Manuel d’utilisation Tripp Lite SmartPro

13 pages Non applicable
Télécharger

Aller à la page of 13

Summary
  • Tripp Lite SmartPro - page 1

    Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Mounting 3 Quic k Installation 5 Basic Operation 7 Storage and Service 11 Español Copyright ©2004 T ripp Lite. All rights reserved. SmartPro ® is a registered trademark of T ripp Lite. Smar tPr o ? ...

  • Tripp Lite SmartPro - page 2

    2 Impor tant Safety Instructions SA VE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all T ripp Lite UPS Systems. Failure to heed these warnings will void your warranty . UPS Location W arnings • Use caution when lifting your UPS. Because of the considerabl ...

  • Tripp Lite SmartPro - page 3

    3 Mounting (Rac k) Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures des ...

  • Tripp Lite SmartPro - page 4

    Mounting (Rac k) continued 2-P ost (T elecom) Mounting Mount 1U UPS models in 2-post racks with user-supplied hardware following the procedure below . If you mount 2U UPS models in 2-post racks, they require the addition of a T ripp Lite 2-Post Rackmount Installation Kit (model: 2POSTRMKIT , sold separately). See Installation Kit owner ’ s manual ...

  • Tripp Lite SmartPro - page 5

    5 Quic k Installation Unplug computer’ s power cord from both A C outlet and computer’ s A C input. Insert the female plug of com- puter’ s cord into UPS’ s AC input. Insert the male plug of computer’ s cord into A C outlet.* NOTE! after you plug the UPS into a live AC outlet, the UPS (in “S tandby” mode) will automatically charge its ...

  • Tripp Lite SmartPro - page 6

    Optional Installation These connections are optional. Y our UPS will function properly without these connections. Note: SMX3000XLR T2U shown in all diagrams. USB and RS-232 Serial Communications (all models) Use the included USB cable (see ) and/or DB9 serial cable (see ) to connect the communication port on your computer to the communication port ...

  • Tripp Lite SmartPro - page 7

    7 Basic Operation Buttons (Front P anel) “ON/OFF/ST ANDBY” Button • T o turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/ST ANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time fr ...

  • Tripp Lite SmartPro - page 8

    Basic Operation continued Indicator Lights (Front P anel) All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source. The LED flashes and an alarm sounds (4 short beeps fo ...

  • Tripp Lite SmartPro - page 9

    9 Basic Operation continued Other UPS Features (Rear P anel) AC Receptacles: Y our UPS features IEC320-C13 outlets, and select models also feature IEC320-C19 outlets. These output receptacles provide your con- nected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment con ...

  • Tripp Lite SmartPro - page 10

    Basic Operation continued Accessory Slot: Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’ s manual for installation instructions. Contact T ripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP , network m ...

  • Tripp Lite SmartPro - page 11

    11 Storage and Service Storage Before storing your U PS, turn it completely OFF: with the UPS ON and receiving utility power , press and hold the “ON/OFF/ST ANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time ...

  • Tripp Lite SmartPro - page 12

    12 Battery Replacement Model SMX500RT1U SMX750RT1U SMX1000RT2U SMX1500XLRT2U SMX3000XLRT2U Series # AGSMX500RT1U AGSM751SRM1U AGSM4724 AGSM152DRTI2U AGSM4878 Input Nominal V oltage/Frequency: 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz Suggested Circuit: 10 amp 10 amp 10 amp 10 amp 20 amp Output Capacity (V ...

  • Tripp Lite SmartPro - page 13

    1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 200407003 93-2259_EN ...

Fabricant Tripp Lite Catégorie Uninterruptible power supply (

Les documents que nous recevons du fabricant de l'appareilTripp Lite SmartPro peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Tripp Lite
- manuels d’utilisations SmartPro
- fiches produit Tripp Lite
- dépliants
- ou étiquettes-énergie Tripp Lite SmartPro
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Tripp Lite SmartPro.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Tripp Lite SmartPro, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Tripp Lite SmartPro. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Tripp Lite SmartPro.

Manuel d’utilisation complet de l’appareil Tripp Lite SmartPro, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Tripp Lite SmartPro par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Tripp Lite SmartPro.

Le manuel d’utilisation complet Tripp Lite, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Tripp Lite SmartPro - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Tripp Lite SmartPro, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTripp Lite SmartPro qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Tripp Lite SmartPro - qui devraient nous aider dans les premières étapes lors de l'utilisation Tripp Lite SmartPro
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Tripp Lite SmartPro
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Tripp Lite SmartPro dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Tripp Lite SmartPro?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Tripp Lite SmartPro, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Tripp Lite SmartPro il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)