Manual Turbo Air MSR-72G-3

16 pages 0.18 mb
Download

Go to site of 16

Summary
  • Turbo Air MSR-72G-3 - page 1

    T urbo air Speeds Up the P ace of Inno vation Refrigerator Freezer Installation and Operation Manual Please read this manual completely before attempting to install or operate this equipment! <Solid Door> Refrigerator MSR-23NM MSR-49NM Freezer MSF-23NM MSF-49NM <Glass Door> Refrigerator MSR-23G-1 MSR-49G-2 MSR-72G-3 CA UTION! PLEASE KEE ...

  • Turbo Air MSR-72G-3 - page 2

    1. SPECIFICATION .......................................................................................... 2 2. SERIAL NUMBER ........................................................................................ 2 3. INSTALLATION ............................................................................................ 3 4. CLEANING ......... ...

  • Turbo Air MSR-72G-3 - page 3

    3 Turbo air 1. GOOD AIR CIRCULA TION - Be sure to avoid any partition and object which may stop the air flow. - Be sure that air space is allowed to flow the rear of the unit. Turbo air recommends that the rear of the unit would be no less than 5 inches from the wall. 2. PLA CE ON STR ONG GROUND - Be sure that the location be chosen has a strong en ...

  • Turbo Air MSR-72G-3 - page 4

    4 Turbo air CLEANING 1. CLEANING ST AINLESS STEEL INTERIOR AND EXTERIOR (select models) : Damage to stainless steel finish due to improper use of cleaning products or non- recommended products is NOT covered under this product's warranty. • DO NOT USE - Abrasive or harsh cleaners - Ammonia - Chlorine bleach - Concentrated detergents or solve ...

  • Turbo Air MSR-72G-3 - page 5

    5 Turbo air B ASIC OPERA TION MSR-23NM MSR-23G-1 MSR-49NM MSR-49G-2 MSR-72G-3 1. Plug in and turn on the power switch located on the bottom of the top grille right side. The Display panel will be lighted and make a beep sound. The compressor will begin to run. 2. The default temperature setting is No. “5”. 3. The compressor is automatically cyc ...

  • Turbo Air MSR-72G-3 - page 6

    6 Turbo air DISPLA Y P ANEL OF REFRIGERA T OR 9 TEMPERA TURE Q .C. 8 7 6 5 4 3 2 1 FA N DOOR QUICK COOLING TEMPERA TURE ˚F TEMP . SETTING QUICK COOLING F AN RUNNING DOOR OPENING QUICK COOLING BUTTON TEMP . CONTROL BUTTON (SEE T O P AGE 7) INNER TEMP . (SEE T O P AGE 8) (SEE T O P AGE 7) ...

  • Turbo Air MSR-72G-3 - page 7

    7 Turbo air 1. If you push the Q.C. (QUICK Cooling) button, the compressor will run continuously until D-Senser detect 14 ˚ F (-10 ˚ C) to bring down the temperature more quickly. (max.comp.run time = 120 min.) 2. If you push the Q.C. button again during QUICK Cooling mode, the compressor will return to the normal operation. 3. During the QUICK C ...

  • Turbo Air MSR-72G-3 - page 8

    8 Turbo air 1. It displays the inside temperature. 2. Display range is 14 ˚ F to 69 ˚ F (-10 ˚ C ~ +20 ˚ C). 3. When the inside temperature is lower than 14 ˚ F, the panel will display ‘ ’. and, higher than 69 ˚ F, the panel will display ‘ ’. 1. If the fan motor is running, fan running indicator will be turned on. 2. Evaporator fan mo ...

  • Turbo Air MSR-72G-3 - page 9

    9 Turbo air B ASIC OPERA TION 1. Plug in and turn on the power switch located on the bottom of the top grille right side. The Display panel will be lighted and make a beep sound. The compressor will begin to run. 2. The default temperature setting is No. “5”. 3. The compressor is automatically cycled by the electronic controller (PCB, F-Sensor) ...

