T230 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Shindaiwa T230, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Shindaiwa T230, that we can find in the current document
3. Tips how to use the basic functions of the device Shindaiwa T230 - which should help us in our first steps of using Shindaiwa T230
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Shindaiwa T230
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Shindaiwa T230 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Shindaiwa T230?

Use the form below

If you did not solve your problem by using a manual Shindaiwa T230, ask a question using the form below. If a user had a similar problem with Shindaiwa T230 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)