-
Stanley Black & Decker BR87 - page 1
© 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 65778 7/2014 V er . 1 1 USER MANUAL Safety , Operation and Maintenance BR87 HYDRAULIC BREAKER ...
-
Stanley Black & Decker BR87 - page 2
2 ► BR87 User Manual DECLARA TION OF CONFORMITY DECLARATION OF CONF ORMI TY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONFOR MITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFORM ITA Hydraulic Tools _______ ___________ _________ ___________ _________ ___________ ___________ _ I, the undersigned: Ich, der Unterzeichnende: Je soussi gn? ...
-
Stanley Black & Decker BR87 - page 3
BR87 User Manual ◄ 3 DECLARA TION OF CONFORMITY .......................................................................................................................... 2 SAFETY SYMBOLS .................................................................................................................................................. 4 SAFETY PREC ...
-
Stanley Black & Decker BR87 - page 4
4 ► BR87 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel. Safety symbols and signal words, as shown below , are used to emphas ...
-
Stanley Black & Decker BR87 - page 5
BR87 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety . Re- view them carefully before operating the tool and before performing general maintenance or repairs. ...
-
Stanley Black & Decker BR87 - page 6
6 ► BR87 User Manual • Check fastener tightness often and before each use daily . • Never operate the tool if you cannot be sure that underground utilities are not present. • Do not wear loose tting clothing when operating the tool. • W arning: Hydraulic uid under pressure could cause skin injection injury . If you are injured by hy ...
-
Stanley Black & Decker BR87 - page 7
BR87 User Manual ◄ 7 The safety tag (P/N 15875) at right is attached to the tool when shipped from the factory . Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use. 28322 CE Decal 1 1207 Circuit T ype C Decal SAFETY T AG P/N 15875 (Shown smaller t ...
-
Stanley Black & Decker BR87 - page 8
8 ► BR87 User Manual The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools. They are: Certied non-conductive — constructed of thermoplastic ...
-
Stanley Black & Decker BR87 - page 9
BR87 User Manual ◄ 9 Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bucket T rucks 4-9 15-34 up to 10 up to 3 3/8 10 Both 2250 155 Conductive Hose - Wire Braid or Fiber Braid -DO NOT USE NEAR ELECTRICAL CONDUCT ORS 4-6 1 ...
-
Stanley Black & Decker BR87 - page 10
10 ► BR87 User Manual Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity to limit max. uid temp ...
-
Stanley Black & Decker BR87 - page 11
BR87 User Manual ◄ 1 1 NOTE: Partially depressing the trigger allows the tool to run at slow speed. Slow-speed operation permits easier starting of the tool bit into the work surface. 5. T o start, break an opening (hole) in the center of the surface. After making a hole, break portions of the material into the original opening. For best produc- ...
-
Stanley Black & Decker BR87 - page 12
12 ► BR87 User Manual • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couples and cause overheating of the hy- draulic system. • Always store the tool in a cl ...
-
Stanley Black & Decker BR87 - page 13
BR87 User Manual ◄ 13 PROBLEM CAUSE REMEDY T ool does not run. Power unit not functioning. Check power unit for proper ow and pressure (7–9 gpm/26–34 lpm, 1500-2000 psi/105–140 bar . Couplers or hoses blocked. Remove restriction. Pressure and return line hoses reversed at ports. Be sure hoses are connected to their proper ports. Mechanic ...
-
Stanley Black & Decker BR87 - page 14
14 ► BR87 User Manual ACCUMULA TOR TESTING PROCEDURE T o check or charge the accumulator the following equip - ment is required: 31254 Charge Kit: which includes the following. • Accumulator T ester (Part Number 02835) • Charging Assembly (P/N 15304) (P/N 15304 includes a liquid lled gauge with snub valve, hose and ttings.) • NITROGEN ...
-
Stanley Black & Decker BR87 - page 15
BR87 User Manual ◄ 15 UNDERW A TER MODEL PREVENT A TIVE MAINTENANCE After each use, the movable portions of the tool that were exposed to water should be ushed with a water displacing oil such as WD40™. Remove any remaining water and debris as follows: 1. Turn the tool upside down (without the tool bit) and spray oil through the drive hex an ...
-
Stanley Black & Decker BR87 - page 16
16 ► BR87 User Manual Pressure Range.............................................................................................................. 1500–2000 psi/105–140 bar Flow Range ............................................................................................................................... 7–9 gpm / 26–34 lpm Nominal ...
-
Stanley Black & Decker BR87 - page 17
BR87 User Manual ◄ 17 ACCESSORIES 1-1/8 IN. HEX × 6 IN. SHANK Moil Point, 14 in. Long UC ................................................................................................................................. 02333 Chisel Point, 14 in. Long UC ............................................................................................. ...
-
Stanley Black & Decker BR87 - page 18
18 ► BR87 User Manual BR87 P ARTS ILLUSTRA TION ...
-
Stanley Black & Decker BR87 - page 19
BR87 User Manual ◄ 19 BR87 P ARTS ILLUSTRA TION ...
-
Stanley Black & Decker BR87 - page 20
20 ► BR87 User Manual Item No. Part No. Qty Description 1 06185 1 HANDLE ASSY (INCL ITEM 35) 1 1435 1 BREAKER HANDLE (TRIGGER LOCK MODELS ONL Y) 2 04050 1 V AL VE CAP ASSY 3 04051 1 CHARGING V AL VE 4 04052 1 O-RING 5 04053 1 1434 1 TRIGGER TRIGGER (TRIGGER LOCK MODELS ONL Y) 6 00844 1 SPIROL PIN 7 04054 3 O-RING 8 22891 2 SPIROL PIN, 3/16 × 1-5 ...
-
Stanley Black & Decker BR87 - page 21
BR87 User Manual ◄ 21 For underwater hydraulic tools the applications are broken down into four quadrants depending on type of tool and method of operation. The types of tools are percussive and rotational, each with different characteristics allowing for dif- ferent depth operation. With percussive tools, the nitrogen accumulator PSI must counte ...
-
Stanley Black & Decker BR87 - page 22
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com ...
У вас вопрос, касающийся Stanley Black & Decker BR87?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Stanley Black & Decker BR87, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Stanley Black & Decker BR87 со всей вероятностью он захочет поделиться методом ее решения.