Manual Tripp Lite SmartPro

13 pages Not applicable
Download

Go to site of 13

Summary
  • Tripp Lite SmartPro - page 1

    Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .tripplite.com Impor tant Safety Instructions 2 Mounting 3 Quic k Installation 5 Basic Operation 7 Storage and Service 11 Español Copyright ©2004 T ripp Lite. All rights reserved. SmartPro ® is a registered trademark of T ripp Lite. Smar tPr o ? ...

  • Tripp Lite SmartPro - page 2

    2 Impor tant Safety Instructions SA VE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operation and storage of all T ripp Lite UPS Systems. Failure to heed these warnings will void your warranty . UPS Location W arnings • Use caution when lifting your UPS. Because of the considerabl ...

  • Tripp Lite SmartPro - page 3

    3 Mounting (Rac k) Mount your equipment in either a 4-post or 2-post rack or rack enclosure (see next page for 2-post mounting). The user must determine the fitness of hardware and procedures before mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your rack or rack enclosure. The procedures des ...

  • Tripp Lite SmartPro - page 4

    Mounting (Rac k) continued 2-P ost (T elecom) Mounting Mount 1U UPS models in 2-post racks with user-supplied hardware following the procedure below . If you mount 2U UPS models in 2-post racks, they require the addition of a T ripp Lite 2-Post Rackmount Installation Kit (model: 2POSTRMKIT , sold separately). See Installation Kit owner ’ s manual ...

  • Tripp Lite SmartPro - page 5

    5 Quic k Installation Unplug computer’ s power cord from both A C outlet and computer’ s A C input. Insert the female plug of com- puter’ s cord into UPS’ s AC input. Insert the male plug of computer’ s cord into A C outlet.* NOTE! after you plug the UPS into a live AC outlet, the UPS (in “S tandby” mode) will automatically charge its ...

  • Tripp Lite SmartPro - page 6

    Optional Installation These connections are optional. Y our UPS will function properly without these connections. Note: SMX3000XLR T2U shown in all diagrams. USB and RS-232 Serial Communications (all models) Use the included USB cable (see ) and/or DB9 serial cable (see ) to connect the communication port on your computer to the communication port ...

  • Tripp Lite SmartPro - page 7

    7 Basic Operation Buttons (Front P anel) “ON/OFF/ST ANDBY” Button • T o turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the “ON/OFF/ST ANDBY” button for one second.** Release the but- ton. If utility power is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply power for a limited time fr ...

  • Tripp Lite SmartPro - page 8

    Basic Operation continued Indicator Lights (Front P anel) All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source. The LED flashes and an alarm sounds (4 short beeps fo ...

  • Tripp Lite SmartPro - page 9

    9 Basic Operation continued Other UPS Features (Rear P anel) AC Receptacles: Y our UPS features IEC320-C13 outlets, and select models also feature IEC320-C19 outlets. These output receptacles provide your con- nected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment con ...

  • Tripp Lite SmartPro - page 10

    Basic Operation continued Accessory Slot: Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’ s manual for installation instructions. Contact T ripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP , network m ...

  • Tripp Lite SmartPro - page 11

    11 Storage and Service Storage Before storing your U PS, turn it completely OFF: with the UPS ON and receiving utility power , press and hold the “ON/OFF/ST ANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extended period of time ...

  • Tripp Lite SmartPro - page 12

    12 Battery Replacement Model SMX500RT1U SMX750RT1U SMX1000RT2U SMX1500XLRT2U SMX3000XLRT2U Series # AGSMX500RT1U AGSM751SRM1U AGSM4724 AGSM152DRTI2U AGSM4878 Input Nominal V oltage/Frequency: 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz 230V AC, 50/60Hz Suggested Circuit: 10 amp 10 amp 10 amp 10 amp 20 amp Output Capacity (V ...

  • Tripp Lite SmartPro - page 13

    1111 W . 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www .tripplite.com 200407003 93-2259_EN ...

Manufacturer Tripp Lite Category Uninterruptible power supply (

Documents that we receive from a manufacturer of a Tripp Lite SmartPro can be divided into several groups. They are, among others:
- Tripp Lite technical drawings
- SmartPro manuals
- Tripp Lite product data sheets
- information booklets
- or energy labels Tripp Lite SmartPro
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tripp Lite SmartPro.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tripp Lite SmartPro, service manual, brief instructions and user manuals Tripp Lite SmartPro. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tripp Lite SmartPro.

A complete manual for the device Tripp Lite SmartPro, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tripp Lite SmartPro by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tripp Lite SmartPro.

A complete Tripp Lite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tripp Lite SmartPro - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tripp Lite SmartPro, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tripp Lite SmartPro, that we can find in the current document
3. Tips how to use the basic functions of the device Tripp Lite SmartPro - which should help us in our first steps of using Tripp Lite SmartPro
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tripp Lite SmartPro
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tripp Lite SmartPro in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tripp Lite SmartPro?

Use the form below

If you did not solve your problem by using a manual Tripp Lite SmartPro, ask a question using the form below. If a user had a similar problem with Tripp Lite SmartPro it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)