-
Cleveland IA-MKDL-150-CC - page 1
Cle v eland Range Inc. 1333 East 179th St., Cle veland, Ohio , U.S .A. 44110 Ph : 1-216-481-4900 Fx : 1-216-481-3782 Visit our W eb Site at www .clevelandrange.com Cook/Chill Systems SECT . XIV PA GE 11 1201 COOK/CHILL INCLINED AGIT A T O R ST A TIONARY MIXER KETTLES MODELS : IA-MKDL-60-CC IA-MKDL-200-CC IA-MKDL- 100-CC IA-MKDL-300- ...
-
Cleveland IA-MKDL-150-CC - page 2
SECT . XIV PA GE 12 0600 Litho in USA Cleveland Range reserves right of design improvement or modification, as warranted. DIMENSIONS MODEL A B C D E F ELECTRICAL PER KETTLE - R.P .M. 208V/ 3PH/60Hz IA-MKDL-60-CC 32" 52" 64" 45 1/2" 8" 24" 10 AMPS 6-35 IA-MKDL-100-CC 39" 58 1/2" 70" 49 1/2" 9" 2 ...
-
Cleveland IA-MKDL-150-CC - page 3
...
-
Cleveland IA-MKDL-150-CC - page 4
...
-
Cleveland IA-MKDL-150-CC - page 5
...
-
Cleveland IA-MKDL-150-CC - page 6
...
-
Cleveland IA-MKDL-150-CC - page 7
...
-
Cleveland IA-MKDL-150-CC - page 8
CLEVELAND RANGE, LLC. Cleveland Range, LLC. 1333 East 179 th Street Cleveland, OH 44110 Phone: (216) 481-4900 Fax: (216) 481-3782 http://www.clevelandrange.com MIXER KETTLES Kettle Placement Level Centered on hoist rail All legs bolted to floor Gear box properly supported Proper clearance Pasta basket and batch bucket cleara ...
-
Cleveland IA-MKDL-150-CC - page 9
...
-
Cleveland IA-MKDL-150-CC - page 10
...
-
Cleveland IA-MKDL-150-CC - page 11
...
-
Cleveland IA-MKDL-150-CC - page 12
...
-
Cleveland IA-MKDL-150-CC - page 13
...
-
Cleveland IA-MKDL-150-CC - page 14
...
-
Cleveland IA-MKDL-150-CC - page 15
...
-
Cleveland IA-MKDL-150-CC - page 16
...
-
Cleveland IA-MKDL-150-CC - page 17
...
-
Cleveland IA-MKDL-150-CC - page 18
...
-
Cleveland IA-MKDL-150-CC - page 19
...
-
Cleveland IA-MKDL-150-CC - page 20
...
-
Cleveland IA-MKDL-150-CC - page 21
...
-
Cleveland IA-MKDL-150-CC - page 22
...
-
Cleveland IA-MKDL-150-CC - page 23
...
-
Cleveland IA-MKDL-150-CC - page 24
...
-
Cleveland IA-MKDL-150-CC - page 25
...
-
Cleveland IA-MKDL-150-CC - page 26
...
-
Cleveland IA-MKDL-150-CC - page 27
_______________________________________________________________________ _ INCLINED AGITATOR KETTLE OPERATING AND CLEANING INSTRUCTIONS OPERATING INSTRUCTIONS Your kettle has been equipped with a control panel that has some or all of the following functions: 12. Main POWER switch 13. Temperature control 14. 24 hour chart recorder 15. KETTLE RUN push ...
-
Cleveland IA-MKDL-150-CC - page 28
_______________________________________________________________________ _ Ready to pump food out of kettle (Metering Filling Station, MFS, should be connected to the kettle during the sanitation process) 6. Foods must be cooked to a minimum of 165 ° F to kill dangerous pathogens and must be at least this temperature when it casings are filled. Set ...
-
Cleveland IA-MKDL-150-CC - page 29
_______________________________________________________________________ _ 7. Rinse out food debris from the kettle and flush through the metering filling station (MFS or food pump) if they are still connected. If the kettle is not connected to the food pump, open the valve and allow rinse water to flush into the floor drain. 8. Remove agitator arm: ...
-
Cleveland IA-MKDL-150-CC - page 30
_______________________________________________________________________ _ DAILY PRE-START UP 4. The operator must check the kettle, springs and scraper blades for proper installation before turning kettle on. 5. Make sure the connecting coupling from the drive shaft to the agitator is properly installed with the quick release pin fully engaged. 6. ...
-
Cleveland IA-MKDL-150-CC - page 31
_______________________________________________________________________ _ PREVENTIVE MAINTENANCE COOK/CHILL MIXER & PASTA KETTLES A. AUTOMATIC DUMP VALVE Weekly - Check air collector regulator for moister, dirt, and proper pressure - Check all orings and seals and gaskets - Check valve operation - Lubricate with light oil when needed - Check ai ...
-
Cleveland IA-MKDL-150-CC - page 32
_______________________________________________________________________ _ PREVENTIVE MAINTENANCE COOK/CHILL MIXER & PASTA KETTLES (continued) E. SAFETY VALVE Weekly - Check for leakage - Steam pressure 65 psi. max. - Safety set at 100 psi. F. LEAKS Weekly - Check for leaks of any type ( water - steam - hydraulic ) ( Leaks take away from perform ...
-
Cleveland IA-MKDL-150-CC - page 33
________________________________________________________________________ IA-MKDL-60-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90psi. ...
-
Cleveland IA-MKDL-150-CC - page 34
________________________________________________________________________ I A -MKDL-100-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90p ...
-
Cleveland IA-MKDL-150-CC - page 35
________________________________________________________________________ I A -MKDL-150-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90p ...
-
Cleveland IA-MKDL-150-CC - page 36
________________________________________________________________________ I A -MKDL-200-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90p ...
-
Cleveland IA-MKDL-150-CC - page 37
________________________________________________________________________ I A -MKDL-300-CC • Make sure kettle is level, equipment can move as floors settle • Make sure kettle is bolted securely to floor, bolts may loosen after time • Check the incoming power and amp draws (per rating plate) • Check incoming air pressure (_” line 1cfm @ 90p ...
¿Tienes una pregunta acerca de Cleveland IA-MKDL-150-CC?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cleveland IA-MKDL-150-CC, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cleveland IA-MKDL-150-CC probablemente compartirá una forma de solucionarlo.