Bedienungsanleitung Tripp Lite SmartPro

13 Seiten Betrifft nicht
Download

Zur Seite of 13

Summary
  • Tripp Lite SmartPro - page 1

    Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Mounting 3 Quic k Installation 5 Basic Operation 7 Storage and Service 11 Español Copyright ©2004 T ripp Lite. All rights reserved. SmartPro ® is a registered trademark of T ripp Lite. Smar tPr o ? ...

  • Tripp Lite SmartPro - page 2

    2 Impor tant Safety Instructions SA VE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all T ripp Lite UPS Systems. Failure to heed these warnings will void your warranty . UPS Location W arnings • Use caution when lifting your UPS. Because of the considerabl ...

  • Tripp Lite SmartPro - page 3

    3 Mounting (Rac k) Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures des ...

  • Tripp Lite SmartPro - page 4

    Mounting (Rac k) continued 2-P ost (T elecom) Mounting Mount 1U UPS models in 2-post racks with user-supplied hardware following the procedure below . If you mount 2U UPS models in 2-post racks, they require the addition of a T ripp Lite 2-Post Rackmount Installation Kit (model: 2POSTRMKIT , sold separately). See Installation Kit owner ’ s manual ...

  • Tripp Lite SmartPro - page 5

    5 Quic k Installation Unplug computer’ s power cord from both A C outlet and computer’ s A C input. Insert the female plug of com- puter’ s cord into UPS’ s AC input. Insert the male plug of computer’ s cord into A C outlet.* NOTE! after you plug the UPS into a live AC outlet, the UPS (in “S tandby” mode) will automatically charge its ...

  • Tripp Lite SmartPro - page 6

    Optional Installation These connections are optional. Y our UPS will function properly without these connections. Note: SMX3000XLR T2U shown in all diagrams. USB and RS-232 Serial Communications (all models) Use the included USB cable (see ) and/or DB9 serial cable (see ) to connect the communication port on your computer to the communication port ...

  • Tripp Lite SmartPro - page 7

    7 Basic Operation Buttons (Front P anel) “ON/OFF/ST ANDBY” Button • T o turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/ST ANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time fr ...

  • Tripp Lite SmartPro - page 8

    Basic Operation continued Indicator Lights (Front P anel) All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source. The LED flashes and an alarm sounds (4 short beeps fo ...

  • Tripp Lite SmartPro - page 9

    9 Basic Operation continued Other UPS Features (Rear P anel) AC Receptacles: Y our UPS features IEC320-C13 outlets, and select models also feature IEC320-C19 outlets. These output receptacles provide your con- nected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment con ...

  • Tripp Lite SmartPro - page 10

    Basic Operation continued Accessory Slot: Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’ s manual for installation instructions. Contact T ripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP , network m ...

  • Tripp Lite SmartPro - page 11

    11 Storage and Service Storage Before storing your U PS, turn it completely OFF: with the UPS ON and receiving utility power , press and hold the “ON/OFF/ST ANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time ...

  • Tripp Lite SmartPro - page 12

    12 Battery Replacement Model SMX500RT1U SMX750RT1U SMX1000RT2U SMX1500XLRT2U SMX3000XLRT2U Series # AGSMX500RT1U AGSM751SRM1U AGSM4724 AGSM152DRTI2U AGSM4878 Input Nominal V oltage/Frequency: 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz Suggested Circuit: 10 amp 10 amp 10 amp 10 amp 20 amp Output Capacity (V ...

  • Tripp Lite SmartPro - page 13

    1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 200407003 93-2259_EN ...

Produzent Tripp Lite Kategorie Uninterruptible power supply (

Dokumente, die wir vom Produzenten des Geräts Tripp Lite SmartPro erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Tripp Lite
- Bedienungsanleitungen SmartPro
- Produktkarten Tripp Lite
- Informationsbroschüren
- oder Energieetiketten Tripp Lite SmartPro
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Tripp Lite SmartPro.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Tripp Lite SmartPro, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Tripp Lite SmartPro. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Tripp Lite SmartPro ansehen.

Die komplette Bedienungsanleitung des Geräts Tripp Lite SmartPro, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Tripp Lite SmartPro hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Tripp Lite SmartPro verständlich ist.

Eine gänzliche Bedienungsanleitung von Tripp Lite sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Tripp Lite SmartPro bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Tripp Lite SmartPro befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Tripp Lite SmartPro, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Tripp Lite SmartPro - die uns die ersten Schritte während der Nutzung von Tripp Lite SmartPro erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Tripp Lite SmartPro hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Tripp Lite SmartPro im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Tripp Lite SmartPro?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Tripp Lite SmartPro nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Tripp Lite SmartPro hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)