  • Turbo Air MSR-72G-3 - page 10

    10 Turbo air DISPLA Y P ANEL OF FREEZER 9 TEMPERA TURE D.F . 8 7 6 5 4 3 2 1 FA N DOOR MANU AL DEFROST TEMPERA TURE ˚F TEMP . SETTING MANUAL DEFROST F AN RUNNING DOOR OPENING MANUAL DEFROST BUTTON TEMP . CONTROL BUTTON (SEE T O P AGE 1 1) INNER TEMP . (SEE T O P AGE 12) (SEE T O P AGE 1 1) ...

  • Turbo Air MSR-72G-3 - page 11

    11 Turbo air 1. If you push MANUAL DEFROST button for 5 seconds, the Defrost will start. 2. During the Manual Defrost mode, the Up/Down button for the temperature control can not make the compressor cycle ON or OFF. 3. If you want to change the Manual Defrost mode to the normal mode, push MANUAL DEFROST button for 5 seconds. 1. By pushing the up/do ...

  • Turbo Air MSR-72G-3 - page 12

    12 Turbo air 1. It displays inside temperature. 2. Display range is -50 ˚ F to 50 ˚ F (-45 ˚ C ~ +10 ˚ C). 3. When inside temperature is lower than -50 ˚ F, the panel will display ‘ ’. and, higher than +50 ˚ F, the panel will show ‘ ’. 1. If the fan motor is running, fan running indicator will be turned on. 2. Evaporator fan motor is ...

  • Turbo Air MSR-72G-3 - page 13

    13 Turbo air BEFORE REQUESTING SER VICE SYMPT OMS CA USES SOLUTIONS Freezer is melting f ood. The unit does not refrigerate at all. The unit does not refrigerate well. There is a loud noise. There are dew-dr ops on the unit exterior . There are dew-dr ops on the unit interior . The door does not c lose tightly . • The controller is set too high t ...

  • Turbo Air MSR-72G-3 - page 14

    14 Turbo air MANUF A CTURING COMP ANY Turbo air warrants to the original purchaser of every new-Turbo air refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal use and service, for a period of one (1) year from the date of original installation or 15 months after shipment date from Tu ...

  • Turbo Air MSR-72G-3 - page 15

    15 Turbo air WHA T IS NO T CO VERED BY THIS W ARRANTY Turbo air’s obligation under warranty is limited to either repair or replacement of parts, subject to the additional limitation s below. This warranty neither assumes nor authorizes any person to assume obligations other than expressly covered by this warranty. 1. WARRANTY IS NOT TRANSFERABLE. ...

  • Turbo Air MSR-72G-3 - page 16

    Warranty Claims... All claims for parts or labor must be made directly thorough Turbo Air. All claims should include: model number of the unit, the serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting the alleged defect. In case of compressor replacement under warranty, either compressor or ...

Manufacturer Turbo Air Category Refrigerator

Documents that we receive from a manufacturer of a Turbo Air MSR-72G-3 can be divided into several groups. They are, among others:
- Turbo Air technical drawings
- MSR-72G-3 manuals
- Turbo Air product data sheets
- information booklets
- or energy labels Turbo Air MSR-72G-3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Turbo Air MSR-72G-3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Turbo Air MSR-72G-3, service manual, brief instructions and user manuals Turbo Air MSR-72G-3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Turbo Air MSR-72G-3.

Similar manuals

A complete manual for the device Turbo Air MSR-72G-3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Turbo Air MSR-72G-3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Turbo Air MSR-72G-3.

A complete Turbo Air manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Turbo Air MSR-72G-3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Turbo Air MSR-72G-3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Turbo Air MSR-72G-3, that we can find in the current document
3. Tips how to use the basic functions of the device Turbo Air MSR-72G-3 - which should help us in our first steps of using Turbo Air MSR-72G-3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Turbo Air MSR-72G-3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Turbo Air MSR-72G-3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Turbo Air MSR-72G-3?

Use the form below

If you did not solve your problem by using a manual Turbo Air MSR-72G-3, ask a question using the form below. If a user had a similar problem with Turbo Air MSR-72G-3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)